Topical Nanoemulsion Hydrogel Formulated from Supercritical Fluid Extracted Palm-Pressed Fiber Oil and Virgin Coconut Oil with Antioxidant and Antibacterial Effects.

Skincare industries are growing rapidly around the globe but most products are formulated using synthetic chemicals and organic solvent extracted plant extracts, thus may be hazardous to the users and incur higher cost for purification that eventually leads to phytonutrient degradation. Therefore, this study aimed to formulate a stable natural formulation with antioxidant and antimicrobial activities by using supercritical carbon dioxide (SC-CO 2 ) extracted palm-pressed fiber oil (PPFO) as an active ingredient with virgin coconut oil (VCO) as a formulation base. PPFO was extracted from fresh palm-pressed fiber (PPF) while VCO was from dried grated coconut copra using SC-CO 2 before being subjected to the analyses of physicochemical properties, phytonutrient content and biological activities including antioxidant and antimicrobial. The nanoemulgel formulations were then developed and examined for their stability through accelerated stability study for 3 months by measuring their pH, particle size, polydispersity index and zeta potential. The results showed that PPFO contained a high amount of phytonutrients, especially total carotenoid (1497 ppm) and total tocopherol and tocotrienol (2269 ppm) contents. The newly developed nanoemulgels maintained their particles in nano size and showed good stability with high negative zeta potentials. Sample nanoemulgel formulated with 3% PPFO diluted in VCO as effective concentration showed significantly stronger antioxidant activity than the control which was formulated from 3% tocopheryl acetate diluted in mineral oil, towards DPPH and ABTS radicals, with IC 50 values of 67.41 and 44.28 µL/mL, respectively. For the antibacterial activities, the sample nanoemulgel was found to inhibit Gram positive bacteria S. aureus and S. epidermidis growth but not the Gram negative strain E. coli. Overall, this study revealed the potential of SF-extracted PPFO as an active ingredient in the antioxidant topical formulations thus future study on in vitro skin cell models is highly recommended for validation.

Chitosan/Virgin-Coconut-Oil-Based System Enriched with Cubosomes: A 3D Drug-Delivery Approach.

Emulsion-based systems that combine natural polymers with vegetable oils have been identified as a promising research avenue for developing structures with potential for biomedical applications. Herein, chitosan (CHT), a natural polymer, and virgin coconut oil (VCO), a resource obtained from coconut kernels, were combined to create an emulsion system. Phytantriol-based cubosomes encapsulating sodium diclofenac, an anti-inflammatory drug, were further dispersed into CHT/VCO- based emulsion. Then, the emulsions were frozen and freeze-dried to produce scaffolds. The scaffolds had a porous structure ranging from 20.4 to 73.4 µm, a high swelling ability (up to 900%) in PBS, and adequate stiffness, notably in the presence of cubosomes. Moreover, a well-sustained release of the entrapped diclofenac in the cubosomes into the CHT/VCO-based system, with an accumulated release of 45 ± 2%, was confirmed in PBS, compared to free diclofenac dispersed (80 ± 4%) into CHT/VCO-based structures. Overall, the present approach opens up new avenues for designing porous biomaterials for drug delivery through a sustainable pathway.

Physicochemical characterization and fatty acid profiles of testa oils from various coconut (Cocos nucifera L.) genotypes.

