A review of endocrine disrupting chemicals migration from food contact materials into beverages.

A significant and pressing issue revolves around the potential human exposure to endocrine disrupting chemicals (EDCs), which pose a substantial risk primarily through contaminated beverages. However, a comprehensive review for comparison of the migration rates of EDCs into these matrixes is currently lacking. This study reviews the beverages contamination with EDCs, including phthalates (PAEs), bisphenol A (BPA), hormone-like compounds, elements, and other organic EDCs. Also, the EDCs migration into milk and other dairy products, coffee, tea, and cold beverages related to their release from contact materials, preparation components, and storage conditions are briefly summarized. The data illustrates that besides the contamination of raw materials, the presence of EDCs associated with the type of food contact materials (FCMs)and their migration rate is increased with acidity, temperature, and storage time. The highest concentration of PAEs was detected from plastic and synthetic polymer films, while BPA strongly leaches from epoxy resins and canned metal. Furthermore, the presence of elements with endocrine disrupting characteristics was confirmed in cold beverages, soft drinks, hot drink and milk. Moreover, hormone-like compounds have been found to be released from coffee preparation components. Despite the few data about the migration rate of other EDCs including UV-stabilizers, surfactants, and antibacterial compounds into beverages, their presence was reported into milk, coffee, and different beverages, especially in packed samples. Studies on the EDCs leaching have primarily focused on PAEs and BPA, while other compounds require further investigation. Regardless, the possible risk that EDCs pose to humans through beverage consumption cannot be overlooked.

Dissecting new lipids and their composition in herbal tea using untargeted LC/MS.

Herbal teas and beverages have gained global attention because they are rich in natural bioactive compounds, which are known to have diverse biological effects, including antioxidant and anticarcinogenic properties. However, the lipidomic profiles of herbal teas remain unclear. In this study, we applied an untargeted lipidomics approach using high-performance liquid chromatography coupled with linear ion trap-Orbitrap mass spectrometry to comprehensively profile, compare, and identify unknown lipids in four herbal teas: dokudami, kumazasa, sugina, and yomogi. A total of 341 molecular species from five major classes of lipids were identified. Multivariate principal component analysis revealed distinct lipid compositions for each of the herbs. The fatty acid α-linolenic acid (FA 18:3) was found to be abundant in kumazasa, whereas arachidonic acid (FA 20:4) was the most abundant in sugina. Interestingly, novel lipids were discovered for the first time in plants; specifically, short-chain fatty acid esters of hydroxy fatty acids (SFAHFAs) with 4-hydroxy phenyl nonanoic acid as the structural core. This study provides insight into the lipidomic diversity and potential bioactive lipid components of herbal teas, offering a foundation for further research into their health-promoting properties and biological significance.

Consumption Patterns of Sugar-Sweetened Beverages and Association with Undernutrition among Children Aged 9-17 Years in Guangzhou, China: A Cross-Sectional Study.

Globally, the high consumption levels of sugar-sweetened beverages (SSBs) and their effect on health have drawn significant attention. This study aimed to identify the consumption patterns of SSBs among children in rural areas of Guangzhou, China, and explore their association with undernutrition. A total of 1864 children aged 9-17 years old were included in this study. Demographics, lifestyle behaviors, and anthropometric and dietary information were collected. Factor analysis was used to identify patterns of SSBs, while nutritional status was assessed using Body Mass Index (BMI). Latent class analysis was used to establish dietary preference models. Log-binomial regression analysis was used to analyze the association between SSBs consumption patterns and undernutrition. The undernutrition prevalence in children was 14.54-19.94% in boys and 9.07% in girls. Three SSB consumption patterns were identified, including the plant protein pattern, dairy-containing pattern, and coffee pattern. Both medium-high (Q3) and the highest (Q4) scores in the dairy-containing pattern were positively associated with the risk of undernutrition, especially in boys. Furthermore, the highest scores in the plant protein pattern and coffee pattern were positively associated with the risk of undernutrition in children aged 9-10 years old. The dairy-containing pattern was a risk factor for undernutrition in children, especially for boys; the plant protein patterns and coffee patterns were risk factors for undernutrition in children aged 9-10 years old. The findings of the study can provide scientific evidence and policy recommendations for improving children's health conditions.

