Effect of EDTA conditioning on cervical restorations bonded with a self-etch adhesive: A randomized double-blind clinical trial.

OBJECTIVE: To compare the 18-month retention rates of composite restorations in non-carious cervical lesions [NCCLs] bonded with a self-etch adhesive with and without preliminary conditioning with EDTA. METHODS: Forty-eight patients with two similar-sized NCCL were selected and randomly allocated to one of two groups. Two calibrated operators placed 96 restorations with a one-step self-etch adhesive (Adper Easy One, 3M ESPE). Half of the restorations were placed according to the manufacturer's instructions while, for the other half, the surfaces of the lesions were conditioned with 17% EDTA for 2 min prior to adhesive application. Two blinded and independent examiners evaluated the restorations at baseline, 6, 12, and 18 months, according to the FDI criteria. The comparison between groups in each period was conducted with the Fisher's exact test, and the performance of each group at the different periods was evaluated by McNemar's test (α=0.05). RESULTS: After 18 months, significantly higher retention rates (95% CI) were observed for the EDTA group (95.5 [84.9-98.7]) than the control group (79.6% [65.5-88.9]) (p=0.02). Significant deterioration of the marginal adaptation and marginal discoloration were observed for both groups over the 18-month evaluation. CONCLUSIONS: The preliminary conditioning with EDTA before application of a one-step self-etch adhesive significantly improved the retention rates of composite restorations in cervical lesions. CLINICAL SIGNIFICANCE: Conditioning with EDTA is an alternative that improves the 18-month retention rate of cervical restorations bonded with a self-etch adhesive.

Effect of beverages on color and translucency of new tooth-colored restoratives.

This investigation examined the susceptibility to staining and translucency changes of some new tooth-colored restorative materials after immersion in different beverages. The materials studied were 3M Filtek Z350XT (ZT), 3M Filtek 350XT Flowable Restorative (ZF), Shofu Beautifil Flow Plus (BF), Shofu Beautifil II (B2), 3M Ketac Nano (N100), and 3M Photac Fil (PF). Following the manufacturers' instructions, 42 samples were made from each material and placed in an incubator at 100% humidity and 37°Celsius for 24 hours. Baseline L*, a*, b* readings were taken against white and black backgrounds using a photospectrometer. The samples were then randomly assigned to be immersed in seven beverages, namely cola drink, orange juice, red wine, vodka, black coffee, green tea, and distilled water for a period of seven days. Color readings were taken again by recording the L*, a*, b* values. Data was analyzed using t-tests, one-way analysis of variance with Tukey post hoc and Pearson's correlation (p<0.05). BF generally performed as well as the conventional composite resin materials (ZT and ZF) but N100 and B2 did not. PF had the largest staining and translucency changes. Coffee, red wine, and tea resulted in the most staining and negative translucency changes. An inverse correlation between ΔE and ΔTP was observed for all materials and beverages with the exception of orange juice.

Inhibition of enamel mineral loss by fissure sealant: an in situ study.

OBJECTIVES: This study evaluated the effect of fluoride and non-fluoride sealants on hardness decrease (HD) and marginal adaptation (MA) on enamel substrates after cariogenic challenge. METHODS: Occlusal enamel blocks, from human third molars, were randomly divided into six groups (n=12), according to occlusal fissures condition (S - sound; C - caries-like lesion; CF - caries-like lesion+topical fluoride) and sealants (F - FluroShield; H - Helioseal Clear Chroma). Lesion depths were 79.3±33.9 and 61.3±23.9 for C and CF groups, respectively. Sealants were placed on occlusal surface and stored at 100% humidity (37°C; 24h/d). HD was measured by cross-sectional microhardness analysis at the sealant margin distances: -1 (under sealant), 0 (sealant margin), 1, 2 (outer sealant). Sealant MA was observed by polarized light microscopy and scored according to: 0 - failure (no sealant MA or total sealant loss); 1 - success (sealant MA present). MA and HD were analysed by ANOVA-R and mixed model analysis, respectively. RESULTS: For HD (ΔS), F values (6900.5±3686.6) were significantly lower than H values (8534.6±5375.3) regardless of enamel substrates and sealant margin distances. Significant differences were observed among sealant margin distances: -1 (5934.0±3282.6)<0 (8701.5±6175.7)=1 (8473.2±4299.4)=2 (7761.5±4035.1), regardless of sealant and substrate. MA was similar for all groups (p≥0.05). CONCLUSION: MA was not affected by sealant type or substrate condition, whereas enamel HD was favourably impacted by fluoride in the sealant. In addition, sealants were more effective as a physical barrier than as its chemical potency in reducing enamel HD. CLINICAL SIGNIFICANCE: Sealing with a fluoride material is a recommended procedure to prevent caries of occlusal permanent molars in high-caries-risk patients, even though those exhibiting white spot lesions, since the enamel hardness decrease when fluoride sealant was used in vitro.