BACKGROUND: Cocos nucifera (L.) is an important plantation crop with immense but untapped nutraceutical potential. Despite its bioactive potential, the biochemical features of testa oils of various coconut genotypes are poorly understood. Hence, in this study, the physicochemical characteristics of testa oils extracted from six coconut genotypes - namely West Coast Tall (WCT), Federated Malay States Tall (FMST), Chowghat Orange Dwarf (COD), Malayan Yellow Dwarf (MYD), and two Dwarf × Dwarf (D × D hybrids) viz., Cameroon Red Dwarf (CRD) × Ganga Bondam Green Dwarf (GBGD) and MYD × Chowghat Green Dwarf (CGD) - were analyzed. RESULTS: The proportion of testa in the nuts (fruits) (1.29-3.42%), the proportion of oil in the testa (40.97-50.56%), and biochemical components in testa oils - namely proxidant elements Fe (34.17-62.48 ppm) and Cu (1.63-2.77 ppm), and the total phenolic content (6.84-8.67 mg GAE/100 g), and phytosterol content (54.66-137.73 mg CE/100 g) varied depending on the coconut genotypes. The saturated fatty acid content of testa oils (67.75 to 78.78%) was lower in comparison with that of coconut kernel oils. Similarly, the lauric acid (26.66-32.04%), myristic (18.31-19.60%), and palmitic acid (13.43-15.71%,) content of testa oils varied significantly in comparison with the coconut kernel oils (32-51%, 17-21% and 6.9-14%, respectively). Liquid chromatography-mass spectrometry (LC-MS) analysis revealed the presence of 18 phenolic acids in coconut testa oil. Multivariate analysis revealed the biochemical attributes that defined the principal components loadings. Hierarchical clustering analysis of the genotypes showed two distinct clusters. CONCLUSION: This study reveals the genotypic variations in the nutritionally important biochemical components of coconut testa oils. The relatively high concentration of polyunsaturated fatty acids (PUFA) and polyphenol content in testa oils warrant further investigation to explore their nutraceutical potential. © 2022 Society of Chemical Industry.

Production of Cocoa Butter Substitute via Enzymatic Interesterification of Fully Hydrogenated Palm Kernel Oil, Coconut Oil and Fully Hydrogenated Palm Stearin Blends.

This research synthesized structure lipids (SL) from blends of fully hydrogenated palm kernel oil (FHPKO), coconut oil (CNO) and fully hydrogenated palm stearin (FHPS) by enzymatic interesterification (EIE)using rProROL, an sn-1,3-specific lipase from Rhizopus oryzae, as a catalyst. Five physical blends of FHPKO:CNO:FHPS were prepared with the following wt. ratios: 40:10:50, 50:10:40, 60:10:30, 70:10:20 and 80:10:10. The EIE reactions were carried out at 60℃ for 6 h in a batch-type reactor using rProROL 10% wt. of the substrate. It was found that EIE significantly modified the triacylglycerol compositions of the fat blends resulting in changes in the crystallization and melting behavior. In particular, SL obtained from EIE of blend 70:10:20 exhibited high potential to be used as a cocoa butter substitute (CBS) because it showed similar solid fat content curve to the commercial CBS and crystallized into fine spherulites and desirable ß' polymorph.

An Intricate Review on Nutritional and Analytical Profiling of Coconut, Flaxseed, Olive, and Sunflower Oil Blends.

Vegetable oils (VOs), being our major dietary fat source, play a vital role in nourishment. Different VOs have highly contrasting fatty acid (FA) profiles and hence possess varying levels of health protectiveness. Consumption of a single VO cannot meet the recommended allowances of various FA either from saturated FA (SFA), monounsaturated FA (MUFA), polyunsaturated FA (PUFA), Ω-3 PUFAs, and medium-chain triglycerides (MCTs). Coconut oil (CO), flaxseed oil (FO), olive oil (OO), and sunflower oil (SFO) are among the top listed contrast VOs that are highly appreciated based on their rich contents of SFAs, Ω-3 PUFAs, MUFAs, and Ω-6 PUFA, respectively. Besides being protective against various disease biomarkers, these contrasting VOs are still inappropriate when consumed alone in 100% of daily fat recommendations. This review compiles the available data on blending of such contrasting VOs into single tailored blended oil (BO) with suitable FA composition to meet the recommended levels of SFA, MUFA, PUFA, MCTs, and Ω-3 to Ω-6 PUFA ratios which could ultimately serve as a cost-effective dietary intervention towards the health protectiveness and improvement of the whole population in general. The blending of any two or more VOs from CO, FO, OO, and SFO in the form of binary, ternary, or another type of blending was found to be very conclusive towards balancing FA composition; enhancing physiochemical and stability properties; and promising the therapeutic protectiveness of the resultant BOs.

Potato starch altered the rheological, printing, and melting properties of 3D-printable fat analogs based on inulin emulsion-filled gels.

