Nanostructured Lipid Carriers Can Enhance Oral Absorption of Khellin, a Natural Pleiotropic Molecule.

A novel formulation based on nanostructured lipid carriers (NLCs) was developed to increase solubility and intestinal absorption of khellin. K-NLCs were prepared with stearic acid, hempseed oil, Brij S20, and Labrafil M 1944 CS, using the emulsification-ultrasonication method. Developed nanoparticles were chemically and physically characterized by liquid chromatography, light scattering techniques, and electron microscopy. The size, about 200 nm, was optimal for oral delivery, and the polydispersity index (around 0.26), indicated high sample homogeneity. Additionally, K-NLCs showed a spherical morphology without aggregation by microscopic analysis. The encapsulation efficiency of khellin was about 55%. In vitro release studies were carried out in media with different pH to mimic physiological conditions. K-NLCs were found to be physically stable in the simulated gastric and intestinal fluids, and they preserved about 70% of khellin after 6 h incubation. K-NLCs were also successfully lyophilized testing different lyoprotectants, and obtained freeze-dried K-NLCs demonstrated good shelf life over a month. Lastly, permeability studies on Caco-2 cells were performed to predict khellin passive diffusion across the intestinal epithelium, demonstrating that nanoparticles increased khellin permeability by more than two orders of magnitude. Accordingly, developed NLCs loaded with khellin represent a versatile formulation with good biopharmaceutical properties for oral administration, possibly enhancing khellin's bioavailability and therapeutic effects.

Magnetic solid-phase extraction of high molecular weight peptides using stearic acid-functionalized magnetic hydroxyapatite nanocomposite: determination of some hypothalamic agents in biological samples.

Therapeutic peptides have an important effect on physiological function and human health, so it is momentous to quantify and detect low levels of these biomolecules in biological samples for treatment and diagnostic purposes. In the present study, an efficient magnetic solid-phase extraction (MSPE) method was developed based on stearic acid-functionalized magnetic hydroxyapatite nanocomposite (MHAP/SA) as a novel and cost-effective adsorbent for extraction of five hypothalamic-related peptides (goserelin, octreotide, triptorelin, somatostatin, and cetrorelix) from biological samples. To characterize the morphology and physicochemical properties of MHAP/SA, Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDS), field emission scanning microscopy (FE-SEM), CHNS elemental analysis, Brunauer-Emmett-Teller (BET), and vibrating sample magnetometry (VSM) were applied. Under optimum conditions, the proposed method (MSPE-HPLC-UV) represented favorable linearity with R2 ≥ 0.9987, suitable intra- and inter-day precisions (RSD ≤ 6.9% and RSD ≤ 8.1%, respectively, n = 3), and limits of detection and quantification in the range of 0.75-1.12 ng mL-1 and 2.50-3.75 ng mL-1, respectively. Eventually, the proposed method was used for the extraction and quantification of target therapeutic peptides in plasma and urine samples, and satisfactory relative recoveries were achieved in the range of 90.6-110.3%.

Effect of cellulose and starch fatty acid esters addition on microstructure and physical properties of arabinoxylan films.

Arabinoxylan (AX) and cellulose were extracted from wheat straw, whereas starch was extracted from potato peel. Thereafter, cellulose and starch were esterified with lauric, myristic, palmitic and stearic acids to prepare corresponding cellulose (CFAs) and starch fatty acid esters (SFAs) with DS 2.1-2.8. XRD study revealed remarkable loss of crystallinity in cellulose and starch due to fatty acid esterification. The addition of palmitate and stearate esters of cellulose and starch to AX formed laminar film microstructures which limited water vapor permeability whereas films prepared by blending AX with laurate and myristate esters of starch and cellulose were less effective as water vapor barrier due to their non-layer microstructures. The laminar structures also resulted significant reduction in mechanical strength of the composite films. Furthermore, all AX-CFAs and AX-SFAs films were thermally more stable than native composite films. These films might be used to produce industrially useful coating material for food products.

Development and Physicochemical Properties of Low Saturation Alternative Fat for Whipping Cream.

