Wind erosion control using alkali-activated slag cement: Experimental investigation and microstructural analysis.

This paper aims to mitigate wind erosion of soil by employing alkali-activated slag. Wind tunnel tests were conducted on soil samples treated with varying percentages of slag at different wind speeds (7, 14, 21, and 28 m/s) and under a sand bombardment condition. In the absence of saltating particles, the erodibility ratios of the alkali-activated slag-treated samples with weight percentages of 1%, 2%, 4%, and 6% to the untreated sample at the highest wind speed (i.e., 28 m/s) correspond to 0.19%, 0.10%, 0.08%, and 0.06%, respectively. Moreover, in the presence of saltating particle bombardment, these samples exhibited erodibility reductions of 98.5%, 98.8%, 99.4%, and 99.6% compared to the untreated sample. The strength of the formed crusts, determined by penetrometer tests, increased significantly for the treated samples, ranging from 1300 to 6500 times greater than the untreated sample. The complementary analysis using x-ray diffraction and field emission scanning electron microscopy revealed the formation of albite and anorthite crystals along with the formation of calcium aluminosilicate hydrate, sodium aluminosilicate hydrate, and calcium silicate hydrate gels in the cementation process. Overall, the study highlights the effectiveness of alkali-activated slag in forming strong crusts that provide substantial protection against wind erosion, resulting in a significant decrease in wind erodibility.

Modification of palm fiber with chitosan-AESO blend coating.

Natural fibers are available as an essential substitute for synthetic fiber in many applications. However, the sensitivity of Chinese Windmill Palm or Trachycarpus Fortune Fiber (TFF) to water causes low interfacial bonding between the matrix and the fiber and at the end reduces the mechanical properties of the composite product. Alkaline treatment improves mechanical properties and does not affect water absorption. Hence, additional treatment in the coating is required. This study uses alkaline treatment and coating modification using blended chitosan and Acrylated Epoxidized Soybean Oil (AESO). Blend coating between AESO and chitosan is performed to increase water absorption and mechanical properties. TFF water resistance improved significantly after the coating, with water absorption of the alkaline/blend coating-TFF of 3.98 % ± 0.52 and swell ability of 3.156 % ± 0.17. This indicated that blend coating had formed a cross-link of fiber and matrix after alkalization. Thus, the single fiber tensile strength increased due to the alkaline treatment, and water absorption decreased due to the coating. The combination of alkaline treatment and blend coating on TFF brings excellent properties, as shown by the increase in tensile strength in both single fiber test and composite.

Risk of heavy metals accumulation in soil and wheat grains with waste water irrigation under different NPK levels in alkaline calcareous soil.

A field study was conducted on the reuse of wastewater from Mardan city to evaluate its risk of contaminating soil and wheat grains at different NPK levels. Three irrigation sources i.e. waste water (WW), canal water (CW) and alternate waste + canal water (WW+CW) were applied to wheat (cv Atta Habib 2010) grown at 0, 50, 75 and 100% NPK levels of 120:90:60 kg N:P2O5:K2O ha-1 at Palatoo Research Farm, Amir Muhammad Khan Campus, Mardan during 2015.The results showed higher grain and biomass yields in WW irrigated plots as compared to CW at NPK levels up to 50% of recommending dose revealing supplementing nutrient requirements in deficient conditions. However, irrigation of WW at higher NPK levels especially at or beyond 75% of recommended dose tended to reduce the crop yield that could be associated with heavy metals toxicity and nutritional imbalances. The use of WW substantially increased AB-DTPA extractable Zn, Mn, Pb, Ni and Cd indicating a potential threat to soil contamination. Similarly, WW irrigated wheat had higher concentrations of these heavy metals as compared to CW which limits its use for production purposes without any remediation measures. The alternate use of CW and WW as revealed by its comparative lower contamination in soil and wheat than sole WW could be one of the possible solutions and may increase the time required for threshold soil contamination.

Impact of ocean warming and ocean acidification on asexual reproduction and statolith formation of the symbiotic jellyfish Cotylorhiza tuberculata.

