Effects of a Curcumin/Silymarin/Yeast-Based Mycotoxin Detoxifier on Redox Status and Growth Performance of Weaned Piglets under Field Conditions.

The aim of this in vivo study was to investigate the effects of a novel mycotoxin detoxifier whose formulation includes clay (bentonite and sepiolite), phytogenic feed additives (curcumin and silymarin) and postbiotics (yeast products) on the health, performance and redox status of weaned piglets under the dietary challenge of fumonisins (FUMs). The study was conducted in duplicate in the course of two independent trials on two different farms. One hundred and fifty (150) weaned piglets per trial farm were allocated into two separate groups: (a) T1 (control group): 75 weaned piglets received FUM-contaminated feed and (b) T2 (experimental group): 75 weaned piglets received FUM-contaminated feed with the mycotoxin-detoxifying agent from the day of weaning (28 days) until 70 days of age. Thiobarbituric acid reactive substances (TBARSs), protein carbonyls (CARBs) and the overall antioxidant capacity (TAC) were assessed in plasma as indicators of redox status at 45 and 70 days of age. Furthermore, mortality and performance parameters were recorded at 28, 45 and 70 days of age, while histopathological examination was performed at the end of the trial period (day 70). The results of the present study reveal the beneficial effects of supplementing a novel mycotoxin detoxifier in the diets of weaners, including improved redox status, potential hepatoprotective properties and enhanced growth performance.

Preparation and characterization of pectin-alginate-based microbeads reinforced by nano montmorillonite filler for probiotics encapsulation: Improving viability and colonic colonization.

Hydrogel microbeads can be used to enhance the stability of probiotics during gastrointestinal delivery and storage. In this study, the pectin-alginate hydrogel was enhanced by adding montmorillonite filler to produce microbeads for encapsulating Lactobacillus kefiranofaciens (LK). Results showed that the viscosity of biopolymer solutions with 1 % (PAMT1) and 3 % (PAMT3) montmorillonite addition was suitable for producing regular-shaped microbeads. A layered cross-linked network was formed on the surface of PAMT3 microbeads through electrostatic interaction between pectin-alginate and montmorillonite filler, and the surrounding LK with adsorbed montmorillonite was encapsulated inside the microbeads. PAMT3 microbeads reduced the loss of viability of LK when passing through the gastric acid environment, and facilitated the slow release of LK in the intestine and colonic colonization. The maximum decrease in viability among all filler groups was 1.21 log CFU/g after two weeks of storage, while PAMT3 freeze-drying microbeads only decreased by 0.46 log CFU/g, indicating that the gel layer synergized with the adsorbed layer to provide dual protection for probiotics. Therefore, filler-reinforced microbeads are a promising bulk encapsulation carrier with great potential for the protection and delivery of probiotics and can be developed as food additives for dairy products.

The combined effects of lanthanum-modified bentonite and Vallisneria spiralis on phosphorus, dissolved organic matter, and heavy metal(loid)s.

The use of lanthanum-modified bentonite (LMB) combined with Vallisneria spiralis (V∙s) (LMB + V∙s) is a common method for controlling internal phosphorus (P) release from sediments. However, the behaviors of iron (Fe) and manganese (Mn) under LMB + V∙s treatments, as well as the associated coupling effect on P, dissolved organic matter (DOM), and heavy metal(loid)s (HMs), require further investigations. Therefore, we used in this study a microelectrode system and high-resolution dialysis technology (HR-Peeper) to study the combined effects of LMB and V∙s on P, DOM, and HMs through a 66-day incubation experiment. The LMB + V∙s treatment increased the sediment DO concentration, promoting in-situ formations of Fe (III)/Mn (IV) oxyhydroxides, which, in turn, adsorbed P, soluble tungsten (W), DOM, and HMs. The increase in the concentrations of HCl-P, amorphous and poorly crystalline (oxyhydr) oxides-bound W, and oxidizable HMs forms demonstrated the capacity of the LMB + V∙s treatment to transform mobile P, W, and other HMs forms into more stable forms. The significant positive correlations between SRP, soluble W, UV254, and soluble Fe (II)/Mn, and the increased concentrations of the oxidizable HMs forms suggested the crucial role of the Fe/Mn redox in controlling the release of SRP, DOM, and HMs from sediments. The LMB + V∙s treatment resulted in SRP, W, and DOM removal rates of 74.49, 78.58, and 54.78 %, which were higher than those observed in the control group (without LMB and V∙s applications). On the other hand, the single and combined uses of LMB and V·s influenced the relative abundances of the sediment microbial communities without exhibiting effects on microbial diversity. This study demonstrated the key role of combined LMB and V∙s applications in controlling the release of P, W, DOM, and HMs in eutrophic lakes.

