Elastic shell theory for plant cell wall stiffness reveals contributions of cell wall elasticity and turgor pressure in AFM measurement.

The stiffness of a plant cell in response to an applied force is determined not only by the elasticity of the cell wall but also by turgor pressure and cell geometry, which affect the tension of the cell wall. Although stiffness has been investigated using atomic force microscopy (AFM) and Young's modulus of the cell wall has occasionally been estimated using the contact-stress theory (Hertz theory), the existence of tension has made the study of stiffness more complex. Elastic shell theory has been proposed as an alternative method; however, the estimation of elasticity remains ambiguous. Here, we used finite element method simulations to verify the formula of the elastic shell theory for onion (Allium cepa) cells. We applied the formula and simulations to successfully quantify the turgor pressure and elasticity of a cell in the plane direction using the cell curvature and apparent stiffness measured by AFM. We conclude that tension resulting from turgor pressure regulates cell stiffness, which can be modified by a slight adjustment of turgor pressure in the order of 0.1 MPa. This theoretical analysis reveals a path for understanding forces inherent in plant cells.

Cytomembrane visualization using Stokes parameter confocal microscopy.

A new, to the best of our knowledge, method for Stokes vector imaging is proposed to achieve imaging and dynamic monitoring of a non-labeled cytomembrane. In this work, a polarization state vector is described by a Stokes vector and expressed in chrominance space. A physical quantity called polarization chromaticity value (PCV) corresponding to a Stokes vector is used as the imaging parameter to perform Stokes vector imaging. By using the PCV imaging technique, the Stokes vector can be expressed in three-dimensional real space rather than in a Poincare sphere. Furthermore, a four-way Stokes parameter confocal microscopy system is designed to measure four Stokes parameters simultaneously and obtain micro-imaging. Label-free living onion cell membranes and their plasmolysis process are selected as the representative micro-anisotropy experimental analysis. It is proved that PCV imaging can perform visualization of cytomembranes, and further, microscopic orientation is demonstrated. The prospect of universal measurement of anisotropy details for analysis and diagnosis is provided.

The FLA4-FEI Pathway: A Unique and Mysterious Signaling Module Related to Cell Wall Structure and Stress Signaling.

Cell wall integrity control in plants involves multiple signaling modules that are mostly defined by genetic interactions. The putative co-receptors FEI1 and FEI2 and the extracellular glycoprotein FLA4 present the core components of a signaling pathway that acts in response to environmental conditions and insults to cell wall structure to modulate the balance of various growth regulators and, ultimately, to regulate the performance of the primary cell wall. Although the previously established genetic interactions are presently not matched by intermolecular binding studies, numerous receptor-like molecules that were identified in genome-wide interaction studies potentially contribute to the signaling machinery around the FLA4-FEI core. Apart from its function throughout the model plant Arabidopsis thaliana for the homeostasis of growth and stress responses, the FLA4-FEI pathway might support important agronomic traits in crop plants.

Effect of freeze-thaw cycles pretreatment on the vacuum freeze-drying process and physicochemical properties of the dried garlic slices.

Freeze-thaw cycles (FTC) pretreatment was employed before the vacuum freeze-drying of garlic slices, aimed at improving the drying process and the quality of the end product. Cell viability, water status, internal structure, flavor, chemical composition and thermogravimetric of garlic samples were evaluated. The results indicated that FTC pretreatment reduced the drying time (22.22%-33.33%) and the energy consumption (14.25%-15.50%), owing to the water loss, the increase in free water, and the formation of porous structures. The FTC pretreatment improved thermal stability, flavor and chemical composition content of dried products. The antioxidant activity of polysaccharides extracted from FTC pretreated dried products was higher than that of the unpretreated dried product due to the reduction in polysaccharide molecular weight. This research could pave a route for future production of dried garlic slices having good quality by using the FTC pretreatment, with lower energy consumption and shorter drying time.

Auxin treatment of grapevine (Vitis vinifera L.) berries delays ripening onset by inhibiting cell expansion.

