Design of γ-AlOOH, γ-MnOOH, and α-Mn2O3 nanorods as advanced antibacterial active agents.

In the current study, γ-AlOOH, γ-MnOOH, and α-Mn2O3 nanorods (NRs) were easily synthesized and applied as advanced antibacterial materials. γ-AlOOH NRs with 20 nm width, [100] crystal plane, and 200 nm length were fabricated through a surfactant-directed solvothermal method. γ-MnOOH NRs with 20 nm width, [101] crystal direction and 500 nm length were fabricated through a hydrothermal method. The prepared γ-MnOOH NRs were calcinated (for 5 h) at 700 °C to produce α-Mn2O3 NRs with 20 nm average width and increased surface area. The NRs' structures were confirmed through FT-IR, XRD, XPS, FESEM, and FETEM. The antibacterial activity of the NRs was studied against different Gram-negative and Gram-positive bacterial strains and yeast. The three NRs exhibited antibacterial activity against all of the used strains. Biological studies indicated that the NRs' antimicrobial activity increased in the order of γ-MnOOH < γ-AlOOH < α-Mn2O3 NRs. The α-Mn2O3 NRs exhibited the lowest MIC value (39 µg mL-1) against B. subtilis, B. pertussis, and P. aeruginosa. The prepared NRs exhibited a higher antimicrobial potential toward Gram-positive bacteria than Gram-negative bacteria. The higher antimicrobial activity of the α-Mn2O3 NRs is highlighted based on their larger surface area and smaller diameter. Consequently, uniform NR architectures, single crystallinity, small nanoscale diameters, and more highly exposed [110] Mn-polar surfaces outwards are promising structures for α-Mn2O3 antibacterial agents. These NRs adhered firmly to the bacterial cells causing cell wrapping and morphology disruption, and microbial death. The designed NRs provide a great platform for microbial growth inhibition.

Biosynthesis and characterization of magnesium oxide and manganese dioxide nanoparticles using Matricaria chamomilla L. extract and its inhibitory effect on Acidovorax oryzae strain RS-2.

Bacterial brown stripe (BBS) is one of the most economically important diseases of rice caused by Acidovorax oryzae (Ao). In order to ensure food security and safe consumption, the use of non-chemical approach is necessary. In this study, MgO and MnO2 were synthesized using chamomile flower extract. The synthesized MgO and MnO2 nanoparticles were characterized by UV-Visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission/scanning electron microscopy. The sizes were 18.2 and 16.5 nm for MgO and MnO2 nanoparticles, respectively. The MgO and MnO2 nanoparticles reduced the growth of Ao strain RS-2 by 62.9 and 71.3%, respectively. Also, the biofilm formation and swimming motility were significantly reduced compared to the control. The antibacterial mechanisms of MgO and MnO2 nanoparticles against RS-2 reveals that MgO and MnO2 nanoparticles penetrated the cells and destroyed the cell membrane leading to leakage of cytoplasmic content. Also, the flow cytometry observation reveals that the apoptotic cell ratio of RS-2 increased from 0.97% to 99.52 and 99.94% when treated with MgO and MnO2 nanoparticles, respectively. Altogether, the results suggest that the synthesized MgO and MnO2 nanoparticles could serve as an alternative approach method for the management of BBS.

Microwave-Assisted Synthesis of Black Titanium Monoxide for Synergistic Tumor Phototherapy.

Black titanium oxide has attracted tremendous interest in tumor phototherapy via converting light energy to heat and reactive oxygen species (ROS). Nevertheless, current synthesis methods suffer from inert gas shielding, high costs, complicated procedures, and expensive facilities, which are fairly impractical for treatment application. Herein, we propose a one-step strategy for fast facile synthesis of black TiO nanoparticles via a microwave-assisted hydrothermal synthesis approach with Ti power, hydrochloric acid, and hydrofluoric acid without the requirement of an reducing agent and high-temperature calcination. The prepared black TiO nanoparticles with an average size of 52 nm exhibit strong absorbance from ultraviolet (UV) to near-infrared light region, favoring a single agent and single light-induced synergistic phototherapy of tumors. The black TiO nanoparticles shows an excellent performance in phototherapy with a photothermal conversion efficiency up to 50% and a prominent ROS generation under 808 nm laser irradiation. The toxicity and therapeutic effect in vitro and in vivo are investigated, and the results elucidate that black TiO nanoparticles possess good biocompatibility and remarkable synergistic tumor therapeutic efficacy. The proposed microwave-assisted method opens up a novel way for the synthesis of titanium-based material in a simple and fast manner, promoting their applications in the biomedical field.