Recent advances in natural nanoclay for diagnosis and therapy of cancer: A review.

Cancer is still one of the deadliest diseases, and diagnosing and treating it effectively remains difficult. As a result, advancements in earlier detection and better therapies are urgently needed. Conventional chemotherapy induces chemoresistance, has non-specific toxicity, and has a meager efficacy. Natural materials like nanosized clay mineral formations of various shapes (platy, tubular, spherical, and fibrous) with tunable physicochemical, morphological, and structural features serve as potential templates for these. As multifunctional biocompatible nanocarriers with numerous applications in cancer research, diagnosis, and therapy, their submicron size, individual morphology, high specific surface area, enhanced adsorption ability, cation exchange capacity, and multilayered organization of 0.7-1 nm thick single sheets have attracted significant interest. Kaolinite, halloysite, montmorillonite, laponite, bentonite, sepiolite, palygorskite, and allophane are the most typical nanoclay minerals explored for cancer. These multilayered minerals can function as nanocarriers to effectively carry a variety of anticancer medications to the tumor site and improve their stability, dispersibility, sustained release, and transport. Proteins and DNA/RNA can be transported using nanoclays with positive and negative surfaces. The platform for phototherapeutic agents can be nanoclays. Clays with bio-functionality have been developed using various surface engineering techniques, which could help treat cancer. The promise of nanoclays as distinctive crystalline materials with applications in cancer research, diagnostics, and therapy are examined in this review.

Combining lanthanum-modified bentonite and calcium peroxide to enhance phosphorus removal from lake sediments.

Lanthanum-modified bentonite (LMB) and calcium peroxide (CP) are known for their effective removal phosphorus (P) capacities. The present study aims to investigate the effects of the combined use of LMB and CP（LMB + CP）on the sediment P, dissolved organic matter (DOM) and iron (Fe) concentrations through a 90-day incubation experiment. The combined treatment showed strong removal effects on sediment P and DOM. Indeed, the SRP and DOM concentrations in the 0-10 cm sediment layer decreased following the combined application of LMB and CP by 40.67 and 28.95%, respectively, compared to those of the control group (CK). In contrast, the HCl-P in the 0-5 cm sediment layer increased following the combined treatment by 13.28%. In addition, compared with the single application of LMB, the LMB + CP treatment significantly reduced the soluble Fe (Ⅱ) in the sediment pore water and promoted the oxidation of Fe. Therefore, LMB + CP can enhance the removal of internal P from sediments. The DOM removal and Fe oxidation in sediment pore waters are beneficial for enhancing the adsorption of P by LMB. On the other hand, the single and combined applications of LMB and CP increased the richness of the sediment microbial communities while exhibiting slight effects on their diversity. According to the results of this study, the combined use of LMB and oxidizing materials represents a novel method for treating lakes with high internal phosphorus and DOM loads in sediments.

The effects of different doses of lanthanum-modified bentonite in combination with a submerged macrophyte (Vallisneria denseserrulata) on phosphorus inactivation and macrophyte growth: A mesocosm study.

