Coffee Beverage: A New Strategy for the Synthesis of Polymethacrylates via ATRP.

Coffee, the most popular beverage in the 21st century society, was tested as a reaction environment for activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) without an additional reducing agent. Two blends were selected: pure Arabica beans and a proportional blend of Arabica and Robusta beans. The use of the solution received from the mixture with Robusta obtained a high molecular weight polymer product in a short time while maintaining a controlled structure of the synthesized product. Various monomers with hydrophilic characteristics, i.e., 2-(dimethylamino)ethyl methacrylate (DMAEMA), oligo(ethylene glycol) methyl ether methacrylate (OEGMA500), and glycidyl methacrylate (GMA), were polymerized. The proposed concept was carried out at different concentrations of coffee grounds, followed by the determination of the molar concentration of caffeine in applied beverages using DPV and HPLC techniques.

Synthesis and characterization of thermo/pH-sensitive pectin-graft-poly(dimethylaminoethyl methacrylate) coated magnetic nanoparticles.

Herein, thermo- and pH-sensitive pectin-graft-poly(dimethylaminoethyl methacrylate) copolymer-coated magnetic nanoparticles were synthesized via a green and rapid synthetic approach based on microwave irradiation. Firstly, a novel thermo- and pH-sensitive pectin-graft-poly(dimethylaminoethyl methacrylate) copolymer (Pec-g-PolyDMAEMA) was synthesized and then, Pec-g-PolyDMAEMA based magnetic nanoparticles (Pec-g-PolyDMAEMA@Fe3O4) were produced via microwave-assisted co-precipitation method. The thermo/pH/magnetic field multi-sensitive hybrid nanoparticle was characterized by techniques like TEM, VSM, FT-IR, and TGA/DSC. In vitro release studies of 5-Fluorouracil (FL) were carried out by altering the temperature (37 and 44°C), pH (5.5 and 7.4) and presence of an AMF. The FL release of Pec-g-PolyDMAEMA@Fe3O4@FL exhibited pH-sensitive behavior. They showed thermo/pH-sensitive FL release features with the greatest release of FL at 37°C (56%) than at 44°C (40%) and at pH of 7.4 (63%) than at pH of 5.5 (45%) within 48h. The FL release was also significantly increased (100%) with the presence of a 50 mT magnetic field. These results indicate that the developed Pec-g-PolyDMAEMA@Fe3O4 nanoparticles are promising in the application of multi-stimuli-sensitive delivery of drugs.

Preparation of Poly(glycidyl methacrylate) (PGMA) and Amine Modified PGMA Adsorbents for Purification of Glucosinolates from Cruciferous Plants.

Glucosinolates (GLs) are of great interest for their potential as antioxidant and anticancer compounds. In this study, macroporous crosslinked copolymer adsorbents of poly (glycidyl methacrylate) (PGMA) and its amine (ethylenediamine, diethylamine, triethylamine)-modified derivatives were prepared and used to purify the GLS glucoerucin in a crude extract obtained from a cruciferous plant. These four adsorbents were evaluated by comparing their adsorption/desorption and decolorization performance for the purification of glucoerucin from crude plant extracts. According to the results, the strongly basic triethylamine modified PGMA (PGMA-III) adsorbent showed the best adsorption and desorption capacity of glucoerucin, and its adsorption data was a good fit to the Freundlich isotherm model and pseudo-second-order kinetics; the PGMA adsorbent gave the optimum decolorization performance. Furthermore, dynamic adsorption/desorption experiments were carried out to optimize the purification process. Two glass columns were serially connected and respectively wet-packed with PGMA and PGMA-III adsorbents so that glucoerucin could be decolorized and isolated from crude extracts in one process. Compared with KCl solution, aqueous ammonia was a preferable desorption solvent for the purification of glucoerucin and overcame the challenges of desalination efficiency, residual methanol and high operation costs. The results showed that after desorption with 10% aqueous ammonia, the purity of isolated glucoerucin was 74.39% with a recovery of 80.63%; after decolorization with PGMA adsorbent, the appearance of glucoerucin was improved and the purity increased by 11.30%. The process of using serially connected glass columns, wet-packed with PGMA and PGMA-III, may provide a simple, low-cost, and efficient method for the purification of GLs from cruciferous plants.

Zwitterionic PMCP-Modified Polycaprolactone Surface for Tissue Engineering: Antifouling, Cell Adhesion Promotion, and Osteogenic Differentiation Properties.

Biodegradable polycaprolactone (PCL) has been widely applied as a scaffold material in tissue engineering. However, the PCL surface is hydrophobic and adsorbs nonspecific proteins. Some traditional antifouling modifications using hydrophilic moieties have been successful but inhibit cell adhesion, which is not ideal for tissue engineering. The PCL surface is modified with bioinspired zwitterionic poly[2-(methacryloyloxy)ethyl choline phosphate] (PMCP) via surface-initiated atom transfer radical polymerization to improve cell adhesion through the unique interaction between choline phosphate (CP, on PMCP) and phosphate choline (PC, on cell membranes). The hydrophilicity of the PCL surface is significantly enhanced after surface modification. The PCL-PMCP surface reduces nonspecific protein adsorption (e.g., up to 91.7% for bovine serum albumin) due to the zwitterionic property of PMCP. The adhesion and proliferation of bone marrow mesenchymal stem cells on the modified surface is remarkably improved, and osteogenic differentiation signs are detected, even without adding any osteogenesis-inducing supplements. Moreover, the PCL-PMCP films are more stable at the early stage of degradation. Therefore, the PMCP-functionalized PCL surface promotes cell adhesion and osteogenic differentiation, with an antifouling background, and exhibits great potential in tissue engineering.

