Fermentation of Rubus dolichocarpus juice using Lactobacillus gasseri and Lacticaseibacillus casei and protecting phenolic compounds by Stevia extract during cold storage.

This study aimed to investigate the biological activities of Lactobacillus gasseri SM 05 (L. gasseri) and Lacticaseibacillus casei subsp. casei PTCC 1608 (L. casei) in the black raspberry (Rubus dolichocarpus) juice (BRJ) environment, and also the anti-adhesion activity against Salmonella typhimurium (S. typhimurium) in fermented black raspberry juice (FBRJ). Results showed significant anti-adhesion activity in Caco-2 epithelial cells. In the anti-adhesion process, lactic acid bacteria (LAB) improve intestinal health by preventing the adhesion of pathogens. Adding LAB to BRJ produces metabolites with bacteriocin properties. Major findings of this research include improved intestinal health, improved antidiabetic properties, inhibition of degradation of amino acids, and increase in the nutritional value of foods that have been subjected to heat processing by preventing Maillard inhibition, and inhibition of oxidation of foodstuff by increased antioxidant activity of BRJ. Both species of Lactobacillus effectively controlled the growth of S. typhimurium during BRJ fermentation. Moreover, in all tests, as well as Maillard's and α-amylase inhibition, L. gasseri was more effective than L. casei. The phenolic and flavonoid compounds increased significantly after fermentation by both LAB (p < 0.05). Adding Stevia extract to FBRJ and performing the HHP process showed convenient protection of phenolic compounds compared to heat processing.

Fabrication and characterization of curcumin-loaded composite nanoparticles based on high-hydrostatic-pressure-treated zein and pectin: Interaction mechanism, stability, and bioaccessibility.

We successfully designed curcumin (Cur)-loaded composite nanoparticles consisting of high-hydrostatic-pressure-treated (HHP-treated) zein and pectin with a pressure of 150 MPa (zein-150 MPa-P-Cur), showing nano-spherical structure with high zeta-potential (-36.72 ± 1.14 mV) and encapsulation efficiency (95.64 ± 1.23 %). We investigated the interaction mechanism of the components in zein-150 MPa-P-Cur using fluorescence spectroscopy, molecular dynamics simulation, Fourier-transform infrared spectrometry and scanning electron microscopy techniques. Compared with zein-P-Cur, the binding sites and binding energy (-53.68 kcal/mol vs. - 44.22 kcal/mol) of HHP-treated zein and Cur were increased. Meanwhile, the interaction force among HHP-treated zein, pectin, and Cur was significantly enhanced, which formed a tighter and more stable particle structure to further improve package performance. Additionally, Cur showed the best chemical stability in zein-150 MPa-P-Cur. And the bioavailability of Cur was increased to 65.53 ± 1.70 %. Collectively, composite nanoparticles based on HHP-treated zein and pectin could be used as a promising Cur delivery system.

Comparison on emulsifying and emulgelling properties of low methoxyl pectin with varied degree of methoxylation from different de-esterification methods.

Low methoxyl pectin (LMP) with different degree of methoxylation (DM, 40-50 %, 20-30 % and 5-10 %) were prepared from commercially available citrus pectin using high hydrostatic pressure assisted enzymatic (HHP-pectin) and traditional alkaline (A-pectin) de-esterification method. The results showed that both de-esterification methods and DM exhibited LMPs with varied physicochemical, structural, and functional properties. As the DM decreased, LMP showed a decrease in molecular weight (Mw), while an increase in negative charges and rhamnogalacturonan I (RG-I) ratio, accompanied with better emulsion stability, emulsion gel strength and water-holding properties. Relative to A-pectin, HHP-pectin had higher Mw and lower RG-I side chain ratio, contributing to its better thermal stability, apparent viscosity, and emulgelling properties. HHP-pectin with lower DM (5-10 %) showed superior thickening, emulsifying and emulgelling properties, while that with higher DM (40-45 %) had superior thermal stability, which provided alternative for de-esterification and targeted structural modification of pectin.

Microstructural Changes in Vanilla planifolia Beans after Using High-Hydrostatic-Pressure Treatment in the Curing Process.

