Evaluation of dietary lignin on broiler performance, nutrient digestibility, cholesterol and triglycerides concentrations, gut morphometry, and lipid oxidation.

Two trials were performed in order to evaluate the effects of dietary Kraft lignin inclusion on broiler performance, ileal nutrient digestibility, blood lipid profile, intestinal morphometry, and lipid oxidation of meat. Trial 1 was conducted in order to evaluate performance and ileal digestibility for the period of 1 to 21 d of age, randomly distributing 490 day-old broiler chicks across 5 dietary treatments with 14 replicates containing 7 birds each in metabolic cages, while trial 2 was executed in order to evaluate performance, blood parameters, intestinal morphometry, carcass yield and abdominal fat, and lipid oxidation for the period of 1 to 42 d of age, randomly distributing 900 day-old broiler chicks across 5 dietary treatments with 15 replicates of 12 birds each in floor pens, being each bird in trial 2 challenged with coccidiosis vaccine at 10 d of age. The treatments used in both trials were: positive control (PC): basal diet + antimicrobial; negative control (NC): Basal diet; NC1: NC + 1% lignin; NC2: NC + 2% lignin; NC3: NC + 3% lignin. For trial 1, it was observed that birds fed diets containing 1% lignin had a significant positive effect for BW, feed intake (FI), average daily weight gain (BWG) and feed conversion rate (FCR), similar to the PC, but also showing better EE, CP and AAs ileal digestibility percentages when compared to other treatments. For trial 2, it was observed that during the period of 21 to 35 d, the inclusion of lignin in the diet provided better results in animal performance, similar to the PC group, but at 42 d, animals fed with dietary lignin showed results lower than animals fed the PC diet (P < 0.05). Animals fed with increasing lignin concentrations showed decreasing levels of HDL (P < 0.05). As of intestinal morphometry, animals fed with 1% and 3% lignin showed longer intestinal length (P < 0.05). At 14 d of age, it was observed that animals fed with lignin showed oxidation levels similar to the control treatments. The inclusion of up to 1% lignin in the diet provides beneficial effects on productive performance and nutrient digestibility, while the inclusion of 2% lignin provided lower cholesterol levels, lower villus/crypt ratio, and better internal organ development, therefore, it can be considered an alternative to performance-enhancing antimicrobials in broiler chicken diets.

Polysaccharide utilization loci from Bacteroidota encode CE15 enzymes with possible roles in cleaving pectin-lignin bonds.

Lignocellulose is a renewable but complex material exhibiting high recalcitrance to enzymatic hydrolysis, which is attributed, in part, to the presence of covalent linkages between lignin and polysaccharides in the plant cell wall. Glucuronoyl esterases from carbohydrate esterase family 15 (CE15) have been proposed as an aid in reducing this recalcitrance by cleaving ester bonds found between lignin and glucuronoxylan. In the Bacteroidota phylum, some species organize genes related to carbohydrate metabolism in polysaccharide utilization loci (PULs) which encode all necessary proteins to bind, deconstruct, and respond to a target glycan. Bioinformatic analyses identified CE15 members in some PULs that appear to not target the expected glucuronoxylan. Here, five CE15 members from such PULs were investigated with the aim of gaining insights on their biological roles. The selected targets were characterized using glucuronoyl esterase model substrates and with a new synthetic molecule mimicking a putative ester linkage between pectin and lignin. The CE15 enzyme from Phocaeicola vulgatus was structurally determined by X-ray crystallography both with and without carbohydrate ligands with galacturonate binding in a distinct conformation than that of glucuronate. We further explored whether these CE15 enzymes could act akin to pectin methylesterases on pectin-rich biomass but did not find evidence to support the proposed activity. Based on the evidence gathered, the CE15 enzymes in the PULs expected to degrade pectin could be involved in cleavage of uronic acid esters in rhamnogalacturonans.IMPORTANCEThe plant cell wall is a highly complex matrix, and while most of its polymers interact non-covalently, there are also covalent bonds between lignin and carbohydrates. Bonds between xylan and lignin are known, such as the glucuronoyl ester bonds that are cleavable by CE15 enzymes. Our work here indicates that enzymes from CE15 may also have other activities, as we have discovered enzymes in PULs proposed to target other polysaccharides, including pectin. Our study represents the first investigation of such enzymes. Our first hypothesis that the enzymes would act as pectin methylesterases was shown to be false, and we instead propose that they may cleave other esters on complex pectins such as rhamnogalacturonan II. The work presents both the characterization of five novel enzymes and can also provide indirect information about the components of the cell wall itself, which is a highly challenging material to chemically analyze in fine detail.