The combination of chemical phosphorus (P) inactivation and submerged macrophyte transplantation has been widely used in lake restoration as it yields stronger effects than when applying either method alone. However, the dose effect of chemical materials on P inactivation when used in combination with submerged macrophytes and the influences of the chemicals used on the submerged macrophytes growth remain largely unknown. In this study, we investigated P inactivation in both the water column and the sediment, and the responses of submerged macrophytes to Lanthanum modified bentonite (LMB) in an outdoor mesocosm experiment where Vallisneria denseserrulata were transplanted into all mesocosms and LMB was added at four dosage levels, respectively: control (LMB-free), low dosage (570 g m-2), middle dosage (1140 g m-2), and high dosage (2280 g m-2). The results showed that the combination of LMB dosage and V. denseserrulata reduced TP in the water column by 32%-38% compared to V. denseserrulata alone, while no significant difference was observed among the three LMB treatments. Porewater soluble reactive P, two-dimensional diffusive gradient in thin films (DGT)-labile P concentrations, and P transformation in the 0-1 cm sediment layer exhibited similar trends along the LMB dosage gradient. Besides, LMB inhibited plant growth and reduced the uptake of mineral elements (i.e., calcium, manganese, iron, and magnesium) in a dosage-dependent manner with LMB. LMB may reduce plant growth by creating a P deficiency risk for new ramets and by interfering with the uptake of mineral elements. Considering both the dose effect of LMB on P inactivation and negative effect on macrophyte growth, we suggest a "small dosage, frequent application" method for LMB application to be used in lake restoration aiming to recover submerged macrophytes and clear water conditions.

Unlocking the key role of bentonite fungal isolates in tellurium and selenium bioremediation and biorecovery: Implications in the safety of radioactive waste disposal.

Research on eco-friendly bioremediation strategies for mitigating the environmental impact of toxic metals has gained attention in the last years. Among all promising solutions, bentonite clays, to be used as artificial barriers to isolate radioactive wastes within the deep geological repository (DGR) concept, have emerged as effective reservoir of microorganisms with remarkable bioremediation potential. The present study aims to investigate the impact of bentonite fungi in the speciation and mobility of selenium (Se) and tellurium (Te), as natural analogues 79Se and 132Te present in radioactive waste, to screen for those strains with bioremediation potential within the context of DGR. For this purpose, a multidisciplinary approach combining microbiology, biochemistry, and microscopy was performed. Notably, Aspergillus sp. 3A demonstrated a high tolerance to Te(IV) and Se(IV), as evidenced by minimal inhibitory concentrations of >16 and >32 mM, respectively, along with high tolerance indexes. The high metalloid tolerance of Aspergillus sp. 3A is mediated by its capability to reduce these mobile and toxic elements to their elemental less soluble forms [Te(0) and Se(0)], forming nanostructures of various morphologies. Advanced electron microscopy techniques revealed intracellular Te(0) manifesting as amorphous needle-like nanoparticles and extracellular Te(0) forming substantial microspheres and irregular accumulations, characterized by a trigonal crystalline phase. Similarly, Se(0) exhibited a diverse array of morphologies, including hexagonal, irregular, and needle-shaped structures, accompanied by a monoclinic crystalline phase. The formation of less mobile Te(0) and Se(0) nanostructures through novel and environmentally friendly processes by Aspergillus sp. 3A suggests it would be an excellent candidate for bioremediation in contaminated environments, such as the vicinity of deep geological repositories. It moreover holds immense potential for the recovery and synthesis of Te and Se nanostructures for use in numerous biotechnological and biomedical applications.

CoFe2O4 modified bentonite-based mixed matrix loose nanofiltration membranes for effective wastewater treatment.

Mixed-matrix membranes (MMMs) with an ideal polymer/hydrophilic flux enhancer interface considerably recuperates the separation and purification performance of membrane. In this direction, a novel CoFe2O4 functionalized natural clay-bentonite (CoFe2O4@BT) material as a compatible flux enhancer was synthesized for preparation of mixed matrix based in polyethersulfone (PES) matrix. Here, the influences of CoFe2O4@BT on the morphology and performance of the MMMs membranes were systematically investigated using various analytical techniques. Meanwhile, the water flux and sepration eficiency of the CoFe2O4@BT-PES membranes significantly enhanced due to the incorporation of CoFe2O4@BT that altered hydrophilicity, pore and surface characteristic features. The water flux as well as separation efficiency range up to 95%, 94.69%, 94.16% of Congo red (CR), Crystal violet (CV), and humic acid (HA) respectively. Meanwhile, the fouling parameters demonstrated that the CoFe2O4@BT-PES membranes exhibited better antifouling property in the long term experiment comparing with commercial polyamide membrane. CoFe2O4@BT material incorporated membranes showed less decline ratio and a better recovery ratio. The high rejection of dyes with a high permeation flux of the newly designed membranes indicated an amazing possibility for dye purification. In this study, a potential dye mechanism for composite membranes impacted by synthetic CoFe2O4@BT was also put forth. Within the context of application considerations for environmental protection, new materials stock in membranes show good potential for the separation of different organic contaminants.