KEY MESSAGE: Auxin treatment of grape (Vitis vinifera L.) berries delays ripening by inducing changes in gene expression and cell wall metabolism and could combat some deleterious climate change effects. Auxins are inhibitors of grape berry ripening and their application may be useful to delay harvest to counter effects of climate change. However, little is known about how this delay occurs. The expression of 1892 genes was significantly changed compared to the control during a 48 h time-course where the auxin 1-naphthaleneacetic acid (NAA) was applied to pre-veraison grape berries. Principal component analysis showed that the control and auxin-treated samples were most different at 3 h post-treatment when approximately three times more genes were induced than repressed by NAA. There was considerable cross-talk between hormone pathways, particularly between those of auxin and ethylene. Decreased expression of genes encoding putative cell wall catabolic enzymes (including those involved with pectin) and increased expression of putative cellulose synthases indicated that auxins may preserve cell wall structure. This was confirmed by immunochemical labelling of berry sections using antibodies that detect homogalacturonan (LM19) and methyl-esterified homogalacturonan (LM20) and by labelling with the CMB3a cellulose-binding module. Comparison of the auxin-induced changes in gene expression with the pattern of these genes during berry ripening showed that the effect on transcription is a mix of changes that may specifically alter the progress of berry development in a targeted manner and others that could be considered as non-specific changes. Several lines of evidence suggest that cell wall changes and associated berry softening are the first steps in ripening and that delaying cell expansion can delay ripening providing a possible mechanism for the observed auxin effects.

Long-term holographic phase-contrast time lapse reveals cytoplasmic circulation in dehydrating plant cells.

The intracellular dynamics of onion epidermal cells during the dehydration process is observed by holographic microscopy. Both the nucleus and cytoplasm are accurately revealed by quantitative phase imaging while dehydration takes place. Indeed, we notice that the contrast of phase images increases with the decrease in cellular water content. We foresee that such a dehydrating process can be effective for improving phase contrast, thus permitting better imaging of plant cells with the scope of learning more about cellular dynamics and related phenomena. Exploiting this concept, we observe intracellular cytoplasmic circulation and transport of biological material.

Getting into shape: the mechanics behind plant morphogenesis.

The process of shape change in cells and tissues inevitably involves the modification of structural elements, therefore it is necessary to integrate mechanics with biochemistry to develop a full understanding of morphogenesis. Here, we discuss recent findings on the role of biomechanics and biochemical processes in plant cell growth and development. In particular, we focus on how the plant cytoskeleton components, which are known to regulate morphogenesis, are influenced by biomechanical stress. We also discuss new insights into the role that pectin plays in biomechanics and morphogenesis. Using the jigsaw-shaped pavement cells of the leaf as a case study, we review new findings on the biomechanics behind the morphogenesis of these intricately-shaped cell types. Finally, we summarize important quantitative techniques that has allowed for the testing and the generation of hypotheses that link biomechanics to morphogenesis.

Low-Boron Tolerance Strategies Involving Pectin-Mediated Cell Wall Mechanical Properties in Brassica napus.

Boron (B) is an essential micronutrient for the growth and development of plants. Oilseed rape (Brassica napus L.) is a staple oleaginous crop, which is greatly susceptible to B deficiency. Significant differences in tolerance of low-B stresses are observed in rapeseed genotypes, but the underlying mechanism remains unclear, particularly at the single-cell level. Here we provide novel insights into pectin-mediated cell wall (CW) mechanical properties implicated in the differential tolerance of low B in rapeseed genotypes. Under B deficiency, suspension cells of the low-B-sensitive genotype 'W10' showed more severely deformed morphology, lower viabilities and a more easily ruptured CW than those of the low-B-tolerant genotype 'QY10'. Cell rupture was attributed to the weakened CW mechanical strength detected by atomic force microscopy; the CW mechanical strength of 'QY10' was reduced by 13.6 and 17.4%, whereas that of 'W10' was reduced by 29.0 and 30.4% under 0.25 and 0.10 µM B conditions, respectively. The mechanical strength differences between 'QY10' and 'W10' were diminished after the removal of pectin. Further, 'W10' exhibited significantly higher pectin concentrations with much more rhamnogalacturonan II (RG-II) monomer, and also presented obviously higher mRNA abundances of pectin biosynthesis-related genes than 'QY10' under B deficiency. CW regeneration was more difficult for protoplasts of 'W10' than for those of 'QY10'. Taking the results together, we conclude that the variations in pectin-endowed CW mechanical properties play key roles in modulating the differential genotypic tolerance of rapeseed to low-B stresses at both the single-cell and the plant level, and this can potentially be used as a selection trait for low-B-tolerant rapeseed breeding.

