Effects of different primers and colouring solutions on orthodontic bonding: shear bond strength and colour change.

OBJECTIVES: This in vitro study evaluated the effect of different colouring solutions and primer systems used in the bonding of brackets on enamel colour change and bond strength. MATERIALS AND METHODS: 120 premolar teeth were divided into four main groups; brackets were bonded with 37% orthophosphoric acid + Transbond XT Primer in Group 1, 3 M Single Bond Universal in Group 2, Transbond Plus SEP in Group 3, and G-Premio Bond in Group 4. Each group was divided into three subgroups, and the teeth were placed in a cup containing coffee and tea mixture, in a cup containing cola and in distilled water. A bond strength test was applied to all teeth. Colour measurements of all teeth were performed at 2 different times: before bonding and after the bond strength test. RESULTS: The average bond strength of the 37% orthophosphoric acid group was higher than that of the other groups. The effect of primer and solution groups on colour change was statistically significant (p = 0.001 and p = 0.023, respectively). CONCLUSIONS: In this study, the bond strength was clinically sufficient in all primer groups. The highest colour change was observed when the tea-coffee solution and Transbond Plus SEP primer were used. CLINICAL RELEVANCE: This study has identified enamel discoloration and bond strength from different colouring solutions and primer systems used for bonding braces, which can be used to inform clinicians and patients to achieve better treatment results.

Exploring the role of flavonoids in caries-affected dentin adhesion: A comprehensive scoping review.

OBJECTIVES: The aim of this scoping review was to evaluate the available scientific evidence regarding the use of flavonoids in the treatment of caries-affected dentin focusing on bonding to dentin. METHODS: A comprehensive literature search was performed in five databases from March 2022 and updated in April 2023: PubMed, EMBASE, Scopus, Web of Science, and Scielo. Additionally, the references of included studies were manually searched. Gray literature was excluded from the review. STUDY SELECTION: Inclusion criteria included in vitro, in situ, and in vivo studies (animal or human) published in English. Abstracts, reviews, case reports, book chapters, doctoral dissertations, guidelines, and studies using pure plant extracts were excluded. Data collected from the selected studies were summarized and subjected to narrative and descriptive analysis. Out of the 91 studies identified, only 16 studies met the inclusion criteria. RESULTS: The review analyzed eight different flavonoids (hesperidin, galardin, proanthocyanidin, genipin, quercetin, naringin, epigallocatechin-3-gallate, and other catechins subtypes) used as pretreatment or loaded into adhesive systems, primers, and phosphoric acid. The use of flavonoids improved the mechanical properties of the materials and modified the biological properties of the dentin, reducing collagen loss by the inhibition of proteolytic activity of matrix metalloproteinases (MMPs). CONCLUSIONS: Based on the findings of this scoping review, it can be concluded that the use of flavonoids as pretreatment or incorporation into dental materials preserves collagen in the hybrid layer, inhibiting the MMPs activities, modifying the collagen fibrils of the dentin matrix and improving the mechanical properties of the dental adhesive systems. Therefore, it represents a promising approach for promoting dentin biomodification. This can result in more stable bonding of adhesive restorations to caries-affected dentin.

Photochemical Synthesis of Lactones, Cyclopropanes and ATRA Products: Revealing the Role of Sodium Ascorbate.

Light-mediated processes have received significant attention, since they have re-surfaced unconventional reactivity platforms, complementary to conventional polar chemistry. γ-Lactones and cyclopropanes are prevalent moieties, found in numerous natural products and pharmaceuticals. Among various methods for their synthesis, light-mediated protocols are coming to the spotlight, although these are contingent upon the use of photoorgano- or metal-based catalysts. Herein, we introduce a novel photochemical activation of iodo-reagents via the use of cheap sodium ascorbate or ascorbic acid to enable their homolytic scission and addition onto double bonds. The developed protocol was applied successfully to the formal [3+2] cycloaddition for the synthesis of γ-lactones, traditional atom transfer radical addition (ATRA) reactions and the one-pot two-step conversion of alkenes to cyclopropanes. In all cases, the desired products were obtained in good to high yields, while the reaction mechanism was thoroughly investigated. Depending on the nature of the iodo-reagent, a halogen or a hydrogen-bonded complex is formed, which initiates the process.