Kinetics of glyphosate and aminomethylphosphonic acid sorption onto montmorillonite clays in soil and their translocation to genetically modified corn.

The co-occurrence of glyphosate (GLP) and aminomethylphosphonic acid (AMPA) in contaminated water, soil, sediment and plants is a cause for concern due to potential threats to the ecosystem and human health. A major route of exposure is through contact with contaminated soil and consumption of crops containing GLP and AMPA residues. However, clay-based sorption strategies for mixtures of GLP and AMPA in soil, plants and garden produce have been very limited. In this study, in vitro soil and in vivo genetically modified corn models were used to establish the proof of concept that the inclusion of clay sorbents in contaminated soils will reduce the bioavailability of GLP and AMPA in soils and their adverse effects on plant growth. Effects of chemical concentration (1-10 mg/kg), sorbent dose (0.5%-3% in soil and 0.5%-1% in plants) and duration (up to 28 days) on sorption kinetics were studied. The time course results showed a continuous GLP degradation to AMPA. The inclusion of calcium montmorillonite (CM) and acid processed montmorillonite (APM) clays at all doses significantly and consistently reduced the bioavailability of both chemicals from soils to plant roots and leaves in a dose- and time-dependent manner without detectable dissociation. Plants treated with 0.5% and 1% APM inclusion showed the highest growth rate (p ≤ 0.05) and lowest chemical bioavailability with up to 76% reduction in roots and 57% reduction in leaves. Results indicated that montmorillonite clays could be added as soil supplements to reduce hazardous mixtures of GLP and AMPA in soils and plants.

Functionality and mechanistic parametric study of the potential of waste plantain peels and commercial bentonite for soybean oil refining.

The consumption of unrefined vegetable oil poses acute and chronic health issues, yet improper disposal of waste plantain peels is not environmentally sustainable. This research investigates the feasibility, mechanism and thermodynamics of waste plantain peels, and commercial bentonite clay for soybean oil refining. Experiment was carried out using masses (1-4 g) of commercial bentonite clay, and unripe plantain peel ash (UPPA) to degummed and neutralized free fatty acid (FFA) contents in crude soybean oil at varying temperatures (50-120 °C), and time (15-35 min) for treatment of soybean oil. FTIR spectroscopy, SEM, and XRF techniques were applied to characterize the sample. The results established that at optimum 4.0 g dosage, the UPPA (97.73%) was more effective in the removal of FFA from oil at 50 °C and 20 min, while the clay (90%) was more effective in the removal of colour pigment from the vegetable oil 100 °C, and 25 min. The optimum efficiency of Clay-Ash-composite (70:30) in adsorbing pigment from soybean oil corresponds to 80%. The impact of changing viscosities, densities, and acid values on the performance of UPPA, clay, and clay-UPPA composite was investigated. Mechanistic studies confirmed the pseudo-second-order kinetics at 5 × 10-2 g/mg min-1 and 1.87 × 10-1 g/mg min-1, with corresponding adsorption capacity of 30.40 mg/g and 4.91 mg/g, at R2 ≤ 0.9982. The UPPA-driven sorption of FFA occurred as a physisorption and exothermic process (- 620.60 kJ/mol), while colour pigment removal occurred by chemisorption and endothermic process (22.40 kJ/mol). The finding recommends UPPA and composite as economically feasible for refining soybean oil.

Formation and sedimentation of oil-mineral aggregates in the presence of chemical dispersant.