Phyto-mediated metallic nano-architectures via Melissa officinalis L.: synthesis, characterization and biological properties.

The development of methods for obtaining new materials with antimicrobial properties, based on green chemistry principles has been a target of research over the past few years. The present paper describes the phyto-mediated synthesis of metallic nano-architectures (gold and silver) via an ethanolic extract of Melissa officinalis L. (obtained by accelerated solvent extraction). Different analytic methods were applied for the evaluation of the extract composition, as well as for the characterization of the phyto-synthesized materials. The cytogenotoxicity of the synthesized materials was evaluated by Allium cepa assay, while the antimicrobial activity was examined by applying both qualitative and quantitative methods. The results demonstrate the synthesis of silver nanoparticles (average diameter 13 nm) and gold nanoparticles (diameter of ca. 10 nm); the bi-metallic nanoparticles proved to have a core-shell flower-like structure, composed of smaller particles (ca. 8 nm). The Ag nanoparticles were found not active on nuclear DNA damage. The Au nanoparticles appeared nucleoprotective, but were aggressive in generating clastogenic aberrations in A. cepa root meristematic cells. Results of the antimicrobial assays show that silver nanoparticles were active against most of the tested strains, as the lowest MIC value being obtained against B. cereus (approx. 0.0015 mM).

Cell separation in kiwifruit without development of a specialised detachment zone.

BACKGROUND: Unlike in abscission or dehiscence, fruit of kiwifruit Actinidia eriantha develop the ability for peel detachment when they are ripe and soft in the absence of a morphologically identifiable abscission zone. Two closely-related genotypes with contrasting detachment behaviour have been identified. The 'good-peeling' genotype has detachment with clean debonding of cells, and a peel tissue that does not tear. The 'poor-peeling' genotype has poor detachability, with cells that rupture upon debonding, and peel tissue that fragments easily. RESULTS: Structural studies indicated that peel detachability in both genotypes occurred in the outer pericarp beneath the hypodermis. Immunolabelling showed differences in methylesterification of pectin, where the interface of labelling coincided with the location of detachment in the good-peeling genotype, whereas in the poor-peeling genotype, no such interface existed. This zone of difference in methylesterification was enhanced by differential cell wall changes between the peel and outer pericarp tissue. Although both genotypes expressed two polygalacturonase genes, no enzyme activity was detected in the good-peeling genotype, suggesting limited pectin breakdown, keeping cell walls strong without tearing or fragmentation of the peel and flesh upon detachment. Differences in location and amounts of wall-stiffening galactan in the peel of the good-peeling genotype possibly contributed to this phenotype. Hemicellulose-acting transglycosylases were more active in the good-peeling genotype, suggesting an influence on peel flexibility by remodelling their substrates during development of detachability. High xyloglucanase activity in the peel of the good-peeling genotype may contribute by having a strengthening effect on the cellulose-xyloglucan network. CONCLUSIONS: In fruit of A. eriantha, peel detachability is due to the establishment of a zone of discontinuity created by differential cell wall changes in peel and outer pericarp tissues that lead to changes in mechanical properties of the peel. During ripening, the peel becomes flexible and the cells continue to adhere strongly to each other, preventing breakage, whereas the underlying outer pericarp loses cell wall strength as softening proceeds. Together these results reveal a novel and interesting mechanism for enabling cell separation.

Taxanes content and cytotoxicity of hazel cells extract after elicitation with silver nanoparticles.