One step green synthesis of larvicidal, and azo dye degrading antibacterial nanoparticles by response surface methodology.

The present study explored the one step extracellular green synthesis of Iron oxide (FexOy) and manganese oxide nanoparticles (MnNPs) using aqueous extract of Acorus calamus rhizome. The organic chemicals including polyphenol compounds responsible for bio-reduction and stabilization from the polyphenol enriched microwave irradiated aqueous extract of Acorus calamus were studied using GC-MS analysis. Further, their synthesis conditions were optimized using response surface methodology (RSM) and central composite design (CCD) using three variables. The green synthesized Iron oxide and Manganese oxide NPs were characterized by UV, FTIR, XRD, TEM and SEM. Results indicated that the Iron oxide NPs and mixture of iron and manganese NPs showed photocatalytic excellent activities in reducing dyes like methylene blue (0.1%) and Congo red (0.25%) at 0.03% NPs. However, Mn NPs showed moderate activity. On a contrary, manganese showed better larvicidal activity compared to Iron oxide NPs against the phytopathogens commonly affecting the vegetable crops. The present finding showed that high mortality rate at 30 µg/ml concentration of manganese NPs was comparatively interesting. In addition, NPs overall had appreciable activity with P. aeruginosa being more sensitive to Iron oxide NPs (22 ±â€¯2 mm zone of inhibition) and manganese NPs (13 ±â€¯2 mm zone of inhibition) and Iron oxide NPs completely inhibited the growth of A. flavus at 40 µg/ml concentration.

Integration of Polymerization and Biomineralization as a Strategy to Facilely Synthesize Nanotheranostic Agents.

Integration of biological macromolecules with inorganic materials via biomineralization has demonstrated great potential for development of nanotheranostic agents. To produce multifunctionality, integration of multiple components in the biomineralized theranostic agents is required; however, how to efficiently and reproducibly implement this is challenging. In this report, a universal biomineralization strategy is developed by incorporation of oxidization polymerization into albumin-templated biomineralization for facile synthesis of nanotheranostic agents. A series of biomineralized polymers and manganese dioxide hybrid nanoparticles (PMHNs) can be synthesized via the polymerization of various monomers, including dopamine (DA), epigallocatechin (EGC), pyrrole (PY), and diaminopyridine (DP), along with the reduction of KMnO4 and formation of manganese dioxide nanoparticles in albumin templates. These biomineralized PMHNs demonstrate ultrahigh MRI (longitudinal relaxivity up to 38 mM-1 s-1) and ultrasonic (US) imaging contrasting capabilities and have excellent photothermal therapy efficacy with complete ablation of orthotopic tumors. Moreover, these biomineralized hybrid nanoparticles can be effectively excreted through the kidneys, avoiding potential systemic toxicity. Thus, integration of polymerization into biomineralization presents a strategy for the fabrication of hybrid nanomaterials, allowing the production of multifunctional and biocompatible nanotheranostic agents via a facile one-pot method.

Synthesis and characterization of Tamoxifen citrate modified reduced graphene oxide nano sheets for breast cancer therapy.

Theranostic agents are of immense consideration in the current generation nanomedicine. In this study, we have developed a facile approach for the fabrication of Tamoxifen citrate modified nanosized reduced graphene oxide (nano-rGO) with more stability and low cytotoxicity. The prepared nano-rGO sheets were characterized using HR-TEM and AFM imaging techniques. Further, the cytotoxicity was assessed using MTT assay on female BALB/c nude mice MCF-7 cell lines. In addition, by means of continuous-wave near-infrared laser, cancer cells in vivo were significantly ablated because of the photothermal effect stimulated by tamoxifen modified nano-rGO. These results indicated that the prepared tamoxifen modified nano-rGO has the ability to apply in the photothermal therapy of breast cancers. Consequently, further exploration of photothermal therapeutics is desirable for the synthesis of novel nano materials with additional functionalities.

Synthesis of 3,5-Disubstituted Isoxazoles Containing Privileged Substructures with a Diverse Display of Polar Surface Area.

We designed and synthesized the molecular framework of 3,5-disubstituted isoxazoles containing privileged substructures with various substituents which uniquely display polar surface area in a diverse manner. A library of 3,5-disubstituted isoxazoles were systematically prepared via 1,3-dipolar cycloaddition of alkynes with nitrile oxides prepared by two complementary synthetic routes; method A utilized a halogenating agent with a base and method B utilized a hypervalent iodine reagent. Through the biological evaluation of corresponding isoxazoles via three independent phenotypic assays, the different pattern of biological activities was shown according to the type of privileged substructure and substituent. These results demonstrated the significance of molecular design via introducing privileged substructures and various substituents to make a diverse arrangement of polar surface area within a similar 3-dimensional molecular framework.