Facile fabrication of carbon nanotube hollow microspheres as a fiber coating for ultrasensitive solid-phase microextraction of phthalic acid esters in tea beverages.

The efficient extraction of phthalic acid esters (PAEs) is challenging due to their extremely low concentration, complicated matrices and hydrophilicity. Herein, hollow microspheres, as an ideal coating, possess significant potential for solid-phase microextraction (SPME) due to their fascinating properties. In this study, multiwalled carbon nanotube hollow microspheres (MWCNT-HMs) were utilized as a fiber coating for the SPME of PAEs from tea beverages. MWCNT-HMs were obtained by dissolving the polystyrene (PS) cores with organic solvents. Interestingly, MWCNT-HMs well maintain the morphology of the MWCNTs@PS precursors. The layer-by-layer (LBL) assembly of MWCNTs on PS microsphere templates was achieved through electrostatic interactions. Six PAEs, di-ethyl phthalate (DEP), di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-2-ethylhexyl phthalate (DEHP) and di-n-octyl phthalate (DOP), were selected as target analytes for assessing the efficiency of the coating for SPME. The stirring rate, sample solution pH and extraction time were optimized by using the Box-Behnken design. Under optimal working conditions, the proposed MWCNT-HMs/SPME was coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS) to achieve high enrichment factors (118-2137), wide linearity (0.0004-10 µg L-1), low limits of detection (0.00011-0.0026 µg L-1) and acceptable recovery (80.2-108.5%) for the detection of PAEs. Therefore, the MWCNT-HM coated fibers are promising alternatives in the SPME method for the sensitive detection of PAEs at trace levels in tea beverages.

Unveiling the presence of fluoride in commercial tea infusion: Factors influencing its release and its adsorptive elimination by indigenously developed nanoadsorbents.

Drinking tea, which is globally one of the most widely consumed beverages, is a potential source of fluoride toxicity. This research aimed at fluoride estimation in the infusions of commercial black tea and green tea samples, purchased from the local Indian market, systematic evaluation of the factors influencing the fluoride release and the adsorptive removal of fluoride using the indigenously developed nanoadsorbents. All the prepared infusions had fluoride content above the permissible WHO limits. Various factors, which affect the release of fluoride from tea leaves into the infusion include type of water, tea dosage and brewing time. The investigations revealed that, the fluoride content in the black tea infusions was much higher than the green tea infusions. Further, it also depended on the amount of tea leaves used for brewing. The fluoride, present in tea leaves, is released gradually and within just 1 min of brewing, the concentration of fluoride in the infusions was well above the permissible WHO limits. It was also observed that, the dried unprocessed tea leaves, when brewed in water, had high fluoride content. This further confirmed the presence of fluoride in tea infusion, which demands an efficient remediation technique. The developed nanoadsorbents exhibited efficient defluoridation of groundwater, and were therefore tested for their efficiency in defluoridating tea infusions as well. These nanoadsorbents could efficiently eliminate fluoride from both green and black tea infusions, bringing down the fluoride content below the WHO limits, thereby rendering the infusions safe. They exhibited rapid kinetics with high efficiency in adsorbing fluoride from tea infusions. These properties make them potential adsorbents for defluoridating tea infusion, which provides a probable solution to the problem of fluoride toxicity from drinking tea. This is one of the first reports on a technique for eliminating fluoride from tea infusions.

Ultrasensitive determination of selenium in food samples and its speciation in water and beverages using thiosemicarbazide-incorporated graphene and total-reflection X-ray fluorescence spectrometry.

