In situ sono-rheometric assessment of procaine-loaded calcium pectinate hydrogel for enhanced drug releasing under ultrasound stimulation.

Ultrasound (US) triggered alterations in the viscoelastic behavior of the procaine-loaded ionically gelatinized pectin hydrogel matrix, and drug release was observed using a sono-device rheometer. The gel softened immediately upon activation of the ultrasound operated at 43 kHz and remained in a softened state throughout the irradiation. Upon cessation of ultrasound, the gel promptly reverted to its original hardness. This cycle of softening was consistently observed in ionically crosslinked pectin hydrogels, resulting in the promotion of procaine release, particularly with higher US power and lower calcium concentration. As the amount of loaded procaine increased, the gel weakened due to ion exchange with the calcium crosslinker and procaine. The most substantial release efficiency, reaching 82 % with a concentration of 32 µg/ml, was achieved when the hydrogels contained 0.03 % procaine within the gelatinized hydrogel medicine at a calcium concentration of 0.9 M, representing a six-fold increase compared to that without US. Notably, US exposure affected the 3D porous structure and degradation rate, leading to hydrogel collapse and facilitating medicine release. Additionally, the procaine-loaded pectin hydrogels with 0.9 M calcium exhibited improved fibroblast cell viability, indicating non-toxicity compared to those hydrogels prepared at a higher Ca2+ concentration of 2.4 M.

Pectin Nanoporous Structures Prepared via Salt-Induced Phase Separation and Ambient Azeotropic Evaporation Processes.

Polysaccharide nanoporous structures are suitable for various applications, ranging from biomedical scaffolds to adsorption materials, owing to their biocompatibility and large surface areas. Pectin, in particular, can create 3D nanoporous structures in aqueous solutions by binding with calcium cations and creating nanopores by phase separation; this process involves forming hydrogen bonds between alcohols and pectin chains in water and alcohol mixtures and the resulting penetration of alcohols into calcium-bound pectin gels. However, owing to the dehydration and condensation of polysaccharide chains during drying, it has proven to be challenging to maintain the 3D nanoporous structure without using a freeze-drying process or supercritical fluid. Herein, we report a facile method for creating polysaccharide-based xerogels, involving the co-evaporation of water with a nonsolvent (e.g., a low-molecular-weight hydrophobic alcohol such as isopropyl or n-propyl alcohol) at ambient conditions. Experiments and coarse-grained molecular dynamics simulations confirmed that salt-induced phase separation and hydrogen bonding between hydrophobic alcohols and pectin chains were the dominant processes in mixtures of pectin, water, and hydrophobic alcohols. Furthermore, the azeotropic evaporation of water and alcohol mixed in approximately 1:1 molar ratios was maintained during the natural drying process under ambient conditions, preventing the hydration and aggregation of the hydrophilic pectin chains. These results introduce a simple and convenient process to produce 3D polysaccharide xerogels under ambient conditions.

Effects of switching redox conditions on sediment phosphorus immobilization by calcium/aluminum composite capping: Performance, ecological safety and mechanisms.

There many materials were used in lake restoration to immobilize phosphorus (P) and reduce the effect of eutrophication. Among them, calcium/aluminum composite (CAC) showed a good capacity of P adsorption. However, a comprehensive of its performance, ecological safety, and the mechanism of P passivation in the aluminum-bound P (Al -P) dominated sediments under varying redox conditions remains incomplete. In the current study, both unwashed CAC (UCAC) and washed CAC (WCAC) showed good P adsorption properties, and the greatest maximum capacity for P adsorption (Qmax) reached 206.8 mg/g at pH 8.5 for UCAC. The SRP and TP in the overlying water of the uncapped sediments showed a decrease-increase-decrease trend in a sequence of transition from aerobic to anaerobic to re-aerobic stages. In contrast, the SRP and TP of the two CACs-capped sediments were maintained low. Phosphorus forms in the uncapped sediment also underwent significant changes during continuous variation of dissolved oxygen (DO) levels. In particular, the decrease in iron-bound P (Fe-P) and Al-P was significantly promoted in the anaerobic phase, and the released P was reabsorbed to form mainly Fe-P in the re-aerobic phase. The CACs-capping promoted the transformation of Fe-P to residual P (Res-P), forming a thick static layer in the surface sediment, thus significantly inhibiting sediment P release. Moreover, the CACs-capping did not induce the Al3+ leaching and significant changes of the microbial community in sediments, and their performances of P immobilization could keep stable to resist the redox variation, which promised to be a good choice for P passivation in eutrophic lake sediments dominated by Al/Fe-P. These findings also confirmed that the risk of P release from Al/Fe-P (mainly Al-P)-dominated sediments was strongly influenced by continuously changing redox conditions, and was probably enhanced by the formation of Fe-P from the resorption of the released P.