Ocean acidification and warming are challenging marine organisms and ecosystems around the world. The synergetic effects of these two climate change stressors on jellyfish remain still understudied. Here, we examine the independent and combined effects of these two environmental variables on polyp population dynamics of the Mediterranean jellyfish Cotylorhiza tuberculata. An experiment was conducted to examine asexual reproduction by budding and strobilation considering current and ca. 2100 winter (Trial 1, 36 days) and summer (Trial 2, 36 days) conditions under the RCP8.5 (IPCC 2013). In Trial 1, a temperature of 18°C and two pH levels (current: 7.9 and, reduced: 7.7) were tested. Trial 2 considered two temperature levels 24°C and 30°C, under current and reduced acidification conditions (8.0 and 7.7, respectively). Ephyrae size and statolith formation of released ephyrae from polyps exposed to summer temperatures under both acidification treatment was also analyzed. Zooxanthellae density inside the polyps throughout the experiment was measured. C. tuberculata polyps could cope with the conditions mimicked in all experimental treatments and no significant effect of pH, temperature, or the combination of both variables on the abundance of polyps was observed. At 18°C, strobilation was reduced under high PCO2 conditions. Under summer treatments (24°C and 30°C), percentage strobilation was very low and several released ephyrae suffered malformations and reduced size, as a consequence of reduced pH and elevated temperatures, separately. The number of statoliths was not affected by pH or temperature, however, bigger statoliths were formed at elevated temperatures (30°C). Finally, zooxanthellae density was not affected by experimental conditions, even if, the duration of the experiment significantly affected symbiont concentration. Our results show that even though polyps of C. tuberculata would thrive the future worst scenario predicted for the Mediterranean Sea, their capacity to undergo a proper strobilation and to produce healthy ephyrae will be more vulnerable to climate induced environmental conditions, thereby affecting medusae recruitment and, therefore, population dynamics of the species.

Transesterification via Parametric Modelling and Optimization of Marula (Sclerocarya birrea) Seed Oil Methyl Ester Synthesis.

This study investigates Marula (Sclerocarya birrea) seed oil (SBSO) as a novel feedstock for biodiesel production through the transesterification process catalysed by heterogeneous bio-alkali derived from banana (Musa acuminata) peels. Response surface methodology (RSM) and artificial neural network (ANN) tools were used for the modelling and optimization of the process variables. The reaction process parameters considered were methanol/SBSO molar ratio, catalyst loading levels, reaction time and temperature. Central composite design (CCD) was espoused to generate 30 experimental conditions which were deployed in investigating the individual and synergetic effect of the process input variables on Sclerocarya birrea oil methyl ester (SBOME) yield. Appropriate statistical indices were adopted to investigate the predictive aptitude of the two models. Analysis shows that ANN model obtained for the transesterification process has a higher coefficient of determination (R2) of 0.9846 and lower absolute average deviation (AAD) of 0.07% compared to RSM model with R2 of 0.9482 and AAD of 0.12%. The process modelling outcome also confirmed ANN performance to be more precise than RSM. At methanol/SBSO ratio of 6:1, catalyst loading level of 2 wt%, process reaction time of 50 min and temperature of 55°C, the experimental maximum SBOME yield was observed to be 96.45 wt % following the ANN predicted yield of 96.45 wt % and RSM predicted yield of 96.65 wt % respectively. The analysed fuel properties of SBOME was found satisfactory within the biodiesel stipulated standard limit(s). The study establishes that SBSO is a good source for biodiesel production and its biodiesel methyl ester is a potential substitute for petroleum diesel and a bioenergy fuel.

Protective effects of Poria cocos and its components against cisplatin-induced intestinal injury.