The paper presents a new analytical procedure for the determination and speciation of trace and ultratrace selenium in water, beverages, seafood, milk, and vegetables. The developed method is based on the dispersive micro-solid phase extraction with the use of new thiosemicarbazide-incorporated graphene as a solid sorbent, in combination of the total-reflection X-ray fluorescence spectrometry (TXRF). As a result, we have created an auspicious analytical tool for fast and sensitive analysis of samples with a complex matrix. Regardless of the specimen type, the method is characterized by a very low detection limit of 1.7 pg mL-1 and high precision. The developed strategy allowed us to solve common problems associated with selenium loss during the sample preparation for the TXRF measurement and also improve its performance toward the analysis of beverages and high saline/solid samples, which may even be impossible to perform using standard sample preparation procedures for a TXRF measurement.

Enrichment of a fruit-based smoothie beverage with omega-3 fatty acids from microencapsulated chia seed oil.

BACKGROUND: Omega-3 fatty acids are known for their various health benefits. Chia is the richest vegetable source of omega-3 fatty acids. However, its oil is highly susceptible to oxidative deterioration and should be protected for incorporation into food matrices. This work aimed to study the incorporation of different chia oil microcapsules in a powdered beverage, analyzing the effect on the physicochemical characteristics and stability during storage. RESULTS: Different types of microcapsules were obtained: monolayer microcapsules using sodium caseinate and lactose as wall material, and multilayer microcapsules produced through electrostatic deposition using lecithins, chitosan, and chia mucilage as the first, second, and third layers, respectively. The results demonstrated an efficient enrichment of smoothies, with omega-3 fatty acid values ranging from 24.09% to 42.73%, while the original food matrix powder lacked this component. These powder beverages exhibited low moisture content (≤ 2.91%) and low water activity (≤ 0.39). The aerated, packed density and compressibility assays indicated that adding microcapsules made the powders less dense and compressible. The color of the original powdered beverage was not modified. The dispersibility reflected an acceptable instantaneity, reaching the maximum obscuration after 30 s of stirring. The solubility of all the enriched products was higher than 70%, whereas the pH was ~6.8. The contact angle between the powder and liquid indicated an excellent ability to be reconstituted in water. The analysis of the glass transition temperature showed that the storage temperature (25 °C) was adequate. The peroxide value of all the products was low throughout the storage (≤ 1.63 meq peroxide kg-1 of oil at 90 days at 25 ± 2 °C), thus maintaining the quality of the microencapsulated chia oil. CONCLUSIONS: The results suggest that incorporating the monolayer and multilayer chia oil microcapsules that were studied could be a viable strategy for enriching smoothies with the omega-3 fatty acids present in chia seed oil. © 2023 Society of Chemical Industry.

Understanding the effect of fermentation time on physicochemical characteristics, sensory attributes, and volatile compounds in green tea kombucha.

Kombuchas are a trend in the fermented beverage field and the effect of fermentation time on their characteristics is necessary to better understand the process, mainly concerning volatile compounds, which are scarce information in the current literature. Thus, the present work aimed to evaluate the features of green tea kombucha during fermentation, monitoring the changes in pH, acidity, turbidity, polyphenols, ethanol, acetic acid, volatile compounds, and sensory profile and acceptance up to 14 days of fermentation. Kombuchas' pH and acidity decreased through time as expected, but after 4 days of fermentation, the beverage exceeded the Brazilian legal limits of acidity (130 mEq/L) and produced more than 0.5% AVB, which labels the beverage as alcoholic. Total polyphenols and condensed tannins content enhanced until the seventh day of fermentation and remained constant. Fermentation highly impacted the aroma of the infusion with a high formation of volatile acids, such as alcohols, esters, and ketones. Aldehydes were degraded during the bioprocess. Sensory characterization of kombucha showed that fermentation of 4 days increased perceived turbidity; vinegar, citric fruit, acid, and alcoholic aroma; and produced the beverage with sour, bitter, and vinegar flavor. Thus, the fermentation time of kombuchas must be controlled as they rapidly change and impact on the physicochemical parameters and sensory profile of the beverage can be negative.