We developed an alternative whipping cream fat using shea butter but with low saturation. Enriched stearic-oleic-stearic (SOS) solid fat was obtained from shea butter via solvent fractionation. Acyl migration reactant, which mainly contains asymmetric SSO triacylglycerol (TAG), was prepared through enzymatic acyl migration to obtain the creaming quality derived from the ß'-crystal form. Through enzymatic acyl migration, we obtained a 3.4-fold higher content of saturated-saturated-unsaturated (SSU) TAG than saturated-unsaturated-saturated (SUS) TAG. The acyl migration reactant was refined to obtain refined acyl migration reactant (RAMR). An alternative fat product was prepared by blending RAMR and hydrogenated palm kernel oil (HPKO) at a ratio of 4:6 (w/w). The melting points, solid fat index (SFI), and melting curves of the alternative products were similar to those of commercial whipping cream fat. The alternative fat had a content of total unsaturated fatty acids 20% higher than that of HPKO. The atherogenic index (AI) of alternative fat was 3.61, much lower than those of whipping cream fat (14.59) and HPKO (1220.3), because of its low atherogenic fatty acid content and high total unsaturated fatty acids. The polymorphic crystal form determined by X-ray diffraction spectroscopy showed that the ß'-crystal form was predominant. Therefore, the alternative fat is comparable with whipping cream that requires creaming quality, and has a reduced saturated fat content.

Assessment of Concentrated Liquid Coffee Acceptance during Storage: Sensory and Physicochemical Perspective.

Concentrated liquid coffees (CLCs) refer to stored extracts stable at environmental temperature, used as ingredients in the retail market. Their low chemical stability affects the sensory profile. This study was performed in two CLCs, one without additives (BIB) and another with a mix of sodium benzoate and potassium sorbate additives (SD), stored at 25 °C for one year. Quantitative-Descriptive (QDA) and discriminant analyses permitted identifying the critical sensory attributes and their evolution over time. The concentrate without additives presented an acceptance limit of 196 days (evaluated at a 50% acceptance ratio), while the additives increased the shelf life up to 226 days (38.9% improvement). The rejection was related to a decreased aroma, increased acidity, and reduced bitterness. A bootstrapped feature selection version of Partial Least Square analysis further demonstrated that reactions of 5-caffeoylquinic acid (5CQA) and 3,5-dicaffeoylquinic acid (3,5diCQA) could cause changes in the aroma at the first degradation stage. In the following stages, changes in fructose and stearic acid contents, a key indicator of acceptance for both extracts possibly related to non-enzymatic reactions involving fructose and other compounds, might affect the bitterness and acidity. These results provided valuable information to understand flavor degradation in CLCs.

Chemical Composition Analysis Using HPLC-UV/GC-MS and Inhibitory Activity of Different Nigella sativa Fractions on Pancreatic α-Amylase and Intestinal Glucose Absorption.

Nigella sativa (NS) is a well-known plant for its various benefits and multiuse in traditional medicine. This study is aimed at investigating the chemical composition of the different NS fractions by using GC-MS for the esterified fatty acids or HPLC-UV for organic fraction and at evaluating the inhibitory effect on pancreatic α-amylase (in vitro, in vivo) and intestinal glucose absorption. Among all the investigated fractions, it was shown that they are rich with different molecules of great interest. The n-hexane fraction was characterized by the presence of linoleic acid (44.65%), palmitic acid (16.32%), stearic acid (14.60%), and thymoquinone (8.7%), while among the identified peaks in EtOH fraction we found catechin (89.03 mg/100 g DW), rutin (6.46 mg/100 g DW), and kaempferol (0.032 mg/100 g DW). The MeOH fraction was distinguished with the presence of gallic acid (19.91 mg/100 g DW), catechin (13.79 mg/100 g DW), and rutin (21.07 mg/100 g DW). Finally, the aqueous fraction was marked by the existence of different molecules; among them, we mention salicylic acid (32.26 mg/100 g DW), rutin (21.46 mg/100 g DW), and vanillic acid (3.81 mg/100 g DW). Concerning the inhibitory effect on pancreatic α-amylase, it was found that in the in vitro study, the best IC50 registered were those of EtOH (0.25 mg/ml), MeOH (0.10 mg/ml), aqueous (0.031 mg/ml), and n-hexane fraction (0.76 mg/ml), while in the in vivo study an important inhibition of α-amylase in normal and diabetic rats was observed. Finally, the percentage of intestinal glucose absorption was evaluated for all tested extracts and it was ranging from 24.82 to 60.12%. The results of the present study showed that the NS seed fractions exert an interesting inhibitory effect of α-amylase and intestinal glucose absorption activity which could be associated with the existent bioactive compounds. Indeed, these compounds can be used as antidiabetic agents because of their nontoxic effect and high efficacy.