ETHNOPHARMACOLOGICAL RELEVANCE: Poria cocos (Schw.) Wolf (Poria) is a well-known traditional medicinal fungus. It has been considered to possess spleen-invigorating (Jianpi) effects in traditional Chinese medicine, and is used clinically to treat spleen deficiency (Pixu) with symptoms of intestinal disorders such as diarrhea, indigestion, mucositis and weight loss. THE AIM OF THIS STUDY: To investigate the protective effects of Poria and its three component fractions (Water-soluble polysaccharides, WP; alkali-soluble polysaccharides, AP; triterpene acids, TA) on cisplatin-induced intestinal injury and explore the underlying mechanisms. MATERIALS AND METHODS: C57BL/6 mice were treated with Poria powder (PP), WP, AP and TA by oral gavage respectively for 13 days, and intraperitoneally injected with 10 mg/kg of cisplatin on day 10 to conduct a cisplatin-induced intestinal injury model. Pathological changes of ileum and colon were examined using H&E staining. The composition of gut microbiota and the alteration of host metabolites were characterized by 16S rDNA amplicon sequencing and UPLC-QTOF-MS/MS based untargeted metabolomics analysis. RESULTS: PP and WP attenuated the cisplatin-induced ileum and colon injury, and WP alleviated the weight loss and reversed the elevation of IL-2, IL-6 in serum. Both PP and WP could mitigate cisplatin-induced dysbiosis of gut microbiota, in particular PP and WP decreased the abundance of pathogenic bacteria including Proteobacteria, Cyanobacteria, Ruminococcaceae and Helicobacteraceae, while WP promoted the abundance of probiotics, such as Erysipelotrichaceae and Prevotellaceae. Moreover, WP attenuated the cisplatin-induced alteration of metabolic profiles. The levels of potential biomarkers, including xanthine, L-tyrosine, uridine, hypoxanthine, butyrylcarnitine, lysoPC (18:0), linoleic acid, (R)-3-hydroxybutyric acid, D-ribose, thiamine monophosphate, indolelactic acid and plamitic acid, showed significant correlations with intestinal flora. CONCLUSIONS: PP and WP possess protective effects against cisplatin-induced intestinal injury via potentially regulating the gut microbiota and metabolic profiles.

The role of alkali in sweet potato starch-Mesona chinensis Benth polysaccharide gels: Gelation, rheological and structural properties.

According to the Chinese traditional black jelly production process, a critical step to ensure the quality of jelly is to add alkali to it. In this study, the effects of sodium carbonate (Na2CO3) and sodium bicarbonate (NaHCO3) on the pasting, rheological, textural, and structural properties of sweet potato starch (SPS)-Mesona chinensis Benth polysaccharide (MCP) gels were evaluated. Adding Na2CO3 at low concentration reduced the final viscosity (FV) of SPS-MCP gels, whereas adding it at a high concentration increased the FV. Adding NaHCO3 can increase the FV of SPS-MCP gels in a concentration-dependent manner. Rheological results indicated that adding NaHCO3 at a low concentration decreased the storage modulus of SPS-MCP gels, whereas adding it at a high concentration increased the storage modulus. The storage modulus of SPS-MCP gels increased with increasing concentration of NaHCO3. The addition of Na2CO3 and NaHCO3 improved the textural properties of SPS-MCP gels and decreased the water mobility. Infrared results indicated that adding alkali can enhance the hydrogen bonding between SPS and MCP. Scanning electron microscopy results suggested that alkali can reduce the size of gels, and make the structure more compact.

Inhibitory effects of alkaline extract from the pericarp of Citrus reticulata Blanco on collagen behavior in bleomycin-induced pulmonary fibrosis.