Effect of Chitosan on Rheological, Mechanical, and Adhesive Properties of Pectin-Calcium Gel.

In the present study, chitosan was included in the pectin ionotropic gel to improve its mechanical and bioadhesive properties. Pectin-chitosan gels P-Ch0, P-Ch1, P-Ch2, and P-Ch3 of chitosan weight fractions of 0.00, 0.25, 0.50, and 0.75 were prepared and characterized by dynamic rheological tests, penetration tests, and serosal adhesion ex vivo assays. The storage modulus (G') and loss modulus (G″) values, gel hardness, and elasticity of P-Ch1 were significantly higher than those of P-Ch0 gel. However, a further increase in the content of chitosan in the gel significantly reduced these parameters. The inclusion of chitosan into the pectin gel led to a decrease in weight and an increase in hardness during incubation in Hanks' solution at pH 5.0, 7.4, and 8.0. The adhesion of P-Ch1 and P-Ch2 to rat intestinal serosa ex vivo was 1.3 and 1.7 times stronger, whereas that of P-Ch3 was similar to that of a P-Ch0 gel. Pre-incubation in Hanks' solution at pH 5.0 and 7.4 reduced the adhesivity of gels; however, the adhesivity of P-Ch1 and P-Ch2 exceeded that of P-Ch0 and P-Ch3. Thus, serosal adhesion combined with higher mechanical stability in a wide pH range appeared to be advantages of the inclusion of chitosan into pectin gel.

A novel calcium peroxide/attapulgite-Fe(II) process for high concentration phosphate removal and recovery: Efficiency and mechanism.

Phosphorus (P) has been overused in livestock farming, which inevitably results in high-concentration P-containing wastewater. Managing total phosphorus discharge is important to prevent eutrophication in aquatic environments, thus it is critical to develop new technologies for the removal and recovery of high-concentration phosphate. In this study, a novel calcium peroxide/attapulgite (CP/ATP) composite was developed and coupled with Fe(II) for high-concentration phosphate removal and recovery. The results demonstrated that the optimal dosage of the CP/ATP-Fe(II) process was CP/ATP = 0.25 g/L and Fe(II) = 2 mM. The pH effect on phosphate removal was minimal, while phosphate removal efficiency rose by 16.7% with the temperature increased from 10 °C to 25 °C. The co-existing ions exhibited little effect on phosphate removal, and the CP/ATP-Fe(II) process showed effective phosphate removal from the real piggery wastewater. The P content of the precipitates after phosphate removal by this process was as high as 25.82%, indicating its good potential for P recycling. A significant synergistic effect existed in CP/ATP and Fe(II) for phosphate removal, and the SEM-EDS, XRD, Raman and XPS characterization exhibited that the phosphate removal mainly relied on the in-situ-formed Fe(III) and the participation of calcium (Ca) species. Co-precipitation was the predominant mechanism for phosphate removal, and the proportions of Fe(III)-P, Ca-P and Ca-Fe(III)-P in the precipitates were 51.5%, 31.2% and 17.3%, respectively. This study provides a highly efficient process for phosphate removal and recovery from wastewater, and insights into interactions among phosphorus, iron and calcium.

A novel calcium-binding peptide from bovine bone collagen hydrolysate and chelation mechanism and calcium absorption activity of peptide-calcium chelate.