Stearic acid esterified pectin: Preparation, characterization, and application in edible hydrophobic pectin/chitosan composite films.

This work investigated the modification of low-methoxy pectin with stearic anhydride through microwave action with 4-dimethylaminopyridine as catalyst. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses indicated that stearic acid was grafted on the pectin through esterification reaction, with the maximum stearic acid grafting ratio (SGR) of 10.7% for the modified pectin. The introduction of stearic acid was shown to significantly improve the emulsifying activity and stability of pectin. Composite films were prepared by blending the modified pectins and chitosan, and compared with the contact angle of 65.3° for the film with native low-methoxy pectin (PC0), the films with modified pectins showed a significant angle increase, with the highest contact angle reaching 101.9°, indicating a hydrophobic surface. Moreover, an appropriate amount of aliphatic chains could improve the tensile strength and elongation at break of the composite films due to the "anchoring effect".

Characterization of functional chocolate formulated using oleogels derived from ß-sitosterol with γ-oryzanol/lecithin/stearic acid.

With an aim to prepare the functional chocolate, corn oil was used as the base oil and ß-sitosterol was combined with oryzanol/stearic acid/lecithin to prepare respective oleogels (GO, SO, and LO). Oleogels (12%) were prepared by adding compound oleogelators at different ratios [GO-2:3, SO-1:4, and LO-4:1 (w/w)] in corn oil. The microstructure, interaction, thermodynamic, crystalline, and rheological behavior of formulated oleogels were studied by microscopic observation, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and rotational rheometer, respectively. The results showed that GO had the strongest gel forming ability and the densest gel crystallization network. Moreover, chocolate prepared with GO (cocoa butter and oleogels-1:1) had the similar texture, crystal structure, rheological, and sensory properties to that of dark chocolate. This study provides the possibility for the wider application of oleogel prepared with lower saturated and trans-fatty acids in the chocolate industry.

Contrastive analysis of lipid composition and thermal and crystallization behavior of olein/stearin fractionated by novel layer melt crystallization from palm oil.

BACKGROUND: Melt crystallization is typically recognized as a highly efficient and green method for oil fractionation. This work concentrated on novel layer melt crystallization for preparing desirable olein and stearin products from palm oil and the evaluation of fraction quality. Layer melt crystallization was performed at various temperatures and the effects on fractions were evaluated using iodine value (IV), solid fat content (SFC) and melting point. The lipid composition, thermal and crystallization properties, and phase behaviors of the final optimized fractions were determined using gas chromatography, high-performance liquid chromatography-atmospheric pressure chemical ionization mass spectrometry and differential scanning calorimetry. RESULTS: Increasing crystallization tube temperatures under the same jacket temperature increased the melting point and SFC, while decreasing the IV of the olein product. Opposite results were observed for the stearin product. Major fatty acids in fractions were determined as palmitic acid and oleic acid. 1,2-Dioleoyl-3-palmitoylglycerol and 1,3-dipalmitoyl-2-oleoylglycerol were identified as the main triacylglycerols in olein and stearin fractions, respectively. A critical effect of crystallization temperature on co-crystallization of oleins and stearins was revealed. A transition from plate-like crystal growth to spherulitic growth with spontaneous nucleation was indicated in palm oil and stearin fractions with increasing crystallization temperature. As for olein fractions, a temperature increase resulted in heterogeneous nucleation from instantaneous nucleation. CONCLUSIONS: Novel layer melt crystallization was successfully applied and optimized for fractionating palm oil. The composition and property changes of obtained fractions were analyzed and explained at both macroscopic and microscopic levels. © 2021 Society of Chemical Industry.

