Potential of Staphylea holocarpa Wood for Renewable Bioenergy.

Energy is indispensable in human life and social development, but this has led to an overconsumption of non-renewable energy. Sustainable energy is needed to maintain the global energy balance. Lignocellulose from agriculture or forestry is often discarded or directly incinerated. It is abundantly available to be discovered and studied as a biomass energy source. Therefore, this research uses Staphylea holocarpa wood as feedstock to evaluate its potential as energy source. We characterized Staphylea holocarpa wood by utilizing FT-IR, GC-MS, TGA, Py/GC-MS and NMR. The results showed that Staphylea holocarpa wood contained a large amount of oxygenated volatiles, indicating that it has the ability to act as biomass energy sources which can achieve green chemistry and sustainable development.

Analytical and microwave pyrolysis of empty oil palm fruit bunch: Kinetics and product characterization.

This study is focused on kinetics and product distribution from untreated empty oil palm fruit bunch (EOPFB) biomass and treated EOPFB using analytical pyrolysis combined with gas chromatograph/mass spectrometer and Fourier transform infrared spectrometer, and microwave pyrolysis. Industrial water wash led to significant reduction in ash content of EOPFB from 5.9 wt% to 0.7 wt%. Isothermal mass loss data collected in the temperature range of 400-700 °C showed that fast pyrolysis in the Pyroprobe® reactor followed diffusion-controlled kinetics with apparent activation energies of 30.4 and 39.6 kJ mol-1 for untreated and treated EOPFB, respectively. Analytical pyrolysis of untreated EOPFB resulted in high selectivity to fatty acids, while phenolics dominated the pyrolysates from treated EOPFB. The selectivities to phenolic compounds were 74% and 57% from treated and untreated EOPFB, respectively, via microwave pyrolysis. The higher heating values of bio-crude from microwave pyrolysis of untreated and treated EOPFB were 30.1 and 29.7 MJ kg-1, respectively.

Two-step pyrolysis of corncob for value-added chemicals and high-quality bio-oil: Effects of alkali and alkaline earth metals.

Two-step pyrolysis (TSP) of corncob(CC) coupled with water and acid washing pretreatment was conducted to investigate the effects of alkali and alkaline earth metals (AAEMs) on TSP by Py-GC/MS. TG-FTIR was used to analyze the pyrolysis characteristics of the samples. The results showed that the removal of AAEMs postponed the pyrolysis process and significantly influenced the distribution of the pyrolysis products. As the content of AAEMs decreased, the bio-oil yield increased and the biochar yield decreased. TSP of CC achieved high selectivities for phenols and ketones in the first step and for hydrocarbons in the second step. TSP of acid-washed corncob (ACC) achieved high selectivities for furans in the first step and for sugars in the second step. Additionally, some value-added chemicals such as furfural (11.54%, ACC), 4-vinylphenol (23.57%, CC) and levoglucosan (43.05%, ACC) were also enriched in TSP. Therefore, a promising polygeneration scheme of TSP for the efficient utilization of biomass was proposed.

Effect of torrefaction pretreatment on the pyrolysis of rubber wood sawdust analyzed by Py-GC/MS.

The aim of this study was to investigate the effect of torrefaction on the pyrolysis of rubber wood sawdust (RWS) using pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Three typical torrefaction temperatures (200, 250, and 300 °C) and pyrolysis temperatures (450, 500, and 550 °C) were considered. The results suggested that only diethyl phthalate, belonging to esters, was detected at the torrefaction temperatures of 200 and 250 °C, revealing hemicellulose degradation. With the torrefaction temperature of 300 °C, esters, aldehydes, and phenols were detected, suggesting the predominant decomposition of hemicellulose and lignin. The double-shot pyrolysis indicated that the contents of oxy-compounds such as acids and aldehydes in pyrolysis bio-oil decreased with rising torrefaction temperature, implying that increasing torrefaction severity abated oxygen content in the bio-oil. With the torrefaction temperature of 300 °C, relatively more cellulose was retained in the biomass because the carbohydrate content in the pyrolysis bio-oil increased significantly.