Nitrogen sources alter ligninase and cellulase activities of thermophilic fungi isolated from compost and vermicompost.

Fungi harboring lignocellulolytic activity accelerate the composting process of agricultural wastes; however, using thermophilic fungal isolates for this process has been paid little attention. Moreover, exogenous nitrogen sources may differently affect fungal lignocellulolytic activity. A total of 250 thermophilic fungi were isolated from local compost and vermicompost samples. First, the isolates were qualitative assayed for ligninase and cellulase activities using Congo red (CR) and carboxymethyl cellulose (CMC) as substrates, respectively. Then, twenty superior isolates harboring higher ligninase and cellulase activities were selected and quantitatively assayed for both enzymes in basic mineral (BM) liquid medium supplemented with the relevant substrates and nitrogen sources including (NH4)2SO4 (AS), NH4NO3 (AN), urea (U), AS + U (1:1), or AN + U (1:1) with final nitrogen concentration of 0.3 g/L. The highest ligninase activities of 99.94, 89.82, 95.42, 96.25, and 98.34% of CR decolorization were recorded in isolates VC85, VC94, VC85, C145, and VC85 in the presence of AS, U, AS + U, AN, and AN + U, respectively. Mean ligninase activity of 63.75% in superior isolates was achieved in the presence of AS and ranked the highest among other N compounds. The isolates C200 and C184 exhibited the highest cellulolytic activity in the presence of AS and AN + U by 8.8 and 6.5 U/ml, respectively. Mean cellulase activity of 3.90 U/mL was achieved in AN + U and ranked the highest among other N compounds. Molecular identification of twenty superior isolates confirmed that all of them are belonging to Aspergillus fumigatus group. Focusing on the highest ligninase activity of the isolate VC85 in the presence of AS, the combination can be recommended as a potential bio-accelerator for compost production.

Challenges and prospects of yeast-based microbial oil production within a biorefinery concept.

Biodiesel, unlike to its fossil-based homologue (diesel), is renewable. Its use contributes to greater sustainability in the energy sector, mainly by reducing greenhouse gas emissions. Current biodiesel production relies on plant- and animal-related feedstocks, resulting in high final costs to the prices of those raw materials. In addition, the production of those materials competes for arable land and has provoked a heated debate involving their use food vs. fuel. As an alternative, single-cell oils (SCOs) obtained from oleaginous microorganisms are attractive sources as a biofuel precursor due to their high lipid content, and composition similar to vegetable oils and animal fats. To make SCOs competitive from an economic point of view, the use of readily available low-cost substrates becomes essential. This work reviews the most recent advances in microbial oil production from non-synthetic sugar-rich media, particularly sugars from lignocellulosic wastes, highlighting the main challenges and prospects for deploying this technology fully in the framework of a Biorefinery concept.

[Expression of ß-xylosidase An-xyl from Aspergillus niger and characterization of its xylose tolerance].