Physicochemical properties of heat-moisture treated, stearic acid complexed starch: The effect of complexation time and temperature.

Starch modification has been extensively studied to alter its physicochemical properties based on human needs. Lowering the digestion rate of starch is one of the interests in food science research, since when it is nutritionally improved, it can reduce the risk of human chronic diseases. In this study, heat-moisture treatment (HMT) followed by inclusion complexation with stearic acid at various temperatures and times was applied to improve the functional properties of starch. Thermal analysis suggested the formation of type I and type II complexes after complexation at 90 °C, indicated by a endothermal peak at 107 and 122 °C, respectively, while native starch after complexation only resulted in type I complexes. The formation of crystalline complexes was also confirmed by XRD showing peaks at 2θ = 13.1° and 20.1°. Furthermore, the modified starch displayed a higher pasting temperature, considerably less swelling and significantly lower viscosity behavior. This implied that the starch granules were thermally and mechanically more stable. The granular appearance of the modified starch was confirmed with light microscopy that presented more intact granules and less ruptured granules, even after heating to 90 °C. This study offers a way to upgrade the nutritional properties of starch.

Modification of palm-based oil blend via interesterification: Physicochemical properties, crystallization behaviors and oxidative stabilities.

Interesterification is widely employed as an effective technique to modify oils and fats. This study utilizes palm-based oil (palm olein: palm kernel oil: palm stearin, 5:3:2, w/w/w) as the raw material for the interesterification process performed in a pilot-scale packed bed reactor. Enzymatic interesterification (EIE) was catalyzed by Lipozyme TL IM (813.0 g) at 60℃ with reaction flow rate of 100 mL/min. Chemical interesterification (CIE) was catalyzed using sodium methoxide (0.3 wt%) as catalyst at 105 °C for 30 min. The results showed that the EIE fats had lower solid fat content tendency compared to that of CIE fats. The crystallization onset temperature was higher in EIE fats (23.09℃) compared to that of CIE (19.08℃). The results were consistent with the crystallization kinetics whereby the Avrami K constants of EIE fats were higher than that of CIE fats at various temperatures, indicating rapid crystallization and instant nucleation. Linear growth mechanism was dominant and the crystals formed were smaller in size as observed using polarized light microscope. The interesterified fats exhibited the presence of ß and ß'-crystals. While most of the tocopherol content was retained after EIE (386.18 ug/g), the molecular distillation process reduced the tocopherol concentration (110.01 ug/g) which consequently affected the oxidative stability. The findings in this work contribute to the fundamental understanding on the differences between CIE and EIE fats and provides data to support the preparation of modified fats via EIE that shows great potential as a controllable technique for industrialization.

Rhizomucor miehei lipase-catalysed synthesis of cocoa butter equivalent from palm mid-fraction and stearic acid: Characteristics and feasibility as cocoa butter alternative.

In this study, cocoa butter equivalents (CBEs) were prepared through enzymatic interesterification of palm mid-fraction (PMF) with stearic acid (SA). The reaction process parameters were experimented and the performance of the product was analysed. PMF and stearic acid (at a mass ratio of 1:2) were catalysed by 80 g kg-1 enzyme loading of Lipozyme RM IM fromRhizomucor mieheiat 60 °C for 120 min. The yield of the CBE product was more than 92%, and the CBE resembled cocoa butter (CB) in terms of its triacylglycerol composition. The hardness of the CBE product was higher than that of CB at different storage temperatures, but this difference was not obvious at 25 °C. The polymorphic structures and SFC curve of the CBE were similar to those of the CB. In addition, the CBE could be mixed with CB in any ratio without an obvious eutectic phenomena. Up to 40% CBE could be added to CB without significantly affecting the thermodynamic properties of CB. Thus, replacing CB with the CBE product is feasible.

Discovery and Engineering of a Novel Baeyer-Villiger Monooxygenase with High Normal Regioselectivity.

