Antioxidant and prooxidant activities of tea polyphenols in oil-in-water emulsions depend on the level used and the location of proteins.

We studied the impacts of protein location (interface or aqueous phase) on the antioxidant and prooxidant activities of tea polyphenols (TP) in model oil-in-water emulsions (pH 7) at a low (0.01% w/v) or high (0.04 % w/v) concentration. TP at 0.01% reduced the levels of both lipid and protein oxidation markers in emulsions, independent of the protein location. However, TP were more potent when proteins were located at the interface. At 0.04%, TP were only weakly antioxidant towards lipids but were prooxidant towards proteins in emulsions with proteins at the interface, whereas they were still somewhat antioxidant for aqueous phase proteins. These results indicate that TP may act as either antioxidants or prooxidants depending on their concentration and also on the location of the proteins in emulsions. The level of TP should be optimized for emulsion-based foods or beverages to achieve optimum antioxidant activity.

Formation of Antioxidant Multilayered Coatings for the Prevention of Lipid and Protein Oxidation in Oil-in-Water Emulsions: Lycium barbarum Polysaccharides and Whey Proteins.

The impact of Lycium barbarum polysaccharides (LBPs) on the physical and chemical stability of oil-in-water emulsions coated by a whey protein isolate (WPI) was investigated. At pH 3.0, the anionic LBP (0.2-0.6 wt %) molecules were electrostatically deposited onto the cationic surfaces of the WPI-coated oil droplets, leading to the formation of stable multilayered emulsions containing WPI-/LBP-coated oil droplets. However, increasing the LBP concentration to 0.8 wt % led to oil droplet aggregation, which was attributed to charge neutralization, bridging flocculation, and/or depletion flocculation. For subsequent experiments, a low (0.2%) and an intermediate (0.6%) LBP dose was used to prepare the secondary emulsions, and then their physical and oxidative stability was studied during 8 days of storage at 37 °C. The presence of the multilayer WPI/LBP coatings around the oil droplets inhibited lipid oxidation (reduced levels of lipid hydroperoxides and 2-thiobarbituric acid-reactive substances), as well as protein oxidation (reduced levels of carbonyl formation, sulfhydryl consumption, molecular weight modifications, intrinsic fluorescence loss, and Schiff-base fluorescence gain). The antioxidant effects of the multilayer coatings were greater at the higher LBP concentration. These results suggest that LBP, a natural plant-based polysaccharide isolated from a traditional Chinese medicine, can be used to improve the quality of emulsion-based foods. However, the level used should be optimized to ensure good physical and oxidative stability of the emulsions.

Impact of tea polyphenols on the stability of oil-in-water emulsions coated by whey proteins.

The ability of tea polyphenols (0, 0.01, 0.02 or 0.04 w/v %) to inhibit lipid and protein oxidation in walnut oil-in-water (O/W) emulsions was examined, as well as to alter their stability to aggregation and creaming. The lipid droplets in these emulsions were coated by whey proteins. The physical stability of the emulsions during storage (50 °C, 96 h) was improved by addition of 0.01% tea polyphenols, but reduced when higher levels were added. Low levels (0.01%) of tea polyphenols inhibited lipid oxidation (lipid hydroperoxide and 2-thiobarbituric acid-reactive substance formation) and protein oxidation (carbonyl and Schiff base formation, sulfhydryl and intrinsic fluorescence loss, and molecular weight changes). However, high levels (0.04%) of tea polyphenols were less effective at inhibiting lipid oxidation, and actually promoted protein oxidation. Tea polyphenols are natural antioxidants that can enhance the quality and shelf life of emulsified polyunsaturated lipids when used at an appropriate concentration.

Adsorption capacity and cold-water solubility of honeycomb-like potato starch granule.