The toxicity of silver nanoparticles (AgNPs) has been attributed to the generation of Ag+ ions as well as production of ROS. The latter can elicit defensive response of plant cells in different ways e.g., enhancement of secondary metabolite productions. In the present study this hypothesis was evaluated by assessment of taxanes production by suspension-cultured hazel (Corylus avellana L.) cells after treatment with AgNPs. The cells were treated with different concentrations of AgNPs (0, 2.5, 5, and 10 ppm), in their logarithmic growth phase (d7) and were harvested after 1 weak. The growth of cells and their membrane integrity decreased but extracellular electro conductivity and total dissolved solids increase by AgNPs (probably due to loosening of cell membrane). Treatment of hazel cells with AgNPs (in particular of 5 ppm) rapidly and remarkably increased the yields of two major taxanes, i.e., Taxol and baccatin III; so that 24 h of the treatment their contents reached to 378% and 163% of the control, respectively. Increase of Taxanes was accompanied by the increase of total soluble phenols. The extracts of AgNPs-treated cells were able to inhibit the growth of cancerous HeLa cells and reduce their viability to 60% of the control. The results suggest the elicitation of suspension-cultured hazel cells with AgNPs as a procedure for rapid enhancement of anticancer taxanes biosynthesis by the cells.

Behavior of nucleolus in the tobacco male meiocytes involved in cytomixis.

Behavior of nucleolus during the nuclear migration between plant cells (cytomixis) is studied for the first time in the tobacco male meiosis. As is shown, the nucleolus is located in a nonrandom manner in the migrating nuclei. In the majority of cases, the nucleolus resides on the nuclear pole strictly opposite to the cytomictic channel. Owing to this localization, the nucleolus extremely rare enters the recipient cell, so that the nucleolar material is in most cases undetectable in the micronuclei formed after cytomixis. When a whole nucleus migrates from a donor cell to recipient, the nucleolus can leave the nucleus and remain in the donor cells either alone or with a small amount of chromatin. The causes underlying a nonrandom location of the nucleolus in cytomictic cells are discussed. It is assumed that the nucleolar material contacts the cytoplasmic cytoskeleton, which prevents migration of the nucleolus into another cell within the nucleus. The potential use of cytomixis as a model for studying the nuclear motion is discussed.

Cell polarity in plants: the Yin and Yang of cellular functions.

Spatial organization is fundamental for the performance of living organisms and is reflected in a distinct distribution of structures and molecules down to the subcellular level. In particular, eukaryotic cells harbor a vast range of possibilities for distributing organelles, the cytoskeleton or the extracellular matrix in an active and highly regulated manner. An asymmetric or polar distribution is rather the rule than the exception and often reflects a particular position or orientation of a cell within a multicellular body. Here, we highlight recent insights into the regulation of cell polarity in plants and reveal the interactive nature of underlying molecular processes.

Composition and structure of tuber cell walls affect in vitro digestibility of potato (Solanum tuberosum L.).

The digestibility of starchy foods, such as potatoes, can be characterized by the proportion of starch that is rapidly digestible by in vitro hydrolysis (rapidly digestible starch, RDS). This study evaluated the RDS content in a potato germplasm collection consisting of 98 genotypes and identified three advanced lines, Crop39, Crop71 and Crop85, where cooked potato RDS content was significantly lower than that of their respective isolated starches (P < 0.05). In Crop39, Crop71 and Crop85, the properties of their isolated starch did not differ significantly from that of five control lines with higher RDS contents. Cell wall analyses revealed that, compared with other lines tested, Crop39, Crop71 and Crop85 had at least four times the amount of rhamnogalacturonan-I (RG-I) galactan side-chains that were very firmly attached to the wall and requiring 4 M KOH for extraction. Pectin solubilization during cooking was also remarkably low (2-4%) in these three lines compared with other lines tested (7-19%). The findings suggest that possession of higher amounts of RG-I galactan that interact strongly with cellulose may provide a sturdier wall that better resists solubilization during cooking, and effectively impedes access of digestive enzymes for starch hydrolysis in an in vitro model.

Cell dedifferentiation, callus induction and somatic embryogenesis in Crataegus spp.