Baeyer-Villiger monooxygenases (BVMOs) are remarkable biocatalysts for the Baeyer-Villiger oxidation of ketones to generate esters or lactones. The regioselectivity of BVMOs is essential for determining the ratio of the two regioisomeric products ("normal" and "abnormal") when catalyzing asymmetric ketone substrates. Starting from a known normal-preferring BVMO sequence from Pseudomonas putida KT2440 (PpBVMO), a novel BVMO from Gordonia sihwensis (GsBVMO) with higher normal regioselectivity (up to 97/3) was identified. Furthermore, protein engineering increased the specificity constant (kcat /KM ) 8.9-fold to 484 s-1 mM-1 for 10-ketostearic acid derived from oleic acid. Consequently, by using the variant GsBVMOC308L as an efficient biocatalyst, 10-ketostearic acid was efficiently transformed into 9-(nonanoyloxy)nonanoic acid, with a space-time yield of 60.5 g L-1 d-1 . This study showed that the mutant with higher regioselectivity and catalytic efficiency could be applied to prepare medium-chain ω-hydroxy fatty acids through biotransformation of long-chain aliphatic keto acids derived from renewable plant oils.

Hepatic targeting of glycyrrhetinic acid via nanomicelles based on stearic acid-modified fenugreek gum.

This study aimed to increase the solubility of glycyrrhetinic acid (GA) in water and enhance its liver-targeting ability using self-assembling nanomicelles (NMs) based on stearic acid-modified fenugreek gum (FG-C18). The GA/FG-C18 NMs were prepared by an ultrasonication dispersion method. The nanomicelles were spherical particles with a particle size of 198.61 ± 1.58 nm and a zeta potential of -30.12 ± 0.28 mV. The drug loading and encapsulation efficiency were 13.34 ± 0.24% and 80.07 ± 1.44%, respectively. The results of differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD) indicated that GA was successfully encapsulated into the nanomicelles in a molecularly dispersed state. An in vitro release test showed that GA/FG-C18 NMs possessed a slow drug release profile in PBS (pH 7.4) over 200 h. The cytotoxicity assay indicated that GA/FG-C18 NMs showed much higher inhibitory efficacy in HepG2 cells than in MCF-7 cells. Tissue section studies indicated that the accumulation of DiR-loaded FG-C18 nanomicelles in the liver of mice was higher than that of the DiR solution, and the fluorescence intensity decreased over time. GA/FG-C18 NMs showed a larger area under the curve (AUC) and mean residence time (MRT) compared with free GA after intravenous administration in mice. The in vivo studies showed that GA mainly accumulated in the liver after encapsulation by FG-C18 NMs, and the drug concentration was higher than that of free GA. These results suggested that FG-C18 NMs could serve as a potential drug delivery system for targeting GA to liver tissue.

Physical characterization of fatty acid supplements with varying enrichments of palmitic and stearic acid by differential scanning calorimetry.

Saturated fatty acid supplements commonly fed to dairy cows differ in their fatty acid (FA) profile. Some supplements with very high enrichments of palmitic acid (PA) or stearic acid (SA) have been reported to have low total-tract digestibility. Saturated FA have the potential to form crystalline structures at high purity that may affect digestibility. Differential scanning calorimetry (DSC) is a thermal technique commonly used in materials science to measure the change in heat flow as energy is absorbed or released from a sample during heating, and it was used to characterize a series of experimental and commercial fat supplements. Our hypothesis was that products with very high enrichment of either PA or SA would differ in thermal characteristics compared with those that include moderate levels of a second FA because of the formation of secondary crystalline structures, which may contribute to decreased digestibility. First, replicated runs demonstrated low variation in melting temperature (MT) and enthalpy (coefficient of variation <4%). The effect of physical form was evaluated by comparing an initial thermal cycle to a second, successive thermal cycle after samples had resolidified in the test pan. Melting temperature was slightly increased by 1.3°C by the second cycle compared with the first, but there was no change in enthalpy. Next, supplements with 98% SA, 98% PA, and an SA/PA (44%/55%) blend with undetectable levels of unsaturated FA were compared. Melting temperature of the SA/PA mixture was 61.2°C and similar to the expected MT of PA (62.9°C). However, the MT of the high-purity SA and PA were increased to 73.7°C and 67.8°C, respectively, and enthalpy increased by 12.5% compared with the SA/PA blend. An FA stock highly enriched in SA (>98%) had the highest MT, and one moderately enriched in PA (∼85%) that contained 10.1% unsaturated FA had the lowest enthalpy value of all FA supplements and experimental stocks that were characterized. Differential scanning calorimetry may be useful to screen and design supplements with improved physical properties that may be associated with digestibility.