(+)-Cedrol hemihydrate: a natural product derived from drying eastern red cedar (Juniperus virginiana) wood.

Cedrol-like compounds are of pharmacological interest due to their diverse range of medicinal effects and are used globally in traditional medicines and cosmetics. Many cedrol tautomers are known from molecular studies but few have been studied in crystalline form by X-ray diffraction. Acicular white crystals collected from the wood of eastern red cedar (Juniperus virginiana) are determined to be (+)-cedrol hemihydrate, namely, (1S,2R,5S,7R,8R)-2,6,6,8-tetramethyltricyclo[5.3.1.01,5]undecan-8-ol hemihydrate, C15H26O·0.5H2O, a novel packing of two unique cedrol molecules (Z' = 2) with a single water molecule [space group P212121; a = 6.1956 (1), b = 14.5363 (1), and c = 30.9294 (4) Å]. The hydrogen bonding forms a one-dimensional spiral chain running along the a axis, following the chirality of the cedrol molecule, through hydrogen-bonding interactions with a right-handed helical configuration in graph-set notation Δ-C33(6) > a > c > b. The crystal packing and symmetry are different from crystalline isocedrol due to the different hydrogen-bonding geometry.

Adhesive Bond Strength of Restorative Materials to Caries-Affected Dentin Treated with Antimicrobial Photodynamic Therapy: A Systematic Review and Meta-Analysis.

Objective: This systematic review aimed to evaluate the adhesive bond strength of restorative materials to caries-affected dentin (CAD) treated with antimicrobial photodynamic therapy (aPDT) in comparison with conventional chemical disinfectants. Methods: Three databases, including the Web of Science, Scopus, and PubMed, were searched to address the focused question: "What is the effect of aPDT compared to conventional chemical disinfection techniques on the adhesive bond strength of restorative materials to CAD?." Search keywords included "dentin*" "adhes bond*" "caries-affected dentin" "photodynamic "photochemotherapy" "photosensitizing agent" "phototherapy" "photoradiation" "laser" "light activated" "photoactivated." A fixed-effects model was used in each meta-analysis and the inverse variance was used to calculate the standard mean difference (SMD). For evaluating the statistical heterogeneity, the Cochrane's Q test and the I2 statistics were used. The risk of bias was evaluated based on the Cochrane Collaboration's tool. Results: Fourteen studies were included in the qualitative as well as quantitative analysis. The results of the meta-analyses exhibited an SMD of 2.38% [95% confidence interval (CI): 2.03-2.73; p < 0.00001], indicating a statistically significant difference in the shear bond strength scores between the tested group (samples treated with aPDT) and the control group (i.e., favoring the sound dentin and/or conventional chemical disinfectants). Contrarily, an SMD of -1.46% (95% CI: -2.04 to -0.88; p < 0.00001) and -0.37% (95% CI: -0.70 to -0.03; p = 0.03) was observed, indicating a statistically significant difference in the microtensile bond strength (µTBS), as well as microleakage scores between the tested group (favoring the samples treated with aPDT) and the control group (i.e., sound dentin and/or conventional chemical disinfectants). Conclusions: Adhesive bond strength of restorative materials to CAD treated with conventional chemical disinfectants showed superior outcomes compared to photodynamic therapy (aPDT).

Preliminary evidence of psychological improvements and increased maternal-fetal attachment associated with a mindfulness sleep programme: secondary analysis of uncontrolled data in 11 pregnant women with insomnia disorder.