In situ evaluation of the remineralizing capacity of pit and fissure sealants containing amorphous calcium phosphate and/or fluoride.

OBJECTIVE: This in situ study evaluated the remineralizing potential of pit and fissure sealants containing amorphous calcium phosphate (ACP) and/or fluoride in artificially induced carious lesions on smooth enamel surfaces. MATERIAL AND METHODS: Ten volunteers who wore acrylic palatal devices were enrolled in this 5-day double-blind study and assigned to one of the following five groups: (I) demineralized enamel slab+Fluroshield (sealant with fluoride); (II) demineralized enamel slab+Aegis (sealant with ACP); (III) demineralized enamel slab+experimental sealant with fluoride (ESF); (IV) demineralized enamel slab+experimental sealant with fluoride/ACP (ACP-F); and (V) demineralized enamel slab (control). After the experimental period, the percentage of surface microhardness recovery (%SMHR) and the integrated loss of subsurface hardness (DeltaKHN) were evaluated. The concentrations of fluoride, calcium and phosphorus in enamel were also determined. RESULTS: The sealants containing ACP and/or fluoride presented a higher remineralizing capacity (%SMHR and DeltaKHN) than that of the control group. Aegis provided either more efficient or similar remineralization than the other sealants. The association between ACP and fluoride did not show a greater efficacy in the remineralization. F, Ca and P concentrations in enamel varied according to the group. CONCLUSION: The pit and fissure sealants containing ACP were able to promote remineralization of artificially induced carious lesions on smooth enamel surfaces.

Dentine-bonded resin composite (Retroplast) for root-end filling: a prospective clinical and radiographic study with a mean follow-up period of 8 years.

AIM: To evaluate treatment outcome after using a resin composite (Retroplast, RP) in combination with a dentine-bonding agent (GLUMA) as root-end filling material after 1 year as well as after more than 5 years (final examination). Also, the influence of various pre-, intra- and postoperative factors on the treatment outcome was studied. METHODOLOGY: All patients (87) undergoing root-end resection consecutively treated by root-end filling with RP on an incisor, canine, pre-molar, or first molar (87 teeth, 118 roots) were initially enrolled in the study. RP was applied on the entire resected surface that was prepared to a slightly concave shape and after conditioning with EDTA and GLUMA. The treatment outcome involving subjective, clinical and radiographic parameters was evaluated after 1 year and at the final examination. A total of 27 patients (36 roots) were excluded from the study because of unavailability of follow-up (19) and extraction of the operated tooth for reasons other than failed surgery (8). Consequently, 60 patients (82 roots) were included in the final material. The mean follow-up period at the final examination was 8 years (range: 6.5-9 years). RESULTS: The radiographic evaluation at the final examination revealed that 77%, 5%, 7% and 11% of the treated roots were characterized by complete, incomplete, uncertain and unsatisfactory healing, respectively. A total of 95% of the roots classified as completely healed at the 1-year control were also completely healed at the final examination. Two roots (5%) showing complete healing at the 1-year control revealed unsatisfactory healing at the final examination because of displaced or lost RP-filling. Moreover, 60% of the roots with uncertain healing at the 1-year control demonstrated complete or incomplete healing at the final examination. The classification according to subjective, clinical and radiographic parameters revealed that 78% of the teeth were characterized by a successful treatment outcome at the final examination. Evaluation of the influence of various pre-, intra- and postoperative factors on the treatment outcome revealed that the radiographic classification at the final examination was exclusively influenced by the radiographic classification at the 1-year control (P < 0.001). CONCLUSIONS: The present long-term study indicates that RP can be used for root-end filling with a successful treatment outcome.

