Evaluation of fuel properties for possible biodiesel output based on the fatty acid composition of oleaginous plants and microalgae.

In the past decade, there has been a significant rise in sustainable biomass based biofuel production to address energy needs while mitigating environmental impacts. Traditionally, bioethanol was used for biofuel production, but concerns over food security and environmental preservation have led to growing interest in alternative sources such as neutral lipids from vegetable oil and microalgae for biodiesel production. This research paper evaluates the potential of various oleaginous plants and microalgae as feedstocks for biodiesel production, with a focus on their fatty acid composition and its impact on biodiesel properties. The study examines the fatty acid profiles of 43 different plant and microalgae species and employs various equations to estimate key physical properties of biodiesel. Additionally, the communication compares these properties to International Biodiesel Standards (EN 14214 and ASTM D6751-08) to assess the suitability of the derived biodiesel for commercial use. It is impossible to describe a single composition that is optimal in terms of all essential fuel properties due to the opposing effects of some structural features of the Fatty Acid Methyl Esters (FAME). However, biodiesel should contain relatively low concentrations of both long chain saturated and polyunsaturated FAME to ensure adequate efficiency in terms of low temperature operability and oxidative stability. The results reveal significant variations in properties amongst different feedstocks, highlighting the importance of feedstock selection in biodiesel production. The study also establishes correlations between various fuel properties, providing valuable insights in to optimizing biodiesel production processes, which will be of great use to researchers, engineers, and stakeholders involved in biodiesel production.

Methyl oleate for plant protection products formulations: Enzymatic synthesis, reaction kinetics and application testing.

This study presents a solvent-free enzymatic approach for the synthesis of fatty acid methyl esters (FAMEs), such as methyl oleate, for their application as adjuvant in plant protection products (PPP) formulations. The direct esterification between free fatty acid and methanol was optimized to achieve 98% acid conversion. The kinetics of this conversion was accurately described by a simple second order mechanism and non-linear regression was applied to calculate the rate constants of the forward and backward reactions based on full progress curves data. The rate constant of the forward reaction (synthesis) was one order of magnitude higher than the backward reaction (hydrolysis) and favored formation of the target methyl ester product, rendering the removal of water unnecessary. Enzymatically synthesized methyl oleate was benchmarked against the chemically synthesized compound, showing matching results in terms of stability, spreadability and emulsifying capacity in plant care formulations. The enzymatic synthesis of FAMEs under solvent free conditions allows to achieve a safer and more sustainable character for carrier solvents in PPP formulations.

Development and validation of a HPLC-MS/MS method for the analysis of fatty acids - in the form of FAME ammonium adducts - in human whole blood and erythrocytes to determine omega-3 index.

Recent scientific studies in the field of health and nutrition have unanimously affirmed the importance of consuming the omega-3 fatty acids, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), because of their cardioprotective properties. Fatty acid profiling in erythrocyte membranes allows the omega-3 index, which is a recognized indicator of the risk of developing cardiovascular disease, to be calculated. One consequence of the upward trend in healthy lifestyles and longevity is an increase in the number of studies into the omega-3 index, which requires a reliable method for the quantitative analysis of fatty acids. This article describes the development and validation of a sensitive and reproducible liquid chromatography tandem mass spectrometry (HPLC-MS/MS) method for the quantitative analysis of 23 fatty acids (in the form of fatty acid methyl esters, FAMEs) in 40 µl of whole blood and erythrocytes. The list of acids includes saturated, omega-9 unsaturated, omega-6 unsaturated and omega-3 unsaturated fatty acids as well as their trans-isomers. The limit of quantitation was 250 ng ml-1 for C12:0, C16:0 and C18:0; and 62.5 ng ml-1 for other FAMEs, including EPA, DHA and trans-isomers of FAME C16:1, C18:1 and C18:2 n-6. Sample preparation for fatty acid (FA) esterification/methylation with boron trifluoride-methanol (BF3) has been optimized. Chromatographic separation has been carried out on a C8 column in gradient mode using a mixture of acetonitrile, isopropanol and water with the addition of 0.1% formic acid and 5 mM ammonium formate. As a result, the problem of separating the cis- and trans-isomers of FAME C16:1, C18:1 and C18:2 n-6 has been solved. The electrospray ionization mass spectrometry (ESI-MS) detection of FAMEs, in the form of ammonium adducts, has been optimized for the first time, which has made the method more sensitive that when the protonated species are used. This method has been applied to 12 samples from healthy subjects that consumed omega-3 supplements and has proven to be a reliable tool for determining the omega-3 index.