A novel calcium-binding peptide from bovine bone collagen hydrolysate was screened based on a new target-the calcium-sensing receptor (CaSR), and its chelation mechanism and calcium absorption activity were investigated. Glu-Tyr-Gly exhibited superior binding affinities to CaSR because of its interaction with the active sites of the CaSR Venus Flytrap (VFT) domain. Glu-Tyr-Gly-Ca may exist in five potential chelation modes and its potential chelation mechanism was that calcium ions were located in the center and surrounded by ionic bonds (carboxyl group) and coordination bonds (carbonyl, amino, and carboxyl group). Glu-Tyr-Gly-Ca was slightly damaged in the intestinal fluid and at different temperatures, whereas it was severely damaged in the gastric fluid and acidic conditions. The results of the calcium dialysis percentage and Caco-2 cells experiments showed that Glu-Tyr-Gly-Ca possessed good calcium transport activity and bioavailability. The findings provided theoretical basis for Glu-Tyr-Gly-Ca as potential calcium supplement to improve intestinal calcium absorption.

Binding mechanism and bioavailability of a novel phosvitin phosphopeptide (Glu-Asp-Asp-pSer-pSer) calcium complex.

Phosvitin has excellent calcium binding capacity, related to its phosphopeptides. The phosphopeptides may be used as functional ingredients for improving calcium bioavailability, but the calcium-binding mechanism is unclear. In this study, a novel phosvitin phosphorylated pentapeptide (Glu-Asp-Asp-pSer-pSer, EDDpSpS) was selected to prepare an EDDpSpS calcium complex (EDDpSpS-Ca), and the calcium-binding mechanism and bioavailability investigated. The calcium-binding capacity of EDDpSpS was up to 468 ± 152.80 mg/g. Calcium ions prompted the folding of the EDDpSpS structure to form spherical nanoparticles. The calcium binding sites of EDDpSpS involved peptide bonds, carboxyl, amino, and phosphate groups. Molecular forces involved in these interactions were electrostatic in nature. Moreover, EDDpSpS-Ca had excellent bioavailability when compared to CaCO3, calcium lactate, and d-calcium gluconate. This study revealed the calcium-binding mechanism of phosvitin phosphopeptide, and suggested that EDDpSpS-Ca has the potential to be a novel, efficient, and promising calcium supplement.

Glycosylated peptide-calcium chelate: Characterization, calcium absorption promotion and prebiotic effect.

Finding functional preparations that could improve the bioavailability of calcium is one of the keys to solving calcium deficiency. In this study, glycosylated peptides-calcium chelate with calcium absorption promoting activity, named XOS-CSPHs-Ca-MR, was prepared from Crimson Sapper scales protein hydrolysates (CSPHs) and xylooligosaccharides (XOS) via Maillard reaction. Results showed that amino nitrogen, carboxyl oxygen, and carbonyl oxygen atom were the primary calcium chelating sites. Remarkably, XOS-CSPHs-Ca-MR exhibited good calcium phosphate crystallization inhibitory activity, gastrointestinal stability, and could promote calcium transport efficiency in the Caco-2 cell monolayer. In vitro fermentation results showed that XOS-CSPHs-Ca-MR improved the gut microbiota structure of calcium-deficient mice. Its prebiotic effect was achieved by increasing the number of beneficial bacteria, boosting the production of short-chain fatty acids, and improving the colonization ability of microbiota. Therefore, this study could lay a foundation for the study of glycosylated peptide-calcium chelate as a novel calcium supplement with prebiotic effect.

Casein phosphopeptide-calcium chelate: Preparation, calcium holding capacity and simulated digestion in vitro.

In this work, CPP-Ca chelate was synthesized by chelating casein phosphopeptide (CPP) and calcium and characterized by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) Energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The antioxidant activity and calcium holding capacity of CPP-Ca were evaluated and its secondary structure transition was monitored during gastrointestinal digestion by in situ Raman spectroscopy. The results demonstrated that calcium chelating rate reached 40 % and calcium ion was bound to CPP mainly through the interaction of carboxyl and amino groups. The result of calcium holding capacity confirmed the formation of calcium phosphate precipitates could be delayed by 10-15 min with increasing CPP concentration. In vitro simulated digestion revealed CPP-Ca exhibited excellent calcium solubility and its secondary structural changes occurred, especially α-helix and ß-sheet content. These findings provided significant insights into enhancing bioavailability of calcium supplements and developing of calcium functional foods for human and animals.