During vanilla bean curing, the cell arrangement derived from the killing technique applied to start bean ripening is essential to obtain the characteristic aroma and flavor of vanilla. Hence, killing is an important step to release the enzymes and compounds required for vanillin production. In this work, high hydrostatic pressure (HHP) at 100-400 MPa for 5 min, using water at 7 °C as the pressure-transmitting medium, was applied as the killing method, and its effect on the microstructural changes in vanilla beans during different curing cycles (C0-C20) was evaluated and compared with that observed after scalding by using water at 100 °C for 8 s. Microstructural changes in the cross-sectioned beans were analyzed using a stereomicroscope (SM), confocal laser scanning microscopy (CLSM), and environmental scanning electron microscopy (ESEM). The vanilla beans were cross-sectioned and three main sectors were analyzed: the total, annular, and core. The morphometric descriptors, namely, area, Feret's diameter, and circularity, were quantified via digital image analysis (DIA), from which a shrinkage ratio was calculated. The results show that the total area in the beans presented a maximum decrease in the C16 of curing. The core area was most affected by the HHP treatment, mainly at 400 MPa, rather than scalding. CSLM observations revealed the autofluorescence of the compounds inside the beans. In conclusion, the use of microscopy techniques and DIA allowed us to determine the microstructural changes in the HHP-treated pods, which were found to be more numerous than those found in the scalded beans.

Novel strategies for controlling nitrite content in prepared dishes: Current status, potential benefits, limitations and future challenges.

Sodium nitrite is commonly used as a multifunctional curing ingredient in the processing of prepared dishes, especially meat products, to impart unique color, flavor and to prolong the shelf life of such products. However, the use of sodium nitrite in the meat industry has been controversial due to potential health risks. Finding suitable substitutes for sodium nitrite and controlling nitrite residue have been a major challenge faced by the meat processing industry. This paper summarizes possible factors affecting the variation of nitrite content in the processing of prepared dishes. New strategies for controlling nitrite residues in meat dishes, including natural pre-converted nitrite, plant extracts, irradiation, non-thermal plasma and high hydrostatic pressure (HHP), are discussed in detail. The advantages and limitations of these strategies are also summarized. Raw materials, cooking techniques, packaging methods, and storage conditions all affect the content of nitrite in the prepared dishes. The use of vegetable pre-conversion nitrite and the addition of plant extracts can help reduce nitrite residues in meat products and meet the consumer demand for clean labeled meat products. Atmospheric pressure plasma, as a non-thermal pasteurization and curing process, is a promising meat processing technology. HHP has good bactericidal effect and is suitable for hurdle technology to limit the amount of sodium nitrite added. This review is intended to provide insights for the control of nitrite in the modern production of prepared dishes.

Quality Improvement of Garlic Paste by Whey Protein Isolate Combined with High Hydrostatic Pressure Treatment.

Garlic, one of the most popular spices and medical herbs, has a unique pungent flavor and taste. Conventional homogenization and thermal treatment commonly lead to flavor and color deterioration in garlic paste, because allicin is highly susceptible to degradation and reaction. The present study was to investigate the effects of whey protein isolate (WPI) and different levels of high hydrostatic pressure (HHP, 200, 300, 400, 500, and 600 MPa) on the quality of garlic paste. Results showed that the addition of WPI in the homogenization of garlic significantly prevented green discoloration. Furthermore, WPI plus HHP under 500 MPa could better protect the color of garlic paste. Higher pressure (600 MPa) led to WPI aggregation, resulting in higher green color chroma of garlic paste. GC-MS results revealed that the application of WPI and HHP in garlic paste increased the relative level of pungent flavor compounds and decreased those of unpleasant odor compounds. The correlation analysis results revealed that WPI efficiently prevented garlic green discoloration, which is attributed to the thiol group in WPI exchanging the sulfonyl groups in allicin. In consideration of the microbial load, flavor and color quality of garlic paste, the optimal processing conditions were found at 500 MPa for 5 min with 2% WPI addition, extending shelf life to 25 days.

Effects of different antioxidants combined with high hydrostatic pressure on the color and anthocyanin retention of a blueberry juice blend during storage.