Honeycomb-like granules, with 2-4 µm pores on the surface, were prepared by heating potato starch suspensions in water at the pasting temperature. These granules with a yield of 84% were most amorphous (relative crystallinity 1.9%). Their total pore area was 0.668 m2/g, porosity was 73.4%, and mean particle size (D50) was 154.3 µm. The molecular weights (MW) of honeycomb-like granules were: amylopectin, 8.7 × 107 g/mol; amylose, 3.1 × 105 g/mol, close to those of native starch. The chain length distribution profiles of honeycomb-like granules were similar to those of native starch, while the proportions of B2 and B3 chains were higher. The water and oil adsorption of honeycomb-like granules were about 1.5 and 2.4 times those of native starch, respectively; and the cold water solubility of honeycomb-like granules was 88.5%, while native starch showed no solubility in cold water. Thus honeycomb-like starch granules have the potential to be applied as adsorbents, thickeners and adhesives for their dispersibility, adsorption capacity and cold water solubility.

Comparison of natural and synthetic surfactants at forming and stabilizing nanoemulsions: Tea saponin, Quillaja saponin, and Tween 80.

HYPOTHESIS: This study compared the interfacial and emulsification properties of tea saponins, quillaja saponins, and Tween 80. We hypothesized that tea saponins are an effective and sustainable source of plant-based emulsifiers that could replace synthetic or animal-based emulsifiers in many commercial applications. EXPERIMENTS: Interfacial tension measurements were used to characterize the behavior of the three surfactants at an oil-water interface. The emulsifying properties of the surfactants were determined by preparing oil-in-water emulsions containing 10 wt% medium chain triglycerides (MCT) and varying surfactant levels (0.1-2 wt%) using high-pressure homogenization (pH 7). The impact of surfactant type on emulsion formation and stability was determined by measuring particle size, zeta-potential, microstructure, and creaming stability. FINDINGS: The tea saponins were capable of producing nano-scale droplets (d32 < 200 nm) at low surfactant-to-oil ratios (SOR < 0.1). Emulsions containing tea saponins remained stable to droplet aggregation when exposed to various temperatures (30-90 °C), salt levels (0-200 mM NaCl), and pH values (3-9). However, droplet flocculation and/or coalescence occurred under highly acidic (pH 2) and high ionic strength (300-500 mM NaCl) conditions. Tea saponin-coated oil droplets appeared to be mainly stabilized by a combination of electrostatic and steric repulsion. The tea saponins behaved similarly or better than the other two emulsifiers under most conditions. These results suggest that tea saponins are effective plant-based surfactants that may have applications in commercial products.

Impact of Interfacial Composition on Lipid and Protein Co-Oxidation in Oil-in-Water Emulsions Containing Mixed Emulisifers.

The impact of interfacial composition on lipid and protein co-oxidation in oil-in-water emulsions containing a mixture of proteins and surfactants was investigated. The emulsions consisted of 5% v/v walnut oil, 0.5% w/v whey protein isolate (WPI), and 0 to 0.4% w/v Tween 20 (pH 3 and pH 7). The protein surface load, magnitude of the ξ-potential, and mean particle diameter of the emulsions decreased as the Tween 20 concentration was increased, indicating the whey proteins were displaced by this nonionic surfactant. The whey proteins were displaced from the lipid droplet surfaces more readily at pH 3 than at pH 7, which may have been due to differences in the conformation or interactions of the proteins at the droplet surfaces at different pH values. Emulsions stabilized by whey proteins alone had relatively low lipid oxidation rates when incubated in the dark at 45 °C for up to 8 days, as determined by measuring lipid hydroperoxides and 2-thiobarbituric acid-reactive substances (TBARS). Conversely, the whey proteins themselves were rapidly oxidized, as shown by carbonyl formation, intrinsic fluorescence, sulfhydryl group loss, and electrophoresis measurements. Displacement of whey proteins from the interface by Tween 20 reduced protein oxidation but promoted lipid oxidation. These results indicated that the adsorbed proteins were more prone to oxidation than the nonadsorbed proteins, and therefore, they could act as better antioxidants. Protein oxidation was faster, while lipid oxidation was slower at pH 3 than at pH 7, which was attributed to a higher antioxidant activity of whey proteins under acidic conditions. These results highlight the importance of interfacial composition and solution pH on the oxidative stability of emulsions containing mixed emulsifiers.

