Screening and identification of a strain of Aureobasidium pullulans and its application in potato starch industrial waste.

Pullulan and melanin have become important secondary metabolites that are now widely studied. In this study, a strain of Aureobasidium pullulans HIT-LCY3T was used to ferment potato starch industrial waste to produce pullulan and melanin. After optimization, the culture conditions for the fermentation medium were obtained: inoculum age of 48 h, initial pH of 6.0, inoculation quantity of 1.5%, temperature of 26 °C, fermentation time of 5 d and speed of 160 rpm. Under these conditions, the yield of pullulan was 23.47 g/L with a molecular weight (MW) of 1.21 × 106 Da and the yield of melanin was 18.98 g/L. In addition, the adaptive evolution could significantly increase the yield of pullulan and melanin and the air-floating fermenters was more conductive to product accumulation. Through the 5 L small-scale test and 1000 L pilot test, the yield of pullulan reached 16.52 g/L with molecular weight of 0.92 × 106 Da and the yield of melanin was 12.08 g/L at the trial production of 30,000 L. This work could provide strong support for industrial production and new guidance for waste utilization and environmental protection.

Evaluation of enhancing effect of soybean oil on polymalic acid production by Aureobasidium pullulans HA-4D.

Polymalic acid (PMA) is a water-soluble polyester produced by Aureobasidium pullulans. In this study, the physiological response of A. pullulans after the addition of vegetable oils was investigated. Soybean oil (SBO) is pivotal for shortening fermentation time and achieving high PMA titer. With the addition of 1% (w/v) SBO, the titer and productivity of PMA was, respectively, increased by 34.2% and 80%. SBO acted as a chemical stimulatory agent rather than a carbon source, the enhancement on PMA production was attributed to the component of fatty acid. SBO induced the dimorphism (yeast-like cells and mycelia) of A. pullulans, in vitro enzyme activities indicated that the TCA oxidative branch for malic acid synthesis might be strengthened, which could generate more ATP for PMA synthesis, and the assay of intracellular energy supply validated this deduction. This study provided a new sight for recognizing the regulatory behavior of SBO in A. pullulans.

Beneficial effects of novel aureobasidium pullulans strains produced beta-1,3-1,6 glucans on interleukin-6 and D-dimer levels in COVID-19 patients; results of a randomized multiple-arm pilot clinical study.

OBJECTIVE: In this pilot clinical study, we report the beneficial effects of beta glucans derived from two strains AFO-202 and N-163 of a black yeast Aureobasidium pullulans on the biomarkers for cytokine storm and coagulopathy in COVID-19 patients. METHODS: A total of 24 RT-PCR positive COVID-19 patients were recruited and randomly divided into three groups (Gr): Gr. 1 control (n = 8) - Standard treatment; Gr. 2: Standard treatment + AFO-202 beta glucan (n = 8); and Gr. 3, Standard treatment + combination of AFO-202 and N-163 beta glucans (n = 8) for 30 days. RESULTS: There was no mortality or requirement of ventilation of the subjects in any of the groups. There was a decrease in D-Dimer values (751 ng/ml to 143.89 ng/ml) and IL-6 values (7.395-3.16 pg/ml) in Gr. 1 in 15 days but the levels increased to abnormal levels on day 30 (D-Dimer: 202.5 ng/ml; IL-6 55.37 pg/ml); which steadily decreased up to day 30 in groups 2 (D-dimer: 560.99 ng/dl to 79.615; IL-6: 26.18-3.41 pg/ml) and 3 (D-dimer: 1614 ng/dl to 164.25 ng/dl; IL-6: 6.25-0.5 pg/ml). The same trend was observed with ESR. LCR and LeCR increased while NLR decreased significantly in Gr. 3. CD4 + and CD8 + T cell count showed relatively higher increase in Gr.3. There was no difference in CRP within the groups. CONCLUSION: As these beta glucans are well known food supplements with a track record for safety, larger multi-centric clinical studies are recommended to validate their use as an adjunct in the management of COVID-19 and the ensuing long COVID-19 syndrome.

Characterisation of selenium and tellurium nanoparticles produced by Aureobasidium pullulans using a multi-method approach.

Aureobasidium pullulans was grown in liquid culture media amended with selenite and tellurite and selenium (Se) and tellurium (Te) nanoparticles (NPs) were recovered after 30 d incubation. A separation method was applied to recover and characterise Se and Te NPs by asymmetric flow field flow fractionation (AF4) with online coupling to multi-angle light scattering (MALS), ultraviolet visible spectroscopy (UV-Vis), and inductively coupled plasma mass spectrometry (ICP-MS) detectors. Additional characterisation data was obtained from transmission electron microscopy (TEM), and dynamic light scattering (DLS). Solutions of 0.2% Novachem surfactant and 10 mM phosphate buffer were compared as mobile phases to investigate optimal AF4 separation and particle recovery using Se-NP as a model sample. 88% recovery was reported for 0.2% Novachem solution, compared with 50% recovery for phosphate buffer. Different crossflow (Cflow) rates were compared to further investigate optimum separation, with recoveries of 88% and 30% for Se-NPs, and 90% and 29% for Te-NPs for 3.5 mL min-1 and 2.5 mL min-1 respectively. Zeta-potential (ZP) data suggested higher stability for NP elution in Novachem solution, with increased stability attributed to minimised NP-membrane interaction due to PEGylation. Detection with MALS showed monodisperse Se-NPs (45-90 nm) and polydisperse Te-NPs (5-65 nm).Single particle ICP-MS showed mean particle diameters of 49.7 ±â€¯2.7 nm, and 135 ±â€¯4.3 nm, and limit of size detection (LOSD) of 20 nm and 45 nm for Se-NPs and Te-NPs respectively. TEM images of Se-NPs and Te-NPs displayed a spherical morphology, with the Te-NPs showing a clustered arrangement, which suggested electrostatic attraction amongst neighbouring particles. Particle hydrodynamic diameters (dH) measured with dynamic light scattering (DLS) further suggested monodisperse Se-NPs and polydisperse Te-NPs distributions, showing good agreement with AF4-MALS for Se-NPs, but suggests that the Rg obtained from AF4-MALS for Te-NP was unreliable. The results demonstrate a complementary application of asymmetric flow field-flow fractionation (AF4), ICP-MS, light scattering, UV-Vis detection, and microscopic techniques to characterise biogenic Se and Te NPs.