Bioinspired Polydopamine/Polyzwitterion Coatings for Underwater Anti-Oil and -Freezing Surfaces.

Zwitterionic polymers are continually suggested as promising alternatives to tune the surface/interface properties of materials in many fields because of their unique molecular structures. Tremendous efforts have been devoted to immobilizing zwitterionic polymers (polyzwitterions, PZIs) on the material surfaces. However, these efforts usually suffer from cumbersome and time-consuming procedures. Herein we report a one-step strategy to facilely achieve the bioinspired polydopamine/polyzwitterion (PDA/PZI) coatings on various substrates. It requires only 30 min to form PDA/PZI coatings by mixing oxidant, dopamine, and zwitterionic monomers, including carboxybetaine methacrylate (CBMA), sulfobetaine methacrylate (SBMA), and 2-methacryloxyethyl phosphorylcholine (MPC). These bioinspired coatings display multifunctional properties such as underwater antioil-adhesion and antifreezing thanks to their high hydrophilicity and underwater superoleophobicity. The coatings even show the antiadhesion property for crude oil with high viscosity. Therefore, the PDA/PZI-coated meshes are efficient for separating both light oil and crude oil from oil/water mixtures. All these results demonstrate that the one-step strategy is a facile approach to design and exploit the bioinspired PDA/PZI coatings for diverse applications.

Synthesis and characterization of molecularly imprinted polymer nanoparticles for coenzyme Q10 dispersive micro solid phase extraction.

Molecularly imprinted polymer nanoparticles (MIPNPs) with the ability to recognize coenzyme Q10 (CoQ10) were synthesised in order to be employed as sorbent in a dispersive micro-solid phase extraction (DMSPE) for the determination of CoQ10 in a liver extract. CoQ10 is a redox-active, lipophilic substance integrated in the mitochondrial respiratory chain which acts as an electron carrier, shuttling electrons from complex I (NADH-ubiquinone oxidoreductase) and II (succinate-ubiquinone oxidoreductase) to complex III (ubiquinol-cytochrome c reductase), for the production of cellular energy. The MIPNPs were synthesised by precipitation polymerization using coenzyme Q0 as the dummy template, methacrylic acid as the functional monomer, an acetonitrile: water mixture as the porogen, ethylene glycol dimethacrylate as the crosslinker and potassium persulfate as initiator. The nanoparticles were characterized by microscopy, capillary electrophoresis, dynamic light scattering, N2 adsorption-desorption isotherms, and infrared spectroscopy. The MIPNPs demonstrated the presence of selective cavities complementary to the quinone nucleus of CoQ10, leading to a specific recognition of CoQ10 compared with related compounds. In the liver extract the relative CoQ10 peak area (CoQ10 area/total peak area) increased from 4.6% to 25.4% after the DMSPE procedure. The recovery percentage of CoQ10 from the liver matrix was between 70.5% and 83.7% quantified against CoQ10 standard processed under the same conditions. The DMSPE procedure allows the elution of almost all the CoQ10 retained (99.4%) in a small volume (200µL), allowing the sample to be concentrated 2.5 times (LOD: 1.1µgg(-1) and LOQ: 3.7µgg(-1) of tissue). The resulted clean up of the sample, the improvement in peak shape and baseline and the reduction of interferences, evidence that the MIPNPs could potentially be applied as sorbent in a DMSPE with satisfactory results and with a minimum amount of sorbent (1mg).

Preparation and Evaluation of Diclofenac Sodium Tablet Coated with Polyelectrolyte Multilayer Film Using Hypromellose Acetate Succinate and Polymethacrylates for pH-Dependent, Modified Release Drug Delivery.

Polyelectrolyte multilayer (PEM) film formed due to the electrostatic interaction between oppositely charged polyelectrolytes is of considerable interest because of their potential applications as both drug carriers and surface-modifying agents. In this study, in vitro studies were carried out on polyelectrolyte complexes formulated with Eudragit E (EE) and hypromellose acetate succinate (HPMCAS). The complexes of EE and HPMCAS were formulated by non-stoichiometric method. The prepared IPCs were investigated using Fourier transform infrared spectroscopy. Diclofenac sodium (DS) tablets were prepared and were coated with polymer solution of HPMCAS and EE to achieve pH-dependent and sustained-release tablets. Tablets were evaluated for their physical characteristics and in vitro drug release. The results of pharmacokinetic studies in rabbits showed that the selected formulation (F6) exhibited a delayed peak plasma concentration and marked sustained-release effect of drug in the in vivo drug release in comparison with marketed tablet. The suitable combination of PEM film based on EE and HPMCAS demonstrated potential candidate for targeted release of DS in the lower part of the gastrointestinal (GI) tract.