Blueberry juice has been found to undergo severe browning after treatment and cold storage, such as processing by high hydrostatic pressure (HHP) at 550 MPa/10 min/25 °C followed storage at 4 °C for 4 days. This browning may be due to the degradation of anthocyanin (AC) in the berries. Therefore, in this study, gallic acid (GA), ferulic acid (FA), ascorbic acid (VC), citric acid (CA), tea polyphenol (TP) and α-tocopherol (VE) were compared to determine their ability to improve the stability of the AC in HHP-treated blueberry juice. The juice was combined with the six abovementioned antioxidants at different concentrations, then treated by HHP at 550 MPa/10 min/25 °C and stored at 4 °C for 20 days. Thereafter, the pH levels, degrees °Brix, color parameters, total AC content and polyphenol oxidase (PPO) activity of the blueberry juice blend were measured and compared. Gallic acid at 2 g/L was found to be the most effective antioxidant to protect against AC degradation. After storage at 4 °C for 20 days, the AC content of the juice with no added antioxidants had decreased by 62.27% with a PPO relative activity of 50.78%, while the AC content of juice supplemented with 2 g/L GA had decreased by 13.42% with a PPO relative activity of 28.13%. The results of this study, thus, suggest that GA can stabilize the structure of AC in blueberry juice and reduce PPO activity, which may be beneficial in guiding the production of blueberry juice with high AC retention.

The Impact of Different Pretreatment Processes (Freezing, Ultrasound and High Pressure) on the Sensory and Functional Properties of Black Garlic (Allium sativum L.).

Black garlic (BG) is an emerging derivative of fresh garlic with enhanced nutritional properties. This study aimed to develop functional BG products with good consumer acceptance. To this end, BG was treated with freezing (F-BG), ultrasound (U-BG), and HHP (H-BG) to assess its sensory and functional properties. The results showed that F-BG and H-BG had higher S-allyl-cysteine (SAC), polyphenol, and flavonoid contents than BG. H-BG and F-BG displayed the best sensory quality after 18 days of aging, while 5-hydroxymethylfurfural (5-HMF), SAC, and polyphenols were identified as the most influential sensory parameters. Moreover, the F-BG and H-BG groups achieved optimal taste after 18 days, as opposed to untreated BG, which needed more than 24 days. Therefore, the proposed approaches significantly reduced the processing time while enhancing the physical, sensory, and functional properties of BG. In conclusion, freezing and HHP techniques may be considered promising pretreatments to develop BG products with good functional and sensory properties.

Bioaccessibility of Betalains in Beetroot (Beta vulgaris L.) Juice under Different High-Pressure Techniques.

The influence of high hydrostatic pressure (HHP) and supercritical carbon dioxide (SCCD) on the bioaccessibility of betalains in beetroot (Beta vulgaris L.) juice was investigated. Freshly squeezed juice (FJ) was treated at a mild temperature of 45 °C for 10 min (T45), pasteurization at 85 °C for 10 min (T85), HHP at 200, 400, and 500 MPa at 20 °C for 5 min (HHP200, HHP400, HHP500) and SCCD at 10, 30 and 60 MPa at 45 °C for 10 min (SCCD10, SCCD30, SCCD60). The juice was subjected to an in vitro digestion system equipped with dialysis. The content of betalains was measured with the aid of a High-Performance Liquid Chromatography (HPLC), the antioxidant capacity (AC) (ABTS•+, DPPH•) was analyzed during each digestion step, and the bioaccessibility of betacyanins and betaxanthins was assessed. The SCCD at 30 and 60 MPa significantly increased pigments' bioaccessibility compared with other samples. The 30 MPa proved particularly advantageous, as it increased the bioaccessibility of the total betacyanins and the betaxanthins by 58% and 64%, respectively, compared to the T85 samples. Additionally, higher bioaccessibility of betacyanins was noted in HHP200 and HHP400, by 35% and 32%, respectively, compared to FJ, T45, and T85 samples. AC measured by ABTS•+ and DPPH• assays were not unequivocal. However, both assays showed significantly higher AC in SCCD60 compared to T85 (21% and 31%, respectively). This research contributed to the extended use of the HHP and/or SCCD to design food with higher health-promoting potentials.

Effect of High Hydrostatic Pressure Treatment Combined with Alkaline Electrolyzed Water on the Injury and Growth Characteristics of Bacterial Spores.

The characteristics of growth and injury of Bacillus subtilis spores whose heat resistance was reduced by the treatment of high hydrostatic pressure processing (HPP) combined with/without alkaline electrolyzed water (AlEW) were investigated. The delay in the lag phase of growth curve observed when used in combination with AlEW, especially at 50 MPa or less, and was prolonged by about 4 to 6 hours. However, the effects of temperature and time during treatment on the lag phase were not significantly different between solo-HPP and in combination with AlEW. The injury characteristics of the treated bacterial spores were evaluated by using antibiotics (penicillin G, rifampicin and chloramphenicol) supplemented trypticase soy broth. In the chloramphenicol supplemented TSB, although the lag phase of bacterial spores treated by HPP with AlEW was not prolonged as compared with the normal-TSB, the decrease in growth rate during logarithmic phase and increase in maximum growth amount were observed. This result could suggest due to a damage by combined treatment of HPP with AlEW such as the inhibition of protein synthesis. Furthermore, the combined treatment with AlEW increased the catalase activity by 1.45, 1.63 and 4.25 times at 30, 80 and 100 MPa, respectively, as compared with solo-HPP, therefore the combined treatment could cause high oxidative stress on bacterial spores.