Treating insomnia during pregnancy improves sleep and depressed mood. However, given well-established links between poor sleep and a broad spectrum of adverse maternal outcomes, the benefits of insomnia care may reach beyond sleep and depression. The present study evaluated the preliminary efficacy of 'Perinatal Understanding of Mindful Awareness for Sleep' (PUMAS)-a mindfulness sleep programme tailored to pregnancy that combines behavioural sleep strategies and meditation-for enhancing everyday mindfulness and maternal-fetal attachment, as well as for alleviating anxiety, repetitive thinking, and sleep-related daytime impairment. We conducted a secondary analysis of a single-arm proof-of-concept trial of 11 pregnant women with fifth edition of the Diagnostic and Statistical Manual of Mental Disorders diagnosed insomnia disorder who completed PUMAS (six sessions), which was delivered in an individual format via telemedicine video. Pre- and post-treatment outcomes included the Cognitive and Affective Mindfulness Scale-Revised (CAMS-R), Maternal-Fetal Attachment Scale (MFAS), Generalised Anxiety Disorder seven-item survey (GAD-7), Perseverative Thinking Questionnaire (PTQ), Daytime Insomnia Symptoms Response Scale (DISRS), and the Patient-Reported Outcomes Measurement Information System Sleep-Related Impairment Scale (PROMIS-SRI). Symptom changes were evaluated with paired-samples t tests. Results showed PUMAS patients reported large increases in CAMS-R (Cohen's dz = 1.81) and medium-large increases in MFAS scores (Cohen's dz = 0.73). Moreover, PUMAS patients reported large reductions in scores on the GAD-7 (Cohen's dz = 1.09), PTQ (Cohen's dz = 1.26), DISRS (Cohen's dz = 1.38), and PROMIS-SRI (Cohen's dz = 1.53). Preliminary evidence suggests that a mindfulness-based perinatal sleep programme may benefit several domains of maternal wellbeing beyond sleep and depression. PUMAS substantially enhanced patient ratings of everyday mindfulness and maternal-fetal attachment, while reporting alleviations in anxiety, perseverative thinking, insomnia-focused rumination, and sleep-related daytime impairment.

Dynamic Covalent Bonds in the Ebselen Class of Antioxidants Probed by X-ray Quantum Crystallography.

Dynamic bonds are essential structural ingredients of dynamic covalent chemistry that involve reversible cleavage and formation of bonds. Herein, we explore the electronic characteristics of Se-N bonds in the organo-selenium antioxidant ebselen and its derivatives for their propensity to function as dynamic covalent bonds by employing high-resolution X-ray quantum crystallography and complementary computational studies. An analysis of the experimentally reconstructed X-ray wavefunctions reveals the salient electronic features of the Se-N bonds with very low electron density localized at the bonding region and a positive Laplacian value at the bond critical point. Bond orders and percentage covalency and ionicity estimated from the X-ray wavefunctions, along with localized orbital locator (LOL) and electron localization function (ELF) analyses show that the Se-N bond is unique in its closed shell-like features, despite being a covalent bond. Time-dependent DFT calculations simulate the cleavage of Se-N bonds in ebselen in the excited state, further substantiating their nature as dynamic bonds.

Structural and functional interactions between the EF hand domain and S2-S3 loop in the type-1 ryanodine receptor ion channel.

Previous cryo-electron micrographs suggested that the skeletal muscle Ca2+ release channel, ryanodine receptor (RyR)1, is regulated by intricate interactions between the EF hand Ca2+ binding domain and the cytosolic loop (S2-S3 loop). However, the precise molecular details of these interactions and functional consequences of the interactions remain elusive. Here, we used molecular dynamics simulations to explore the specific amino acid pairs involved in hydrogen bond interactions within the EF hand-S2-S3 loop interface. Our simulations unveiled two key interactions: (1) K4101 (EF hand) with D4730 (S2-S3 loop) and (2) E4075, Q4078, and D4079 (EF hand) with R4736 (S2-S3 loop). To probe the functional significance of these interactions, we constructed mutant RyR1 complementary DNAs and expressed them in HEK293 cells for [3H]ryanodine binding assays. Our results demonstrated that mutations in the EF hand, specifically K4101E and K4101M, resulted in reduced affinities for Ca2+/Mg2+-dependent inhibitions. Interestingly, the K4101E mutation increased the affinity for Ca2+-dependent activation. Conversely, mutations in the S2-S3 loop, D4730K and D4730N, did not significantly change the affinities for Ca2+/Mg2+-dependent inhibitions. Our previous finding that skeletal disease-associated RyR1 mutations, R4736Q and R4736W, impaired Ca2+-dependent inhibition, is consistent with the current results. In silico mutagenesis analysis aligned with our functional data, indicating altered hydrogen bonding patterns upon mutations. Taken together, our findings emphasize the critical role of the EF hand-S2-S3 loop interaction in Ca2+/Mg2+-dependent inhibition of RyR1 and provide insights into potential therapeutic strategies targeting this domain interaction for the treatment of skeletal myopathies.

