Nitrogen and phosphorus stress as a tool to induce lipid production in microalgae.

Microalgae, capable of accumulating large amounts of lipids, are of great value for biodiesel production. The high cost of such production stimulates the search for cultivation conditions that ensure their highest productivity. Reducing the content of nitrogen and phosphorus in the culture medium is widely used to change the content and productivity of lipids in microalgae. Achieving the right balance between maximum growth and maximum lipid content and productivity is the primary goal of many experimental works to ensure cost-effective biodiesel production from microalgae. The content of nitrogen and phosphorus in nutrient media for algal cultivation after converted to nitrogen (-N) and phosphorus (-P) lies in an extensive range: from 0.007 g L- 1 to 0.417 g L- 1 and from 0.0003 g L- 1 to 0.227 g L- 1 and N:P ratio from 0.12:1 to 823.33:1. When studying nutritional stress in microalgae, no single approach is used to determine the experimental concentrations of nitrogen and phosphorus. This precludes the possibility of correct interpretation of the data and may lead to erroneous conclusions. This work results from the systematisation of information on using nitrogen and phosphorus restriction to increase the lipid productivity of microalgae of different taxonomic and ecological groups to identify future research directions. The results of 301 experiments were included in the analysis using the principal components method. The investigation considered various divisions and classes: Cyanobacteria, Rhodophyta, Dinophyta, Haptophyta, Cryptophyta, Heterokontophyta/Ochrophyta (Bacillariophyceae, Eustigmatophyceae, Xanthophyceae), Chlorophyta, and also the ratio N:P, the time of the experiment, the light intensity during cultivation. Based on the concentrations of nitrogen and phosphorus existing in various nutrient media, a general scheme for designating the supply of nutrient media for nitrogen (as NO3- or NH4+, N g L- 1) and phosphorus (as РO4-, P g L- 1) has been proposed: replete -N (˃0.4 g L- 1), moderate -N (0.4-0.2), moderate N-limitation (0.19-0.1), strong N-limitation (˂0.1), without nitrogen (0), replete -Р (˃0.2), moderate -P (0.2-0.02), moderate P-limitation (0.019-0.01), strong P-limitation (˂0.01), without phosphorus (0).

Performance of co-culture strategy on nutrient removal and biogas upgrading by strigolactone induction.

In this study, we investigated the performance and elucidated the synergistic effects of microalgae-fungi symbionts co-cultured with 10-7 and 10-9  mol L-1 of GR24 and supplemented with endophytic bacteria, multi-walled carbon nanotubes (MWCNTs) or vitamin B12 (VB12), on nutrient removal and biogas upgrading. The results showed that the microalgae-fungi-bacteria symbiotic system co-cultured with 10-9  mol L-1 GR24 presented the optimal growth performance of 0.368 ± 0.04 d-1 , chlorophyll a of 249.36 ± 22.31 µg L-1 , and extracellular carbonic anhydrase activity of 42.55 ± 3.755 enzyme units. In this co-culture system, the organic matter, nutrients, and CO2 purification obtained the highest removal efficiency, with 81.35 ± 7.96% for chemical oxygen demand, 83.56 ± 7.91% total nitrogen, 84.17 ± 7.95% total phosphorus, and 63.72 ± 6.06% CO2 . The symbiont system also greatly increased the methane content in the biogas by 30.67%. The remarkable performance of the microalgae-fungi-bacteria symbiotic system shows its ability to be broadly applied in simultaneous biogas upgrading and wastewater treatment. PRACTITIONER POINTS: The optimal GR24 concentration for microalgae-fungi consortia was 10-9  M. Endophytic bacteria were superior to MWCNTs and VB12. Fungi-algae-bacteria consortia presented excellent growth and removal performance. Removal efficiencies of COD, TN, and TP were about 81% under optimum treatment.

Effect of GR24 concentrations on tetracycline and nutrient removal from biogas slurry by different microalgae-based technologies.