The hydrolysis of xylo-oligosaccharides catalyzed by ß-xylosidase plays an important role in the degradation of lignocellulose. However, the enzyme is easily inhibited by its catalytic product xylose, which severely limits its application. Based on molecular docking, this paper studied the xylose affinity of Aspergillus niger ß-xylosidase An-xyl, which was significantly differentially expressed in the fermentation medium of tea stalks, through cloning, expression and characterization. The synergistic degradation effect of this enzyme and cellulase on lignocellulose in tea stems was investigated. Molecular docking showed that the affinity of An-xyl to xylose was lower than that of Aspergillus oryzae ß-xylosidase with poor xylose tolerance. The Ki value of xylose inhibition constant of recombinant-expressed An-xyl was 433.2 mmol/L, higher than that of most ß-xylosidases of the GH3 family. The Km and Vmax towards pNPX were 3.6 mmol/L and 10 000 µmol/(min·mL), respectively. The optimum temperature of An-xyl was 65 ℃, the optimum pH was 4.0, 61% of the An-xyl activity could be retained upon treatment at 65 ℃ for 300 min, and 80% of the An-xyl activity could be retained upon treatment at pH 2.0-8.0 for 24 h. The hydrolysis of tea stem by An-xyl and cellulase produced 19.3% and 38.6% higher reducing sugar content at 2 h and 4 h, respectively, than that of using cellulase alone. This study showed that the An-xyl mined from differential expression exhibited high xylose tolerance and higher catalytic activity and stability, and could hydrolyze tea stem lignocellulose synergistically, which enriched the resource of ß-xylosidase with high xylose tolerance, thus may facilitate the advanced experimental research and its application.

Unleashing synergistic potential of microbially enhanced anaerobic co-digestion of petroleum refinery biosludge and yard waste: Impact of nutrient balance and microbial diversity.

Petroleum refinery sludge, an egregious solid residue generated from the wastewater treatment plants poses an environmental hazard owing to its intricate hydrocarbon composition, necessitating competent treatment for secure disposal. The study proposes a green solution through anaerobic co-digestion of nitrogen-rich petroleum refinery sludge (PS) with carbon-rich yard waste (YW), balancing the nutrients and moisture content for efficient microbial proliferation. Using Central Composite Design-Response Surface Methodology, 1 L batch experiments were conducted with varying carbon/nitrogen (C/N) ratios and pH to achieve maximum biogas yield within 50 days of co-digestion. However, the sluggish biogas recovery (40%) indicated a slow rate-limiting hydrolysis, necessitating pretreatment. Feedstock incubation with Bacillus subtilis IH1 strain, isolated from the microbially-enriched PS, at 108 colony forming units (CFU) per mL for 5 days maximized the soluble chemical oxygen demand and volatile fatty acids by 2.2 and 1.4 folds respectively compared to untreated feedstock. Scale-up Bacillus subtilis aided co-digestion studies further augmented biogas by 76% against untreated monodigestion of PS with significant total petroleum hydrocarbons, emulsions, and lignocellulosic degradation. Further identification of major organic pollutants in the batch digestate revealed significant degradation of the toxic organic hydrocarbon pollutants apotheosizing the efficacy of the synergistic sustainable technique for the management of PS. ENVIRONMENTAL IMPLICATION: The effluent treatment plants (ETPs) of petroleum refining industries generate sludge which is a complex mixture of petroleum hydrocarbons, oil-water (O/W) emulsions and heavy metals. These petroleum hydrocarbon constituents can be linear/cyclic alkanes, polyaromatics, resins and asphaltenes, whose intricate composition is reportedly carcinogenic, cytogenic and mutagenic, classifying it as hazardous waste. Biological treatment of these sludge through anaerobic digestion leads to utilization of petroleum hydrocarbons with subsequent energy recovery. Co-digestion of these sludge with competent co-substrates leads to nutrient balance, diverse microbial proliferation and toxicant dilution. Microbially aided co-digestion further augments methane rendering a digestate with utmost pollutant degradation.

From straw to salmon: a technical design and energy balance for production of yeast oil for fish feed from wheat straw.