HPLC/HRMS and GC/MS for Triacylglycerols Characterization of Tuna Fish Oils Obtained from Green Extraction.

BACKGROUND: Fish oil is one of the most common lipidic substances that is consumed as a dietary supplement. The high omega-3 fatty acid content in fish oil is responsible for its numerous health benefits. Fish species such as mackerel, herring, tuna, and salmon are particularly rich in these lipids, which contain two essential omega-3 fatty acids, known as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). OBJECTIVES: Due to the scarcity of information in the literature, this study aimed to conduct a qualitative and quantitative characterization of triglycerides (TAGs) in crude tuna fish oil using HPLC/HRMS. Fatty acid (FA) determination was also performed using GC/MS. The tuna fish oils analyzed were produced using a green, low-temperature process from the remnants of fish production, avoiding the use of any extraction solvents. RESULTS: The analyses led to the tentative identification and semi-quantitation of 81 TAGs. In silico saponification and comparison with fatty acid methyl ester results helped to confirm the identified TAGs and their quantities. The study found that the produced oil is rich in EPA, DHA, and erucic acid, while the negligible isomerization of fatty acids to trans-derivatives was observed.

GC-MS, FTIR and Raman spectroscopic analysis of fatty acids of Pistacia vera (Greek variety "Aegina") oils from two consecutive harvest periods and chemometric differentiation of oils quality.

Pistacia vera oil is a rich source of unsaturated fatty acids, whose presence is associated with high quality and nutritional value. According to the literature, fatty acid oil composition is not constant every harvest year, but varies mainly depending on climate conditions. Therefore, the knowledge of oil composition in fatty acids is necessary to assess both its quality and its nutritional value. Twenty-two samples (11 samples from the harvest year 2017 and 11 samples from 2018) of the Greek variety "Aegina" were collected from four different Greek regions, from producers following the same cultivation and post-harvest cares. Extraction oil yields were found to be similar (61.7% w/w, 2017; 60.8% w/w, 2018). A reduction of the saturated fatty acids content was determined in 2018 (mean values 12.2% w/w against 13.8% w/w in 2017) by Gas Chromatography-Mass Spectrometry, accompanied by an increase of the unsaturated ones (mean values 87.9% w/w against 86.2% w/w in 2017). These results indicate that the harvest year 2018 may be considered superior to 2017 in terms of quality and nutritional value and may be correlated with an increased mean rain rate in 2018 and a slight decrease of the mean temperature. Fourier transform infrared (FTIR) and Raman spectroscopic studies of the oils were also performed. Three chemometric models were developed for the two consecutive harvest years of pistachio oil and the discrimination was based on GC-MS analysis, FTIR and Raman spectroscopic data combined with cross-validation techniques and comparison among them. The most successful chemometric model was that based on FTIR spectroscopy, which has the advantage of speed, simplicity and economy. Such a chemometric model may help in estimating the quality of Pistacia vera oils.

Sustainable and Green Synthesis of Stanol Esters from Oil Wastes.

The recombinant lipase ofOphiostoma piceae (OPEr) is characterized by its prominent sterol esterase activity. The protein was immobilized on magnetic nanoparticles, giving four enzyme variants that have been tested in solvent-free transesterification of methyl oleate and sitostanol. The yields of stanol esters reached 85%, and the catalysts can be reused. Stanol esters were also obtained in a two-step cascade reaction; a mixture of fatty acid methyl esters was enzymatically synthesized from cooking oil wastes and then used for stanol transesterification. An 85% conversion was achieved in 2 h from the second cycle onward, maintaining the activity over 5 cycles. The biocatalysts can be safely used since they don't release toxic compounds for HeLa and A549 cell lines. These procedures comply with the principles of green chemistry and contribute to the sustainable production of these nutraceuticals from secondary raw materials, like the lipid fraction from industrial or agricultural residues.