A biogas slurry composed of carbon, nitrogen, phosphorus, and antibiotics was generated. Investigations into the nutrient and tetracycline removal performance of four microalgae-based contaminant removal technologies, including Chlorella vulgaris, C. vulgaris co-cultured with endophytic bacteria, C. vulgaris co-cultured with Ganoderma lucidum, and C. vulgaris co-cultured with G. lucidum and endophytic bacteria, were conducted. The algal-bacterial-fungal consortium with 10-9 M strigolactone (GR24) yielded the maximum growth rate and average daily yield for algae at 0.325 ± 0.03 d-1 and 0.192 ± 0.02 g L-1 d-1, respectively. The highest nutrient/ tetracycline removal efficiencies were 83.28 ± 7.95 % for chemical oxygen demand (COD), 82.62 ± 7.97 % for total nitrogen (TN), 85.15 ± 8.26 % for total phosphorus (TP) and 83.92 ± 7.65 % for tetracycline. Adding an algal-bacterial-fungal consortium with an optimal synthetic analog GR24 concentration is seemingly an encouraging strategy for enhancing pollutant removal by algae, possibly overcoming the challenges of eutrophication and antibiotic pollution.

Optimizing the catalytic activities of methanol and thermotolerant Kocuria flava lipases for biodiesel production from cooking oil wastes.

In this study, two highly thermotolerant and methanol-tolerant lipase-producing bacteria were isolated from cooking oil and they exhibited a high number of catalytic lipase activities recording 18.65 ± 0.68 U/mL and 13.14 ± 0.03 U/mL, respectively. Bacterial isolates were identified according to phenotypic and genotypic 16S rRNA characterization as Kocuria flava ASU5 (MT919305) and Bacillus circulans ASU11 (MT919306). Lipases produced from Kocuria flava ASU5 showed the highest methanol tolerance, recording 98.4% relative activity as well as exhibited high thermostability and alkaline stability. Under the optimum conditions obtained from 3D plots of response surface methodology design, the Kocuria flava ASU5 biocatalyst exhibited an 83.08% yield of biodiesel at optimized reaction variables of, 60 â—‹C, pH value 8 and 1:2 oil/alcohol molar ratios in the reaction mixture. As well as, the obtained results showed the interactions of temperature/methanol were significant effects, whereas this was not noted in the case of temperature/pH and pH/methanol interactions. The obtained amount of biodiesel from cooking oil was 83.08%, which was analyzed by a GC/Ms profile. The produced biodiesel was confirmed by Fourier-transform infrared spectroscopy (FTIR) approaches showing an absorption band at 1743 cm-1, which is recognized for its absorption in the carbonyl group (C=O) which is characteristic of ester absorption. The energy content generated from biodiesel synthesized was estimated as 12,628.5 kJ/mol. Consequently, Kocuria flava MT919305 may provide promising thermostable, methanol-tolerant lipases, which may improve the economic feasibility and biotechnology of enzyme biocatalysis in the synthesis of value-added green chemicals.

Semi-pilot scale production of biodiesel from waste frying oil by genetically improved fungal lipases.

This paper addresses the issue of combining the usage of waste frying oil (WFO), as a feedstock, and a lipase produced in solid-state fermentation (SSF), as a biocatalyst, for semi-pilot scale production of biodiesel as fatty acid methyl esters (FAME). Two fungal mutants namely; Rhizopus stolonifer 1aNRC11 mutant F (1F) and Aspergillus tamarii NDA03a mutant G (3G) were used as a cocatalyst. The two mutants were cultivated separately by SSF in a tray bioreactor. The dried fermented solid of 1F and 3G mutants were used in a ratio of 3:1, respectively, for WFO transesterification. Optimization of several semi-pilot process stages including SSF and WFO transesterification reaction conditions resulted in 92.3% conversion of WFO to FAME. This FAME yield was obtained after 48 h using 10% cocatalyst (w/w of WFO), 10% water (w/w of WFO) and 3:1 methanol/ WFO molar ratio at 30 °C and 250 rpm. A preliminary economic evaluation of produced biodiesel price (190 $/Ton) is less than half the price of petroleum diesel in Egypt (401$/Ton) and is about 40.3% the price of biodiesel produced using a pure enzyme, which is a promising result. This strategy makes the biodiesel synthesis process greener, economical and sustainable.