MgADP Promotes Myosin Head Movement toward Actin at Low [Ca2+] to Increase Force Production and Ca2+-Sensitivity of Contraction in Permeabilized Porcine Myocardial Strips.

Myosin cross-bridges dissociate from actin following Mg2+-adenosine triphosphate (MgATP) binding. Myosin hydrolyses MgATP into inorganic phosphate (Pi) and Mg2+-adenosine diphosphate (ADP), and release of these hydrolysis products drives chemo-mechanical energy transitions within the cross-bridge cycle to power muscle contraction. Some forms of heart disease are associated with metabolic or enzymatic dysregulation of the MgATP-MgADP nucleotide pool, resulting in elevated cytosolic [MgADP] and impaired muscle relaxation. We investigated the mechanical and structural effects of increasing [MgADP] in permeabilized myocardial strips from porcine left ventricle samples. Sarcomere length was set to 2.0 µm at 28 °C, and all solutions contained 3% dextran T-500 to compress myofilament lattice spacing to near-physiological values. Under relaxing low [Ca2+] conditions (pCa 8.0, where pCa = -log10[Ca2+]), tension increased as [MgADP] increased from 0-5 mM. Complementary small-angle X-ray diffraction measurements show that the equatorial intensity ratio, I1,1/I1,0, also increased as [MgADP] increased from 0 to 5 mM, indicating myosin head movement away from the thick-filament backbone towards the thin-filament. Ca2+-activated force-pCa measurements show that Ca2+-sensitivity of contraction increased with 5 mM MgADP, compared to 0 mM MgADP. These data show that MgADP augments tension at low [Ca2+] and Ca2+-sensitivity of contraction, suggesting that MgADP destabilizes the quasi-helically ordered myosin OFF state, thereby shifting the cross-bridge population towards the disordered myosin ON state. Together, these results indicate that MgADP enhances the probability of cross-bridge binding to actin due to enhancement of both thick and thin filament-based activation mechanisms.

Molecular-level insights into the mitigation of magnesium-natural organic matter induced ultrafiltration membrane fouling by high-dose calcium based on DFT calculation.

While magnesium cation (Mg2+) universally coexists with natural organic matter (NOM) in the water environment, influence of Mg2+ on NOM fouling in membrane filtration process is still unclear. This work was therefore performed to investigate effects of Mg2+ on NOM (sodium alginate (SA) as a model substance) fouling and role of Ca2+ in mitigating fouling from Mg2+ in the ultrafiltration (UF) water treatment process. Filtration tests showed two interesting fouling phenomena: (1) membrane fouling caused by combination of Mg2+ and SA maintained at a high value with the increased Mg2+ concentration; (2) the high fouling property of Mg2+ can be significantly improved by the prominent addition of calcium cation (Ca2+). It was found that changes of foulant morphology played essential roles through thermodynamic mechanisms represented by the Flory-Huggins lattice theory. Density functional theory (DFT) calculation showed that the combination of SA and Mg2+ tends to coordinate two terminal carboxyl groups in SA, beneficial to stretching alginate chains and forming a stable gel network at low doses. In addition, intramolecular coordination is difficult to occur between SA and Mg2+ due to the high hydration repulsion radius of Mg2+. Therefore, a dense and thick gel network remained even under high Mg2+concentration. Furthermore, due to the higher binding affinity of Ca2+ over Mg2+, high doses of Ca2+ trigger a transition of the stable SA-Mg2+ gel network to other configurations where flocculation and aggregation occur, thereby reducing the specific filtration resistance. The proposed thermodynamic mechanism satisfactorily explained the above interesting fouling behaviors, facilitating to development of new solutions to control membrane fouling.

Pectin self-assembly and its disruption by water: insights into plant cell wall mechanics.