Bioavailability of bioactive compounds in Hibiscus sabdariffa beverage as a potential anti-inflammatory.

The absorption and metabolism of bioactive compounds (BCs) in a Hibiscus sabdariffa drink (HbD) were evaluated by the in vivo bioavailability of organic acids (OA) and phenolic compounds (PC's). An acute single-blind clinical study in humans was conducted. Twelve volunteers consumed a HbD and a control drink (CD). Urine and plasma samples were taken after consuming both beverages. OA and PC's of the beverages (HbD and CD) and the biological samples (urine and plasma) were characterized by HPLC-DAD-MS. Thirthy-eight compounds in HbD and four CD were detected and quantified, equivalent to 937.37 mg and 1.22 mg per 60 mL, respectively. Hibiscus acid was the most abundant OA in both drinks. Additionally, hydroxycinnamic acids, flavonoids, anthocyanins, and anthocyanidins were also detected in HbD, although their amount represented 10% of the total BCs. 25 different metabolites were identified, 15 in urine and 23 in plasma. The microbiota extensively biotransformed PCs and their amount was lower than organic acids, particularly hibiscus acid and hydroxycitric acid. The colonic metabolites derived from PCs and organic acids would be behind the anti-inflammatory bioactivity described for Hibiscus sabdariffa L. (Malvaceae family). However, further studies are necessary to evaluate the metabolites responsible for their anti-inflammatory activity.

The Content of Bioactive Compounds and Technological Properties of Matcha Green Tea and Its Application in the Design of Functional Beverages.

Matcha is a powdered green tea obtained from the Camellia sinensis L. plant intended for both "hot" and "cold" consumption. It is a rich source of bioactive ingredients, thanks to which it has strong antioxidant properties. In this research, an organoleptic evaluation was carried out, and the physical characteristics (i.e., instrumental color measurement (L*a*b*), water activity, water solubility index (WSI), water holding capacity (WHC) of 10 powdered Matcha green teas, and in the 2.5% Matcha water solutions, pH, °Brix and osmolality were tested. Also, the content of phenolic ingredients, i.e., selected phenolic acids, flavonoids and total polyphenols, was assessed. The content of chlorophyll, vitamin C and antioxidant potential were also examined. Matcha M-4 was used to design two functional model beverages, in the form of ready-to-use powdered drinks, consisting of Matcha green tea, protein preparations, inulin, maltodextrin and sugar. The obtained powdered drink, when dissolved in the preferred liquid (water, milk, juice), is regenerative, high-protein and rich in bioactive ingredients from the Matcha drink, with prebiotic properties derived from the added inulin. The beverage is also characterized by low osmolality. It can be recommended as a regenerating beverage for a wide group of consumers, athletes and people with deficiencies, among others protein, and elderly people, as well as in the prevention and supportive treatment of bone and joint tissue diseases.

Advanced mass spectrometry profiling of phenolic and minerals compounds in herbal beverages.

The global pandemic of COVID-19 has led to an increased interest in herbal infusions as natural remedies since 2020. This has also heightened the need for controlling the composition of these dietary supplements to ensure consumer health and prevent food fraud. In the present work, various mass spectrometry techniques were used to analyze the organic and inorganic composition of 23 herbal infusion samples. UHPLC-ESI-QTOF-MS was used to determine target, suspect, and nontarget polyphenolic compounds. Thus, 8 phenolic compounds were identified in the target analysis and additionally, 80 extra-compounds were identified through suspect and nontargeted screening. ICP-MS was used to monitor the metals released during tea leaf infusion, providing a complete mineral composition of each sample. Principal Component Analysis (PCA) and Discriminant Analysis (DA) were utilized to identify relevant compounds for differentiating and grouping the samples, thus serving as specific markers to detect potential food fraud.