Involvement of green technology in microalgal biodiesel production.

According to the report of the renewable energy policy network for the 21st century published in 2014, biodiesel and bioethanol are the most used biofuels and are responsible for transportation worldwide. Biodiesel specially has shown an increase in production globally by 15 times by volume from 2002 to 2012. Promising feedstock of biodiesel are cyanobacteria and microalgae as they possess a shorter cultivation time (4 fold lesser) and high oil content (10 fold higher) than corn, jatropha and soybean (conventional oil-producing territorial plants). Various valuable natural chemicals are also produced from these organisms including food supplements such as docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), pigments, and vitamins. Additionally, cellular components of microalgae and cyanobacteria are connected with therapeutic characteristics such as anti-inflammatory, antioxidant, antiviral and immune stimulating. Commercialization of algal biodiesel (or other products) can be achieved by isolating and identifying the high-yielding strains that possess a faster growth rate. Indigenous strains can be genetically engineered into high-yielding transgenic strains. The present article discusses about the use of nanotechnology and genetic engineering approach for improved lipid accumulation in microalgae for biodiesel production.

Deconstruction of plant biomass by a Cellulomonas strain isolated from an ultra-basic (lignin-stripping) spring.

Plant material falling into the ultra-basic (pH 11.5-11.9) springs within The Cedars, an actively serpentinizing site in Sonoma County, California, is subject to conditions that mimic the industrial pretreatment of lignocellulosic biomass for biofuel production. We sought to obtain hemicellulolytic/cellulolytic bacteria from The Cedars springs that are capable of withstanding the extreme alkaline conditions wherein calcium hydroxide-rich water removes lignin, making cell wall polysaccharides more accessible to microorganisms and their enzymes. We enriched for such bacteria by adding plant debris from the springs into a synthetic alkaline medium with ground tissue of the biofuel crop switchgrass (Panicum virgatum L.) as the sole source of carbon. From the enrichment culture we isolated the facultative anaerobic bacterium Cellulomonas sp. strain FA1 (NBRC 114238), which tolerates high pH and catabolizes the major plant cell wall-associated polysaccharides cellulose, pectin, and hemicellulose. Strain FA1 in monoculture colonized the plant material and degraded switchgrass at a faster rate than the community from which it was derived. Cells of strain FA1 could be acclimated through subculturing to grow at a maximal concentration of 13.4% ethanol. A strain FA1-encoded ß-1, 4-endoxylanase expressed in E. coli was active at a broad pH range, displaying near maximal activity at pH 6-9. Discovery of this bacterium illustrates the value of extreme alkaline springs in the search for microorganisms with potential for consolidated bioprocessing of plant biomass to biofuels and other valuable bio-inspired products.

Direct transesterification of fatty acids produced by Fusarium solani for biodiesel production: effect of carbon and nitrogen on lipid accumulation in the fungal biomass.

AIMS: The present work aims to explore a new oleaginous Fusarium isolate potential to accumulate lipids in its biomass from inexpensive substrates. In addition, impacts of carbon and nitrogen sources and their ratios on lipid production by the interested fungal isolate were also studied. METHODS AND RESULTS: Lipid was assayed by sulfo-phospho-vanillin colorimetric method. Among 11 Fusarium isolates obtained on potato dextrose agar from rhizosphereic soils, Fusarium RAS18 was selected as the highest producer that accumulates above 20% lipid. It was identified based on phenotypic characterization and the internal transcribed spacer sequence as Fusarium solani, that was recorded in the GenBank database under the accession number MK167372.1. The optimized lipid yield (34·5%) is obtained using glycerol (35 g l-1 ) and peptone (1·5 g l-1 ) as carbon and nitrogen sources respectively. The produced fatty acid methyl esters (biodiesel) is composed of linoleic acid (56·81%), palmitic acid (17·81%), oleic acid (11·81%) and stearic acid (11·12). The unsaturated fatty acids accounted for 69% and this is nearly similar to the plant oils commonly used in biodiesel production. CONCLUSIONS: These findings suggest the applicability of F. solani RAS18 as a promising strain to accumulate lipids from glycerol as a feedstock for biodiesel production. SIGNIFICANCE AND IMPACT OF THE STUDY: Fusarium solani RAS18 is a new oleaginous fungal isolate that is able to produce lipid (34·5%, g g-1 ) from glycerol. Glycerol is a cheap substrate and is formed as a byproduct from transesterification process and others industries. Thus, recyclation of glycerol for lipid production by micro-organisms is an important point of economic view. Direct transesterification of the produced fatty acids indicated its similarity to the plant oil composition used in biodiesel production. So, F. solani RAS18 might be a potential lipid source as a feedstock for biodiesel production.

