Surviving indoor heat stress in United States: A comprehensive review exploring the impact of overheating on the thermal comfort, health, and social economic factors of occupants.

In the face of escalating global climate change and the increasing frequency of extreme heat events, the mitigation of building overheating has become an urgent priority. This comprehensive review converges insights from building science and public health domains to offer a thorough understanding of the multifaceted impacts of indoor overheating on occupants. The paper addresses a significant research gap by offering a holistic exploration of indoor overheating of residential buildings and its consequences, with a specific focus on the United States, an economically diverse nation that has been underrepresented in the literature. The review illuminates the effects of overheating on thermal comfort, health, and socio-economic aspects within the built environment. It emphasizes associated repercussions, including heightened cooling energy consumption, increased peak electricity demand, and elevated vulnerability, leading to exacerbated heat-related mortality and morbidity rates, especially among disadvantaged groups. The study concludes that vulnerabilities to these impacts are intricately tied to regional climatic conditions, highlighting the inadequacy of a one-size-fits-all approach. Tailored interventions for each climate zone are deemed necessary, considering the consistent occurrence of indoor temperatures surpassing outdoor levels, known as superheating, which poses distinct challenges. The research underscores the urgency of addressing indoor overheating as a critical facet of public health, acknowledging direct socioeconomic repercussions. It advocates for further research to inform comprehensive policies that safeguard public health across diverse indoor environments.

Effects of monensin in supplements for beef cattle in tropical grazing systems during the rainy season.

Two experiments were carried out to evaluate the effect of monensin in supplements for grazing heifers. In experiment I, treatments consisted of protein supplements (low intake - 0.5 kg/animal/day and high intake - 1.0 kg/animal/day) associated or not with monensin. Animal performance, nutrient intake, and digestibility were evaluated. Forty crossbred heifers with an initial body weight (BW) of 213.8 ± 4.5 kg were used. There was no difference in average daily gain between treatments (average of 0.588 kg/animal/day). There was no interaction between monensin and supplements for intake parameters and digestibility. Dry matter (DM) intake was equal between treatments (~ 2% of BW). However, there was a reduction in pasture intake with the high-intake supplement. In experiment II, treatments consisted of two types of supplements (protein or mineral) associated or not with monensin. The variables analyzed were productive performance, ingestive behavior, and thermal comfort, evaluated through the index of thermal stress for cows (ITSC). Forty crossbred heifers with a BW of 159.2 ± 1.3 kg were used. The type of supplement did not influence the performance of the animals. However, monensin promoted greater weight gain in the animals (110 g/animal/day). There was an interaction effect between supplementation and monensin addition on behavioral activities, except for idle time. The inclusion of monensin in the protein supplement reduced the grazing time. The ITSC value influenced the activities of ingestive behavior, and the increase of this index reduced the grazing time in all treatments. Forage quality influences the response to monensin use, and the addition of monensin in supplements for grazing cattle during the rainy season is recommended for forages with high CP content.

The Effects of Active Warming on Core Body Temperature and Thermal Comfort in Patients After Transurethral Resection of the Prostate: A Randomized Clinical Trial.

Prevention and treatment of hypothermia by active warming in perioperative period care is recommended but scientific evidence of its effectiveness in a clinical setting is scarce. The purpose of this study was to determine the effects of warmed intravenous fluids (WIVF) on the core body temperature and the patients' thermal comfort. Baseline data of 105 male patients undergoing TUR-P surgery and bladder irrigation were analyzed. The experimental group was warmed using active WIVF, and the control group's routine care was conducted using a cotton blanket. Body temperature was higher in patients in the experimental group than those in the control group. Repeated measures Manova revealed significantly different core temperature changes between groups (F = 34.446, p = .001). The thermal comfort scores were also higher in the experimental group than in the control group (x2 = 203.552, p = .001). The findings indicated that WIVF can enhance body temperature and improve the thermal comfort of patients.

The role of outdoor microclimatic features at long-term care facilities in advancing the health of its residents: An integrative review and future strategies.

Projections show that Earth's climate will continue to warm concurrent with increases in the percentage of the world's elderly population. With an understanding that the body's resilience to the heat degrades as it ages, these coupled phenomena point to serious concerns of heat-related mortality in growing elderly populations. As many of the people in this age cohort choose to live in managed long-term care facilities, it's imperative that outdoor spaces of these communities be made thermally comfortable so that connections with nature and the promotion of non-sedentary activities are maintained. Studies have shown that simply being outside has a positive impact on a broad range of the psychosocial well-being of older adults. However, these spaces must be designed to afford accessibility, safety, and aesthetically pleasing experiences so that they are taken full advantage of. Here, we employ an integrative review to link ideas from the disciplines of climate science, health and physiology, and landscape architecture to explain the connections between heat, increased morbidity and mortality in aging adults, existing gaps in thermal comfort models, and key strategies in the development of useable, comfortable outdoor spaces for older adults. Integrative reviews allow for new frameworks or perspectives on a subject to be introduced. Uncovering the synergy of these three knowledge bases can contribute to guiding microclimatic research, design practitioners, and care providers as they seek safe, comfortable and inviting outdoor spaces for aging adults.