Amylose-lipid complex formation from extruded maize starch mixed with fatty acids.

Functional modifications of starch, such as paste properties, retrogradation, water absorption indexes, solubility, and swelling capacity, are induced by the amylose-lipid complex. This research comprehends the study of functional properties of extruded maize starch mixed with fatty acids (stearic acid, oleic acid, and maize oil) and the formation of amylose-lipid complexes. Maize starch with lipids (5 or 10 %), moisture (35 %) was extruded (single screw). Starch granule was modified by extrusion, to a lesser extent at 10 % of lipids, especially stearic acid, which covers starch granule surface. Viscosity decreased meaningfully with stearic acid addition. DSC showed both starch gelatinization enthalpy and amylose-lipid complex enthalpy for stearic or oleic acid, but it was just the first enthalpy for maize oil. X-ray diffraction showed orthorhombic crystals with or without the presence of lipids. Our results indicated that stearic acid yielded the highest amount of amylose-lipid complexes.

Cedrus deodara (Bark) Essential Oil Induces Apoptosis in Human Colon Cancer Cells by Inhibiting Nuclear Factor kappa B.

AIMS: The aim of this study is to explore essential oil from the bark of Cedrus deodara (CDEO) as an potential anticancer agent. BACKGROUND: The frontline drugs against cancer in clinical settings are posing challenges of resistance and other detrimental side-effects. This has led to the exploration of new anticancer chemical entities from natural sources, particularly plant-based products such as essential oils that serve as vast repositories of pharmacologically active substances for combating cancer. OBJECTIVE: The objective is to isolate and characterize the essential oil from the bark of Cedrus deodara (CDEO) and evaluate its potential as an anticancer agent and delineate the possible underlying mechanism of action. METHODS: Cedrus deodara essential oil from bark (CDEO) was obtained by hydro-distillation and analyzed by GC/MS for vital constituents. Further, in vitro cytotoxic potential was measured by MTT assay against a panel of cancer cell lines. The apoptosis-inducing potential of CDEO was analyzed by mitochondrial membrane potential loss (ΔΨm) and nuclear fragmentation assay. Besides, wound healing assay and colonogenic assay were employed to check the anti-metastatic potential of CDEO. Molecular docking approaches were employed for target identification, while immuno-blotting was carried out for target validation. RESULTS AND DISCUSSION: The major components identified were 2-(tert-Buyl)-6-methyl-3-(2- (trifluoromethyl) benzyl)imidazo [1,2-a]pyridine (26.32 %);9- Octadecenoic acid (8.015 %); Copaene (5.181 %);2-(4-Methoxy-2,6-dimethylphenyl) -3-methyl-2H- benzo[g]indazole(4.36 %) and 9(E),11(E)- Conjugated linoleic acid (4.299 %). Further, potent in vitro cytotoxic activity with IC50 values of 11.88 µg/ ml and 14.63 µg/ ml in colon cancer cell lines of HCT-116 and SW-620, respectively. Further, a significant and dose-dependent decrease in colony formation, cell migration, induction of ROS formation and loss in ΔΨm was observed. Additionally, major compounds identified were chosen for ligandprotein binding interaction studies to predict the molecular targets in colon cancer. It was observed that compounds such as 9-Octadecenoic acid;4H-1- Benzopyran-4-one, 3-(3,4-dimethoxyphenyl)-6,7- dimethoxy; 2-(4-Methoxy-2,6-dimethylphenyl) -3-methyl-2H-benzo [g]indazole and 2-Bornanol,5-(2,4- dinitro phenyl) hydrazono have a prominent binding affinity with NF-κB. This was also further validated by immuno-blotting results wherein CDEO treatment in colon cancer cells led to the abrogation of NFκB, and the Bcl-2-associated X protein (Bax): B-cell lymphoma (Bcl)-2 ratio was up-regulated leading to enhanced cleaved caspase 3 formation and subsequent apoptosis. CONCLUSION: These results unveil CDEO inhibits cell proliferation and induces apoptosis in colon cancer cells, which can be attributed to the abrogation of the NFκB signaling pathway.