BACKGROUND: Aquaculture is a major user of plant-derived feed ingredients, such as vegetable oil. Production of vegetable oil and protein is generally more energy-intensive than production of the marine ingredients they replace, so increasing inclusion of vegetable ingredients increases the energy demand of the feed. Microbial oils, such as yeast oil made by fermentation of lignocellulosic hydrolysate, have been proposed as a complement to plant oils, but energy assessments of microbial oil production are needed. This study presents a mass and energy balance for a biorefinery producing yeast oil through conversion of wheat straw hydrolysate, with co-production of biomethane and power. RESULTS: The results showed that 1 tonne of yeast oil (37 GJ) would require 9.2 tonnes of straw, 14.7 GJ in fossil primary energy demand, 14.6 GJ of process electricity and 13.3 GJ of process heat, while 21.5 GJ of biomethane (430 kg) and 6 GJ of excess power would be generated simultaneously. By applying economic allocation, the fossil primary energy demand was estimated to 11.9 GJ per tonne oil. CONCLUSIONS: Fossil primary energy demand for yeast oil in the four scenarios studied was estimated to be 10-38% lower than for the commonly used rapeseed oil and process energy demand could be met by parallel combustion of lignin residues. Therefore, feed oil can be produced from existing non-food biomass without causing agricultural expansion.

Meyerozyma caribbica Isolated from Vinasse-Irrigated Sugarcane Plantation Soil: A Promising Yeast for Ethanol and Xylitol Production in Biorefineries.

The production of fuels and other industrial products from renewable sources has intensified the search for new substrates or for the expansion of the use of substrates already in use, as well as the search for microorganisms with different metabolic capacities. In the present work, we isolated and tested a yeast from the soil of sugarcane irrigated with vinasse, that is, with high mineral content and acidic pH. The strain of Meyerozyma caribbica URM 8365 was able to ferment glucose, but the use of xylose occurred when some oxygenation was provided. However, some fermentation of xylose to ethanol in oxygen limitation also occurs if glucose was present. This strain was able to produce ethanol from molasses substrate with 76% efficiency, showing its tolerance to possible inhibitors. High ethanol production efficiencies were also observed in acidic hydrolysates of each bagasse, sorghum, and cactus pear biomass. Mixtures of these substrates were tested and the best composition was found for the use of excess plant biomass in supplementation of primary substrates. It was also possible to verify the production of xylitol from xylose when the acetic acid concentration is reduced. Finally, the proposed metabolic model allowed calculating how much of the xylose carbon can be directed to the production of ethanol and/or xylitol in the presence of glucose. With this, it is possible to design an industrial plant that combines the production of ethanol and/or xylitol using combinations of primary substrates with hydrolysates of their biomass.

Integration of metabolism and regulation reveals rapid adaptability to growth on non-native substrates.

Engineering synthetic heterotrophy is a key to the efficient bio-based valorization of renewable and waste substrates. Among these, engineering hemicellulosic pentose utilization has been well-explored in Saccharomyces cerevisiae (yeast) over several decades-yet the answer to what makes their utilization inherently recalcitrant remains elusive. Through implementation of a semi-synthetic regulon, we find that harmonizing cellular and engineering objectives are a key to obtaining highest growth rates and yields with minimal metabolic engineering effort. Concurrently, results indicate that "extrinsic" factors-specifically, upstream genes that direct flux of pentoses into central carbon metabolism-are rate-limiting. We also reveal that yeast metabolism is innately highly adaptable to rapid growth on non-native substrates and that systems metabolic engineering (i.e., functional genomics, network modeling, etc.) is largely unnecessary. Overall, this work provides an alternate, novel, holistic (and yet minimalistic) approach based on integrating non-native metabolic genes with a native regulon system.

Influence of high- and low-fermentable dietary fibres in sows' diet on the colostrum potential against Clostridioides difficile toxin-induced effects in IPEC-J2 cells.