The present study describes the effects of light conditions, different kinds and concentrations of auxins [Naphthylacetic acid (NAA) and dichlorophenoxyacetic acid (2,4-D)] with cytokinin (Kin) in MS medium on callus induction and embryogenesis in Crataegus pseudoheterophylla, C. aronia and C.meyeri. At first leave explants sections were cultured on different combinations of plant growth regulators in dark and light for callus initiation and light conditions to evaluation the percentage and duration of survival, callus diameter, callus fresh weight and dry. Results of effects of plant growth regulators and light conditions on callus initiation revealed that highest percentage of callus initiation leaves in treatment (0.5 mg/l 2.4-D+0.5 mg/l KIN) for species C.pseudoheterophylla in dark conditions (100%). Dark conditions (100%) were more effective on callogenesis than light conditions (Photoperiodicity of 16-h and at light intensity of 40 µmol m-2 s-1). The callus induction of in vitro (64-100%) leaves was better than the ex vitro ones (0-100%). The combination of 2,4-D and Kin of in vitro leaves callogenesis has been indicated faster (one weeks) than the other combinations. The results also showed that the highest percentage (100%) and survival duration (6 months) was found in species C. pseudoheterophylla and C. meyeri in 0.1 mg/l 2,4.D + 0.5 mg/l KIN and 0.5 mg/l 2,4.D + 0.5 mg/l Kin. The minimum survival (0%) was absorbed in species C. aronia in 1 mg/l NAA. Maximum callus (10.63 and 10.00 mm respectively) was shown in 0.1 mg/l 2,4.D + 0.5 mg/l Kin and 0.5 mg/l 2,4.D + 0.5 mg/l Kin and was not significant differences after five week among species. The results showed that the highest fresh (1081.49 mg) and dry weight (506.88 and 506.98 mg respectively) was absorbed in species C. pseudoheterophylla in 0.1 mg/l 2,4.D + 0.5 mg/l Kin and 0.5 mg/l 2,4.D + 0.5 mg/l Kin. The embryogenesis was not occurred in any plant growth regulator combinations and species. The results of this study suggested that using 2,4-D with cytokinin (Kin) would be more beneficial for callogenesis.

Bio-compatible organic humidity sensor transferred to arbitrary surfaces fabricated using single-cell-thick onion membrane as both the substrate and sensing layer.

A bio-compatible disposable organic humidity sensor has been fabricated that can be transferred to any arbitrary target surface. Single cell thick onion membrane has been used as the substrate while it also doubles as the active layer of the sensor. Two different types of sensors were fabricated. In type-1, the membrane was fixed into a plastic frame with IDT patterns on one side while the other side was also exposed to environment. In type-2, onion membrane was attached to a glass substrate with one side exposed to environment having an IDT screen-printed on top of it. The electrical output response of the sensors showed their ability to detect relative humidity between 0% RH and 80% RH with stable response and good sensitivity. The impedance of the sensors changed from 16 MΩ to 2 MΩ for type-1 and 6 MΩ to 20 KΩ for type-2. The response times of type-1 and type-2 were ~1 and 1.5 seconds respectively. The recovery times were ~10.75 seconds and ~11.25 seconds for type-1 and type-2 respectively. The device was successfully transferred to various randomly shaped surfaces without damaging the device.

The Transcription Factor NIN-LIKE PROTEIN7 Controls Border-Like Cell Release.

The root cap covers the tip of the root and functions to protect the root from environmental stress. Cells in the last layer of the root cap are known as border cells, or border-like cells (BLCs) in Arabidopsis (Arabidopsis thaliana). These cells separate from the rest of the root cap and are released from its edge as a layer of living cells. BLC release is developmentally regulated, but the mechanism is largely unknown. Here, we show that the transcription factor NIN-LIKE PROTEIN7 (NLP7) is required for the proper release of BLCs in Arabidopsis. Mutations in NLP7 lead to BLCs that are released as single cells instead of an entire layer. NLP7 is highly expressed in BLCs and is activated by exposure to low pH, a condition that causes BLCs to be released as single cells. Mutations in NLP7 lead to decreased levels of cellulose and pectin. Cell wall-loosening enzymes such as CELLULASE5 (CEL5) and a pectin lyase-like gene, as well as the root cap regulators SOMBRERO and BEARSKIN1/2, are activated in nlp7-1 seedlings. Double mutant analysis revealed that the nlp7-1 phenotype depends on the expression level of CEL5 Mutations in NLP7 lead to an increase in susceptibility to a root-infecting fungal pathogen. Together, these data suggest that NLP7 controls the release of BLCs by acting through the cell wall-loosening enzyme CEL5.

Plant cell wall extensibility: connecting plant cell growth with cell wall structure, mechanics, and the action of wall-modifying enzymes.