Plant-based oil inks that imitate the texture and melting behavior of traditional animal fats using 3D printing have been developed. The influence of the incorporation of potato starch and the type of oil on rheology and meltability was investigated. The results showed that the dynamic modulus and hardness of fat analogs increased, whereas fat analog meltability decreased with an increase in potato starch content. Coconut oil and soybean oil-containing fat analogs incorporated with proper potato starch levels exhibited good printability and similar meltability to commercial beef and pork fats. The addition of potato starch suppressed fat analog meltability as it disrupted the inulin matrix. Fat analogs containing coconut oil could be texturized at temperatures lower than those required for their soybean oil counterparts. The fat analogs were solid at room temperature, demonstrated good printability, and imitated the melting behavior of fat contained in real meat throughout the cooking process.

Encapsulation of lipophilic polyphenols in plant-based nanoemulsions: impact of carrier oil on lipid digestion and curcumin, resveratrol and quercetin bioaccessibility.

Lipophilic polyphenol compounds (LPCs) are claimed to exhibit a broad spectrum of biological activities that may improve human health and wellbeing, including antioxidant, anti-inflammatory, and anti-cancer properties. Nanoemulsion-based delivery systems have been developed to encapsulate LPCs so as to increase their food matrix compatibility, physicochemical stability, and bioavailability. LPCs vary in their structural features, including the number and position of phenolic hydroxyl, ketone, and aliphatic groups, which results in different molecular, physicochemical, and gastrointestinal properties. In this study, we examined the impact of plant-based carrier oils (coconut, sunflower, and flaxseed oils) and LPC type (curcumin, resveratrol, and quercetin) on the in vitro gastrointestinal fate of polyphenols loaded into quillaja saponin-stabilized nanoemulsions. Coconut oil contains high levels of medium-chain saturated fatty acids (MC-SFAs), sunflower oil contains high levels of long-chain monounsaturated fatty acids (LC-MUFAs), and flaxseed oil contains high levels of long-chain polyunsaturated fatty acids (LC-PUFAs). The encapsulation efficiency and gastrointestinal stability of the LPCs were slightly lower in the MC than the LC oils. Differences in the gastrointestinal stability of the three LPCs were linked to differences in their oil-water partition coefficients. Some of the LPCs inhibited lipid digestion for certain oil types. In particular, resveratrol retarded the digestion of all three oils, but it still had the highest GIT stability and bioaccessibility. This study provides valuable information about the gastrointestinal fate of LPC-loaded nanoemulsions and highlights important differences in the behavior of LPCs with different characteristics. This knowledge may facilitate the design of more effective plant-based delivery systems for bioactive lipophilic polyphenols.

Tea polyphenols encapsulated in W/O/W emulsions with xanthan gum-locust bean gum mixture: Evaluation of their stability and protection.

Herein, improvement of the stability of the water-in-oil-in-water (W/O/W) emulsions by addition of xanthan gum (XG)/locust bean gum (LBG) mixture in the inner water phase was aimed. The impact of XG/LBG mixture on the physical stability, microstructure and rheological properties of W/O/W emulsions was investigated. It was found that, compared with the control emulsions, the presence of XG/LBG mixture could improve the stability of W/O/W emulsions against coalescence. The tea polyphenols (TPPs) and XG/LBG mixture were simultaneously included in the internal aqueous phase of the double emulsion and stored at 25 and 40 °C in the dark for 28 d. The results showed that XG/LBG mixture not only had a protective role for TPPs encapsulated in the internal water phase, but also maintained more than 50% of the antioxidant capacity of TPPs.

Fabrication and characterization of double (W1/O/W2) emulsions loaded with bioactive peptide/polysaccharide complexes in the internal water (W1) phase for controllable release of bioactive peptide.