Sow colostrum has been reported to protect the IPEC-J2 cells and piglet colon tissues from detrimental effect of Clostridioides difficile toxins. Since dietary fibre can influence the colostrum composition in sows, we hypothesised that it can also differentially affect the colostrum potential against C. difficile toxin-induced effects in IPEC-J2. IPEC-J2 were incubated with colostrum from sows fed either high-fermentable sugar beet pulp (SBP) or low-fermentable lignocellulose (LNC) fibres and in combination with the toxins and analysed by trans-epithelial electrical resistance (TEER) and cell viability using propidium iodide in flow cytometry. Toxins drastically decreased the integrity of IPEC-J2. Colostrum from the sows fed either SBP or LNC exerted protective effect against toxins on IPEC-J2 integrity and this effect was numerically superior in the SBP group. Differences in the percentages of TEER between different treatments were noted after 2 h (p = 0.043), 3 h (p = 0.017) and 4 h (p = 0.017) of incubation and a tendency for differences was noted after 5 h of incubation (p = 0.071). Colostrum from either SBP- or LNC-fed sows did not protect the IPEC-J2 from toxin-induced death. Colostrum of the sows fed either high-fermentable or low-fermentable fibres has a potential to protect IPEC-J2 from the loss of integrity, which may be important in protection from C. difficile-infection development in neonatal piglets.

Penicillium chrysogenum as a fungal factory for feruloyl esterases.

Plant biomass is a promising substrate for biorefinery, as well as a source of bioactive compounds, platform chemicals, and precursors with multiple industrial applications. These applications depend on the hydrolysis of its recalcitrant structure. However, the effective biological degradation of plant cell walls requires several enzymatic groups acting synergistically, and novel enzymes are needed in order to achieve profitable industrial hydrolysis processes. In the present work, a feruloyl esterase (FAE) activity screening of Penicillium spp. strains revealed a promising candidate (Penicillium rubens Wisconsin 54-1255; previously Penicillium chrysogenum), where two FAE-ORFs were identified and subsequently overexpressed. Enzyme extracts were analyzed, confirming the presence of FAE activity in the respective gene products (PrFaeA and PrFaeB). PrFaeB-enriched enzyme extracts were used to determine the FAE activity optima (pH 5.0 and 50-55 °C) and perform proteome analysis by means of MALDI-TOF/TOF mass spectrometry. The studies were completed with the determination of other lignocellulolytic activities, an untargeted metabolite analysis, and upscaled FAE production in stirred tank reactors. The findings described in this work present P. rubens as a promising lignocellulolytic enzyme producer. KEY POINTS: • Two Penicillium rubens ORFs were first confirmed to have feruloyl esterase activity. • Overexpression of the ORFs produced a novel P. rubens strain with improved activity. • The first in-depth proteomic study of a P. rubens lignocellulolytic extract is shown.

Transcriptome Analysis of Podoscypha petalodes Strain GGF6 Reveals the Diversity of Proteins Involved in Lignocellulose Degradation and Ligninolytic Function.

The present study reports transcriptomic profiling of a Basidiomycota fungus, Podoscypha petalodes strain GGF6 belonging to the family Podoscyphaceae, isolated from the North-Western Himalayan ranges in Himachal Pradesh, India. Podoscypha petalodes strain GGF6 possesses significant biotechnological potential as it has been reported for endocellulase, laccase, and other lignocellulolytic enzymes under submerged fermentation conditions. The present study attempts to enhance our knowledge of its lignocellulolytic potential as no previous omics-based analysis is available for this white-rot fungus. The transcriptomic analysis of P. petalodes GGF6 reveals the presence of 280 CAZy proteins. Furthermore, bioprospecting transcriptome signatures in the fungi revealed a diverse array of proteins associated with cellulose, hemicellulose, pectin, and lignin degradation. Interestingly, two copper-dependent lytic polysaccharide monooxygenases (AA14) and one pyrroloquinolinequinone-dependent oxidoreductase (AA12) were also identified, which are known to help in the lignocellulosic plant biomass degradation. Overall, this transcriptome profiling-based study provides deeper molecular-level insights into this Basidiomycota fungi, P. petalodes, for its potential application in diverse biotechnological applications, not only in the biofuel industry but also in the environmental biodegradation of recalcitrant molecules. Supplementary Information: The online version contains supplementary material available at 10.1007/s12088-022-01037-6.

Direct Furfural Production from Deciduous Wood Pentosans Using Different Phosphorus-Containing Catalysts in the Context of Biorefining.