Liquid Anaerobic Digestate as a Source of Nutrients for Lipid and Fatty Acid Accumulation by Auxenochlorella Protothecoides.

In recent years, there has been growing interest in the biomass of unicellular algae as a source of valuable metabolites. The main limitations in the commercial application of microbial biomass are associated with the costs of production thereof. Maize silage is one of the main substrates used in biogas plants in Europe. The effects of sterilized agricultural liquid digestate (LD) from methane fermentation of maize silage on the growth rates, macro and micronutrient removal efficiency, lipid content, and fatty acid profile in Auxenochlorella protothecoides were investigated. The results indicate that A. prothecoides can proliferate and accumulate lipids with simultaneous reduction of nutrients in the 1:20 diluted liquid digestate. The rate of nitrogen and phosphorus removal from the liquid digestate was 79.45% and 78.4%, respectively. Cells growing in diluted liquid digestate exhibited the maximum lipid content, i.e., 44.65%. The fatty acid profile of A. prothecoides shows a decrease in the content of linolenic acid by 20.87% and an increase in oleic acid by 32.16% in the LD, compared with the control. The liquid digestate changed the content of monounsaturated fatty acids and polyunsaturated fatty acids. The cells of A. protothecoides growing in the liquid digestate were characterized by lower PUFA content and higher MUFA levels.

Rhodococcus and Yarrowia-Based Lipid Production Using Lignin-Containing Industrial Residues.

Improvement in biorefining technologies coupled with development of novel fermentation strategies and analysis will be paramount in establishing supplementary and sustainable biofuel pathways. Oleaginous microorganisms that are capable of accumulating triacylglycerides (TAGs) and fatty acid methyl esters (FAMEs), such as Rhodococcus and Yarrowia species, can be used to produce second-generation biofuels from non-food competing carbon sources. These "microbiorefineries" provide a pathway to upgrade agricultural and industrial waste streams to fungible fuels or precursors to chemicals and materials. Here we provide a general overview on cultivating Rhodococcus and Yarrowia on agro-waste/industrial biomass pretreatment waste streams to produce single-cell oils/lipids and preparing samples for FAME detection.

Effect of different phosphorus concentrations on biodiesel production from Isochrysis zhangjiangensis under nitrogen sufficiency or deprivation condition.

The effects of two nitrogen (N) concentrations combining with three phosphorus (P) concentrations on Isochrysis zhangjiangensis growth and formation of fatty acid (FA) were investigated in this study. Biomass concentration, mass fraction, and productivity of FA in I. zhangjiangensis were low in N-deprived media. Under both N and P sufficiency conditions, the intake of P and N was 40 times and 4.7 times of the normal algal growth condition, respectively, indicating I. zhangjiangensis had the potential for removing P and N from high concentrated N and P salinity wastewater. This study also showed that P deficiency in N sufficient medium increased the FA content, however, the difference between P limitation and P deprivation was not significant (P > 0.05). In N sufficient and P limitation medium, FA productivity was the highest, with a composition suitable for biofuel, so, this condition was the optimal condition for biodiesel production from I. zhangjiangensis.

Nexus between the microbial diversity level and the stress tolerance within the biogas process.