Biopolymer production by Aureobasidium mangrovei SARA-138H and its potential for oil recovery enhancement.

The world economy depends heavily on crude oil. With a conventional oil recovery process, only one-third of crude oil is extracted. Various technologies have been developed to maximize the recovery of oil resources from natural reservoirs. Polymer technology has been used in many oil fields around the world. The biopolymer pullulan, produced by some Aureobasidium species, has been used in many industrial applications, but no research has been conducted regarding its use in the microbial enhancement of oil recovery (MEOR). Here, we investigate the potential of pullulan produced by newly isolated species Aureobasidium mangrovei SARA-138H for enhancement of oil recovery. Our results indicate that under optimized conditions, that is, sucrose as the carbon source in the medium, a pH of 9, incubation at 25 °C, and 250 rpm agitation, the fungus was able to produce 10 g/L of pullulan. The maximum viscosity achieved under these conditions was 318 cP after 15 days of incubation. Pullulan solution (10 g/L) showed the ability to recover 36.7% of heavy crude oil after 34.2% of secondary oil recovery. However, diluted pullulan in brine at the ratio (1:1) resulted in the recovery of 20.23% of oil from the residual oil in the core after 22.6% of secondary oil recovery. A 20-day injectivity test revealed that pullulan passed smoothly through the core, causing no blockage. It was concluded that pullulan from A. mangrovei SARA-138H was able to increase oil recovery to a degree comparable to that achieved with many polymers used in oil fields around the world. KEY POINTS: • First report of biopolymer "pullulan" from A. mangrovie. • Optimum conditions for pullulan production were obtained. • Pullulan recovered 36.7% of heavy oil from residual oil in place, with good injectivity.

Metschnikowia bicuspidate associated with a milky disease in Eriocheir sinensis and its effectitve treatment by Massoia lactone.

The pathogenic yeast strain LIAO causing the milky disease in the Chinese mitten crab belonged to one member of Metschnikowia bicuspidate which could grow well at different temperatures from 28 to 4 °C. It was also found that the pathogenic yeast strain LIAO could grow in the extracts of the muscle, gill, heart tissues, intestinal tracts of the healthy Chinese mitten crabs by using the reducing sugars, amino acids and other nutrients in them. Massoia lactone released from liamocins produced by Aureobasidium melanogenum had high anti-fungal activity against the pathogenic yeast strain LIAO and M. bicuspidate WCY isolated from the diseased marine crabs. The minimal inhibitory concentrations (MIC) and the minimal fungicidal concentration (MFC) in the liquid culture against the pathogenic yeast strain LIAO were 0.15 mg/mL and 0.34 mg/mL, respectively. Massoia lactone as a bio-surfactant could damage the cell membrane, even break the whole cells of the pathogenic yeast strain LIAO and cause cellular necrosis of the pathogenic yeast LIAO. Therefore, Massoia lactone could be used to effectively kill the pathogenic yeast strains and as an effectitve treatment for milky disease in the Chinese mitten crab.

Influence of metals and metalloids on the composition and fluorescence quenching of the extracellular polymeric substances produced by the polymorphic fungus Aureobasidium pullulans.

Aureobasidium pullulans is a ubiquitous and widely distributed fungus in the environment, and exhibits substantial tolerance against toxic metals. However, the interactions between metals and metalloids with the copious extracellular polymeric substances (EPS) produced by A. pullulans and possible relationships to tolerance are not well understood. In this study, it was found that mercury (Hg) and selenium (Se), as selenite, not only significantly inhibited growth of A. pullulans but also affected the composition of produced EPS. Lead (Pb) showed little influence on EPS yield or composition. The interactions of EPS from A. pullulans with the tested metals and metalloids depended on the specific element and their concentration. Fluorescence intensity measurements of the EPS showed that the presence of metal(loid)s stimulated the production of extracellular tryptophan-like and aromatic protein-like substances. Examination of fluorescence quenching and calculation of binding constants revealed that the fluorescence quenching process for Hg; arsenic (As), as arsenite; and Pb to EPS were mainly governed by static quenching which resulted in the formation of a stable non-fluorescent complexes between the EPS and metal(loid)s. Se showed no significant interaction with the EPS according to fluorescence quenching. These results provide further understanding of the interactions between metals and metalloids and EPS produced by fungi and their contribution to metal(loid) tolerance. KEY POINTS: • Metal(loid)s enhanced production of tryptophan- and aromatic protein-like substances. • Non-fluorescent complexes formed between the EPS and tested metal(loid)s. • EPS complexation and binding of metal(loid)s was dependent on the tested element. • Metal(loid)-induced changes in EPS composition contributed to metal(loid) tolerance.