The effects of local versus systemic passive heating on the acute inflammatory, vascular and glycaemic response.

The aim of this study was to compare the acute cardiometabolic and perceptual responses between local and whole-body passive heating. Using a water-perfused suit, 10 recreationally active males underwent three 90 min conditions: heating of the legs with upper-body cooling (LBH), whole-body heating (WBH) and exposure to a thermoneutral temperature (CON). Blood samples were collected before and up to 3 h post-session to assess inflammatory markers, while a 2 h oral glucose tolerance test was initiated 1 h post-session. Femoral artery blood flow and perceptual responses were recorded at regular intervals. The interleukin (IL)-6 incremental area under the curve (iAUC) was higher for LBH (1096 ± 851 pg/mL × 270 min) and WBH (833 ± 476 pg/mL × 270 min) compared with CON (565 ± 325 pg/mL × 270 min; p < 0.047). Glucose concentrations were higher after WBH compared with LBH and CON (p < 0.046). Femoral artery blood flow was higher at the end of WBH (1713 ± 409 mL/min) compared with LBH (943 ± 349 mL/min; p < 0.001), and higher in LBH than CON (661 ± 222 mL/min; p = 0.002). Affect and thermal comfort were more negative during WBH compared with LBH and CON (p < 0.010). In conclusion, local passive heating elevated blood flow and the IL-6 iAUC. However, while resulting in more positive perceptual responses, the majority of the included cardiometabolic markers were attenuated compared with WBH. Novelty: The increase in the IL-6 iAUC in response to passive heating is not reduced by upper-body cooling. Upper-body cooling attenuates the plasma nitrite, IL-1ra and femoral artery blood flow response to passive heating. Upper-body cooling leads to more positive perceptual responses to passive heating.

Form-Stable Solar Thermal Heat Packs Prepared by Impregnating Phase-Changing Materials within Carbon-Coated Copper Foams.

The heat packs that are based on solid-liquid transition of phase-changing materials (PCMs) have been pursued as a promising way to provide heating for human body comfort and thermotherapy owning to their large heat storage capacity and near-constant heat-release temperature. Current heat packs, however, suffer from leakage, slow charging, and poor heat-release performance due to the flow of liquid PCMs and their low thermal conductivity. Here, we report a strategy for preparing high-performance PCM-based solar thermal heat packs through impregnating organic PCMs within carbon-coated copper foams (CCFs). The porous structure and hydrophobic surface of CCF help to effectively confine the melted liquid PCM within the composite heat pack without leakage. The carbon coating layer efficiently converts the incident solar light into heat, which is rapidly transferred along the three-dimensional thermal conductive network of CCF and stored within the PCM. In the discharging process, the CCF network facilitates the extraction of the heat stored within the PCM. In contrast to neat PCM pack within which only a small portion of PCM that is in contact with human skin contributes to thermal comfort, all PCMs within the CCF-based composite heat pack concertedly release the stored heat. Such release significantly increases the extractable thermal energy and prolongs the usable healing duration for thermotherapy.

Design and development of nEMoS, an all-in-one, low-cost, web-connected and 3D-printed device for environmental analysis.

The Indoor Environmental Quality (IEQ) refers to the quality of the environment in relation to the health and well-being of the occupants. It is a holistic concept, which considers several categories, each related to a specific environmental parameter. This article describes a low-cost and open-source hardware architecture able to detect the indoor variables necessary for the IEQ calculation as an alternative to the traditional hardware used for this purpose. The system consists of some sensors and an Arduino board. One of the key strengths of Arduino is the possibility it affords of loading the script into the board's memory and letting it run without interfacing with computers, thus granting complete independence, portability and accuracy. Recent works have demonstrated that the cost of scientific equipment can be reduced by applying open-source principles to their design using a combination of the Arduino platform and a 3D printer. The evolution of the 3D printer has provided a new means of open design capable of accelerating self-directed development. The proposed nano Environmental Monitoring System (nEMoS) instrument is shown to have good reliability and it provides the foundation for a more critical approach to the use of professional sensors as well as for conceiving new scenarios and potential applications.