Plant cell walls undergo multiple cycles of dehydration and rehydration during their life. Calcium crosslinked low methoxy pectin is a major constituent of plant cell walls. Understanding the dehydration-rehydration behavior of pectin gels may shed light on the water transport and mechanics of plant cells. In this work, we report the contributions of the microstructure to the mechanics of pectin-Ca gels subjected to different extents of dehydration and subsequent rehydration. This is investigated using a pectin gel composition that forms 'egg-box bundles', a characteristic feature of the microstructure of low methoxy pectin-Ca gels. Large amplitude oscillatory shear (LAOS) rheology along with small angle neutron scattering and near infrared (NIR) spectroscopy on pectin gels is used to elucidate the mechanical and microstructural changes during dehydration-rehydration cycles. As the extent of dehydration increases, the reswelling ability, strain-stiffening behavior and yield strain decrease. These effects are more prominent at faster rates of dehydration and are not completely reversible upon rehydration to the initial undried state. Microstructural changes due to the aggregation of egg-box bundles and single chains and the associated changes in the water configurations lead to these irreversible changes.

Curcumin loading and colon release of pectin gel beads: Effect of different de-esterification method.

Low methoxyl citrus pectin (LMP) de-esterified from high hydrostatic pressure assisted enzymatic (HHP-pectin) and two other traditional methods was characterized, and curcumin-pectin calcium gel beads were prepared to study curcumin-loading and colon-targeted delivery abilities. It was found there was no significant difference among different LMP on amorphous structure, while significantly higher Rha/GalA ratio of HHP-pectin indicated higher rhamnogalacturonan Ⅰ (RG-I) proportion and branching extent. Curcumin was well embedded in LMP beads with improved stability. HHP-pectin beads showed significantly higher hardness, chewiness and encapsulation efficiency, while lower swelling ratio. Moreover, in vitro simulated digestion showed gel beads can deliver curcumin to colon and inhibit premature release. HHP-pectin beads could release curcumin more quickly in colon, probably because of differences on texture properties, which may be depended on molecular structure. Thus, LMP especially HHP-pectin calcium gel as colon-targeted delivery system for curcumin may have potential application in function food and drug delivery.

Comparison of Dentin Caries Remineralization with Four Bioactive Cements.

The treatment of deep carious lesions involves the use of ion-releasing agents to seal the lesions. These agents release minerals, leading to the remineralization of the remaining demineralized dentin. This study aimed to compare the dentin caries remineralization with bioactive cements. 60 Dentin blocks were prepared from the dentin of human third molars. Artificial carious lesions were induced on the blocks with pH cycling. The samples were divided into five groups (n=12). Dycal, Oxford ActiveCal PC, Biodentine, and ACTIVA BioACTIVE were applied using a mold. One group did not receive any cement. The samples were stored in remineralization solution for 30 days. The cement was removed using a #15 blade, and the dentin surface was evaluated using Energydispersive X-ray Spectroscopy and X-ray Diffraction. One-way ANOVA did not show a significant difference in the weight percentages of calcium and phosphorus and the calcium-to-phosphorus ratios between the groups. The highest and the lowest weight percentages of calcium and phosphorus were observed in Biodentine and control groups, respectively. There were no significant differences in the remineralization properties of bioactive cements. Hydroxyapatite crystals were not formed in any of the adjacent dentin using these cements.

The yin and yang of intracellular delivery of amphipathic optical probes using n-butyl charge masking.

Monitoring and manipulation of ionized intracellular calcium concentrations within intact, living cells using optical probes with organic chromophores is a core method for cell physiology. Since all these probes have multiple negative charges, they must be smuggled through the plasma membrane in a transiently neutral form, with intracellular esterases used to deprotect the masked anions. Here we explore the ability of the synthetically easily accessible n-butyl ester protecting group to deliver amphipathic cargoes to the cytosol. We show that the size of the caging chromophore conditions the ability of intracellular probe delivery and esterase charge unmasking.

Optimization of calcium pectinate gel production from high methoxyl pectin.