Polymer prodrug nanoparticles based on naturally occurring isoprenoid for anticancer therapy.

The synthesis of a novel class of polymer prodrug nanoparticles with anticancer activity is reported by using squalene, a naturally occurring isoprenoid, as a building block by the reversible addition-fragmentation (RAFT) technique. The RAFT agent was functionalized by gemcitabine (Gem) as anticancer drug, and the polymerization of squalenyl-methacrylate (SqMA) led to well-defined macromolecular prodrugs comprising one Gem at the extremity of each polymer chain. The amphiphilic nature of the resulting Gem-PSqMA conjugates allowed them to self-assemble into long-term stable and narrowly dispersed nanoparticles with significant anticancer activity in vitro on various cancer cell lines. To confer stealth properties on these nanoparticles, their PEGylation was successfully performed, as confirmed by X-ray photoelectron spectroscopy (XPS) and complement activation assay. It was also shown that the PEGylated nanoparticles could be internalized in cancer cells to a greater extent than their non-PEGylated counterparts.

Oral insulin delivery using P(MAA-g-EG) hydrogels: effects of network morphology on insulin delivery characteristics.

Hydrogels of poly(methacrylic acid-g-ethylene glycol) were prepared using different reaction water contents in order to vary the network mesh size, swelling behavior and insulin loading/release kinetics. Gels prepared with greater reaction solvent contents swelled to a greater degree and had a larger network mesh size. All of the hydrogels were able to incorporate insulin and protected it from release in acidic media. At higher pH (7.4), the release rates increased with reaction solvent content. Using a closed loop animal model, all of the insulin loaded formulations produced significant insulin absorption in the upper small intestine combined with hypoglycemic effects. In these studies, bioavailabilities ranged from 4.6% to 7.2% and were dependent on reaction solvent content.

Design and evaluation of sustained release microspheres of potassium chloride prepared by Eudragit.

The aim of the present work was to prepare and evaluate the sustained release of potassium chloride formulations. Eudragit RS and/or RL loaded with potassium chloride microspheres were prepared by a solvent evaporation method. The effect of sustained release of Eudragit microspheres was evaluated by an in vitro dissolution test and in vivo oral absorption study, and the results were compared to a commercial product (Slow-K). The results showed that Eudragit microspheres loaded with potassium chloride can be easily prepared and satisfactory results obtained considering the size distribution and shapes of microspheres by incorporating aluminum stearate. The encapsulation efficiency and loading capacity were about 84-90% and 27%, respectively. Moreover, the Eudragit RS (30-45 mesh) and Eudragit RS/RL (20-30 mesh) microspheres showed a similar sustained release effect of commercial product via in vitro dissolution and in vivo oral absorption study.

Evaluation of solid dispersion particles prepared with SEDS.

Formation of solid solution particles in the Solution Enhanced Dispersion by Supercritical fluids (SEDS) process from a model drug and two different types of carriers, mannitol and Eudragit E100 was evaluated. The crystal properties of samples and molecular interactions were investigated with DSC and FTIR, respectively. The effect of co-crystallisation of drug and mannitol on dissolution rate was studied. Even if a true one-phase solid dispersion was not obtained, the crystal structure of both drug and mannitol was mutually affected by the presence of the other. The drug was not in highly crystalline form in the co-precipitates. The interactions between the drug and mannitol could also be identified as hydrogen bonding between the amine or hydroxyl groups of the drug and the hydroxyl groups of mannitol. These interactions and changes in the crystal structure are probably directly related to the increase in the dissolution rate observed. A true solid solution was obtained when the drug was co-processed with Eudragit E100. A clear interaction between the acid hydroxyl group of the drug and the basic carbonyl group on the Eudragit E100 was observed. SEDS was shown to be an effective process for forming intimate blends and solid solutions for the drug and two different types of carriers.

Enzymatic cleavage of disaccharide side groups in insoluble synthetic polymers: a new method for specific delivery of drugs to the colon.

A series of water-insoluble acrylic polymers containing disaccharide side groups were synthesized and evaluated in vitro. A cellobiose-derived monomer, 4-O-beta-D-glucopyranosyl-1-methacrylamido-1-deoxy-D-glucitol, was prepared and copolymerized with methacrylic acid. Two different modes of polymerization were used to give two products, P-1 and P-2. A homopolymer, P-3, was also synthesized using the same method as P-2. The degradation of the disaccharide side groups in these polymers and the monomer was evaluated by incubation with beta-glucosidase and measurement of the amount of glucose cleaved. It was found that the degradation rate increased in those polymers possessing lower contents of the disaccharide side groups (i.e. higher content of methacrylic acid). Scanning electron microscopy (SEM) observations of cross-sectioned slabs of P-1 visualized the degradation of the polymer. The enzymatic reaction caused a porous structure to be formed. The increased porosity may be used for the specific release of drugs into organs that contain large amounts of beta-glucosidases, such as the human colon.