To investigate whether there is a nexus between the microbial diversity level (taxonomic, functional and ecological) and the stress tolerance potential of the microbial community, the impact of different ammonium sources was evaluated. Therefore reactors adapted either to the anaerobic digestions of sugar beet silage or maize silage (SBS/MS) were supplemented with animal manure (M) or ammonium carbonate (A). The results showed that increasing concentrations of total ammonium nitrogen (TAN) were not the only reason for community changes: the bacterial community in the reactors given animal manure became more similar over time compared to the reactors given ammonium carbonate. However, this study revealed that a bacterial community with a few dominant members led to a functional more flexible archaeal community (SBS reactors) which was more stress resistant under the experimental conditions. This indicates that a higher functional diversity within a certain part of the community, in the present study the archaeal community, is one important factor for process stability due to a higher tolerance to increasing amounts of process-inhibiting metabolites such as TAN. Compared to this a bacterial community with higher amount of more evenly distributed community members combined with a more rigid archaeal community (MS reactors) showed a lower stress tolerance potential. Moreover it was observed that the disappearance of members of the phylum Cloacimonetes can be used as an indicator for an upcoming process disturbance due to increasing TAN concentrations.

Performance of a novel photobioreactor for nutrient removal from piggery biogas slurry: Operation parameters, microbial diversity and nutrient recovery potential.

Photobioreactor is deemed to be one of limiting factors for the commercial application of wastewater treatment based on microalgae cultivation. In this study, a novel Flat-Plate Continuous Open Photobioreactor (FPCO-PBR) was developed to treat piggery biogas slurry. The operation parameters, microbial stability and nutrient recovery potential of FPCO-PBR were investigated. Results showed that the appropriate influent mode for FPCO-PBR was multi-point or spraying mode. The optimal hydraulic retention time and interval time for biomass harvesting of FPCO-PBR were both 2 d. Nitrogen and phosphorus recovery rate were 30 mg L-1 d-1 and 7 mg L-1 d-1 respectively under optimal operating parameters. Microbial diversity remained relatively stable in FPCO-PBR. Biomass production rate of FPCO-PBR was 0.47 g L-1 d-1 under optimal operating parameters. The revenue generated from biomass was estimated to be 15.06 $ kg-1, which means that treating one ton of wastewater can generate $ 7.08 in revenue.

Lipolytic bacterial strains mediated transesterification of non-edible plant oils for generation of high quality biodiesel.

Biodiesel is one of the best alternative to depleting fossil fuels for transport sector. However, biodiesel production via lipase mediated transesterification has limitation of high costing microbial enzymes. In order to overcome this limitation, a process of sequential treatment of oil industry wastewater using isolated lipolytic bacterial strains and biodiesel production from non-edible plant oils was studied. In this study, efficient lipase producing bacteria were isolated and evaluated for production of biodiesel from mustard, soybean, jatropha and taramira oils utilizing methanol for the transesterification of oils and bioremediation. Selected strains were then identified, using 16s rRNA sequencing. Further, Bacillus subtilis strain Q1 KX712301 was optimized for biodiesel production from non-edible taramira oil via Plackett-Burman and central composite design. Highest volumetric yield of biodiesel obtained was 102% at optimized parameters. Finally, a sequential bioremediation of vegetable oil contaminated wastewater and then microbial production of biodiesel from non-edible taramira oil was carried out using efficient lipase producer B. subtilis strain Q1 at optimized conditions. During sequential process, complete chemical oxigen demand reduction of oil containing wastewater and theoretical volumetric yield of biodiesel was achieved. Gas chromatography/mass spectrometry chromatogram revealed that the total fatty acid methyl ester content of the produced biodiesel was >98% which is in accordance with the biodiesel quality standards specified by both ASTM and EU-14103.

Heterologous expression and characterization of a new lipase from Pseudomonas fluorescens Pf0-1 and used for biodiesel production.