Chemical Characterization of Two California-Grown Avocado Varieties (Persea americana Mill.) over the Harvest Season with an Emphasis on Sensory-Directed Flavor Analysis.

The research objective was to characterize avocado's aroma-active volatiles and use information about its overall composition, such as lipid profile, to discuss likely biosynthetic origins. To achieve this, two varieties, "Hass" and "3-29-5" (GEM), were evaluated during their commercial harvest period for dry weight, moisture content (freeze-drying), oil content (Soxhlet extraction), fatty acid composition, and aroma profile. Solvent-assisted flavor evaporation and aroma extract dilution analysis were performed on aroma extracts. Oleic acid (>50%) was the prominent fatty acid in the oil of both varieties. The majority of the aroma-active compounds in avocado are lipid-derived. The most notable compounds are 1-octen-3-one (mushroom) with a flavor dilution factor as high as 8192, hexanal (grassy), (Z)-4-decenal, an unknown, and (E,E)-2,4-nonadienal. Over the mid-to-late harvest season, a decline in hexanal and an increase in octanal were observed. In contrast to "Hass", the hexanal content was relatively stable in "3-29-5".

Conversion of sugar beet residues into lipids by Lipomyces starkeyi for biodiesel production.

BACKGROUND: Lipids from oleaginous yeasts emerged as a sustainable alternative to vegetable oils and animal fat to produce biodiesel, the biodegradable and environmentally friendly counterpart of petro-diesel fuel. To develop economically viable microbial processes, the use of residual feedstocks as growth and production substrates is required. RESULTS: In this work we investigated sugar beet pulp (SBP) and molasses, the main residues of sugar beet processing, as sustainable substrates for the growth and lipid accumulation by the oleaginous yeast Lipomyces starkeyi. We observed that in hydrolysed SBP the yeast cultures reached a limited biomass, cellular lipid content, lipid production and yield (2.5 g/L, 19.2%, 0.5 g/L and 0.08 g/g, respectively). To increase the initial sugar availability, cells were grown in SBP blended with molasses. Under batch cultivation, the cellular lipid content was more than doubled (47.2%) in the presence of 6% molasses. Under pulsed-feeding cultivation, final biomass, cellular lipid content, lipid production and lipid yield were further improved, reaching respectively 20.5 g/L, 49.2%, 9.7 g/L and 0.178 g/g. Finally, we observed that SBP can be used instead of ammonium sulphate to fulfil yeasts nitrogen requirement in molasses-based media for microbial oil production. CONCLUSIONS: This study demonstrates for the first time that SBP and molasses can be blended to create a feedstock for the sustainable production of lipids by L. starkeyi. The data obtained pave the way to further improve lipid production by designing a fed-batch process in bioreactor.

Profiling analysis of phospholipid fatty acids in serum as a complement to the comprehensive fatty acids method.

Fatty acids (FAs) are mostly found in blood as triglycerides, phospholipids (PLs) and cholesteryl esters. Determination of FAs is typically carried out in serum or plasma by a comprehensive method (known as the classical FAMEs method since FAs are determined as Fatty Acids Methyl Esters), which is based on liquid-liquid extraction, derivatization by transesterification, and determination by gas chromatography (GC) coupled to a suited detection technique. However, this method does not favor the determination of FAs that are chemically conjugated in PLs due to kinetics impediment. For this reason, we have developed a selective method to determine the FAs profile of PLs in serum based on solid-phase extraction (SPE) for isolation of PLs and determination of the FAME derivatives by GC-mass spectrometry (GC-MS). The method was applied to serum samples collected from twenty-five individuals to compare the FAs profile versus that provided by the non-selective protocol based on liquid-liquid extraction of lipid families. Statistical analysis revealed compositional changes in the FAs profile with special emphasis on the content of saturated (SFAs) and monounsaturated FAs (MUFAs). Thus, SFAs passed from 34.0% with the classical method to 49.3% in PLs while MUFAs went from 24.4% to 11.4%. This study proves that the proposed method provides complementary results to the comprehensive method and, therefore, both methods can be combined to evaluate the effect of intervention diets and their connection to metabolic diseases.

Effect of organic carbon and nutrient supplementation on the digestate-grown microalga, Parachlorella kessleri.