Synthesis of Photoactive Materials by Sonication: Application in Photocatalysis and Solar Cells.

In recent years, a good number of methods have become available for the preparation of an important group of photoactive materials for applications in photocatalysis and solar cells. Nevertheless, the benefits derived from preparing those materials through unconventional approaches are very attractive from the green chemistry point of view. This critical review work is focused on sonication as one of these promising new synthetic procedures that allow control over size, morphology, nanostructure and tuning of catalytic properties. Ultrasound-based procedures offer a facile, versatile synthetic tool for the preparation of light-activated materials often inaccessible through conventional methods.

Synthesis of Ferromagnetic Fe0.6 Mn0.4 O Nanoflowers as a New Class of Magnetic Theranostic Platform for In Vivo T1 -T2 Dual-Mode Magnetic Resonance Imaging and Magnetic Hyperthermia Therapy.

Uniform wüstite Fe0.6 Mn0.4 O nanoflowers have been successfully developed as an innovative theranostic agent with T1 -T2 dual-mode magnetic resonance imaging (MRI), for diagnostic applications and therapeutic interventions via magnetic hyperthermia. Unlike their antiferromagnetic bulk counterpart, the obtained Fe0.6 Mn0.4 O nanoflowers show unique room-temperature ferromagnetic behavior, probably due to the presence of an exchange coupling effect. Combined with the flower-like morphology, ferromagnetic Fe0.6 Mn0.4 O nanoflowers are demonstrated to possess dual-modal MRI sensitivity, with longitudinal relaxivity r1 and transverse relaxivity r2 as high as 4.9 and 61.2 mm(-1) s(-1) [Fe]+[Mn], respectively. Further in vivo MRI carried out on the mouse orthotopic glioma model revealed gliomas are clearly delineated in both T1 - and T2 -weighted MR images, after administration of the Fe0.6 Mn0.4 O nanoflowers. In addition, the Fe0.6 Mn0.4 O nanoflowers also exhibit excellent magnetic induction heating effects. Both in vitro and in vivo magnetic hyperthermia experimentation has demonstrated that magnetic hyperthermia by using the innovative Fe0.6 Mn0.4 O nanoflowers can induce MCF-7 breast cancer cell apoptosis and a complete tumor regression without appreciable side effects. The results have demonstrated that the innovative Fe0.6 Mn0.4 O nanoflowers can be a new magnetic theranostic platform for in vivo T1 -T2 dual-mode MRI and magnetic thermotherapy, thereby achieving a one-stop diagnosis cum effective therapeutic modality in cancer management.

One-pot synthesis of PEGylated plasmonic MoO(3-x) hollow nanospheres for photoacoustic imaging guided chemo-photothermal combinational therapy of cancer.

Engineering design of plasmonic nanomaterials as on-demand theranostic nanoagents with imaging, drug carrier, and photothermal therapy (PTT) functions have profound impact on treatment of cancer. Here, a facile 'one-pot' template-free hydrothermal route was firstly developed for synthesis of plasmonic oxygen deficiency molybdenum oxide hollow nanospheres functionalized by poly(ethylene glycol) (PEG-MoO(3-x) HNSs). The as-prepared PEG-MoO(3-x) HNSs not only have good biocompatibility but also exhibit obvious localized surface plasmon resonance (LSPR) absorption in the near-infrared (NIR) region. Especially, due to its intrinsic mesoporous properties and effective photothermal conversion efficiency upon 808-nm NIR laser irradiation, the PEG-MoO(3-x) HNSs can be applied as a pH/NIR laser dual-responsive camptothecin (CPT) drug delivery nanoplatform for chemotherapy as well as PTT to cancer cells. A remarkably improved synergistic therapeutic effect to pancreatic (PANC-1) tumor-bearing mice was obtained compared to the result of chemotherapy or PTT alone. Apart from its application for drug delivery, the PEG-MoO(3-x) HNSs can also be employed as an effective contrast nanoagent for photoacoustic (PAT) imaging because of its high NIR absorption, making it promising as a theranostic nanoagent for PAT imaging-guided chemo-photothermal combinational cancer therapy in the nanomedicine field.

Synthesis and characterisation of the uranium pyrochlore betafite [(Ca,U)2(Ti,Nb,Ta)2O7].