The objective of this study was to develop food-grade double emulsions containing bioactive peptide (BP)/polysaccharide (P) complexes and to investigate their thermal stability (e.g., BP release) at different temperatures. The BP/P complexes were formed via electrostatic interactions, and successfully encapsulated into the internal water phase of double emulsions with different oil phases. All emulsions clearly showed temperature dependence during storage. BP/P complex-loaded double emulsions showed higher thermal stability and lower release of encapsulated BP (45 °C: < 1%, 65 °C: < 30%) over time, which effectively prevented BP release within the emulsion system. For the effect of the oil phase, the BP released from double emulsions was in the order of MCT > coconut > canola oil. Thus, we concluded that BP release can be controlled in double emulsions by differently charged polysaccharides and oil types and that BP/P-loaded double emulsions can be utilized as functional ingredients for developing heat-sensitive food products.

Characteristics of rice starch film blended with sugar (trehalose/allose) and oil (canola oil/coconut oil): Part I - Filmogenic solution behavior and mechanical properties.

The concentrations effects of sugars (trehalose and allose) and oils (canola and coconut oil) on the characteristics of rice starch suspension and mechanical properties of rice starch film were studied. The samples were prepared using 3% (w/w) rice starch, with 10% or 30% (w/w) sugar (trehalose or allose) added and 10% or 30% (w/w) oil (canola or coconut). The droplet size of the film suspension increased with increasing oil concentration both in trehalose and allose, which blended with oil. The flow behavior of the film suspensions showed shear-thinning behavior as calculated by the Power Law model. The apparent viscosity tended to increase with the addition of sugar and oil. The breaking stress of the films blended with sugar and oil was less than that of control. On preparation day and after 7 days' storage, the breaking strain tended to increase more with the addition of coconut oil than with that of canola oil. However, breaking stress and breaking strain decreased after 28 days' storage. Adding sugar had correlation with mechanical properties whereas adding oil had correlation with film suspension characteristics, allowed the sugar and oil to interact and inhibited starch chain mobility due to concentration, sugar type, and oil type. PRACTICAL APPLICATION: Trehalose, allose, canola oil, and coconut oil could be used as a plasticizer in a starch edible/biodegradable film system. The preparation process of filmogenic solution was depended on the combination of sugar and oil that could change the flow behavior and affected the mechanical properties of the edible film. The sugar and oil might improve the mechanical properties of the film by a hydroxyl group of sugar and lubricating properties of the oil.

Solubility of Pharmaceutical Ingredients in Natural Edible Oils.

Natural edible oils (NEOs) are common excipients for lipid-based formulations. Many of them are complex mixtures comprising hundreds of different triglycerides (TGs). One major challenge in developing lipid-based formulations is the variety in NEO compositions affecting the solubility of active pharmaceutical ingredients. In this work, solubilities of indomethacin (IND), ibuprofen (IBU), and fenofibrate (FFB) in soybean oil and in coconut oil were measured via differential scanning calorimetry, high-performance liquid chromatography, and Raman spectroscopy. Furthermore, this work proposes an approach that mimics NEOs using one key TG and models the API solubilities in these NEOs based on perturbed-chain statistical associating fluid theory (PC-SAFT). Key TGs were determined using the 1,2,3-random hypothesis, and PC-SAFT parameters were estimated via a group-contribution method. Using the proposed approach, the solubility of IBU and FFB was modeled in soybean oil and coconut oil. Furthermore, the solubilities of five more APIs (IND, cinnarizine, naproxen, griseofulvin, and felodipine) were modeled in soybean oil. All modeling results were found in very good agreement with the experimental data. The influence of different NEO kinds on API solubility was examined by comparing FFB and IBU solubilities in soybean oil and refined coconut oil. PC-SAFT was thus found to allow assessing the batch-to-batch consistency of NEO batches in silico.

Physicochemical characterization, fatty acid profile, antioxidant activity and antibacterial potential of cacay oil, coconut oil and cacay butter.