The formation and sedimentation of oil-mineral aggregates (OMAs) is the major method to transport spilled oil to the seafloor. In this study, the formation and sedimentation experiments of OMA using montmorillonite and four crude oils were performed in a wave tank in the presence of chemical dispersant. Most of the formed OMAs were droplet OMAs, and single droplet OMA would aggregate into multiple ones under the action of the dispersant. The size of the oil droplets trapped in the OMA increased with time and was larger for the oil with higher viscosity. The sinking velocities of OMAs formed in this study were between 100-1200 µm s-1 and they were positively correlated with their diameter. The density of OMA was of the same order as that of the crude oil that formed them. An increase in the dispersant dosage could promote the formation of OMAs. The oil content in OMAs was higher for the denser oil in the presence of a dispersant. The maximum oil trapping efficiency of OMAs was 48.05%. This study provides fundamental data on the formation kinetics of OMAs.

Immobilization of phosphorus in water-sediment system by iron-modified attapulgite, calcite, bentonite and dolomite under feed input condition: Efficiency, mechanism, application mode effect and response of microbial communities and iron mobilization.

Four kinds of iron-based materials, i.e., iron-modified attapulgite, calcite, bentonite and dolomite (abbreviated as Fe-ATP, Fe-CA, Fe-BT and Fe-DOL, respectively) were prepared and used to immobilize the phosphorus in the system of overlying water (O-water) and sediment under the feed input condition, and their immobilization efficiencies and mechanisms were investigated. The influence of application mode on the immobilization of phosphorus in the water-sediment system by Fe-ATP, Fe-CA, Fe-BT and Fe-DOL was researched. The effects of Fe-ATP, Fe-CA, Fe-BT and Fe-DOL on the concentration of labile iron in the water-sediment system and the microbial communities in sediment were also studied. The results showed that the Fe-ATP, Fe-CA, Fe-BT and Fe-DOL addition all can effectively immobilize the soluble reactive phosphorus (SRP), dissolved total phosphorus (DTP) and diffusive gradients in thin-films (DGT)-labile phosphorus in O-water under the feed input condition, and also had the ability to inactivate the DGT-labile phosphorus in the top sediment. Although the change in the application mode from the one-time addition to the multiple addition reduced the inactivation efficiencies of SRP and DTP in O-water in the early period of application, it increased the immobilization efficiencies in the later period of application. Although Fe-ATP, Fe-CA, Fe-BT and Fe-DOL had a certain releasing risk of iron into the pore water, they had negligible risk of iron release into O-water. The addition of Fe-ATP, Fe-CA, Fe-BT or Fe-DOL reshaped the sediment bacterial community structure and can affect the microorganism-driven phosphorus cycle in the sediment. Results of this work suggest that Fe-ATP, Fe-CA, Fe-BT and Fe-DOL are promising phosphorus-inactivation materials to immobilize the phosphorus in the water-sediment system under the feed input condition.

Stable microbial community in compacted bentonite after 5 years of exposure to natural granitic groundwater.

The Materials Corrosion Test (MaCoTe) at the Underground Research Laboratory in Grimsel, Switzerland, assesses the microbiology and corrosion behavior of engineered barrier components of a deep geological repository (DGR) for long-term disposal of high-level nuclear waste. Diversity and temporal changes of bentonite-associated microbial community profiles were assessed under DGR-like conditions for compacted Wyoming MX-80 bentonite (1.25 g/cm3 and 1.50 g/cm3 targeted dry densities) exposed to natural groundwater. Using culture-dependent and molecular techniques, samples taken from the outside layer of 5-year borehole modules revealed up to 66% and 23% of 16S rRNA gene sequences affiliated with Desulfosporosinus and Desulfovibrio, respectively. Putatively involved in sulfate reduction, these taxa were almost undetectable within the bentonite core. Instead, microbial profiles of the inner bentonite core were similar to uncompacted bentonite used to pack modules years earlier, and were consistent with a previously published 1-year time point, revealing no detectable microbial growth. Abundances of culturable aerobic and anaerobic heterotrophic bacteria in the uncompacted bentonite were relatively low, with less than 1,000 and 100 colony-forming units (CFUs) per gram dry weight, respectively. Nearly 5 years after emplacement, culturable heterotrophic bacterial CFUs and sulfate-reducing bacteria did not change significantly inside the bentonite core. Phospholipid fatty acid data indicated similar lipid abundance, and corresponding cell abundance estimates, for inner 5-year MaCoTe bentonite samples compared to those previously obtained for 1-year incubations. Collectively, our results provide complementary evidence for microbial stability inside highly compacted bentonite exposed to conditions that mimic engineered barrier components of a deep geological repository. IMPORTANCE The long-term safety of a deep geological repository for used nuclear fuel is dependent on the performance of the engineered and natural barriers. Microbial activity can produce chemical species that can influence the corrosion of the disposal containers for used nuclear fuel. Although previous studies have evaluated the microbiology of compacted bentonite clay within subsurface environments, these have been limited to relatively short incubations (i.e., 1 year). The current study provides a unique 5-year perspective that reinforces previous findings of growth inhibition for bentonite clay exposed to in situ subsurface conditions.