Effect of Extraction Methods and In Vitro Bio-Accessibility of Microencapsulated Lemon Extract.

The extraction of bioactive compounds from fruits, such as lemon, has gained relevance because these compounds have beneficial properties for health, such as antioxidant and anticancer properties; however, the extraction method can significantly affect these properties. High hydrostatic pressure and ultrasound, as emerging extraction methods, constitute an alternative to conventional extraction, improving extractability and obtaining extracts rich in bioactive compounds. Therefore, lemon extracts (LEs) were obtained by conventional (orbital shaking), ultrasound-assisted, and high-hydrostatic-pressure extraction. Extracts were then microencapsulated with maltodextrin at 10% (M10), 20% (M20), and 30% (M30). The impact of microencapsulation on LEs physicochemical properties, phenolics (TPC), flavonoids (TFC) and relative bio-accessibility (RB) was evaluated. M30 promoted a higher microencapsulation efficiency for TPC and TFC, and a longer time required for microcapsules to dissolve in water, as moisture content, water activity and hygroscopicity decreased. The RBs of TPC and TFC were higher in microcapsules with M30, and lower when conventional extraction was used. The data suggest that microencapsulated LE is promising as it protects the bioactivity of phenolic compounds. In addition, this freeze-dried product can be utilized as a functional ingredient for food or supplement formulations.

Extraction of Pectin from Satsuma Mandarin Peel: A Comparison of High Hydrostatic Pressure and Conventional Extractions in Different Acids.

Satsuma mandarin peel pectin was extracted by high hydrostatic pressure-assisted citric acid (HHPCP) or hydrochloric acid (HHPHP), and the physiochemical, structural, rheological and emulsifying characteristics were compared to those from conventional citric acid (CCP) and hydrochloric acid (CHP). Results showed that HHP and citric acid could both increase the pectin yield, and HHPCP had the highest yield (18.99%). Structural characterization, including NMR and FTIR, demonstrated that HHPHP showed higher Mw than the other pectins. The viscosity of the pectin treated with HHP was higher than that obtained with the conventional method, with HHPHP exhibiting significantly higher viscosity. Interestingly, all the pectin emulsions showed small particle mean diameters (D4,3 being 0.2-1.3 µm) and extremely good emulsifying stability with centrifugation and 30-day storage assays, all being 100%. Satsuma mandarin peel could become a highly promising pectin source with good emulsifying properties, and HHP-assisted acid could be a more efficient method for pectin extraction.

Curcumin loading and colon release of pectin gel beads: Effect of different de-esterification method.

Low methoxyl citrus pectin (LMP) de-esterified from high hydrostatic pressure assisted enzymatic (HHP-pectin) and two other traditional methods was characterized, and curcumin-pectin calcium gel beads were prepared to study curcumin-loading and colon-targeted delivery abilities. It was found there was no significant difference among different LMP on amorphous structure, while significantly higher Rha/GalA ratio of HHP-pectin indicated higher rhamnogalacturonan Ⅰ (RG-I) proportion and branching extent. Curcumin was well embedded in LMP beads with improved stability. HHP-pectin beads showed significantly higher hardness, chewiness and encapsulation efficiency, while lower swelling ratio. Moreover, in vitro simulated digestion showed gel beads can deliver curcumin to colon and inhibit premature release. HHP-pectin beads could release curcumin more quickly in colon, probably because of differences on texture properties, which may be depended on molecular structure. Thus, LMP especially HHP-pectin calcium gel as colon-targeted delivery system for curcumin may have potential application in function food and drug delivery.

Effect of high hydrostatic pressure treatment on the formation and in vitro digestion of Tartary buckwheat starch/flavonoid complexes.