A systematic review and meta-analysis of validated analytical techniques for the determination of total selenium in foods and beverages.

The intricate balance between the beneficial and harmful effects of selenium (Se) intake means that its quantification in food needs to be done correctly. Therefore, in this review, we systematized 105 articles to identify the most studied methodologies, analytical techniques, and food matrices. Among the analytical techniques employed, inductively coupled plasma mass spectrometry (ICP-MS) (n = 29) emerged as the most commonly used method. The most prevalent hydrolysis methodology to digest Se in food matrices involved the use of nitric acid combined with ultrasound, which improved both the yield and digestion time. Optimal recovery values were achieved when total Se quantification accounted for the sum of Se(IV) and Se(VI) (94.4-99.4%) and for SeCys (88-96.5%). These findings are relevant for advancing methodological approaches, and their results emphasize the importance of developing alternative, faster, and lower-cost protocols for Se quantification in foods and beverages.

Phenolic, Headspace and Sensory Profile, and Antioxidant Capacity of Fruit Juice Enriched with Salvia officinalis L. and Thymus serpyllum L. Extract: A Potential for a Novel Herbal-Based Functional Beverages.

Since certain constituents are not naturally present in pure fruit juices, incorporating herbal extracts can provide specific sensory properties to the beverages and improve their biopotential. In our previous research, it was found that sage (Salvia officinalis L.), wild thyme (Thymus serpyllum L.), and combinations of their extracts had the highest total phenolic content and a unique composition of volatile compounds, which can contribute to the aromatic and antioxidant qualities of functional products. Therefore, this research aimed to investigate the potential of sage and wild thyme extracts, as well as their mixture (wild thyme:sage at 3:1, v/v), to enrich fruit juices (apple, pineapple, and orange). Obtained beverages were evaluated for sensory properties as well as phenolic and headspace composition (UPLC-MS/MS and HS-SPME/GC-MS analysis) and antioxidant capacity (ORAC assay). The incorporation of wild thyme extract in pineapple juice provided the most harmonious flavor and the highest content of volatile compounds (on PDMS/DVB fiber). The orange juice formulations were the most enriched with phenolic and volatile compounds (on DVB/CAR/PDMS fibers). The highest antioxidant capacity was observed in the formulation with orange juice and sage extract (22,925.39 ± 358.43 µM TE). This study demonstrated that enriching fruit juices with sage and wild thyme extracts could create functional beverages with improved sensory and health-promoting properties, providing valuable insights for the food and beverage industry to meet the growing demand of health-conscious consumers for natural and functional products.

Changes in the chemical compositions and biological properties of kombucha beverages made from black teas and pineapple peels and cores.

Several raw materials have been used as partial supplements or entire replacements for the main ingredients of kombucha to improve the biological properties of the resulting kombucha beverage. This study used pineapple peels and cores (PPC), byproducts of pineapple processing, as alternative raw materials instead of sugar for kombucha production. Kombuchas were produced from fusions of black tea and PPC at different ratios, and their chemical profiles and biological properties, including antioxidant and antimicrobial activities, were determined and compared with the control kombucha without PPC supplementation. The results showed that PPC contained high amounts of beneficial substances, including sugars, polyphenols, organic acids, vitamins, and minerals. An analysis of the microbial community in a kombucha SCOBY (Symbiotic Cultures of Bacteria and Yeasts) using next-generation sequencing revealed that Acetobacter and Komagataeibacter were the most predominant acetic acid bacteria. Furthermore, Dekkera and Bacillus were also the prominent yeast and bacteria in the kombucha SCOBY. A comparative analysis was performed for kombucha products fermented using black tea and a fusion of black tea and PPC, and the results revealed that the kombucha made from the black tea and PPC infusion exhibited a higher total phenolic content and antioxidant activity than the control kombucha. The antimicrobial properties of the kombucha products made from black tea and the PPC infusion were also greater than those of the control. Several volatile compounds that contributed to the flavor, aroma, and beneficial health properties, such as esters, carboxylic acids, phenols, alcohols, aldehydes, and ketones, were detected in kombucha products made from a fusion of black tea and PPC. This study shows that PPC exhibits high potential as a supplement to the raw material infusion used with black tea for functional kombucha production.