Comparison of dredging, lanthanum-modified bentonite, aluminium-modified zeolite, and FeCl2 in controlling internal nutrient loading.

The eutrophic Bouvigne pond (Breda, The Netherlands) regularly suffers from cyanobacterial blooms. To improve the water quality, the external nutrient loading and the nutrient release from the pond sediment have to be reduced. An enclosure experiment was performed in the pond between March 9 and July 29, 2020 to compare the efficiency of dredging, addition of the lanthanum-modified bentonite clay Phoslock® (LMB), the aluminum-modified zeolite Aqual-P™ (AMZ) and FeCl2 to mitigate nutrient release from the sediment. The treatments improved water quality. Mean total phosphorus (TP) concentrations in water were 0.091, 0.058, 0.032, 0.031, and 0.030 mg P L-1 in controls, dredged, FeCl2, LMB and AMZ treated enclosures, respectively. Mean filterable P (FP) concentrations were 0.056, 0.010, 0.009, 0.005, and 0.005 mg P L-1 in controls, dredged, FeCl2, LMB and AMZ treatments, respectively. Total nitrogen (TN) and dissolved inorganic nitrogen (DIN) were similar among treatments; lanthanum was elevated in LMB treatments, Fe and Cl in FeCl2 treatments, and Al and Cl in AMZ treatments. After 112 days, sediment was collected from each enclosure, and subsequent sequential P extraction revealed that the mobile P pool in the sediments had reduced by 71.4%, 60.2%, 38%, and 5.2% in dredged, AMZ, LMB, and FeCl2 treatments compared to the controls. A sediment core incubation laboratory experiment done simultaneously with the enclosure experiment revealed that FP fluxes were positive in controls and cores from the dredged area, while negative in LMB, AMZ and FeCl2 treated cores. Dissolved inorganic nitrogen (DIN) release rate in LMB treated cores was 3.6 times higher than in controls. Overall, the applied in-lake treatments improved water quality in the enclosures. Based on this study, from effectiveness, application, stakeholders engagement, costs and environmental safety, LMB treatment would be the preferred option to reduce the internal nutrient loading of the Bouvigne pond, but additional arguments also have to be considered when preparing a restoration.

Immobilization and docking studies of Carlsberg subtilisin for application in poultry industry.

Carlsberg subtilisin from Bacillus licheniformis PB1 was investigated as a potential feed supplement, through immobilizing on bentonite for improving the growth rate of broilers. Initially, the pre-optimized and partially-purified protease was extracted and characterized using SDS-PAGE with MW 27.0 KDa. The MALDI-TOF-MS/MS spectrum confirmed a tryptic peptide peak with m/z 1108.496 referring to the Carlsberg subtilisin as a protein-digesting enzyme with alkaline nature. The highest free enzyme activity (30 U/mg) was observed at 50°C, 1 M potassium phosphate, and pH 8.0. the enhanced stability was observed when the enzyme was adsorbed to an inert solid support with 86.39 ± 4.36% activity retention under 20 optimized conditions. Additionally, the dried immobilized enzyme exhibited only a 5% activity loss after two-week storage at room temperature. Structural modeling (Docking) revealed that hydrophobic interactions between bentonite and amino acids surrounding the catalytic triad keep the enzyme structure intact upon drying at RT. The prominent hygroscopic nature of bentonite facilitated protein structure retention upon drying. During a 46-days study, supplementation of boilers' feed with the subtilisin-bentonite complex promoted significant weight gain i.e. 15.03% in contrast to positive control (p = 0.001).