The Amazon region is rich in genetic resources such as oilseeds which have potentially important local commercial exploitation. Despite its high concentration of bioactive compounds, cacay (Caryodendron orinocense Karst.) oil is poorly investigated and explored. Thus, this study focuses on the physicochemical characterization (moisture, density, and saponification, iodine, and acidity values), fatty acid composition as determined by gas chromatograph mass spectrometry (GC/MS), total phenolic content (TPC), and antioxidant activity (DPPH and ABTS radical scavenging assay) of cacay oil, coconut oil and a coconut/cacay oil blend, also known as cacay butter. The antibacterial activity of cacay oil was additionally evaluated. Our study demonstrated that cacay oil presents a high amount of polyunsaturated fatty acid (PUFA) (58.3%) with an emphasis on linoleic acid and a lower acidity value (2.67 ± 0.01 cg I2/g) than butter and coconut oil, indicating a low concentration of free fatty acids. In contrast, cacay butter and coconut oil presented higher saturated fatty acid percentages (69.1% and 78.4%, respectively) and higher saponification values (242.78 and 252.22 mg KOH/g, respectively). The samples showed low moisture and relative density between 912 and 916 kg/m3. The hydrophilic fraction of cacay oil was highlighted in the quantification of TPC (326.27 ± 6.79 mg GAE/kg) and antioxidant capacity in vitro by DPPH radical scavenging assay (156.57 ± 2.25 µmol TE/g). Cacay oil inhibited the growth of Bacillus cereus (44.99 ± 7.68%), Enterococcus faecalis (27.76 ± 0.00%), and Staphylococcus aureus (11.81 ± 3.75%). At long last, this is the first study reporting the physicochemical characterization and bioactive properties of cacay butter. Coconut oil and cacay butter showed great oxidative stability potential due to higher contents of saturated fatty acids. Moreover, cacay oil presents as an alternative source of raw materials for cosmetic and biotechnology industries due to its high concentration of PUFA and for being a rich source of phenolic compounds.

Effect of vegetable oils on the experimental infection of mice with Trypanosoma congolense.

Vegetable oils are frequently used as solvents for lipophilic materials; accordingly, the effects of their components should be considered in animal experiments. In this study, the effects of various vegetable oils on the course of Trypanosoma congolense infection were examined in mice. C57BL/6J mice were orally administered four kinds of oils (i.e., coconut oil, olive oil, high oleic safflower oil, and high linoleic safflower oil) with different fatty acid compositions and infected with T. congolense IL-3000. Oil-treated mice infected with T. congolense showed significantly higher survival rates and lower parasitemia than those of control mice. Notably, coconut oil, which mainly consists of saturated fatty acids, delayed the development of parasitemia at the early stage of infection. These results indicated that vegetable oil intake could affect T. congolense infection in mice. These findings have important practical implications; for example, they suggest the potential effectiveness of vegetable oils as a part of the regular animal diet for controlling tropical diseases and indicate that vegetable oils are not suitable solvents for studies of the efficacy of lipophilic agents against T. congolense.

Techno-biofunctionality of mangostin extract-loaded virgin coconut oil nanoemulsion and nanoemulgel.

Techno-biofunctional characteristics of nanoemulsion and (nano)emulgel loaded with mangostin extracts were elucidated. Crude mangostins from mangosteen peels recovered by virgin coconut oil (VCO), mixed VCO and propylene glycol (PG), and pure PG were used. The extracts were loaded in the dispersed phase in the presence of mixed surfactants (Tween20/Span20) with a varying hydrophilic-lipophilic balance (HLB) from 10.2 to 15.1. Results showed that globular and uniformly distributed droplets of the nanoemulsion were observed. The small particle sizes (typically 18-62 nm) with the zeta potential of -39 to -54.5 mV were obtained when mixed emulsifiers with HLB values of 12.6 and 15.1 were employed. With HLB values of 12.6 and 15.1, nanoemulsions loaded with mangostin extracts prepared with mixed VCO-PG and pure PG-based extracts showed approximately a 2 to 3-fold lower droplet size diameter when compared with the VCO-based extract. For the stability test, all nanoemulsions were stable over three freeze-thaw cycles with some changes in pH, zeta potential, and droplet size. The DPPH● scavenging activity, H2O2 scavenging activity, reducing power and antibacterial activities (E. coli and S. aureus) of the nanoemulsions were greater than their corresponding bulk extracts. Nanoemulgels produced by embedding the nanoemulsions in a hydrogel matrix was homogeneous and creamy yellow-white in appearance. The nanoemulgels had a higher mangostin release (87-92%) than their normal emulgels (74-78%). Therefore, this study presented the feasibility of nanoemulsions and nanoemulgels loaded with mangostin extracts as a promising delivery system for bioactive polyphenol in food supplements, pharmaceuticals and cosmetics.