Facile Synthesis of Asymmetric aza-Boron Dipyrromethene Analogues Bearing Quinoxaline Moiety.

An asymmetric aza-BODIPY analogue bearing quinoxaline moiety was synthesized via a titanium tetrachloride-mediated Schiff-base-forming reaction of 6,7-dimethyl-1,4-dihydroquinoxaline-2,3-dione and benzo[d]thiazol-2-amine. This novel aza-BODIPY analogue forms a complementary hydrogen-bonded dimer due to the quinoxaline moiety in the crystal structure. It also shows intense absorption and fluorescence, with fluorescence quantum yields close to unity. The electrochemical measurements and the DFT calculations revealed the presence of the low-lying HOMO, which benefits their potential applications as an electron-transporting material.

Design and Construction of the Optical Bench Interferometer for the Taiji Program.

A kind of full-function two-sided optical bench interferometer (OBI) is designed to meet the practical requirements of the Taiji Program for space gravitational wave detection. The main optical paths are arranged on the A-side for transmission and interference, and other optical paths and electronic devices are placed on the B-side. According to the design scheme, we successfully constructed two OBIs by using hydrogen-oxygen catalytic stress-free bonding technology. When the OBI is installed and adjusted, the position and Angle error of the interference beam are controlled within 30 µm and 50 µrad through the self-designed precision mechanical clamping mechanism and beam position measuring device. The built OBI was placed on the vibration isolation platform in the vacuum tank for the stability test. The test results show that the noise of the OBI is less than 10 pm/√Hz in the frequency band of 0.1 Hz to 1 Hz, which meets the noise budget requirements of the Taiji Pathfinder in the middle- and high-frequency band.

Ortho-Alkoxy-benzamide Directed Formation of a Single Crystalline Hydrogen-bonded Crosslinked Organic Framework and Its Boron Trifluoride Uptake and Catalysis.

Boron trifluoride (BF3 ) is a highly corrosive gas widely used in industry. Confining BF3 in porous materials ensures safe and convenient handling and prevents its degradation. Hence, it is highly desired to develop porous materials with high adsorption capacity, high stability, and resistance to BF3 corrosion. Herein, we designed and synthesized a Lewis basic single-crystalline hydrogen-bond crosslinked organic framework (HC OF-50) for BF3 storage and its application in catalysis. Specifically, we introduced self-complementary ortho-alkoxy-benzamide hydrogen-bonding moieties to direct the formation of highly organized hydrogen-bonded networks, which were subsequently photo-crosslinked to generate HC OFs. The HC OF-50 features Lewis basic thioether linkages and electron-rich pore surfaces for BF3 uptake. As a result, HC OF-50 shows a record-high 14.2 mmol/g BF3 uptake capacity. The BF3 uptake in HC OF-50 is reversible, leading to the slow release of BF3 . We leveraged this property to reduce the undesirable chain transfer and termination in the cationic polymerization of vinyl ethers. Polymers with higher molecular weights and lower polydispersity were generated compared to those synthesized using BF3 ⋅ Et2 O. The elucidation of the structure-property relationship, as provided by the single-crystal X-ray structures, combined with the high BF3 uptake capacity and controlled sorption, highlights the molecular understanding of framework-guest interactions in addressing contemporary challenges.

Effects of Varied Omega-3 Fatty Acid Supplementation on Postpartum Mental Health and the Association between Prenatal Erythrocyte Omega-3 Fatty Acid Levels and Postpartum Mental Health.