This study seeks to improve the effectiveness of the pretreatment stage when direct furfural production is integrated into the concept of a lignocellulosic biomass biorefinery. First of all, the catalytic effects of different phosphorus-containing salts (AlPO4, Ca3(PO4)2, FePO4, H3PO4, NaH2PO4) were analysed in hydrolysis for their ability to convert birch wood C-5 carbohydrates into furfural. The hydrolysis process was performed with three different amounts of catalyst (2, 3 and 4 wt.%) at a constant temperature (175 °C) and treatment time (90 min). It was found that the highest amount of furfural (63-72%, calculated based on the theoretically possible yield (% t.p.y.)) was obtained when H3PO4 was used as a catalyst. The best furfural yield among the used phosphorus-containing salts was obtained with NaH2PO4: 40 ± 2%. The greatest impact on cellulose degradation during the hydrolysis process was observed using H3PO4 at 12-20% of the initial amount, while the lowest degradation was observed using NaH2PO4 as a catalyst. The yield of furfural was 60.5-62.7% t.p.y. when H3PO4 and NaH2PO4 were combined (1:2, 1:1, or 2:1 at a catalyst amount of 3 wt.%); however, the amount of cellulose that was degraded did not exceed 5.2-0.3% of the starting amount. Enzymatic hydrolysis showed that such pretreated biomass could be directly used as a substrate to produce glucose. The highest conversion ratio of cellulose into glucose (83.1%) was obtained at an enzyme load of 1000 and treatment time of 48 h.

Upstream processes of citrus fruit waste biorefinery for complete valorization.

Citrus fruit waste (CW) is a useful biomass and its valorization into fuels and biochemicals has received much attention. For economic feasibility, increased efficiency of the preceding extraction and enzyme saccharification processes is necessary. However, at present, there is a lack of systematic reviews addressing these two integral upstream processes in concert for CW biorefinery. Here, the state-of-the-art advancements in enzyme extraction and saccharification processes-using which relevant essential oils, flavonoids, and sugars can be obtained-are reviewed. Specifically, the extraction options for two commercially available CW-derived products, essential oils and pectin, are discussed. With respect to enzyme saccharification, the use of an undefined commercial mixture routinely results in suboptimal sugar production. In this respect, applicable strategies for enzyme mixture customization are suggested for maximizing the hydrolytic efficiency of CW. The enzyme degradation system for CW-derived carbohydrates and its extensive application for sugar production are also discussed.

Screening of xylose utilizing and high lipid producing yeast strains as a potential candidate for industrial application.

BACKGROUND: Sustainable production of oil for food, feed, fuels and other lipid-based chemicals is essential to meet the demand of the increasing human population. Consequently, novel and sustainable resources such as lignocellulosic hydrolysates and processes involving these must be explored. In this paper we screened for naturally-occurring xylose utilizing oleaginous yeasts as cell factories for lipid production, since pentose sugar catabolism plays a major role in efficient utilization of lignocellulosic feedstocks. Glycerol utilization, which is also beneficial in yeast-based oil production as glycerol is a common by-product of biodiesel production, was investigated as well. Natural yeast isolates were studied for lipid accumulation on a variety of substrates, and the highest lipid accumulating strains were further investigated in shake flask cultivations and fermenter studies on xylose and hydrolysate. RESULTS: By collecting leaves from exotic plants in greenhouses and selective cultivation on xylose, a high frequency of oleaginous yeasts was obtained (> 40%). Different cultivation conditions lead to differences in fatty acid contents and compositions, resulting in a set of strains that can be used to select candidate production strains for different purposes. In this study, the most prominent strains were identified as Pseudozyma hubeiensis BOT-O and Rhodosporidium toruloides BOT-A2. The fatty acid levels per cell dry weight after cultivation in a nitrogen limited medium with either glucose, xylose or glycerol as carbon source, respectively, were 46.8, 43.2 and 38.9% for P. hubeiensis BOT-O, and 40.4, 27.3 and 42.1% for BOT-A2. Furthermore, BOT-A2 accumulated 45.1% fatty acids per cell dry weight in a natural plant hydrolysate, and P. hubeiensis BOT-O showed simultaneous glucose and xylose consumption with similar growth rates on both carbon sources. The fatty acid analysis demonstrated both long chain and poly-unsaturated fatty acids, depending on strain and medium. CONCLUSIONS: We found various natural yeast isolates with high lipid production capabilities and the ability to grow not only on glucose, but also xylose, glycerol and natural plant hydrolysate. R. toruloides BOT-A2 and P. hubeiensis BOT-O specifically showed great potential as production strains with high levels of storage lipids and comparable growth to that on glucose on various other substrates, especially compared to currently used lipid production strains. In BOT-O, glucose repression was not detected, making it particularly desirable for utilization of plant waste hydrolysates. Furthermore, the isolated strains were shown to produce oils with fatty acid profiles similar to that of various plant oils, making them interesting for future applications in fuel, food or feed production.