Betafite of composition [(Ca,U)2(Ti,Nb,Ta)2O7] was prepared via a solid state synthesis route. The synthesis was shown to be sensitive to initial reactant ratios, the atmosphere used (oxidising, neutral, reducing) and time. The optimum conditions for the synthesis of betafite were found to be heating the reactants required at 1150°C for 48 h under an inert gas atmosphere. XRD characterisation revealed that the synthesised betafite contained minor impurities. EPMA analysis of a sectioned surface showed very small regions of Ca-free betafite on grain boundaries as well as minor rutile impurities. Some heterogeneity between the Nb:Ta ratio was observed by quantitative EPMA but was generally within the nomenclature requirements stated for betafite. SEM analysis revealed the synthesised betafite was comprised mostly of hexaoctohedral crystals of ∼ 3 µm in diameter. XPS analysis of the sample showed that the uranium in the synthesised betafite was predominately present in the U(5+) oxidation state. A minor amount of U(6+) was also detected which was possibly due to surface oxidation.

Phosphane-catalyzed [4+1] annulation between nitroalkenes and Morita-Baylis-Hillman carbonates: facile synthesis of isoxazoline N-oxides by phosphorus ylides.

A phosphane-catalyzed [4+1] annulation between nitroalkenes and Morita-Baylis-Hillman carbonates has been realized; this provides facile and diastereoselective access to polysubstituted isoxazoline N-oxides in moderate to excellent yields. In the annulation, an in situ formed allylic phosphorus ylide presumably serves as a pivotal active intermediate. This reaction accordingly represents the first example of phosphorus ylide initiated [4+1] cyclization of nitroalkenes to give isoxazoline N-oxides.

Biodiesel production via the transesterification of soybean oil using waste starfish (Asterina pectinifera).

Calcined waste starfish was used as a base catalyst for the production of biodiesel from soybean oil for the first time. A batch reactor was used for the transesterification reaction. The thermal characteristics and crystal structures of the waste starfish were investigated by thermo-gravimetric analysis and X-ray diffraction. The biodiesel yield was determined by measuring the content of fatty acid methyl esters (FAME). The calcination temperature appeared to be a very important parameter affecting the catalytic activity. The starfish-derived catalyst calcined at 750 °C or higher exhibited high activity for the transesterification reaction. The FAME content increased with increasing catalyst dose and methanol-over-oil ratio.

Alkali and heat treatment of titanium implant material for bioactivity.

PURPOSE: This study was conducted to evaluate alkali- and heat-treated titanium implant material. MATERIALS AND METHODS: Ninety-eight square plates of commercially pure titanium were divided into three groups. Group 1 plates were left untreated, and groups 2 and 3 were subjected to anodization and alkali treatment for 24 and 48 hours, respectively. Treated specimens were then subdivided into three equal subgroups (a, b, and c), which were heat treated for 1 hour at temperatures of 500°C, 700°C, and 800°C, respectively. Changes in the crystalline structure were analyzed using x-ray diffractometry. Surface roughness was measured using a surface roughness tester. Selected specimens were immersed in a specially prepared simulated body fluid for 10 days. Calcium and phosphorous deposition on the specimens was detected using energy dispersive x-ray analysis. RESULTS: Increasing the alkali treatment period and heat treatment temperature positively affected surface roughness and formation of a bioactive sodium titanium oxide (sodium titanate) layer on the titanium surface, especially after heat treatment at 800°C. There was a significantly higher calcium deposition on specimens of group 3 in comparison with those of groups 1 and 2. The results of pH and ion concentration changes of the used simulated body fluid confirmed the results of energy dispersive x-ray analysis. CONCLUSION: Alkali and heat treatment of titanium implant materials created better treatment conditions for obtaining a bioactive implant material.

Synthesis, characterization and antibacterial activity of mixed ligand dioxouranium complexes of 8-hydroxyquinoline and some amino acids.

Mixed ligand complexes of dioxouranium(VI) of the type [UO2(Q)(L)-2H2O] have been synthesized using 8-hydroxyquinoline (HQ) as a primary ligand and N- and/or O- donor amino acids (HL) such as L-lysine, L-aspartic acid and L-cysteine as secondary ligands. The metal complexes have been characterized on the basis of elemental analysis, electrical conductance, room temperature magnetic susceptibility measurements, spectral and thermal studies. The electrical conductance studies of the complexes in DMF in 10(-3) M concentration indicate their non-electrolytic nature. Room temperature magnetic susceptibility measurements revealed diamagnetic nature of the complexes. Electronic absorption spectra of the complexes show intra-ligand and charge transfer transitions, respectively. Bonding of the metal ion through N- and O- donor atoms of the ligands is revealed by IR studies and the chemical environment of the protons is also confirmed by NMR studies. The thermal analysis data of the complexes indicate the presence of coordinated water molecules. The agar cup and tube dilution methods have been used to study the antibacterial activity of the complexes against the pathogenic bacteria S. aureus, C. diphtherinae, S. typhi and E. coli.