BACKGROUND: Calcium pectinate (CaP) gel is traditionally prepared by de-esterifying high methoxyl pectin (HMP) to low methoxyl pectin (LMP), followed by gelation with calcium. To save both time and cost in the production of CaP gel, an alternative method was developed by the addition of CaCl2 to HMP at alkaline pH. To optimize the production, response surface methodology (RSM) was used to investigate the effects of temperature (30-50 °C), time (20-40 min) and pH (8-10) on yield, calcium content of the CaP gel and the degree of esterification (DE) of pectin following decalcification of CaP (DC-pectin). RESULTS: The linear term for pH had a significant effect (P < 0.01) on all three responses, whereas interaction effects were not significant (P > 0.01), except on the calcium content (P < 0.01). The optimized process conditions (temperature, time and pH) to obtain maximum CaP-HMP gel yield (88.83%) were 50 °C, 40 min and pH 9.6, and for the highest calcium content (97.23 mg g-1 ) they were 40 °C, 30 min and pH 9.7. DC-pectin was a typical LMP with DE varying from 26.92% to 50.33%. The DE of DC-pectin could be predicted by a model that proved significant (R2  = 0.9888). CONCLUSION: The optimum conditions were established to produce CaP gels from HMP with high yield and calcium content. Also, LMP with predictable DE can be produced following a significant model. This study provides new insights into the production and application of CaP gel. © 2021 Society of Chemical Industry.

On the Molecular Mechanism of the Calcium-Induced Gelation of Pectate. Different Steps in the Binding of Calcium Ions by Pectate.

Pectic acid/sodium pectate is one of the most widespread hydrocolloid used in the food industry. It is able to form strong ionotropic gels by the addition of ions, in particular, calcium ions. The initial steps of binding Ca2+ ions to a sample of sodium pectate with a composition close to 90% of ideal Na+-poly(galacturonate) were investigated by means of circular dichroism (CD), microcalorimetry, dilatometry, viscosity, and membrane osmometry, as a function of increasing Rj, Rj being the ratio of the molar concentrations of Ca2+ and pectate repeating units. Data were collected in aqueous NaClO4 at 25 °C. The key instrument of interpretation has been the counterion condensation theory (CCT) of linear polyelectrolytes, modified to include the presence of both specific affinity of the divalent counterion for the polysaccharide ("territorial binding"), and, very importantly, strong chemical bonding (not a covalent bonding, though) of Ca2+ on conformationally well-defined sites on the polymer, with local charge annihilation. Intrinsic viscosity and number-average molar mass data as a function of Rj showed that calcium bonding brings about chain association right from the beginning of addition to pectate. The analysis of the microcalorimetric curve using the modified CCT revealed two types of bonding. In the order of development as a function of Rj, the first mode (type 1) could be reconciled with the "tilted egg-box" type, recently proposed for Ca2+ binding to alginate and the second mode (type 2) with the "shifted egg-box" proposed for calcium pectate on the basis of conformational analysis investigation. Likewise, the two types of bonding turned out to be superimposable with similar bonding categories proposed for alginate and low-methoxyl pectin (LMP), on the one side, and for the association of semiflexible polyelectrolytes, on the other. The analysis allowed us to obtain standard Gibbs free energy, enthalpy, entropy, and volume molar values both for the affinity and the chemical bonding processes. Interestingly, the analysis of the dependence of the gelation temperatures, Tg, of LMP upon increasing additions of calcium ions provided the values of Tg and standard Gibbs free-energy of calcium-to-pectate association coinciding with those obtained from calorimetry for the type-2 bonding process. This finding corroborated previously reported evidence on the enthalpic nature of the elasticity of Ca2+-pectate gels. Finally, comparative analysis of different techniques, but of CD in particular, enabled proposing a "loose-21-helix" as the starting conformation of sodium pectate in aqueous solution.

Molecular architecture of black widow spider neurotoxins.