[Comparison of major chemical components in Puerariae Thomsonii Radix and Puerariae Lobatae Radix].

For further development and utilization of the germplasm resources of Puerariae Thomsonii Radix and Puerariae Lobatae Radix, this study developed the ultra performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS) method, high performance liquid chromatography(HPLC) method, and anthrone colorimetry to detect the content of 23 flavonoids, cellulose, hemicellulose, lignin, soluble sugar, and starch in Puerariae Thomsonii Radix and Puerariae Lobatae Radix. The content differences of various chemical components were analyzed. The methodological test of the established UPLC-MS/MS method for the determination of flavonoids showed that each component had satisfactory linearity within the corresponding linear range(R~2≥0.995), and the average spiked recoveries were 94.48%-105.5%. With this method, 17 flavonoids in Puerariae Lobatae Radix and Puerariae Thomsonii Radix were detected. Based on HPLC and anthrone colorimetry, the determination methods of lignocellulose, soluble sugar, and starch were established. According to the determination results, the content of cellulose in Puerariae Thomsonii Radix was significantly lower than that in Puerariae Lobatae Radix, and the content of starch was significantly higher than that in Puerariae Lobatae Radix. The content of hemicellulose, lignin, and soluble sugar showed no significant difference between the two medicinals, and the content of soluble sugar was in highly significantly negative correlation with that of starch. The established methods are simple, rapid, accurate, and sensitive. The results can lay a basis for the evaluation, and comprehensive development and utilization of the germplasm resources of Puerariae Thomsonii Radix and Puerariae Lobatae Radix.

Limiting silicon supply alters lignin content and structures of sorghum seedling cell walls.

Sorghum has been recognized as a promising energy crop. The composition and structure of lignin in the cell wall are important factors that affect the quality of plant biomass as a bioenergy feedstock. Silicon (Si) supply may affect the lignin content and structure, as both Si and lignin are possibly involved in plant mechanical strength. However, our understanding regarding the interaction between Si and lignin in sorghum is limited. Therefore, in this study, we analyzed the lignin in the cell walls of sorghum seedlings cultured hydroponically with or without Si supplementation. Limiting the Si supply significantly increased the thioglycolic acid lignin content and thioacidolysis-derived syringyl/guaiacyl monomer ratio. At least part of the modification may be attributable to the change in gene expression, as suggested by the upregulation of phenylpropanoid biosynthesis-related genes under -Si conditions. The cell walls of the -Si plants had a higher mechanical strength and calorific value than those of the +Si plants. These results provide some insights into the enhancement of the value of sorghum biomass as a feedstock for energy production by limiting Si uptake.

Fabrication of lignin-containing cellulose bio-composite based on unbleached corncob and wheat straw pulp.