Characterization of Delonix regia Flowers' Pigment and Polysaccharides: Evaluating Their Antibacterial, Anticancer, and Antioxidant Activities and Their Application as a Natural Colorant and Sweetener in Beverages.

In the present study, an attempt was made to investigate the in vitro antioxidant, anticancer, and antibacterial activities of Delonix regia, then in vivo evaluate its safety as a natural colorant and sweetener in beverages compared to synthetic colorant and sweetener in rats, then serve the beverages for sensory evaluation. Delonix regia flowers had high protein, polysaccharide, Ca, Na, Mg, K, and Fe contents. The Delonix regia pigment extract (DRPE) polysaccharides were separated and purified by gel permeation chromatography on Sephacryl S-200, characterized by rich polysaccharides (13.6 g/L). The HPLC sugar profile detected the monosaccharides in the extracted polysaccharides, composed of mannose, galactose, glucose, arabinose, and gluconic acid, and the structure of saccharides was confirmed by FTIR, which showed three active groups: carbonyl, hydrocarbon, and hydroxyl. On the other hand, the red pigment constituents of DRPE were detected by HPLC; the main compounds were delphinidin and cyanidin at 15 µg/mL. The DRPE contained a considerable amount (26.33 mg/g) of anthocyanins, phenolic compounds (64.7 mg/g), and flavonoids (10.30 mg/g), thus influencing the antioxidant activity of the DRPE, which scavenged 92% of DPPH free radicals. Additionally, it inhibited the population of pathogenic bacteria, including Staphylococcus aureus, Listeria monocyogenes, Salmonella typhimurum, and Pseudomonas aeruginosa, in the range of 30-90 µg/mL, in addition to inhibiting 85% of pancreatic cancer cell lines. On the in vivo level, the rats that were delivered a diet containing DRPE showed regular liver markers (AST, ALP, and ALT); kidney markers (urea and creatinine); high TP, TA, and GSH; and low MDA, while rats treated with synthetic dye and aspartame showed higher liver and kidney markers; lowered TP, TA, and GSH; and high MDA. After proving the safety of DRPE, it can be safely added to strawberry beverages. Significant sensorial traits, enhanced red color, and taste characterize the strawberry beverages supplemented with DRPE. The lightness and redness of strawberries were enhanced, and the color change ΔE values in DRPE-supplemented beverages ranged from 1.1 to 1.35 compared to 1.69 in controls, indicating the preservative role of DRPE on color. So, including DRPE in food formulation as a natural colorant and sweetener is recommended for preserving health and the environment.

Stability of labile xanthones and dihydrochalcones in a ready-to-drink honeybush beverage during storage.

BACKGROUND: The shelf-life of a functional herbal tea-based beverage is important not only for consumer acceptability, but also for the retention of bioactive compounds. The present study aimed to clarify the role of common iced tea beverage ingredients (citric and ascorbic acids) on the shelf-life stability of an herbal tea-based beverage. A hot water extract of green Cyclopia subternata, also used as honeybush tea, was selected as the main ingredient because it provides different types of phenolic compounds associated with bioactive properties (i.e. xanthones, benzophenones, flavanones, flavones and dihydrochalcones). RESULTS: The model solutions were stored for 180 and 90 days at 25 and 40 °C, respectively. Changes in their volatile profiles and color were also quantified as they contribute to product quality. 3',5'-Di-ß-d-glucopyranosyl-3-hydroxyphloretin (HPDG; dihydrochalcone) and, to a lesser extent, mangiferin (xanthone), were the most labile compounds. Both compounds were thus identified as critical quality indicators to determine shelf-life. The stability-enhancing activity of the acids depended on the compound; ascorbic acid and citric acid enhanced the stability of HPDG and mangiferin, respectively. However, when considering all the major phenolic compounds, the base solution without acids was the most stable. This was also observed for the color and major volatile aroma-active compounds [α-terpineol, (E)-ß-damascenone, 1-p-menthen-9-al and trans-ocimenol]. CONCLUSION: The addition of acids, added for stability and taste in ready-to-drink iced tea beverages, could thus have unwanted consequences in that they could accelerate compositional changes and shorten the shelf-life of polyphenol-rich herbal tea beverages. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