Latrotoxins (LaTXs) are presynaptic pore-forming neurotoxins found in the venom of Latrodectus spiders. The venom contains a toxic cocktail of seven LaTXs, with one of them targeting vertebrates (α-latrotoxin (α-LTX)), five specialized on insects (α, ß, γ, δ, ε- latroinsectotoxins (LITs), and one on crustaceans (α-latrocrustatoxin (α-LCT)). LaTXs bind to specific receptors on the surface of neuronal cells, inducing the release of neurotransmitters either by directly stimulating exocytosis or by forming Ca2+-conductive tetrameric pores in the membrane. Despite extensive studies in the past decades, a high-resolution structure of a LaTX is not yet available and the precise mechanism of LaTX action remains unclear. Here, we report cryoEM structures of the α-LCT monomer and the δ-LIT dimer. The structures reveal that LaTXs are organized in four domains. A C-terminal domain of ankyrin-like repeats shields a central membrane insertion domain of six parallel α-helices. Both domains are flexibly linked via an N-terminal α-helical domain and a small ß-sheet domain. A comparison between the structures suggests that oligomerization involves major conformational changes in LaTXs with longer C-terminal domains. Based on our data we propose a cyclic mechanism of oligomerization, taking place prior membrane insertion. Both recombinant α-LCT and δ-LIT form channels in artificial membrane bilayers, that are stabilized by Ca2+ ions and allow calcium flux at negative membrane potentials. Our comparative analysis between α-LCT and δ-LIT provides first crucial insights towards understanding the molecular mechanism of the LaTX family.

Effects of Variation in Al Content on the Emission of Eu Doped CaAlSiN3 Red Phosphor Synthesized by Combustion Synthesis Method for White LEDs.

Effects of Al content on the formation and the photoluminescence properties of CaAlSiN3:Eu2+ phosphor (CASIN) were investigated by a combustion synthesis method. XRD (X-ray diffraction), combined with PL (photoluminescence), TEM-EDS (transmission electron microscope equipped with an energy-dispersive X-ray spectroscope), and SAED (selected area electron diffraction) measurements, show that the bar-like CASIN gives a stronger emission than the plate-like and agglomerated fine particles. The emission intensity increases as the Al content increased from Al = 0.2 to Al = 0.8, which resulted from the extent of formation of CASIN increases. Then, the emission intensity decreases as the Al content is increased from Al = 0.8 to Al = 1.5, which resulted from the transformation of morphology of CASIN and a large amount formation of AlN. In addition, the extent of formation of CASIN increases with increasing Al from Al = 0.2 to Al = 1.2 and begins to decrease as Al is further increased to 1.5, and thus the peak emission wavelength increases from 647 nm to 658 nm as the Al molar ratio is increased from 0.2 to 1.2 and begins to decrease when further increasing the Al molar ratio to 1.5, which resulted from the large amount of AlN formed.

Performance and Dry Matter Accumulation of Groundnut in an Ultisol Amended with Phosphorus and Lime.

<b>Background and Objective:</b> Adequate yield improvement in groundnut may not be achieved in acid sand Ultisol through the application of mineral phosphorus alone, however, a combined application of lime and phosphorus fertilizer may be a better management option in such soils. Hence, this study evaluated the effects of four levels of lime (0, 2.0, 4.0 and 8.0 t ha¹) and four phosphorus (P) levels (0, 25, 50 and 75 kg ha¹) on the performance of groundnut (<i>Arachis hypogaea </i>L.) in the humid rainforest of South Eastern Nigeria. <b>Materials and Methods:</b> The study was a factorial experiment laid out in a Randomized Complete Block Design (RCBD) and consisted of sixteen treatment combinations replicated three times each. <b>Results:</b> The result obtained showed that the application of phosphorus fertilizer and lime had a significant (p<0.05) effect on plant height, number of leaves per plant, number of branches per plant, 75 kg ha¹ P and 8.0 t ha¹ lime resulted in the highest growth parameter. Similarly, 75 kg ha¹ P and 8.0 t ha¹ lime significantly improved the number of pods per plant 30.67, pod yield 3.58 t ha¹, biomass yield of 4.68 t ha¹, seed yield of 2.1 t ha¹ and 100 seed weight of 44.58 g, seed yield of groundnut while curtailing the number of unfilled pods 2.33. <b>Conclusion:</b> Application of phosphorus and lime at 75 kg ha¹ P and 8.0 t ha¹ lime is a beneficial agronomic practice that could enhance the productivity of groundnut in the Calabar rainforest zone of Cross River State.