In contemporary life, plastic, a kind of petroleum carbon source, has been produced and used in varieties of applications. However, the vast consumption of petroleum-based plastic and the burning of agricultural wastes make the environmental problems increasingly severe. Furthermore, a large number of lignocellulosic resources (such as corncob and wheat straw) are often wasted and burned, which will aggravate the environmental damage. In this paper, we use unbleached corncob and wheat straw pulp to fabricate the lignin-containing cellulose bio-composites (LCBs) to reduce non-renewable energy consumption and utilize agricultural wastes. The LCBs were obtained by a direct manufacturing process in benzyltrimethyl ammonium hydroxide (BzMe3NOH) aqueous solution under mild conditions, constituting an entwined composite structure of cellulose micro/nano-fibers. This unique micro/nano-structure provides bio-composites with the outstanding mechanical performance of 96.7 MPa and a high haze of 90.1%. Meanwhile, with the inherent lignin, the LCBs could filter over 81.8% UV-C. As the raw material used is pure natural lignocellulose, the bio-composites prepared have innate environmental friendliness. With exceptional mechanical strength, UV-shielding property, and innate environmental friendliness, the LCBs are possible and potential substitutes for traditional petroleum-based plastic that is easily aging or non-biodegradable.

Metatranscriptome Profiling of a Specialized Microbial Consortium during the Degradation of Nixtamalized Maize Pericarp.

Lignocellulose degradation by microbial consortia is multifactorial; hence, it must be analyzed from a holistic perspective. In this study, the temporal transcriptional activity of consortium PM-06, a nixtamalized maize pericarp (NMP) degrader, was determined and related to structural and physicochemical data to give insights into the mechanism used to degrade this substrate. Transcripts were described in terms of metabolic profile, carbohydrate-active enzyme (CAZyme) annotation, and taxonomic affiliation. The PM-06 gene expression pattern was closely related to the differential rates of degradation. The environmental and physiological conditions preceding high-degradation periods were crucial for CAZyme expression. The onset of degradation preceded the period with the highest degradation rate in the whole process, and in this time, several CAZymes were upregulated. Functional analysis of expressed CAZymes indicated that PM-06 overcomes NMP recalcitrance through modular enzymes operating at the proximity of the insoluble substrate. Increments in the diversity of expressed modular CAZymes occurred in the last stages of degradation where the substrate is more recalcitrant and environmental conditions are stressing. Taxonomic affiliation of CAZyme transcripts indicated that Paenibacillus macerans was fundamental for degradation. This microorganism established synergistic relationships with Bacillus thuringiensis for the degradation of cellulose and hemicellulose and with Microbacterium, Leifsonia, and Nocardia for the saccharification of oligosaccharides. IMPORTANCE Nixtamalized maize pericarp is an abundant residue of the tortilla industry. Consortium PM-06 efficiently degraded this substrate in 192 h. In this work, the temporal transcriptional profile of PM-06 was determined. Findings indicated that differential degradation rates are important sample selection criteria since they were closely related to the expression of carbohydrate-active enzymes (CAZymes). The initial times of degradation were crucial for the consumption of nixtamalized pericarp. A transcriptional profile at the onset of degradation is reported for the first time. Diverse CAZyme genes were rapidly transcribed after inoculation to produce different enzymes that participated in the stage with the highest degradation rate in the whole process. This study provides information about the regulation of gene expression and mechanisms used by PM-06 to overcome recalcitrance. These findings are useful in the design of processes and enzyme cocktails for the degradation of this abundant substrate.

Potential of Staphylea holocarpa Wood for Renewable Bioenergy.

Energy is indispensable in human life and social development, but this has led to an overconsumption of non-renewable energy. Sustainable energy is needed to maintain the global energy balance. Lignocellulose from agriculture or forestry is often discarded or directly incinerated. It is abundantly available to be discovered and studied as a biomass energy source. Therefore, this research uses Staphylea holocarpa wood as feedstock to evaluate its potential as energy source. We characterized Staphylea holocarpa wood by utilizing FT-IR, GC-MS, TGA, Py/GC-MS and NMR. The results showed that Staphylea holocarpa wood contained a large amount of oxygenated volatiles, indicating that it has the ability to act as biomass energy sources which can achieve green chemistry and sustainable development.