As a kind of important biocatalysts, Pseudomonas lipases are commonly applied in various industrial fields. Pflip1, a new extracellular lipase gene from Pseudomonas. fluorescens Pf0-1, was first cloned and respectively expressed in Escherichia coli BL21(DE3) and Pichia pastoris KM71, the recombinant proteins Pflip1a and Pflip1b were later purified separately. Then Pflip1a was further characterized. The optimum pH of Pflip1a was 8.0 and its optimal temperature was 70 °C. After incubation at 70 °C for 12 h, Pflip1a could retain over 95% of its original activity. It showed the highest activity towards p-nitrophenyl caprylate. Moreover, its activity was profoundly affected by metal ion, ionic surfactants and organic solvents. Furthermore, the two obtained recombinant lipases were immobilized on the magnetic nanoparticles for biodiesel preparation. The GC analysis showed that for the immobilized lipases Pflip1b and Pflip1a, the biodiesel yield within 24 h respectively attained 68.5% and 80.5% at 70 °C. The activities of the two immobilized lipases still remained 70% and 82% after 10 cycles of operations in non-solvent system. These characteristics and transesterification capacity of the recombinant protein indicated its great potential for organic synthesis, especially for biodiesel production.

Effects of nutritional conditions on lipid production by cyanobacteria.

The present study evaluated the effects of the culturing media and the levels of nitrogen and phosphorus on the growth, biomass productivity and lipid production of four species of Microcystis (M. novacekii, M. aeruginosa, M panniformis and M. protocystis). The lipid extract was obtained by refluxing with dichloromethane (Soxhlet). The biomass and biomass productivity yields were maximized with ASM-1 medium treatment enriched with nitrogen and/or phosphorus (0.25-0.65 g/L and 25-50.7 mg/L d-1, respectively). The lipid extract yields from M. panniformis and M. novacekii were inversely correlated with the concentration of nitrogen and directly correlated with the concentration of phosphorus (35.8 % and 31.7 %). The lipid extract yield from M. aeruginosa was inversely correlated with the nutrient concentration (23.3 %). M. protocystis exhibited a higher lipid content in the control medium (41.5 %) than in the nitrogen-enriched media. The recorded results show that a nutrient-poor culture medium favours cell growth and stimulates lipid accumulation, which directly affects the cost of cultivation by reducing nutrient consumption. All studied species may serve as biomass sources for biodiesel production, although M. protocystis exhibited the highest lipid production. Further studies are necessary to determine the composition of the recorded lipid extract.

Valorization of By-Products from Palm Oil Mills for the Production of Generic Fermentation Media for Microbial Oil Synthesis.

This study demonstrates the production of a generic nutrient-rich feedstock using by-product streams from palm oil production that could be used as a substitute for commercial fermentation supplements. Solid-state fermentations of palm kernel cake (PKC) and palm-pressed fiber (PPF) were conducted in tray bioreactors and a rotating drum bioreactor by the fungal strain Aspergillus oryzae for the production of crude enzymes. The production of protease was optimized (319.3 U/g) at an initial moisture content of 55 %, when PKC was used as the sole substrate. The highest free amino nitrogen (FAN) production (5.6 mg/g) obtained via PKC hydrolysis using the crude enzymes produced via solid-state fermentation was achieved at 50 °C. Three initial PKC concentrations (48.7, 73.7, and 98.7 g/L) were tested in hydrolysis experiments, leading to total Kjeldahl nitrogen to FAN conversion yields up to 27.9 %. Sequential solid-state fermentation followed by hydrolysis was carried out in the same rotating drum bioreactor, leading to the production of 136.7 U/g of protease activity during fermentation and 196.5 mg/L of FAN during hydrolysis. Microbial oil production was successfully achieved with the oleaginous yeast strain Lipomyces starkeyi DSM 70296 cultivated on the produced PKC hydrolysate mixed with commercial carbon sources, including glucose, xylose, mannose, galactose, and arabinose.