Digested effluents are usually deprived of the appropriate levels of organic carbon or macro- and micro-nutrients to effectively sustain microalgal growth. In this regard, Parachlorella kessleri was cultivated in an agro-waste digestate supplemented with different glucose concentrations, magnesium and trace metals and alternatively with cheese whey (CW), with view to enriching digestate with organic and inorganic constituents and decreasing freshwater demand. Between the conditions tested, CW addition resulted in the highest biomass concentration, 2.68 g L-1 within 18 days of cultivation. Chlorophyll content significantly decreased under 5 g L-1 glucose addition, in contrast to MgSO4 co-addition and CW supplementation. The latter also induced high photosynthetic activity and better-preserved vitality of the photosynthetic apparatus, compared to sole glucose addition. Concerning lipid accumulation, in the presence of high glucose concentration, % of total fatty acids decreased, and the saturated fraction increased over polyunsaturated fatty acids (PUFAs).

Modulation of lipid content and lipid profile by supplementation of iron, zinc, and molybdenum in indigenous microalgae.

The effects of iron (Fe), zinc (Zn), and molybdenum (Mo) on the biomass yield, lipid content, lipid yield, and fatty acid composition of Chlorella sp. NC-MKM, Graesiella emersonii NC-M1, Scenedesmus acutus NC-M2, and Chlorophyta sp. NC-M5 were studied. Among them, G. emersonii NC-M1 recorded the highest percentage increase in lipid content (140.3%) and neutral lipid (50.9%) under Zn-supplemented condition compared to the control. Also, it showed a 105% and 41.88% increase in lipid yield and neutral lipid under Fe-supplemented condition compared to the control. However, Chlorella sp. NC-MKM recorded an elevation in lipid yield (70.3% rise) and neutral lipid (24.32% rise) compared to the control in Mo-supplemented condition. The enhanced production of reactive oxygen species (ROS) and antioxidant enzyme (SOD and POD) under Fe-, Zn-, and Mo-supplemented condition supports the lipid accumulation. FAME analysis showed that the overall percentage of SFA and MUFA increased after the addition of Fe, Zn, and Mo in a culture medium compared to the control which is vital for a good-quality biodiesel. Further, biodiesel properties derived from FAMEs such as CN, SV, IV, CFPP, OS, υ, ρ, and HHV were found in accordance with biodiesel standard.

Microalgae harvest influences the energy recovery: A case study on chemical flocculation of Scenedesmus obliquus for biodiesel and crude bio-oil production.

In the present study, centrifugation was used as a standard harvest method, while chemical flocculation was comparatively used as a cost-effective harvest method for microalgae. Lipid recovery from the centrifuged cells was 17.4%, which significantly increased by flocculation to 20.7%. Although both harvest methods showed similar thermal decomposition patterns, flocculated biomass showed 15.7% higher bio-char formation than the centrifuged cells, which resulted in significant reduction in the bio-oil yield by 18.5%. The estimated energy output of bio-oil using centrifugation and flocculation were 0.87 and 0.68 GJ per ton, respectively. For biodiesel production, the energy output using centrifugation and flocculation were 0.177 and 0.211 GJ per ton, respectively. Due to the higher biodiesel yield, better bio-oil quality and lower energy consumption, flocculation was suggested by the present study as a superior method over centrifugation for microalgae harvest from the economic point of view.

Novel Bacillus cereus strain from electrokinetically remediated saline soil towards the remediation of crude oil.

A new strain SWH-15 was successfully isolated after initial electrokinetic remediation experiment using the same saline soil sampled from Shengli Oilfield, China. Four methods (morphological and biochemical characteristics, whole-cell fatty acid methyl esters (FAMEs) analysis, 16S rRNA sequence analysis and DNA G + C content and DNA-DNA hybridization analysis) were used to identify the taxonomic status of SWH-15 and confirmed that SWH-15 was a novel species of the Bacillus (B.) cereus group. Then, we assessed the degrading ability of the novel strain SWH-15 to crude oil through a microcosm experiment with four treatments, including control (CK), bioremediation using SWH-15 (Bio), electrokinetic remediation (EK), and combined bioremediation and electrokinetic remediation (Bio + EK). The results showed that the Bio + EK combined remediation treatment was more effective than the CK, Bio, and EK treatments in degrading crude oil contaminants. Bioaugmentation, by addition of the strain SWH-15 had synergistic effect with EK in Bio + EK treatment. Bacterial community analysis showed that electrokinetic remediation alone significantly altered the bacterial community of the saline soil. The addition of the strain SWH-15 alone had a weak effect on the bacterial community. However, the strain SWH-15 boosted the growth of other bacterial species in the metabolic network and weakened the impact of electrical field on the whole bacterial community structure in the Bio + EK treatment.