Tartary buckwheat is rich in flavonoids and starch, and the interaction between these two components affects the structural and digestive properties of the food product. In this study, we analyze the effects of thermal gelatinization (GT), ultrasonic treatment (UT), and high hydrostatic pressure treatment (HHP) on the compounding degree of starch and flavonoids in Tartary buckwheat and on the properties of the starch/flavonoid complex system (HBS-BF). Based on scanning electron microscope (SEM) and X-ray diffraction (XRD) analyses, the surface of HBS-BF becomes rough after GT or UT, and many small cavities appear. Comparatively, HHP treatment is less damaging to HBS-BF. Moreover, HHP maintains the original A-type crystal morphology of buckwheat starch in HBS-BF, whereas GT and UT change to V-type. Repeated HHP further improves the crystallinity and digestion resistance of HBS-BF. According to the recorded Fourier transform infrared (FT-IR) spectra, HBS-BF by different methods does not exhibit new covalent bonds. Practical application: The results reported herein promote the application of Tartary buckwheat starch and flavonoids in the food industry by providing a theoretical basis for the development of starch anti-digestion mechanisms and the preparation of resistant starch.

Comparative study of thermo-mechanical, rheological, and structural properties of gluten-free model doughs from high hydrostatic pressure treated maize, potato, and sweet potato starches.

Effects of high hydrostatic pressure (HHP, 100, 300 and 500 MPa for 30 min at 25 °C) treated maize (MS), potato (PS), and sweet potato (SS) starches on thermo-mechanical, rheological, microstructural properties and water distribution of gluten-free model doughs were investigated. Significant differences were found among starch model doughs in terms of water absorption, dough development time, and dough stability at 500 MPa. Total gas production of MS, PS and SS doughs was significantly increased from 541 to 605 mL (300 MPa), 527 to 568 mL (500 MPa) and 551 to 620 mL (500 MPa) respectively as HHP increased. HHP increased storage (G') and loss (G″) modulus in terms of rheological properties suggesting, the higher viscoelastic behavior of starch model doughs. The dough after 500 MPa treatment showed lower degree of dependence of G' on frequency sweep suggesting, the formation of a stable network structure. In addition, continuous abundant water distribution and uniform microstructure were found in MS (300 MPa), PS (500 MPa) and SS (500 MPa) doughs for 60 min fermentation. Thus, the starches after HHP show great application potential in gluten-free doughs with improved characteristics.

High hydrostatic pressure treatment reduces the potential antigenicity of ß-conglycinin by changing the protein structure during in vitro digestion.

BACKGROUND: High hydrostatic pressure (HHP) treatment has been used to alleviate the allergenicity of soybeans, but there are little data about the potential antigenicity of ß-conglycinin after HHP treatment. RESULTS: We examined the effects of HHP treatment on the antigenicity and structure of ß-conglycinin. When the pressure was 300 and 400 MPa, HHP treatment reduced the immunoglobulin (Ig)G binding capacity of ß-conglycinin, while its IgE binding capacity did not change significantly. After in vitro digestion, both the IgE and IgG binding of ß-conglycinin was obviously inhibited after HHP treatment at 400 MPa and 60 °C, although its binding capacity with linear epitope antibodies increased. Moreover, HHP treatment changed the secondary structure of ß-conglycinin, the content of α-helix and random coils increased, while the ß-sheet and ß-turn decreased. After HHP treatment, the conformational structure was unfolded so that a large number of hydrophobic regions were exposed. CONCLUSION: HHP treatment alleviated the potential antigenicity of ß-conglycinin by modifying its structure, which facilitated in vitro digestion and destroyed epitopes. This research provides a new insight into the mechanism of HHP treatment that affects the sensitization of soy protein allergens. © 2022 Society of Chemical Industry.

The inhibition of pectin oligosaccharides on degranulation of RBL-2H3 cells from apple pectin with high hydrostatic pressure assisted enzyme treatment.

The conditions for the preparation of pectic oligosaccharides (POS) by high hydrostatic pressure-assisted enzymatic (E-HHP) method were explored. The optimal conditions consisted of the pressure of 350 MPa for 20 min, and enzymolysis for 60 min with 0.011 U/mL enzyme. The products were isolated by ion exchange chromatography, galacturonic acid, di- and tri-galacturonides (Tri-GalA) with high purity were obtained. Additionally, the effects of POS on activation and degranulation of RBL-2H3 mast cells were investigated. It was found that Tri-GalA and POS could attenuate the release of ß-hexosaminidase and histamine, reduce the production of IL-4 and inhibit the extracellular Ca2+ influx of RBL-2H3 cells. Notably, 150 µg/mL POS significantly alleviated the IgE-mediated allergic reaction of RBL-2H3 cells. These results indicate that POS could be used as an inhibitor in regulating mast cell-mediated allergic inflammatory responses.