Effects of nutritional conditions on lipid production by cyanobacteria

ABSTRACT The present study evaluated the effects of the culturing media and the levels of nitrogen and phosphorus on the growth, biomass productivity and lipid production of four species of Microcystis (M. novacekii, M. aeruginosa, M panniformis and M. protocystis). The lipid extract was obtained by refluxing with dichloromethane (Soxhlet). The biomass and biomass productivity yields were maximized with ASM-1 medium treatment enriched with nitrogen and/or phosphorus (0.25-0.65 g/L and 25-50.7 mg/L d-1, respectively). The lipid extract yields from M. panniformis and M. novacekii were inversely correlated with the concentration of nitrogen and directly correlated with the concentration of phosphorus (35.8 % and 31.7 %). The lipid extract yield from M. aeruginosa was inversely correlated with the nutrient concentration (23.3 %). M. protocystis exhibited a higher lipid content in the control medium (41.5 %) than in the nitrogen-enriched media. The recorded results show that a nutrient-poor culture medium favours cell growth and stimulates lipid accumulation, which directly affects the cost of cultivation by reducing nutrient consumption. All studied species may serve as biomass sources for biodiesel production, although M. protocystis exhibited the highest lipid production. Further studies are necessary to determine the composition of the recorded lipid extract.

Simultaneous Saccharification and Fermentation of Sugar Beet Pulp for Efficient Bioethanol Production.

Sugar beet pulp, a byproduct of sugar beet processing, can be used as a feedstock in second-generation ethanol production. The objective of this study was to investigate the effects of pretreatment, of the dosage of cellulase and hemicellulase enzyme preparations used, and of aeration on the release of fermentable sugars and ethanol yield during simultaneous saccharification and fermentation (SSF) of sugar beet pulp-based worts. Pressure-thermal pretreatment was applied to sugar beet pulp suspended in 2% w/w sulphuric acid solution at a ratio providing 12% dry matter. Enzymatic hydrolysis was conducted using Viscozyme and Ultraflo Max (Novozymes) enzyme preparations (0.015-0.02 mL/g dry matter). Two yeast strains were used for fermentation: Ethanol Red (S. cerevisiae) (1 g/L) and Pichia stipitis (0.5 g/L), applied sequentially. The results show that efficient simultaneous saccharification and fermentation of sugar beet pulp was achieved. A 6 h interval for enzymatic activation between the application of enzyme preparations and inoculation with Ethanol Red further improved the fermentation performance, with the highest ethanol concentration reaching 26.9 ± 1.2 g/L and 86.5 ± 2.1% fermentation efficiency relative to the theoretical yield.

Isolation, identification and characterization of Paenibacillus polymyxa CR1 with potentials for biopesticide, biofertilization, biomass degradation and biofuel production.

BACKGROUND: Paenibacillus polymyxa is a plant-growth promoting rhizobacterium that could be exploited as an environmentally friendlier alternative to chemical fertilizers and pesticides. Various strains have been isolated that can benefit agriculture through antimicrobial activity, nitrogen fixation, phosphate solubilization, plant hormone production, or lignocellulose degradation. However, no single strain has yet been identified in which all of these advantageous traits have been confirmed. RESULTS: P. polymyxa CR1 was isolated from degrading corn roots from southern Ontario, Canada. It was shown to possess in vitro antagonistic activities against the common plant pathogens Phytophthora sojae P6497 (oomycete), Rhizoctonia solani 1809 (basidiomycete fungus), Cylindrocarpon destructans 2062 (ascomycete fungus), Pseudomonas syringae DC3000 (bacterium), and Xanthomonas campestris 93-1 (bacterium), as well as Bacillus cereus (bacterium), an agent of food-borne illness. P. polymyxa CR1 enhanced growth of maize, potato, cucumber, Arabidopsis, and tomato plants; utilized atmospheric nitrogen and insoluble phosphorus; produced the phytohormone indole-3-acetic acid (IAA); and degraded and utilized the major components of lignocellulose (lignin, cellulose, and hemicellulose). CONCLUSIONS: P. polymyxa CR1 has multiple beneficial traits that are relevant to sustainable agriculture and the bio-economy. This strain could be developed for field application in order to control pathogens, promote plant growth, and degrade crop residues after harvest.