Chain length of dietary fatty acids determines gastrointestinal motility and visceromotor function in mice in a fatty acid binding protein 4-dependent manner.

PURPOSE: We hypothesize that different types of dietary fatty acids (FAs) affect gastrointestinal (GI) motility and visceromotor function and that this effect can be regulated by the fatty acid binding protein 4 (FABP4). METHODS: Mice were fed for 60 days with standard diet (STD), STD with 7% (by weight) coconut oil, rich in medium-chain FAs (MCFAs) (COCO), or with 7% evening primrose oil, rich in long-chain FAs (LCFAs) (EPO). In each group, half of the mice received FABP4 inhibitor, BMS309403 (1 mg/kg; i.p.) twice a week. Body weight (BW) and food intake were measured; well-established tests were performed to characterize the changes in GI motility and visceral pain. White adipose tissue and colonic samples were collected for cell culturing and molecular studies. RESULTS: COCO significantly increased GI transit, but not colonic motility. COCO and EPO delayed the onset of diarrhea, but none affected the effect of loperamide. EPO reduced BW and increased the visceromotor response (VMR) to colorectal distension (CRD). COCO and EPO reduced differentiation of preadipocytes. Treatment with BMS309403: (1) reversed the effects induced by COCO in physiological conditions and in mouse models of diarrhea; (2) prevented the effects of EPO on BW, VMR to CRD and castor oil-induced diarrhea; (3) affected proliferation of preadipocytes; (4) changed the expression of Fabp4 in colonic and adipocyte samples from COCO and EPO. CONCLUSION: Modifying dietary intake of MCFAs and LCFAs may be used to control GI motility or visceral pain and thus modulate the symptoms of functional GI disorders. The effect is dependent on the expression of FABP4.

Direct infusion electrospray ionisation mass spectrometry applied in the detection of adulteration of coconut oil with palm kernel oil.

Coconut oil has properties that are beneficial to human health. It assists in reducing total cholesterol, triacylglycerol (TAG), phospholipids, low-density lipoprotein (LDL) cholesterol, and very low-density lipoprotein (VLDL) cholesterol in serum and tissues. So its production, and consequently consumption, have increased in recent years. However, it has been a target for intentional adulteration with lower priced oils and fats, such as soybean oil and palm kernel oil (PKO). Coconut oil (CO) and PKO have similar chemical and physical characteristics that make it difficult to verify adulteration of CO with PKO. This study demonstrates a simple, sensitive, and fast technique that uses direct infusion electrospray ionisation mass spectrometry (ESI-MS) in conjunction with principal component analysis (PCA), in order to detect CO adulterated with PKO. Among the seven commercial coconut oil samples analysed, three were adulterated with PKO. Therefore, the suggested direct infusion ESI-MS method can be used in routine analysis to guarantee the quality of coconut oil.

The cytotoxic, inflammatory and oxidative potential of coconut oil-substituted diesel emissions on bronchial epithelial cells at an air-liquid interface.

Diesel emissions contain high levels of particulate matter (PM) which can have a severe effect on the airways. Diesel PM can be effectively reduced with the substitution of diesel fuel with a biofuel such as vegetable oil. Unfortunately, very little is known about the cellular effects of these alternative diesel emissions on the airways. The aim of this study was to test whether coconut oil substitution in diesel fuel reduces the adverse effect of diesel emission exposure on human bronchial epithelial cells. Human bronchial epithelial cells were cultured at air-liquid interface for 7 days and exposed to diesel engine emissions from conventional diesel fuel or diesel fuel blended with raw coconut oil at low (10%), moderate (15%) and high (20%) proportions. Cell viability, inflammation, antioxidant production and xenobiotic metabolism were measured. Compared to conventional diesel, low fractional coconut oil substitution (10% and 15%) reduced inflammation and increased antioxidant expression, whereas higher fractional coconut oil (20%) reduced cell viability and increased inflammation. Therefore, cellular responses after exposure to alternative diesel emission are dependent on fuel composition.