Electrochemical insertion of lithium in mechanochemically synthesized Zn2SnO4.

We studied the electrochemical insertion of Li in mechanochemically prepared Zn(2)SnO(4). The mechanism of the electrochemical reaction was investigated by using X-ray diffraction, nuclear magnetic resonance spectroscopy, and Mössbauer spectroscopy. Changes in the morphology of the Zn(2)SnO(4) particles were studied by in situ scanning electron microscopy. The results were compared with mixtures of SnO(2) + ZnO and with Zn(2)SnO(4) prepared by conventional solid-state synthesis and showed that the mechanochemically prepared Zn(2)SnO(4) exhibits the best cyclic stability of these samples.

Synthesis and biological activity of mixed ligand dioxouranium(VI) and thorium(IV) complexes.

Mixed ligand complexes of dioxouranium(VI) and thorium(IV) in the proportion 1:1:1 and 1:2:1 have been synthesized using 8-hydroxyquinoline as a primary ligand and L-proline and 4-hydroxy-L-proline as secondary ligands, respectively. The metal complexes have been characterized on the basis of elemental analysis, molar conductance, magnetic, spectral and thermal studies. The molar conductance studies of the complexes in DMF at 10(-3) M concentrations indicate their non-electrolytic nature. Room temperature magnetic susceptibility measurements revealed diamagnetic nature of the complexes. Electronic absorption spectra of the complexes show intra-ligand and charge transfer transitions, respectively. The thermal analysis data of the complexes indicates the presence of a coordinated water molecule/molecules. The tube dilution method has been used to study the antibacterial activity of the complexes against the pathogenic bacteria Staphylococcus aureus and Escherichia coli. The results have been compared against those of control tetracycline, which was screened simultaneously. The complexes have been screened for in vitro cytotoxicity (IC50) studies against Ehrlich ascites cells and Dalton's lymphoma ascites cells, respectively.

One-pot synthesis of functionalized 4,5-dihydroisoxazole derivatives via nitrile oxides and biological evaluation with plant cells.

1,3 Dipolar cycloadditions of nitrile oxides generated in situ in the presence of a variety of olefins provided 4,5-dihydroisoxazoles. The whole procedure could be performed in a practical and efficient one-pot operation. The products are of excellent purity (95%) and are isolated in 60-83% yields. Some of them enhanced the accumulation of indole alkaloids in periwinkle cell cultures.

Ascorbate depletion as a consequence of product recycling during dopamine beta-monooxygenase catalyzed selenoxidation.

The competence of dopamine beta-monooxygenase (DBM) to process selenide substrates was investigated, in anticipation that the expected selenoxide products would exhibit unique reactivity and redox properties. The prototypical selenide phenyl 2-aminoethyl selenide (PAESe) was synthesized and shown to be a substrate for DBM with the characteristic e/O2 ratio of 2:1 for monooxygenation. The kinetic parameters for oxygenation of PAESe were found to be similar to those for the DBM-catalyzed sulfoxidation of the cognate sulfide phenyl 2-aminoethyl sulfide [May, S. W., & Phillips, R. S. (1980) J. Am. Chem. Soc. 102, 5981-5983], and selenoxidation was stimulated by fumarate in a manner similar to other well-characterized DBM monooxygenation reactions. Identification of phenyl 2-aminoethyl selenoxide (PAESeO) as the enzymatic product was accomplished by the demonstration of coincident elution of authentic PAESeO with the enzymatic product in three significantly different HPLC systems. PAESeO was found to oxidize ascorbic acid with the concomitant and stoichiometric reduction of PAESeO back to the selenide, PAESe. As a consequence of this nonenzymatic reaction, ascorbate-supported DBM turnover was prematurely terminated under standard assay conditions due to depletion of reduced ascorbate. The kinetics of the redox reaction between PAESeO and ascorbate were investigated with a spectrophotometric assay of ascorbate at 300 nm, and a second-order rate constant of 3.4 M-1 s-1 was determined at pH 5.0, 25 degrees C. Spectrophotometric assay of cytochrome c (cyt c) reduction at 550 nm during the oxidation of ascorbate by PAESeO demonstrated that no cyt c trappable semidehydroascorbate was produced in this nonenzymatic reaction.(ABSTRACT TRUNCATED AT 250 WORDS)