We investigated the postpartum mental health of women who had consumed perilla oil or fish oil containing various omega-3 fatty acids for 12 weeks starting in mid-pregnancy. The association between fatty acids in maternal erythrocytes and mental health risk factors was also examined. Healthy Japanese primiparas in mid-pregnancy (gestational weeks 18-25) were randomly divided into two groups and consumed approximately 2.0 g/day of omega-3 fatty acids in either perilla oil (the ALA dose was 2.4 g/day) or fish oil (the EPA + DHA dose was 1.7 g/day) for 12 weeks. Maternal mental health was assessed using the Edinburgh Postnatal Depression Scale (EPDS) as the primary measure and the Mother-to-Infant Bonding Scale (MIBS) as the secondary measure. Data from an observational study were used as a historical control. Maternal blood, cord blood, and colostrum samples were collected for fatty acid composition analysis. In addition, completers of the observational studies were enrolled in a case-control study, wherein logistic regression analysis was performed to examine the association between maternal fatty acids and EPDS score. The proportion of participants with a high EPDS score (≥9) was significantly lower in the perilla oil group (12.0%, p = 0.044) but not in the fish oil group (22.3%, p = 0.882) compared with the historical control (21.6%), while the proportions between the former groups also tended to be lower (p = 0.059). No marked effect of omega-3 fatty acid intake was observed from the MIBS results. In the case-control study of the historical control, high levels of α-linolenic acid in maternal erythrocytes were associated with an EPDS score of <9 (odds ratio of 0.23, 95% confidence interval: 0.06, 0.84, p = 0.018 for trend). The results of this study suggest that consumption of α-linolenic acid during pregnancy may stabilize postpartum mental health.

The loss of resin cement adhesion to ceramic influences the fatigue behavior of bonded lithium disilicate restorations.

When partial and/or non-retentive preparation, such as those for occlusal veneers, is indicated, a proper and stable adhesion is essential. Therefore, the aim of this in vitro study was to evaluate the effect of loss of adhesion in different regions of the bonding interface on the fatigue behavior of simplified lithium disilicate restorations. For this, lithium disilicate (IPS e.max CAD) discs (1 mm thick and Ø = 10 mm) were fabricated, polished with #400-, #600-, #1200-grit silicon carbide (SiC) papers, and crystallized. As substrate, fiber-reinforced resin epoxy discs (2.5 mm thick and Ø = 10 mm) were fabricated and polished with #600-grit SiC paper. The ceramic bonding surface was treated with 5% hydrofluoric acid and a silane-containing primer (Monobond N), while the substrate was etched with 10% hydrofluoric acid followed by the application of the bonding system primers (Primer A + B). A lacquer (nail polish) was used to simulate the loss of adhesion in specific areas according to the study design to compose the testing groups: bonded (control; did not received nail polish application); - non-bonded (loss of adhesion in the whole specimen area); - margin (loss of adhesion in the ceramic margin); - center (loss of adhesion in the ceramic central area). The adhesive area of partially bonded groups was 50% of the adhesive surface. Then, the discs (n = 12) were bonded to the respective substrate using a resin cement (Multilink N), light-cured, water-stored for 90 days, and subjected to thermocycling (25,000 cycles, 5° to 55 °C) before testing. A cyclic fatigue test was run (20 Hz, initial load of 200 N for 5000 cycles, 50 N step size for 10,000 cycles each until specimen failure), and the fatigue failure load and number of cycles for failure were recorded. As complementary analysis, finite element analysis (FEA) and scanning electron microscopy analysis were performed. Kaplan-Meier log-rank (Mantel-Cox) was conducted for survival analysis. The results showed that as the loss of adhesion reaches the central area, the worse is the fatigue behavior and the higher is the stress peak concentration in the ceramic bonding surface. The bonded specimens presented better fatigue behavior and stress distribution compared to the others. In conclusion in a non-retentive preparation situation, proper adhesion is a must for the restoration fatigue behavior even after aging; while the loss of adhesion reaches central areas the mechanical functioning is compromised.

Comparative evaluation of effect of chlorhexidine application on dentin bond strength with two different adhesives after ER, CR: YSGG phototherapy: an in vitro study.