Alternative Oils Tested as Feedstocks for Enzymatic FAMEs Synthesis: Toward a More Sustainable Process.

Previously isolated and characterized Pseudomonas lipases were immobilized in a low-cost MP-1000 support by a re-loading procedure that allowed a high activity per weight of support. Immobilized LipA, LipC, and LipCmut lipases, and commercial Novozym® 435 were tested for fatty acid methyl ester (FAMEs) synthesis using conventional and alternative feedstocks. Triolein and degummed soybean oils were used as model substrates, whereas waste cooking oil and M. circinelloides oil were assayed as alternative, low cost feedstocks, whose free fatty acid (FFA), and acylglyceride profile was characterized. The reaction conditions for FAMEs synthesis were initially established using degummed soybean oil, setting up the best water and methanol concentrations for optimum conversion. These conditions were further applied to the alternative feedstocks and the four lipases. The results revealed that Pseudomonas lipases were unable to use the FFAs, displaying a moderate FAMEs synthesis, whereas a 44% FAMEs production was obtained when M. circinelloides oil was used as a substrate in the reaction catalysed by Novozym® 435, used under the conditions established for degummed soybean oil. However, when Novozym® 435 was tested under previously described optimal conditions for this lipase, promising values of 85 and 76% FAMEs synthesis were obtained for waste cooking oil and M. circinelloides oil, respectively, which might result in promising, nonfood, alternative feedstocks for enzymatic biodiesel production. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1209-1217, 2017.

Theoretical and Kinetic Tools for Selecting Effective Antioxidants: Application to the Protection of Omega-3 Oils with Natural and Synthetic Phenols.

Radical-scavenging antioxidants play crucial roles in the protection of unsaturated oils against autoxidation and, especially, edible oils rich in omega-3 because of their high sensitivity to oxygen. Two complementary tools are employed to select, among a large set of natural and synthetic phenols, the most promising antioxidants. On the one hand, density functional theory (DFT) calculations provide bond dissociation enthalpies (BDEs) of 70 natural (i.e., tocopherols, hydroxybenzoic and cinnamic acids, flavonoids, stilbenes, lignans, and coumarins) and synthetic (i.e., 2,6-di-tert-butyl-4-methylphenol (BHT), 3-tert-butyl-4-hydroxyanisol (BHA), and tert-butylhydroquinone (TBHQ)) phenols. These BDEs are discussed on the basis of structure-activity relationships with regard to their potential antioxidant activities. On the other hand, the kinetic rate constants and number of hydrogen atoms released per phenol molecule are measured by monitoring the reaction of phenols with 2,2-diphenyl-1-picrylhydrazyl (DPPH(•)) radical. The comparison of the results obtained with these two complementary methods allows highlighting the most promising antioxidants. Finally, the antioxidant effectiveness of the best candidates is assessed by following the absorption of oxygen by methyl esters of linseed oil containing 0.5 mmol L(-1) of antioxidant and warmed at 90 °C under oxygen atmosphere. Under these conditions, some natural phenols namely epigallocatechin gallate, myricetin, rosmarinic and carnosic acids were found to be more effective antioxidants than α-tocopherol.

Myricetin, rosmarinic and carnosic acids as superior natural antioxidant alternatives to α-tocopherol for the preservation of omega-3 oils.

22 natural polyphenols are compared to 7 synthetic antioxidants including BHT, BHA, TBHQ and PG with regard to their ability to protect omega-3 oils from autoxidation. The antioxidant efficiency of phenols is assessed using the DPPH test and the measurement of oxygen consumption during the autoxidation of oils rich in omega-3 fatty acids. Also, the bond dissociation enthalpies (BDE) of the Ar-OH bonds are calculated and excellent correlations between thermodynamic, kinetic and oxidation data are obtained. It is shown that kinetic rates of hydrogen transfer, number of radicals scavenged per antioxidant molecule, BDE and formation of antioxidant dimers from the primary radicals play an important role regarding the antioxidant activity of phenols. Based on this, it is finally shown that myricetin, rosmarinic and carnosic acids are more efficient than α-tocopherol and synthetic antioxidants for the preservation of omega-3 oils.