Potential Pickering emulsion stabilized with chitosan-stearic acid nanogels incorporating clove essential oil to produce fish-oil-enriched mayonnaise.

The aim of this study was to introduce Pickering emulsions stabilized by chitosan (CS)-stearic acid (SA) nanogels incoporating clove essential oil (CEO) as a new way to enrich mayonnaise with fish oil. Firstly, fish oil-in-water Pickering emulsion was prepared, which the most stability of emulsion was achived at 2 % (w/w) CS-SA nanogels and 60 % (w/w) fish oil. Then, the fish oil-in-water Pickering emulsions stabilized with 2 % CS-SA nanogels as well as 2 % CS-SA nanogels incorporating CEO were used in formulation of mayonnaise. The results showed that the use of fish oil in the form of emulsion stabilized with CS-SA nanogels increased the oxidative stability of mayonnaise. Moreover, rheological studies indicated that the use of CS-SA nanogels could increase the elasticity of mayonnaise, which higher elasticity was observed about mayonnaise containing CS-SA nanogels incorporating CEO. Overall, CS-SA nanogels incorporating CEO can be used for increasing gel-like structure of the fish-oil-enriched mayonnaise.

Effect of Blanching Pomegranate Seeds on Physicochemical Attributes, Bioactive Compounds and Antioxidant Activity of Extracted Oil.

This study investigated the effect of blanching pomegranate seeds (PS) on oil yield, refractive index (RI), yellowness index (YI), conjugated dienes (K232), conjugated trienes (K270), total carotenoid content (TCC), total phenolic compounds (TPC) and DPPH radical scavenging of the extracted oil. Furthermore, phytosterol and fatty acid compositions of the oil extracted under optimum blanching conditions were compared with those from the oil extracted from unblanched PS. Three different blanching temperature levels (80, 90, and 100 °C) were studied at a constant blanching time of 3 min. The blanching time was then increased to 5 min at the established optimum blanching temperature (90 °C). Blanching PS increased oil yield, K232, K270, stigmasterol, punicic acid, TPC and DPPH radical scavenging, whereas YI, ß-sitosterol, palmitic acid and linoleic acid were decreased. The RI, TCC, brassicasterol, stearic acid, oleic acid and arachidic acid of the extracted oil were not significantly (p > 0.05) affected by blanching. Blanching PS at 90 °C for 3 to 5 min was associated with oil yield, TPC and DPPH. Blanching PS at 90 °C for 3 to 5 min will not only increase oil yield but could also improve functional properties such as antioxidant activity, which are desirable in the cosmetic, pharmaceutical, nutraceutical and food industries.

Preparation and characterization of C-phycocyanin coated with STMP/STPP cross-linked starches from different botanical sources.

This work aimed to use sodium trimetaphosphate/sodium tripolyphosphate cross-linked potato, banana, corn, cassava, and breadfruit starches as wall materials for C-phycocyanin encapsulation, characterize them and evaluate their in vivo pharmacological effects in an inflammation model. The cross-linked starches were successfully obtained, characterized, and submitted to C-phycocyanin encapsulation by freeze-drying. The characterization of cross-linked starches-C-phycocyanin composites by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetry, and differential scanning calorimetry demonstrated that the C-phycocyanin was encapsulated between amorphous chains of cross-linked starches. Among the five preparations, the cross-linked potato starch presented the highest phosphorous content (0.084%), substitution degree (0.004), water uptake capacity (0.88 g g-1), and C-phycocyanin encapsulation efficiency (67.58%), thus was tested in vivo. The cross-linked potato starch-C-phycocyanin prolonged the antihyperalgesic effects attributed to C-phycocyanin, evaluated by complete Freund's adjuvant (CFA) model. Starch cross-linking promoted the formation of a hydrogel network in swollen state entrapping C-phycocyanin, thus, acting as a barrier to its release to the medium and promoting long-lasting in vivo effects. The combination of chemical modification of starches followed by physical treatment presented itself as a useful tool for the development of pharmaceutical formulations.