This study aimed to assess the efficacy of phototherapy with an Er, Cr:YSGG laser on the bond strength of dentin using two different adhesive systems after chlorhexidine (CHX) application. Twenty-four non-carious human molar teeth were separated into three main groups: negative control Group A (Group A), CHX and phototherapy with an Er, Cr:YSGG laser (Group PC), and CHX with conventional diamond bur (no phototherapy) (Group C). These groups were divided into two subgroups based on adhesives: Clearfil Universal Quick Bond and Clearfil SE Bond. To evaluate the microtensile bond strength, the occlusal enamel surfaces of the teeth were removed with a low-speed, water-cooled diamond bur to expose hard dentin tissue. The teeth within Group PC were treated with Er, Cr:YSGG phototherapy. The surfaces were then disinfected with 0.2% chlorhexidine gluconate. Subgroups were applied according to the manufacturer's instructions using the adhesive systems mentioned above. Following adhesive application, the teeth were restored with composite resin. A microtensile bond strength test was performed on the test sticks obtained from the teeth using a universal test device. Data were analyzed using variance analysis (ANOVA) at a significance level of p < 0.05. Among all groups, the highest bond strength was achieved with Clearfil SE Bond with CHX + phototherapy (45.6 ± 4.2), while the lowest was achieved with Clearfil Universal Quick Bond without phototherapy (control group) (27.0 ± 6.7) (p < 0.05). Phototherapy with Er, Cr: YSGG following chlorhexidine application enhanced the bond strength of both the bond systems (p < 0.05).

Orofacial myofunctional reeducation assisted by a prefabricated reeducation appliance: towards a necessary paradigm shift / Rééducation myofonctionnelle orofaciale assistée par gouttière de rééducation préfabriquée et orthodontie : vers un nécessaire changement de paradigme

Introduction: Orofacial myofunctional reeducation (OFMR) is the rehabilitation of the muscles, functions and resting postures of the orofacial complex. It is used in the therapeutic management of orofacial dysfunction in patients of all ages and with a wide range of disorders and comorbidities. Objective: The main objective of this article was to advocate the association of orofacial myofunctional reeducation (OFMR) with the use of prefabricated reeducation appliances (PRAs) in orthodontics. Material and Method: A summary of published data was carried out and the conclusions of a cross-sectional epidemiological study were reported. The aim of the study was to assess the current state of orofacial myofunctional rehabilitation in orthodontics in France. Consideration was given to the relevance of the arguments put forward by manufacturers regarding the specific features of their devices and their supposed effects. Results: Published data, albeit of uneven methodological quality, seem to show the superiority of orofacial myofunctional reeducation combined with the use of a prefabricated reeducation appliance (PRA), compared with the use of OFMR without PRA. A new, more effective, simpler and less time-consuming approach to PRA-assisted OFMR is proposed. The project for a new model of prefabricated reeducation appliance is presented. Ten clinical cases are presented to illustrate the clinical and administrative aspects of this PRA-assisted RMOF. Original clinical approaches are also presented: mandibular disocclusion and recentering wedges (MDRW), anti-retrusion wedges (ARW) and sequential multi-attachment bonding (SMB), mandibular then maxillary. Conclusion: PRA-assisted OFMR appears to be a necessary paradigm shift, which it would be useful to offer our patients.

Introduction: La rééducation myofonctionnelle orofaciale (RMOF) est la rééducation des muscles, des fonctions et des postures de repos du complexe orofacial. Elle est utilisée dans la prise en charge thérapeutique des dysfonctionnements orofaciaux chez des patients de tous âges et présentant un large éventail de troubles et de comorbidités. Objectif: L'objectif principal de cet article était de prôner l'association de la rééducation myofonctionnelle orofaciale (RMOF) avec le port d'une gouttière de rééducation préfabriquée (GRP) en orthodontie. Matériel et méthode: Une synthèse des données publiées a été effectuée et les conclusions d'une étude épidémiologique transversale ont été rapportées. Elle avait été menée pour dresser un état des lieux de la pratique de la rééducation myofonctionnelle orofaciale en orthodontie en France. Une réflexion a été conduite sur la pertinence des arguments avancés par les fabricants quant aux particularités de leurs dispositifs et leurs effets supposés. Résultats: Les données publiées, même de qualité méthodologique inégale, semblent montrer la supériorité d'une rééducation myofonctionnelle orofaciale associée au port d'une gouttière de rééducation préfabriquée (GRP) comparée à la mise en œuvre d'une RMOF sans GRP. Une nouvelle approche de la RMOF assistée par GRP, plus efficace, plus simple et moins chronophage est proposée. Le projet d'un nouveau modèle de gouttière de rééducation préfabriquée est exposé. Dix cas cliniques sont présentés pour illustrer les volets clinique et administratif de cette RMOF assistée par GRP. Des approches cliniques originales sont également exposées : cales de désocclusion et de recentrage mandibulaire (CDRM), cales anti-rétrusion (CAR) et collage multiattache séquentiel (CMS), mandibulaire puis maxillaire. Conclusion: La RMOF assistée par GRP apparaît comme un nécessaire changement de paradigme, dont il semble utile de faire bénéficier nos patients.