Phosphorus removal coupled to bioenergy production by three cyanobacterial isolates in a biofilm dynamic growth system.

In the present study a closed incubator, designed for biofilm growth on artificial substrata, was used to grow three isolates of biofilm-forming heterocytous cyanobacteria using an artificial wastewater secondary effluent as the culture medium. We evaluated biofilm efficiency in removing phosphorus, by simulating biofilm-based tertiary wastewater treatment and coupled this process with biodiesel production from the developed biomass. The three strains were able to grow in the synthetic medium and remove phosphorus in percentages, between 6 and 43%, which varied between strains and also among each strain according to the biofilm growth phase. Calothrix sp. biofilm turned out to be a good candidate for tertiary treatment, showing phosphorus reducing capacity (during the exponential biofilm growth) at the regulatory level for the treated effluent water being discharged into natural water systems. Besides phosphorus removal, the three cyanobacterial biofilms produced high quality lipids, whose profile showed promising chemical stability and combustion behavior. Further integration of the proposed processes could include the integration of oil extracted from these cyanobacterial biofilms with microalgal oil known for high monounsaturated fatty acids content, in order to enhance biodiesel cold flow characteristics.

Improved gas chromatography-flame ionization detector analytical method for the analysis of epoxy fatty acids.

In this study an improved method for analysis of epoxy fatty acids is reported. Data obtained from analysis of polar fatty acids has previously been presented, but due to the high number of compounds that co-elute in the polar fraction, the resultant chromatograms are complex which may lead to compromising the accuracy of the data. A three steps separation of fatty acid methyl esters (FAMEs) by solid-phase extraction (SPE) on a silica gel column to remove hydroxy fatty acid interferences was proposed. This approach is opposed to a two step separation procedure that has been often used to prevent analytical interferences caused by non-altered fatty acids. A gas chromatograph with a flame ionization detector (GC-FID) equipped with a polar CP-Sil 88™ column was used. Quantification was based on the use of methyl nonadecanoate (C19:0), as an internal standard. Individual mono epoxy fatty acids were well separated without co-eluting compounds. The optimized method was finally applied to screen epoxy fatty acids in 37 fresh oil samples. Results obtained for the total epoxy fatty acids were in the range 0.03-2mgg(-1) of oil with repeatability coefficient of variation (CV) ranging from 2.8 to 9.9% for duplicate analysis showing that the results obtained are repeatable.

Extraction, chemical characterization and biological activity determination of broccoli health promoting compounds.

Broccoli (Brassica oleracea L. var. Italica) contains substantial amount of health-promoting compounds such as vitamins, glucosinolates, phenolic compounds, and dietary essential minerals; thus, it benefits health beyond providing just basic nutrition, and consumption of broccoli has been increasing over the years. This review gives an overview on the extraction and separation techniques, as well as the biological activity of some of the above mentioned compounds which have been published in the period January 2008 to January 2013. The work has been distributed according to the different families of health promoting compounds discussing the extraction procedures and the analytical techniques employed for their characterization. Finally, information about the different biological activities of these compounds has been also provided.

Fatty acid profile, oxidative stability and toxicological safety of bayberry kernel oil.

The fatty acid profile, oxidative stability and toxicological safety of bayberry (Myrica rubra Sieb. et Zucc.) kernel oil (BKO) extracted by supercritical carbon dioxide (SC-CO2) and solvent of diethyl ether were assessed. Fatty acid profile was determined by gas chromatography, oxidative stability by placing the sample of 25g in a blast oven at 50±1°C to accelerate oxidation and toxicological safety by bacterial reverse mutation (Ames test) and acute oral toxicity in mice. The results demonstrated that in comparison to lard and rapeseed oil, the peroxide values of BKO were higher but the acid values were similar during the incubation test. The Ames test demonstrated no mutagenicity and no obvious acute toxicity were observed, suggesting that the BKO has potential as a novel edible oil.