ETHNOPHARMACOLOGICAL RELEVANCE: Peel of Citrus reticulata, a Chinese herbal drug with functions of regulating Qi and expelling phlegm, has been used for the treatment of lung related diseases in Chinese medicine for a long time. Its detailed effects on collagen in anti-idiopathic pulmonary fibrosis (IPF) is still unclear. AIM OF THE STUDY: To explore the effects of citrus alkaline extract (CAE) on collagen synthesis, crosslinking and deposition in pulmonary fibrosis and understand the possible signal pathways involved in the activity. MATERIALS AND METHODS: CAE was prepared from C. reticulata. Bleomycin-induced pulmonary fibrosis mouse model was applied. Pulmonary fibrosis of lung was estimated with histopathology analysis, and collagen deposition was evaluated with immunohistochemistry. Collagen crosslinking related biomarkers and enzymes were analyzed with chemical methods, immunohistochemical and western blot analyses. RESULTS: CAE oral administration lowered hydroxyproline content, inhibited the collagen deposition including expressions of collagen I and III, and relieved bleomycin-induced pulmonary fibrosis in mice model. The productions of a collagen crosslink pyridinoline and crosslinking related enzymes including lysyl oxidase (LOX), lysyl oxidase-like protein 1 (LOXL1) in lung were suppressed by CAE treatment. Furthermore, the protein expressions of TGF-ß1 and Smad3 levels in lungs were also downregulated by CAE. CONCLUSIONS: This study demonstrated that CAE inhibited collagen synthesis, crosslinking and deposition, and ameliorated bleomycin-induced pulmonary fibrosis. Preliminary mechanism study revealed that CAE exerted its bioactivity at least via downregulation of TGF-ß1/Smad3 pathway. Our findings provided a great potential in fighting IPF based on CAE.

Content of Phenolic Compounds in Meadow Vegetation and Soil Depending on the Isolation Method.

The aim of this paper was to determine the effect of the hydrolysis method on the amounts of phenolic compounds in the plant material in soil and, as a consequence, on the parameters to determine the degree of lignins transformation in soils. The study included the plant material (hay, sward, and roots) and soil-Albic Brunic Arenosol (horizon A, AE, and Bsv) samples. Phenolic compounds were isolated at two stages by applying acid hydrolysis followed by alkaline re-hydrolysis. The quantitative and qualitative analysis of phenolic compounds was performed with high-performance liquid chromatography with a DAD. The content of phenolic compounds in the extracts depended on the hydrolysis method and it was determined by the type of the research material. The amounts of phenolic compounds contained in the alkaline hydrolysates accounted for 55.7% (soil, horizon Bsv)-454% (roots) of their content in acid hydrolysates. In the extracts from acid hydrolysates, chlorogenic and p-hydroxybenzoic acids were dominant. In the alkaline extracts from the plant material, the highest content was recorded for p-coumaric and ferulic acids, and in the extracts from soil, ferulic and chlorogenic acids. A combination of acid and alkaline hydrolysis ensures the best extraction efficiency of insoluble-bound forms of polyphenols from plant and soil material.

Effects of Plasma Treatment on the Bioactivity of Alkali-Treated Ceria-Stabilised Zirconia/Alumina Nanocomposite (NANOZR).

Zirconia ceramics such as ceria-stabilized zirconia/alumina nanocomposites (nano-ZR) are applied as implant materials due to their excellent mechanical properties. However, surface treatment is required to obtain sufficient biocompatibility. In the present study, we explored the material surface functionalization and assessed the initial adhesion of rat bone marrow mesenchymal stem cells, their osteogenic differentiation, and production of hard tissue, on plasma-treated alkali-modified nano-ZR. Superhydrophilicity was observed on the plasma-treated surface of alkali-treated nano-ZR along with hydroxide formation and reduced surface carbon. A decreased contact angle was also observed as nano-ZR attained an appropriate wettability index. Treated samples showed higher in vitro bovine serum albumin (BSA) adsorption, initial adhesion of bone marrow and endothelial vascular cells, high alkaline phosphatase activity, and increased expression of bone differentiation-related factors. Furthermore, the in vivo performance of treated nano-ZR was evaluated by implantation in the femur of male Sprague-Dawley rats. The results showed that the amount of bone formed after the plasma treatment of alkali-modified nano-ZR was higher than that of untreated nano-ZR. Thus, induction of superhydrophilicity in nano-ZR via atmospheric pressure plasma treatment affects bone marrow and vascular cell adhesion and promotes bone formation without altering other surface properties.

Modified citrus pectins by UV/H2O2 oxidation at acidic and basic conditions: Structures and in vitro anti-inflammatory, anti-proliferative activities.