The advent of user-friendly instruments for measuring force/deflection curves of plant surfaces at high spatial resolution has resulted in a recent outpouring of reports of the 'Young's modulus' of plant cell walls. The stimulus for these mechanical measurements comes from biomechanical models of morphogenesis of meristems and other tissues, as well as single cells, in which cell wall stress feeds back to regulate microtubule organization, auxin transport, cellulose deposition, and future growth directionality. In this article I review the differences between elastic modulus and wall extensibility in the context of cell growth. Some of the inherent complexities, assumptions, and potential pitfalls in the interpretation of indentation force/deflection curves are discussed. Reported values of elastic moduli from surface indentation measurements appear to be 10- to >1000-fold smaller than realistic tensile elastic moduli in the plane of plant cell walls. Potential reasons for this disparity are discussed, but further work is needed to make sense of the huge range in reported values. The significance of wall stress relaxation for growth is reviewed and connected to recent advances and remaining enigmas in our concepts of how cellulose, hemicellulose, and pectins are assembled to make an extensible cell wall. A comparison of the loosening action of α-expansin and Cel12A endoglucanase is used to illustrate two different ways in which cell walls may be made more extensible and the divergent effects on wall mechanics.

A proposed role for selective autophagy in regulating auxin-dependent lateral root development under phosphate starvation in Arabidopsis.

Plants respond to limited soil nutrient availability by inducing more lateral roots (LR) to increase the root surface area. At the cellular level, nutrient starvation triggers the process of autophagy through which bulk degradation of cellular materials is achieved to facilitate nutrient mobilization. Whether there is any link between the cellular autophagy and induction of LR had remained unknown. We recently showed that the S-Domain receptor Kinase (ARK2) and U Box/Armadillo Repeat-Containing E3 ligase (PUB9) module is required for lateral root formation under phosphate starvation in Arabidopsis thaliana.(1) We also showed that PUB9 localized to autophagic bodies following either activation by ARK2 or under phosphate starvation and ark2-1/pub9-1 plants displayed lateral root defects with inability to accumulate auxin in the root tips under phosphate starvation.(1) Supplementing exogenous auxin was sufficient to rescue the LR defects in ark2-1/pub9-1 mutant. Blocking of autophagic responses in wild-type Arabidopsis also resulted in inhibition of both lateral roots and auxin accumulation in the root tips indicating the importance of autophagy in mediating auxin accumulation under phosphate starved conditions.(1) Here, we propose a model for ARK2/AtPUB9 module in regulation of lateral root development via selective autophagy.

In vitro regeneration and ploidy level analysis of Eulophia ochreata Lindl.

Various parameters including explant-type, medium compositions, use of phytohormones and additives were optimized for direct and indirect regeneration of E. ochreata, a medicinal orchid under threat. Protocorm-like-bodies (PLBs) proved to be the best explants for shoot initiation, proliferation and callus induction. Murashige and Skoog's (MS) medium containing 2.5 mg L(-1) 6-benzylaminopurine (BAP), 1.0 mg L(-1) kinetin (Kin) and additives (adenine sulfate, arginine, citric acid, 30 mg L(-1) each and 50 mg L(-1) ascorbic acid) was optimal for shoot multiplication (12.1 shoots and 7.1 PLBs per explant with synchronized growth), which also produced callus. Shoot number was further increased with three successive subcultures on same media and approximately 40 shoots per explant were achieved after 3 cycles of 30 days each. Additives and casein hydrolysate (CH) showed advantageous effects on indirect shoot regeneration via protocorm-derived callus. Optimum indirect regeneration was achieved on MS containing additives, 500 mg L(-1) CH, 2.5 mg L(-1) BAP and 1.0 mg L(-1) Kin with 30 PLBs and 6 shoots per callus mass (approximately 5 mm size). The shoots were rooted (70% frequency) on one by fourth-MS medium containing 2.0 mg L(-1) indole-3-butyric acid, 200 mg L(-1) activated charcoal and additives. The rooted plantlets were hardened and transferred to greenhouse with 63% survival rate. Flow-cytometry based DNA content analysis revealed that the ploidy levels were maintained in in vitro regenerated plants. This is the first report for in vitro plant regeneration in E. ochreata.