Antiviral and Antibacterial Cold Spray Coating Application on Rubber Substrate, Disruption in Disease Transmission Chain.

The objective of this study was to prepare a copper-coated rubber surface using cold spray technology with improved virucidal and antimicrobial properties to fight against highly transmissible viruses and bacteria. A successful cold spray coating was produced using irregular-shaped pure Cu powder on an escalator handrail rubber. The powder particles and the deposited coatings (single and double pass) were characterized in terms of particle morphology and size distribution, coating surface and coat/substrate cross-section properties. The bonding between powder and rubber surfaces was purely mechanical interlocking. The Cu powder penetration depth within the rubber surface increases with a number of depositions pass. The virucidal properties of the coated surface were tested utilizing surrogates for SARS-CoV-2: HCoV-229E, a seasonal human coronavirus, and baculovirus, a high-titer enveloped insect cell virus. A double-pass coated surface showed significant baculovirus inactivation relative to a bare rubber control surface after 2-h (approximately 1.7-log) and 4-h (approximately 6.2-log), while a 4-h exposure reduced HCoV-229E titer to below the limit of detection. A similar microbial test was performed using E. coli, showing a 4-log microbial reduction after 2-h exposure relative to the bare rubber. These promising results open a new application for cold spray in the health sector. Supplementary Information: The online version contains supplementary material available at 10.1007/s11666-023-01553-x.

Effects of a prenatal mindfulness program on longitudinal changes in stress, anxiety, depression, and mother-infant bonding of women with a tendency to perinatal mood and anxiety disorder: a randomized controlled trial.

BACKGROUND: Stress is a risk factor for poor physical and mental health, affecting new mothers' ability, especially those with perinatal mood and anxiety disorders, to maintain their everyday lives. Over the past 50 years, global incidences of depression and anxiety disorders have increased, reaching pandemic levels. These incidences represent major public health issues that are challenging to detect and treat. Mindfulness programs are viable for reducing stress, anxiety, and depression. The present study evaluates mindfulness intervention effects on stress, anxiety, depression, and mother-infant bonding. METHODS: We collected data on 102 women participating in a prenatal mindfulness program between July 2021 and March 2022; they were parallel and randomly assigned to experimental or control groups. The intervention group received an 8-week course in a prenatal mindfulness program, and the control group received usual standard prenatal care. The self-reported stress, pregnancy-related anxiety, and depression were assessed before and after the intervention and at 36 weeks of gestation. At 2 and 4 months postpartum, all participants provided self-reported their levels of stress, depression, and quality of mother-infant bonding. RESULTS: Compared to the control group, the experimental group that received the prenatal mindfulness intervention experienced reduced prenatal stress, anxiety, and depression and reduced postnatal stress and depression. Despite this, there was no significant difference between the groups in terms of the quality of mother-infant bonding. CONCLUSIONS: Mindfulness prenatal programs are convenient and effective methods of decreasing stress, anxiety, and depression during the perinatal period. Based on our findings, prenatal mindfulness may play a role in mitigating mood and anxiety disorders and should be considered in future approaches to preventing psychological distress. TRIAL REGISTRATION NUMBER: This trial has been prospectively registered at ClinicalTrials.gov (NCT04693130) and the first registration date was 12/24/2020.

Implementation of neonatal phototherapy with the BiliCocoon Bag® device in the maternity ward and impact on mother-infant separation.