Two modified citrus pectins, MCP4 and MCP10, were prepared by UV/H2O2 treatment at pH 4 and pH 10, respectively, and their structures were characterized. MCP10 had a rhamnogalacturonan-I (RG-I) enriched backbone with a high degree of branching (DB ∼61 %) and a low methoxylation degree (24 %). MCP4 had a homogalacturonan enriched backbone with a high degree (46 %) of methoxylation and a low DB (∼41 %) of RG-I branches. MCP10 exhibited a higher anti-inflammatory activity than MCP4 in suppressing the NF-κB expression and the production of pro-inflammatory factors TNF-α and IL-1ß of THP-1 cells stimulated by lipopolysaccharide. MCP10 also showed a stronger inhibitory effect on Caco-2 cell proliferation. The stronger bioactivities of MCP10 may be attributable to the abundant branches and the proper length of terminal galactan residues attached to the RG-I domain.

Ultrasound-assisted alkali-urea pre-treatment of Miscanthus × giganteus for enhanced extraction of cellulose fiber.

Ultrasound-assisted-alkali-urea (UAAU) pre-treatment of miscanthus biomass was investigated for enhanced delignification and extraction of cellulose fiber. The effects of pre-treatment conditions investigated were: sonication time (10.0, 15.0 and 20.0 min), alkali (NaOH) concentration (2.0, 3.5 and 5.0 %, w/v) and urea-concentration (1.0, 1.75 and 2.5 %, w/v) on the delignification and cellulose content. The process parameters were studied and optimized using a response surface methodology (RSM) based on the Box Behnken Design (BBD). From the RSM-BBD analysis, he optimized pre-treatment conditions were 2.1 % NaOH, 1.7 % urea and 15.5-min sonication time with maximal cellulose and lignin contents of 47.8 % (w/w) and 27.5 % (w/w) respectively. The pre-treated samples were further characterized by FTIR, colorimeter, SEM, XRD, and TGA analyses. The UAAU pre-treated samples have higher delignification and cellulose contents than the AU pre-treatment without sonication. Furthermore, the ultrasound process allowed selective removal of lignin without substantially degrading the functionalities of cellulose fiber. The UAAU pre-treated samples exhibited higher thermal stability, fibrillation, crystallinity index and smaller crystallite size.

High-energy alkaline milling as a potential physical and chemical cornstarch ecofriendly treatment to produce nixtamalized flours.

In this study, hard corn grains were nixtamalized (alkali-heat treatment) by a high-energy ball mill to investigate the effects on its physicochemical, textural, and microstructural properties. Ball milling modifies the structure and properties of cornstarch. The gelatinization peak of starch was evidenced and thermal and pasting properties were significantly affected. With regard to rheological properties, the viscosity peak increased from 2454 cP in traditional nixtamalized flour to 4294 cP in high-energy milling treatments with 1.4% of Ca(OH)2 and 20% moisture content, C1.4, while enthalpy ranged from 3.5 to 0.34 J/g, respectively. High-energy milling influenced the Fourier-Transform InfraRed Spectroscopic (FT-IR) patterns. All of the samples of the corn-grain starches presented the typical A-type X-ray diffraction pattern. The crystallinity of starch from CG showed a lower intensity in peaks 2θ ~ 15 and 23° compared with starch from WG and YG. The textural properties of the masas were influenced, adhesiveness was reduced, but cohesiveness was increased by the addition of Ca(OH)2. In the structural characterization by E-SEM, the control presented a greater amount of agglomerated starch granules, followed by the high-energy milling treatments. The results suggest that high-energy alkaline milling could be a potential physical and chemical method to modify corn-starch properties and obtain nixtamalized products.

Rheological characterization of RG-I chicory root pectin extracted by hot alkali and chelators.