Uncovering the Bioactivity of Aurantiochytrium sp.: a Comparison of Extraction Methodologies.

Aurantiochytrium sp. is an emerging alternative source of polyunsaturated fatty acids (PUFAs), docosahexaenoic acid (DHA), and squalene, playing an important role in the phasing out of traditional fish sources for these compounds. Novel lipid extraction techniques with a focus on sustainability and low environmental footprint are being developed for this organism, but the exploration of other added-value compounds within it is still very limited. In this work, a combination of novel green extraction techniques (high hydrostatic pressure extraction (HPE) and supercritical fluid extraction (SFE)) and traditional techniques (organic solvent Soxhlet extraction and hydrodistillation (HD)) was used to obtain lipophilic extracts of Aurantiochytrium sp., which were then screened for antioxidant (DPPH radical reduction capacity and ferric-reducing antioxidant potential (FRAP) assays), lipid oxidation protection, antimicrobial, anti-aging enzyme inhibition (collagenase, elastase and hyaluronidase), and anti-inflammatory (inhibition of NO production) activities. The screening revealed promising extracts in nearly all categories of biological activity tested, with only the enzymatic inhibition being low in all extracts. Powerful lipid oxidation protection and anti-inflammatory activity were observed in most SFE samples. Ethanolic HPEs inhibited both lipid oxidation reactions and microbial growth. The HD extract demonstrated high antioxidant, antimicrobial, and anti-inflammatory activities making, it a major contender for further studies aiming at the valorization of Aurantiochytrium sp. Taken together, this study presents compelling evidence of the bioactive potential of Aurantiochytrium sp. and encourages further exploration of its composition and application.

Effect of High Hydrostatic Pressure Treatment on Urease Activity and Inhibition of Fishy Smell in Mackerel (Scomber japonicus) during Storage.

In this study, the physicochemical changes related to fishy smell were determined by storing high hydrostatic pressure (HHP)-treated mackerel (Scomber japonicus) meat in a refrigerator for 20 days. The inhibition of crude urease activity from Vibrio parahaemolyticus using HHP treatment was also investigated. The mackerel meat storage experiment demonstrated that production of trimethylamine (TMA) and volatile basic nitrogen (VBN), the main components of fishy smell, was significantly reduced on the 20th day of storage after the HHP treatment compared to the untreated mackerels. The results demonstrated that the increased ammonia nitrogen rates in the 2000, 3000, and 4000 bar, HHP-treated groups decreased by 23.8%, 23.8%, and 31.0%, respectively, compared to the untreated groups. The enzyme activity of crude urease was significantly reduced in the HHP-treated group compared to that in the untreated group. Measurement of the volatile organic compounds (VOCs) in mackerel meat during storage indicated that the content of ethanol, 2-butanone, 3-methylbutanal, and trans-2-pentenal, which are known to cause off-flavor due to spoilage, were significantly reduced by HHP treatment. Collectively, our results suggested that HHP treatment would be useful for inhibiting the activity of urease, thereby reducing the fishy smells from fish and shellfish.

High Hydrostatic Pressure Treatment of Oysters (Crassostrea gigas)-Impact on Physicochemical Properties, Texture Parameters, and Volatile Flavor Compounds.

High hydrostatic pressure (HHP) treatment is a non-thermal processing technology, which is widely used in the food processing field at present. In this study, the effects of HHP treatment (100~500 MPa for 5 min) on the physicochemical properties, texture parameters, and volatile flavor compounds of oysters were investigated. The results showed that HHP treatment increased the water content while reducing the crude protein and ash content of the oyster. Texture parameters showed that HHP treatment improved the hardness, springiness, chewiness, and cohesiveness of oysters, compared with the control group. In addition, the saturated fatty acid (SFA) content was slightly increased after HHP treatment, while the difference in monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) content was not significant. Furthermore, HHP increased hexenoic aldehyde, 2,4-heptadienal, 1-octene-3-ol, and 2-octen-1-ol and decreased the contents of 3. 6-nadien-1-ol, 3-octanone, and 2-undecanone, suggesting that HHP might inhibit the fishiness of oyster and showed a positive effect on its flavor. Based on the above results, HHP improved the edible qualities such as texture properties and volatile flavor of oysters. This meets the requirements of consumers on the edible quality of seafood and provides new ideas for the development of seafood.