Microleakage at the composite-repair interface: effect of different surface treatment methods.

This study evaluated microleakage at the composite-repair interface after using different methods of surface treatment. Eighty resin composite specimens (Filtek Z250, 3M Dental Products) aged in artificial saliva for three months were divided into four groups (n=20) according to the following surface treatment methods: untreated control-no roughening or abrasion of the surface; roughening with diamond burs; jet prophylaxis with sodium bicarbonate particles and air abrasion with 50 microm aluminum oxide particles. Each method was examined using scanning electron microscopy (SEM) to evaluate changes in surface topography. All groups were then etched with 37% phosphoric acid, coated with a bonding agent (Single Bond, 3M Dental Products) and received new resin applications. The samples were then thermocycled (800 cycles/5 degrees C to 55 degrees C [+/- 2]) and immersed in 2% methylene blue buffered dye solution (7.0 pH) for four hours. Three examiners measured the extent of microleakage in a stereoscope microscope using four representative scores. For all experimental groups, no significant difference in repair microleakage was identified by the Kruskal-Wallis test (p>0.05). Therefore, different testing methods of surface treatment showed the same effect on dye penetration along the repair interface.

The effect on coronal leakage of liquid adhesive application over root fillings after smear layer removal with EDTA or Er:YAG laser.

OBJECTIVE: To evaluate coronal microleakage in filled root canals that received different biomechanical preparations and application of liquid adhesives over the root filling and the pulp chamber walls. STUDY DESIGN: Root canals of 94 extracted canine teeth were filled after being biomechanically prepared with 1% sodium hypochlorite and divided into 3 groups. In 2 groups attempts were made to remove the smear layer with either 17% EDTA or Er:YAG laser irradiation (10 Hz, 250 mJ input, 112 mJ output). Liquid adhesive (Super Bonder and Single Bond adhesive) was applied and the teeth were immersed for 90 days in India ink. RESULTS: Statistically significant differences were found for the different preparations, the use of liquid adhesives, and the different liquid adhesives. The use of Er:YAG laser, EDTA, and the liquid adhesive reduced coronal microleakage (P < .01). CONCLUSIONS: Because of the risk of coronal microleakage, endodontically treated teeth should be restored as quickly as possible.

Drying and rewetting anterior crown fragments prior to bonding.

Fractured anterior teeth can be restored by adhesive bonding of the fragment to the remaining tooth structure. This in vitro study describes the effect on fracture strength of fragments dried and rewetted for various periods of time prior to bonding. Seventy central incisors from sheep were fractured. The resulting incisal crown fragments were then stored in air at room temperature at ambient humidity (70 +/- 16%) for 5 s, 30 min, 1 h, 3 h, 6 h, 12 h, or 24 h. The apical parts of the fractured teeth were stored in water. After storage in air each fragment was then bonded to the matching apical tooth structure with a bonding agent and a low-viscosity composite resin. After water storage for 2 days, mean fracture strength was measured. Another group of teeth comprising 40 sheep central incisors was fractured and the fragments were stored in air at room temperature for 24 h as above. The fragments were then immersed in water for 10 min, 1 h, 1 day, or 7 days, prior to bonding and measurement as described above. Statistical analysis revealed that the fracture strength of the fragment-bonded teeth was unaffected by air storage of the fragment for up to 1 h prior to bonding, after which additional drying resulted in decreased fracture strength. Fragments dried for 24 h in air and rewetted by immersion in water for at least 1 day were fragment-bonded without loss of fracture strength.