This work aimed to extract gelatinous chicory root pectin (CRP) and evaluated the rheological behavior of the dispersions and gels. CRP was extracted by citric acid (CEP), alkaline (AEP), ammonium oxalate (OEP) and sodium citrate (SEP). The yield, molecular weight (Mw) and the degree of esterification (DE) of pectin samples varied from 8.8 to 14.8% (w/w), 204 to 336 k Da and 4.0 to 47.4%, respectively. AFM studies showed self-organize on mica of CEP, revealing a random coil conformation due to the interaction of multiple branching, whereas, AEP exhibited long linear filamentous structures. The flow behavior study verified the pseudoplastic character of CEP and SEP at 25 °C, while OEP and AEP belonged to dilatant fluid, besides, a closed hysteresis loop was observed when the CEP concentration increased to 1.5%. OEP gel was thermo insensitive and stiff, AEP gel presented most sensitive to calcium ion but more brittle, and SEP was observed a weak syneresis in spite of the poor gelation property. The texture analysis indicated OEP gel had a superior firmness and chewiness. These findings demonstrated that CRP may be attractive as a thickener or gelling agent to modulate textures of sugar-free and calcium content food.

Sustainable production, biochemical and molecular characterization of thermo-and-solvent stable alkaline serine keratinase from novel Bacillus pumilus AR57 for promising poultry solid waste management.

The increasing amount of recalcitrant keratinous wastes generated from the poultry industry poses a serious threat to the environment. Keratinase have gained much attention to convert these wastes into valuable products. Ever since primitive feathers first appeared on dinosaurs, microorganisms have evolved to degrade this most recalcitrant keratin. In this study, we identified a promising keratinolytic bacterial strain for bioconversion of poultry solid wastes. A true keratinolytic bacterium was isolated from the slaughterhouse soil and was identified and designated as Bacillus pumilus AR57 by 16S rRNA sequencing. For enhanced keratinase production and rapid keratin degradation, the media components and substrate concentration were optimized through shake flask culture. White chicken feather (1% w/v) was found to be the good substrate concentration for high keratinase production when supplemented with simple medium ingredients. The biochemical characterization reveals astounding results which makes the B. pumilus AR57 keratinase as a novel and unique protease. Optimum activity of the crude enzyme was exhibited at pH 9 and 45 °C. The crude extracellular keratinase was characterized as thermo-and-solvent (DMSO) stable serine keratinase. Bacillus pumilus AR57 showed complete degradation (100%) of white chicken feather (1% w/v) within 18 h when incubated in modified minimal medium supplemented with DMSO (1% v/v) at 150 rpm at 37 °C. Keratinase from modified minimal medium supplemented with DMSO exhibits a half-life of 4 days. Whereas, keratinase from the modified minimal medium fortified with white chicken feather (1% w/v) was stable for 3 h only. Feather meal produced by B. pumilus AR57 was found to be rich in essential amino acids. Hence, we proposed B. pumilus AR57 as a potential candidate for the future application in eco-friendly bioconversion of poultry waste and the keratinase could play a pivotal role in the detergent industry. While feather meal may serve as an alternative to produce animal feed and biofertilizers.

VS2 and its doped composition: Catalytic depolymerization of alkali lignin for increased bio-oil production.

VS2 spheres and VS2 sheets with doped compositions (Mo, Ag and graphite) were successfully prepared by one-step hydrothermal method and characterized by different techniques including X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption isotherms. Catalysts were applied for the depolymerization of alkali lignin. VS2 spheres exhibited lower yield of degraded lignin and bio-oil than those with VS2 sheets and VS2 flowers heated to 250 °C and held for 1.5 h with 2.0 MPa H2. The catalytic depolymerization performance was markedly affected by the dopant in the VS2 sheets, with the highest degraded lignin yield of 81.22%, achieved over 5 wt% Ag-VS2 at 290 °C under 2.0 MPa H2 for 1.5 h, yielding 61.23% bio-oil. The VS2-based catalysts show excellent selectivity in the interruption of the lignin structure and target production of bio-oil. The bio-oil showed that the relevant contents of a phenolic-type compound changes significantly according to the dopant in the VS2 catalyst.

The chemical transformations for Radix Astragali via different alkaline wash conditions by quantitative and qualitative analyses.