A robust and ultra-high-surface hydrogen-bonded organic framework promoting high-efficiency solid phase microextraction of multiple persistent organic pollutants from beverage and tea.

Persistent organic pollutants (POPs) are widely distributed in the environment and are toxic, even at low concentrations. In this study, we first used hydrogen-bonded organic framework (HOF) to enrich POPs, based on solid phase microextraction (SPME). The HOF called PFC-1 (self-assembled by 1,3,6,8-tetra(4-carboxylphenyl)pyrene) has an ultra-high specific surface area, excellent thermochemical stability, and abundant functional groups, making it potential to be an excellent coating in SPME. And the as-prepared PFC-1 fiber have demonstrated outstanding enrichment abilities for nitroaromatic compounds (NACs) and POPs. Furthermore, the PFC-1 fiber was coupled with gas chromatography-mass spectrometry (GC-MS) to develop an ultrasensitive and practical analytical method with wide linearity (0.2-200 ng·L-1), low detection limits for organochlorine pesticides (OCPs) (0.070-0.082 ng·L-1) and polychlorinated biphenyls (PCBs) (0.030-0.084 ng·L-1), good repeatability (6.7-9.9%), and satisfactory reproducibility (4.1-8.2%). Trace concentrations of OCPs and PCBs in drinking water, tea beverage, and tea were also determined precisely with the proposed analytical method.

A review of recent compound-specific isotope analysis studies applied to food authentication.

Compound-specific stable isotope analysis (CSIA) of food products is a relatively new and novel technique used to authenticate food and detect adulteration. This paper provides a review of recent on-line and off-line CSIA applications of plant and animal origin foods, essential oils and plant extracts. Different food discrimination techniques, applications, scope, and recent studies are discussed. CSIA δ13C values are widely used to verify geographical origin, organic production, and adulteration. The δ15N values of individual amino acids and nitrate fertilizers have proven effective to authenticate organic foods, while δ2H and δ18O values are useful to link food products with local precipitation for geographical origin verification. Most CSIA techniques focus on fatty acids, amino acids, monosaccharides, disaccharides, organic acids, and volatile compounds enabling more selective and detailed origin and authentication information than bulk isotope analyses.. In conclusion, CSIA has a stronger analytical advantage for the authentication of food compared to bulk stable isotope analysis, especially for honey, beverages, essential oils, and processed foods.

Optimization of the Extraction of Antioxidant Compounds from Roselle Hibiscus Calyxes (Hibiscus sabdariffa), as a Source of Nutraceutical Beverages.

Secondary metabolites from Hibiscus sabdariffa have been used to prevent different diseases. Roselle Hibiscus is known for being rich in phenolic bioactive compounds. The extraction conditions are directly related to the chemical composition and then to the overall bioactivity of the extract. In this study, a Box-Behnken experimental design has been used to optimize the antioxidant activity, considering four variables: ethanol:water ratio, temperature, extraction time, and solvent:solid ratio. The experiment comprises 27 experiments and 3 repetitions at the central point. The results are described by surface response analysis and a second-degree polynomial equation. The model explains 87% of the variation in the response. The maximum antioxidant activity is yielded when 1% solids are extracted in 35.5% ethanol at 60 °C for 33 min. Finally, a nutritional functional supplement of 495 µmol Trolox Equivalent (TE) antioxidant capacity was prepared with the optimized extract.