Efficacy of Feed Additive Containing Bentonite and Enzymatically Hydrolyzed Yeast on Intestinal Health and Growth of Newly Weaned Pigs under Chronic Dietary Challenges of Fumonisin and Aflatoxin.

This study aimed to investigate the efficacy of a feed additive containing bentonite and enzymatically hydrolyzed yeast on the intestinal health and growth of newly weaned pigs under chronic dietary exposure to fumonisin and aflatoxin. Newly weaned pigs were randomly allotted to one of four possible treatments: a control diet of conventional corn; a diet of corn contaminated with fumonisin and aflatoxin; a diet of mycotoxin-contaminated corn with 0.2% of feed additive; and a diet of mycotoxin contaminated corn with 0.4% of feed additive. We observed lower average weight gain and average daily feed intake in pigs that were fed only mycotoxin-contaminated corn compared to the control group. Feed additive supplementation linearly increased both average weight gain and feed intake, as well as tumor necrosis factor-alpha. In the jejunum, there was an observed decrease in immunoglobulin A and an increase in claudin-1. Additionally, feed additive supplementation increased the villus height to crypt depth ratio compared to the control. In conclusion, feed additives containing bentonite and enzymatically hydrolyzed yeast could mitigate the detrimental effects of mycotoxins on the growth performance of newly weaned pigs by improving intestinal integrity and positively modulating immune response.

Effect of Protease Combined with Heat Treatment on the Volatile Composition and Aroma Quality in Liqueur Wine.

The aim of this paper was to compare the effects of two clarification methods, protease combined with heat treatment and bentonite, on the aroma quality of liqueur wines, and to identify and analyze the overall differences between the basic components and volatile aroma compounds of liqueur wines after the two treatments by chemical analysis, headspace-solid-phase microextraction-gas chromatography/mass spectrometry (HS-SPME-GC/MS), and orthogonal partial least squares discriminant analysis (OPLS-DA). The results showed that total acidity, volatile acidity and pH in liqueur wines after protease combined with heat treatment were not significantly different from those of the blank control, and the ability to remove proteins was equal to that of the bentonite treatment. A total of 58 volatile aroma compounds were detected by HS-SPME-GC/MS. Compared with the blank control group (44 species, total 108.705 mg/L), 52 (83.233 mg/L) and 50 (120.655 mg/L) aroma compounds were detected in the bentonite and protease combined with heat treatments, respectively. Compared with the control and bentonite treatment, the protease combined with heat treatment significantly increased the total content of aromatic compounds in liqueur wines, and the types and contents of olefins, furans and phenols were higher. Among them, the compounds with major contributions in the protease combined with heat treatment were ionone, ß-damascenone, 3-methyl-1-butanol, alpha-terpineol and limonene, which helped increase the content of terpenoids and enhance the floral and fruit aroma of the wine. Meanwhile, linalool, diethyl succinate, 2-methyl-3-heptanone, butanal diethyl acetal, hexanal and n-octanol were six compounds with high content of aromatic compounds unique to liqueur wines after protease combined with heat treatment. The sensory evaluation results were consistent with the results of aromatic compound detection, and the overall quality was better. The results may provide a reference for further exploration of protease-based clarifiers suitable for liqueur wines.

Lecithin-amended montmorillonite clays enhance the antibacterial effect of barrier creams.