Radix Astragali is a famous Chinese traditional and folk medicine with a wide range of medicinal values in clinic. In this study, an analytical efficient strategy based on UHPLC-QQQ-MS/MS and UHPLC-LTQ-Orbitrap-MS/MS was established to explore and reveal the chemical transformations for Radix Astragali under different alkaline wash conditions for analytical sample preparation. Firstly, a rapid and sensitive UHPLC-QQQ-MS/MS method for the quantification of 14 main constituents in Radix Astragali has been developed and validated. Secondly, according to the standard substance comparison, accurate mass measurements, mass fragmentation behaviors and related literatures, a total of 102 components have been screened and identified using UHPLC-LTQ-Orbitrap method. Among them, 47 compounds are saponins, and the other 55 are flavonoids. Consequently, there were two chemical transformations including hydrolysis and degradation observed when Radix Astragali was treated with alkali. Besides, hydrolysis of glycosides and acetyl played a considerably important role in the process of sample preparation. It has been proved that 10 % ammonia could relatively guarantee the high content of astragaloside IV and avoid the over-degradation of most chemical ingredients in Radix Astragali. In conclusion, this work would provide a scientific and practical method for quality control of Radix Astragali as well as its compound preparations.

In vivo antiaging effects of alkaline water supplementation.

Telomeres length and telomerase activity are currently considered aging molecular stigmata. Water is a major requirement for our body and water should be alkaline. Recent reports have shown that aging is related to a reduced water intake. We wanted to investigate the effect of the daily intake of alkaline water on the molecular hallmark of aging and the anti-oxidant response. We watered a mouse model of aging with or without alkaline supplementation. After 10 months, we obtained the blood, the bone marrow and the ovaries from both groups. In the blood, we measured the levels of ROS, SOD-1, GSH, and the telomerase activity and analysed the bone marrow and the ovaries for the telomeres length. We found reduced ROS levels and increased SOD-1, GSH, telomerase activity and telomeres length in alkaline supplemented mice. We show here that watering by using alkaline water supplementation highly improves aging at the molecular level.

Properties of dietary fiber from citrus obtained through alkaline hydrogen peroxide treatment and homogenization treatment.

In this research, citrus dietary fiber (CF) was modified by two methods, homogenization or alkalinehydrogenperoxide (chemical) treatment, to improve its physicochemical properties. The homogenization and chemical treatment highly increased the CF's water swelling capacity by 433% and 276%, respectively. The water holding capacity of CF significantly increased by 253% after homogenization and 197% after chemical treatment. Both treatments increased CF's total dietary fiber content and thermal stability. Moreover, the chemically treated CF thermal stability was higherthan the homogenized one. Scanning electron microscopy (SEM) results showed the modified CFs exhibited porous structure. XRD and NMR results showed that the CF's crystalline region could be disrupted by both treatments. Overall results suggest that the two treatments could effectivelyimprove CF physicochemical properties. The modified fibers might be potentially used as functional food ingredients.

Optimization of Alkali Extraction and Properties of Polysaccharides from Ziziphus jujuba cv. Residue.

Ziziphus jujuba cv. Muzao is a plant widely cultivated in the Yellow River Basin of China. It has nutritional and healthcare functions, in which polysaccharides are the main components of its bio-functions. In order to make effective use of Ziziphus jujuba cv. Muzao residue resources and explore new functional food ingredients, the polysaccharide (ZJRP) from Ziziphus jujuba cv. Muzao residues were extracted by sodium hydroxide, and the optimal extraction conditions of ZJRP were obtained by the response surface method. The basic composition and antioxidant effects of ZJRP were determined. The results showed that ZJRP has significant antioxidant activity, mainly reflected in the high DPPH radical scavenging rate, which may be related to their high content of galacturonic acid and the extraction method. In addition, the rheological and thermal properties of ZJRP were respectively determined by a rheometer and differential scanning calorimetry (DSC), indicating that they have shear thinning properties and good thermal stability. Results showed that the alkaline extraction method can be used as a potential technique for extracting ZJRP with high antioxidant activity, and ZJRP can be further explored as a functional food ingredient.