BACKGROUND: Free bilirubin jaundice is a frequent pathology in the neonatal period. The major complication is neurological toxicity, the most severe form of which is kernicterus. Overall, 5%-10% of jaundiced neonates require treatment. The first-line treatment is phototherapy, with intensive phototherapy being the gold standard. Other equipment is also available, including the BiliCocoon Bag®. It is a safe and controlled therapy that can be performed in the mother's room in the maternity ward, thereby avoiding separation and allowing for breast- or bottle-feeding during treatment. It is easy to install and does not require protective glasses, thus no scope or hospitalization. In our maternity ward, all neonates requiring intensive phototherapy are hospitalized in the neonatology ward. OBJECTIVE: The objective of our study was to evaluate the number of avoided hospitalizations in neonatology for free bilirubin jaundice since the introduction, according to a strict protocol, of the BiliCocoon Bag® device. MATERIAL AND METHOD: This was a single-center retrospective cohort study using data of newborns usually collected as part of standard care. Children born in our maternity ward during an 18-month period (August 1, 2020 to January 31, 2022) were included. Causes of jaundice, age at the beginning and mode of treatment, number of sessions for each device, and length of stay were compared. Results are presented as number and percentage with median (25th-75th) or mean (extremes) values for categorical and continuous variables, respectively. A t-test was used to compare the means of the independent groups. RESULTS: A total of 316 newborns were included. Physiological jaundice was the main cause of jaundice. The median age for the first phototherapy treatment was 54.5 h (30-68). The 316 neonates needed 438 phototherapy sessions: 235 (74%) neonates required only one phototherapy session, 85 (36%) of them were treated with the BiliCocoon Bag®. For the 81 children who needed two or more phototherapy sessions, 19 children (23.5%) were treated by tunnel phototherapy and then the BiliCocoon Bag®, and eight children (10%) by BiliCocoon Bag® alone. The BiliCocoon Bag® enabled a relative reduction in the hospitalization rate of 38% and avoided hospitalization for approximately one third of the newborns treated. The BiliCocoon Bag® failure rate was 3.6% and the average length of stay was comparable between the two types of treatment. CONCLUSION: Following a strict protocol of use, the BiliCocoon Bag® is a reliable method and a good alternative to intensive phototherapy for newborns in the maternity ward, as it avoids hospitalization and mother-infant separation.

[Traumatic childbirth and trauma-sensitive obstetric support]. / Traumatische Geburt und traumasensible Geburtsbegleitung.

Childbirth can be a very happy and empowering experience for women but also one of suffering and despair. Biographical traumatic experiences, especially sexual, physical and emotional violence, are risk factors for a traumatic childbirth experience with the danger of subsequent trauma sequelae and impaired mother-child bonding; however, obstetrically indicated interventions or poor communication in the delivery room can also primarily be experienced as traumatic.In recent years, policies affecting traumatic childbirth experience have been controversially and sometimes emotionally discussed. In the clinical obstetric routine there is often a fine line between medically necessary rapid interventions and emotionally supportive trauma-sensitive and preventive obstetric care. The following article addresses the causes and prevention strategies of traumatic childbirth experiences from obstetric, midwifery and psychotherapeutic perspectives.

Green synthesis of Ag nanoparticles from Argemone mexicana L. leaf extract coated with MOF-5 for the removal of metronidazole antibiotics from aqueous solution.

There are growing concerns about the toxicity of metronidazole (MNZ) antibiotics in wastewater, which must be removed. This study used AgN/MOF-5 (1:3) to investigate the adsorptive removal of MNZ antibiotics from wastewater. Green synthesis of Ag-nanoparticles was from Argemone mexicana leaf aqueous extract blended with the synthesized MOF-5 in 1:3 by proportion. The adsorption materials were characterized by scanning electron microscope (SEM), N2 adsorption-desorption analysis, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The surface area increased due to the appearance of micropores. Besides, the efficiency of AgN/MOF-5 (1:3) for MNZ removal was evaluated by adsorption properties, including key influential parameters (adsorbent dosage, pH, contact time, etc.) and adsorption mechanism, kinetics/isotherms. The results from the adsorption process conformed to pseudo-second-order kinetics (R2 = 0.998) and well fitted with the Langmuir isotherm having 191.1 mg/g maximum adsorption capacity. The adsorption mechanism of AgN/MOF-5 (1:3) was due to the interactions of π-π stacking, Ag-N-MOF covalent bonding and hydrogen bonding. Thus, AgN/MOF-5 (1:3) is a potential adsorbent for the removal of aqueous MNZ. The adsorption process is endothermic, spontaneous, and feasible based on the obtained thermodynamic parameter of ΔHO and ΔSO having 14.72 and 0.129 kJ/mol respectively.