The objective of this study was to assess in vitro antibacterial activity of barrier cream (EVB) formulations containing either calcium montmorillonite (CM) or lecithin-amended montmorillonite (CML). All ingredients were generally recognized as safe (GRAS), and clay minerals were specifically studied due to their known ability to adsorb numerous toxins of human clinical relevance. Characterization of the EVB formulations showed good spreadability, pH, appearance, unity, viscosity, and no evidence of phase separation. Colony forming, disk diffusion susceptibility, and agar dilution assays were used to determine the minimal bactericidal concentration (MBC) of total EVB formulations, as well as respective individual ingredients, against E. coli. Active ingredients within the base EVB formulation were found to be essential oils and zinc oxide. EVB-CML at 0.5-25 mg/mL dose-dependently and significantly (p ≤ 0.01) enhanced the antibacterial activity of the base EVB formulation. MBC values for EVB-CML were 2.5 mg/mL in the colony forming assay and 0.75 mg/mL in the agar dilution test, with a zone of inhibition. Both EVB and EVB-CML displayed stronger antibacterial activity than four antimicrobial creams currently marketed in the United States. Moreover, this effect was rapid, favored by high temperature, and product stability testing suggested a shelf life of at least 10 months. Taken together, these findings demonstrate the ability of CML to enhance the antibacterial effect of the base EVB formulation against E. coli. This novel EVB-CML formulation represents a promising advancement toward improved antibacterial efficacy beyond current industry standards for commercial skin creams and sunscreens.

Adsorption of Different Ionic Types of Polyacrylamide on Montmorillonite Surface: Insight from QCM-D and Molecular Dynamic Simulation.

This study investigates the interaction between montmorillonite and polyacrylamide (PAM) with different ionic types using quartz crystal microbalance with dissipation monitoring (QCM-D) and molecular dynamics (MD) simulations. The goal was to understand the effect of ionicity and ionic type on polymer deposition on montmorillonite surfaces. The results of the QCM-D analysis showed that a decrease in pH led to an increase in the adsorption of montmorillonite on the alumina surface. The ranking of adsorption mass on alumina and pre-adsorbed montmorillonite alumina surfaces was found to be cationic polyacrylamide (CPAM) > polyacrylamide (NPAM) > anionic polyacrylamide (APAM). The study also found that CPAM had the strongest bridging effect on montmorillonite nanoparticles, followed by NPAM, while APAM had a negligible bridging effect. The MD simulations showed that ionicity had a significant influence on the adsorption of polyacrylamides. The cationic functional group N(CH3)3+ had the strongest attraction interaction with the montmorillonite surface, followed by the hydrogen bonding interaction of the amide functional group CONH2, and the anionic functional group COO- had a repulsive interaction. The results suggest that at high ionicity levels, CPAM can be adsorbed on the montmorillonite surface, while at low ionicity levels, APAM may still be adsorbed with a strong coordination trend.

Optimization of adsorption performance of cerium-loaded intercalated bentonite by CCD-RSM and GA-BPNN and its application in simultaneous removal of phosphorus and ammonia nitrogen.

Excessive phosphorus (P) and ammonia nitrogen (NH3-N) in water bodies can lead to eutrophication of the aquatic environment. Therefore, it is important to develop a technology that can efficiently remove P and NH3-N from water. Here, the adsorption performance of cerium-loaded intercalated bentonite (Ce-bentonite) was optimized based on single-factor experiments using central composite design-response surface methodology (CCD-RSM) and genetic algorithm-back propagation neural network (GA-BPNN) models. Based on the determination coefficient (R2), mean absolute error (MAE), mean square error (MSE), mean absolute percentage error (MAPE), and root mean square error (RMSE), the GA-BPNN model was found to be more accurate in predicting adsorption conditions than the CCD-RSM model. The validation results showed that the removal efficiency of P and NH3-N by Ce-bentonite under optimal adsorption conditions (adsorbent dosage = 1.0 g, adsorption time = 60 min, pH = 8, initial concentration = 30 mg/L) reached 95.70% and 65.93%. Furthermore, based on the application of these optimal conditions in simultaneous removal of P and NH3-N by Ce-bentonite, pseudo-second order and Freundlich models were able to better analyze adsorption kinetics and isotherms. It is concluded that the optimization of experimental conditions by GA-BPNN has some guidance and provides a new approach to explore adsorption performance after optimizing the conditions.