Optimization Technology of the LHS-1 Strain for Degrading Gallnut Water Extract and Appraisal of Benzene Ring Derivatives from Fermented Gallnut Water Extract Pyrolysis by Py-GC/MS.

Gallnut water extract (GWE) enriches 80~90% of gallnut tannic acid (TA). In order to study the biodegradation of GWE into gallic acid (GA), the LHS-1 strain, a variant of Aspergillus niger, was chosen to determine the optimal degradation parameters for maximum production of GA by the response surface method. Pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) was first applied to appraise benzene ring derivatives of fermented GWE (FGWE) pyrolysis by comparison with the pyrolytic products of a tannic acid standard sample (TAS) and GWE. The results showed that optimum conditions were at 31 °C and pH of 5, with a 50-h incubation period and 0.1 g·L-1 of TA as substrate. The maximum yields of GA and tannase were 63~65 mg·mL-1 and 1.17 U·mL-1, respectively. Over 20 kinds of compounds were identified as linear hydrocarbons and benzene ring derivatives based on GA and glucose. The key benzene ring derivatives were 3,4,5-trimethoxybenzoic acid methyl ester, 3-methoxy-1,2-benzenediol, and 4-hydroxy-3,5-dimethoxy-benzoic acid hydrazide.

Pyrolytic characteristics of sweet potato vine.

To utilized biomass for optimum application, sweet potato vine (SPV) was studied on its pyrolytic characteristics by TGA and Py-GC/MS analysis as a representative of biomass with low lignin content and high extractives content. Results indicated that lignin, cellulose, hemicellulose and extractives contents were 7.85 wt.%, 33.01 wt.%, 12.25 wt.% and 37.12 wt.%, respectively. In bio-oil, sugars content firstly increased from 8.76 wt.% (350 °C) to 13.97 wt.% (400 °C) and then decreased to 9.19 wt.% (500 °C); linear carbonyls and linear acids contents decreased from 16.58 wt.% and 17.45 wt.% to 5.26 wt.% and 4.03 wt.%, respectively; furans content increased from 7.10 wt.% to 15.47 wt.%. The content 11.86 wt.% of levoglucose at 400 °C, 15.41 wt.% of acetic acid at 350 °C and 6.94 wt.% of furfural at 500 °C suggested good pyrolysis selectivity of SPV.

Isolation and structural characterization of the milled wood lignin, dioxane lignin, and cellulolytic lignin preparations from brewer's spent grain.

The structure of the lignin from brewer's spent grain (BSG) has been studied in detail. Three different lignin preparations, the so-called "milled-wood" lignin (MWL), dioxane lignin (DL), and cellulolytic lignin (CEL), were isolated from BSG and then thoroughly characterized by pyrolysis GC/MS, 2D-NMR, and derivatization followed by reductive cleavage (DFRC). The data indicated that BSG lignin presents a predominance of guaiacyl units (syringyl/guaiacyl ratio of 0.4-0.5) with significant amounts of associated p-coumarates and ferulates. The flavone tricin was also present in the lignin from BSG, as also occurred in other grasses. 2D-NMR (HSQC) revealed that the main substructures present are ß-O-4' alkyl-aryl ethers (77-79%) followed by ß-5' phenylcoumarans (11-13%) and lower amounts of ß-ß' resinols (5-6%) and 5-5' dibenzodioxocins (3-5%). The results from 2D-NMR (HMBC) and DFRC indicated that p-coumarates are acylating the γ-carbon of lignin side chains and are mostly involved in condensed structures. DFRC analyses also indicated a minor degree of γ-acylation with acetate groups, which takes place preferentially on S lignin (6% of S units are acetylated) over G lignin (only 1% of G units are acetylated).