The Fatty Acid Composition of Vegetable Oils and Their Potential Use in Wound Care.

OBJECTIVE: To evaluate the similarities among fatty acid compositions of vegetable oils sold in the Brazilian market and those present in a reference health product used to treat wounds. METHODS: The relative amounts of fatty acids in 21 types of vegetable oils, purchased in the Brazilian market, were assessed using gas chromatography-mass spectrometry and flame ionization detection. MAIN RESULTS: The studied oils had similar fatty acid compositions to the reference product (caprylic acid, 18.8%; capric acid, 17.4%; oleic acid, 27.5%; and linoleic acid, 28.1%). The presence of caprylic acid (10.45% ± 0.07%), capric acid (5.8% ± 0.75%), lauric acid (45.63% ± 0.93%), and myristic acid (16.33% ± 2.23%) were detected in all the vegetable oils tested. Oleic acid (52.94% ± 12.54%) was present in andiroba, avocado, canola, copaiba, olive, palm, pequi, and pracaxi oils and featured prominently in olive oil (75.8%). Linoleic acid (57.09% ± 8.47%) was present in corn, cottonseed, grapeseed, passion fruit, and sunflower oils and in mixed oils (olive with soybean and sunflower with corn and canola). CONCLUSIONS: Most of the vegetable oils tested are products of plants from tropical climates, where they are abundant and easy to cultivate. It is possible that a balanced composition of fatty acids obtained from natural sources could be an effective alternative treatment for wounds.

Chemometric studies of the effects of milk fat replacement with different proportions of vegetable oils in the formulation of fat-filled milk powders: Implications for quality assurance.

Bovine milk lipids can be replaced with cheaper indigenous vegetable oils to produce milk alternatives with healthier saturated/unsaturated fat balance for those in areas where milk supply is poor or even absent. A wide range of vegetable oils can be used, but their impacts when blended with skimmed milk powder to formulate filled milk powder (FMP) are still unknown. We investigate the baseline variances in 12 types of FMP produced onsite with 3 proportions (10%, 20% and 30%) of 4 different vegetable oils (i.e., coconut, palm, soya-bean and sunflower) using fatty acid- and near infrared spectra profiles. Chemometric analyses revealed 8 significant overlapping clusters of FMP types but 100% classification efficiency was achieved. Sunflower oil, and particularly soya-bean FMP types had statistically the lowest indices of atherogenicity and thrombogenicity. This appears to be the first chemometrics study of FMP; the spectral analytical models used may be effective for product monitoring.

Structure of intermediate filament assembly in hair deduced from hydration studies using small-angle neutron scattering.

Intermediate filaments (IFs) are ubiquitous in biological structures including hair. Small-angle neutron scattering (SANS) data from hydrated samples were used in this study to investigate the distribution of water in hair, and model the structure of the IF assembly. A main diffraction peak at a d-spacing of ∼90 Å, and two weaker reflections show that IFs are arranged in a ∼105 Šquasi-hexagonal lattice. Changes in the diffraction peaks show that only a small fraction of the water absorbed by hair enters between the IFs, and little water diffuses into the core of the IFs. The amount of water in the IF assembly increases rapidly up to 10% relative humidity (RH), and then slowly with further increase in RH. Most of the water appears to reside outside the IF assembly, in the voids and at the interfaces, and contribute to the central diffuse scattering. The IF assembly in the decuticled hair absorbs more water and is more ordered than that the native hair. This suggests that cuticle acts as a barrier, and might constrain the structure by compressing the cortex radially. Treatments with oils that are hydrophobic, heat treatment, and reduction of the S-S linkages that opens up the matrix by disulfide bond cleavage, all affect structure and water permeability. Coconut oil was found to impede hydration more than the soybean oil because of its ability to penetrate deeper into hair. A new model for the IF assembly that is sterically more favorable than the previous models is proposed.