The prooxidant activity of salts on the lipid oxidation of lecithin-stabilized oil-in-water emulsions.

Salts reduction/substitution have gained a lot interest from food industry since the US Food and Drug Administration (FDA) has issued a draft guidance for salt reduction. However how changes of salts in food formulation could influence lipid oxidation is still not fully understood. Using oil-in-water emulsions stabilized by a natural emulsifier - lecithin at pH 7.0 as a model system, this study evaluated how salts affect the physical parameters of the emulsion, the chelating activity of lecithin and thus the lipid oxidation of these emulsions. Results showed that salts increased the particle size, the negative charge of the oil droplets, and the amount of iron chelated by lecithin. Lipid oxidation lag phases were shortened by addition of salts, by 1 day and 2 days for lipid hydroperoxides and thiobarbituric acid reactive substances measurements respectively. These results provide some new insights on the mechanisms of how salts could affect the lipid oxidation of food emulsions.

Ultrasound improving the physical stability of oil-in-water emulsions stabilized by almond proteins.

BACKGROUND: Vegetable proteins are increasingly used to stabilize oil-in-water (O/W) emulsions. However, emulsions are thermodynamically unstable. Recently, high-intensity ultrasound (US) has been used to enhance the stability of emulsions. For these reasons, and considering almond (Prunus dulcis L.) as a good source of high-quality proteins, the aim of this work was to investigate the effect of US treatment on the stability of pre-emulsification O/W emulsions coated with almond protein isolate (API). RESULTS: The influence of API concentration (0.25-2.0 g L-1 ), ion strength (0-500 mmol L-1 NaCl), and pH (3.0-7.0) on the stability of US-treated emulsions was evaluated. US treatment (200-600 W, 25 kHz, 15 min) led to a significant reduction in the particles size of droplets in emulsions, increased critical osmotic pressure and additional protein interfacial adsorption, and thus the formation of more stable emulsions. The more unfolded and random coil structures of the proteins were detected at higher US power, facilitating protein interfacial adsorption. Increasing API concentrations resulted in higher stability of US-treated emulsions against untreated counterparts. The US-treated emulsions were more resistant to salt than untreated samples. In the range from pH 3.0 to7.0, US treatment also enhanced the physical stability of emulsions compared with untreated emulsions. CONCLUSION: US technology could be applied to produce more stable O/W food emulsions stabilized by proteins. © 2018 Society of Chemical Industry.

Influence of aqueous phase emulsifiers on lipid oxidation in water-in-walnut oil emulsions.

Effects of selected aqueous phase emulsifiers on lipid oxidative stability of water-in-walnut oil (W/O) emulsions stabilized by polyglycerol polyricinoleate (PGPR) were evaluated. The formation of primary oxidation products (lipid hydroperoxides) and secondary oxidation products (headspace hexanal) increased with increasing dodecyltrimethylammonium bromide (DTAB) concentration (0.1-0.2 wt % of emulsions). In contrast, the addition of sodium dodecyl sulfate (SDS) in the aqueous phase reduced lipid hydroperoxide and hexanal formation. In addition, the presence of Tween 20 in the aqueous phase did not significantly influence lipid oxidation rates in W/O emulsions compared to the control (without Tween 20). Whey protein isolate (WPI) was observed to inhibit lipid oxidation in the W/O emulsions (0.05-0.2 wt % of emulsions). Aqueous phase pH had an important impact on the antioxidant capability of WPI, with higher pH improving its ability to inhibit lipid oxidation. The combination of WPI and DTAB in the aqueous phase suppressed the prooxidant effect of DTAB. The combination of WPI and SDS resulted in improved antioxidant activity, with inhibition being greater at pH 7.0 than at pH 3.0. These results suggest that the oxidative stability of W/O emulsions could be improved by the use of suitable emulsifiers in the aqueous phase.