Computational and SAXS-based structure insights of pectin acetyl esterase (CtPae12B) of family 12 carbohydrate esterase from Clostridium thermocellum ATCC 27405.

Pectin is a complex form of polysaccharide and is composed of several structural components that require the concerted action of several pectinases for its complete degradation. In this study, in silico and solution structure of a pectin acetyl esterase (CtPae12B) of family 12 carbohydrate esterase (CE12) from Clostridium thermocellum was determined. The CtPae12B modelled structure, showed a new α/ß hydrolase fold, similar to the fold found in the crystal structures of its nearest homologues from CE12 family, which differed from α/ß hydrolase fold found in glycoside hydrolases. In the active site of CtPae12B, two loops (loop1 and loop6) play an important role in the formation of a catalytic triad Ser15-Asp187-His190, where Ser15 acts as a nucleophile. The structural stability of CtPae12B and its catalytic site was detected by performing molecular dynamic (MD) simulation which showed stable and compact conformation of the structure. Molecular docking method was employed to analyse the conformations of various suitable ligands docked at the active site of CtPae12B. The stability and structural specificity of the catalytic residues with the ligand, 4-nitrophenyl acetate (4-NPA) was confirmed by MD simulation of CtPae12B-4NPA docked complex. Moreover, it was found that the nucleophile Ser15, forms hydrophobic interaction with 4-NPA in the active site to complete covalent catalysis. Small angle X-ray scattering analysis of CtPae12B at 3 mg/mL displayed elongated, compact and monodispersed nature in solution. The ab initio derived dummy model showed that CtPae12B exists as a homotrimer at 3 mg/mL which was also confirmed by dynamic light scattering.Communicated by Ramaswamy H. Sarma.

The multi-ligand binding first family 35 Carbohydrate Binding Module (CBM35) of Clostridium thermocellum targets rhamnogalacturonan I.

Carbohydrate Binding Modules (CBMs) targeting cellulose, xylan and mannan have been reported, however, a CBM targeting rhamnogalacturonan I (RG I) has never been identified. We had studied earlier a rhamnogalacturonan lyase (CtRGL) from Clostridium thermocellum that was associated with a family 35 CBM, Rgl-CBM35. In this study we show that Rgl-CBM35 displays binding with ß-d-glucuronic acid (ß-D-GlcpA), Δ4,5-anhydro-d-galactopyranosyluronic acid (Δ4,5-GalpA), rhamnogalacturonan I, arabinan, galactan, glucuronoxylans and arabinoxylans. Rgl-CBM35 contains a conserved ligand binding site in the loops known for binding ß-D-GlcpA and Δ4,5-GalpA moiety of unsaturated RG I and pectic-oligosaccharides. Mutagenesis revealed that Asn118 plays an important role in binding ß-D-GlcpA, Δ4,5-GalpA, sugarbeet arabinan and potato galactan at its conserved ligand binding site present in surface exposed loops. EDTA-treated Rgl-CBM35 showed no affinity towards ß-D-GlcpA and Δ4,5-GalpA underscoring Ca2+ mediated ligand recognition. Contrastingly, the EDTA-treated Rgl-CBM35 and its mutant N118A displayed affinity for sugarbeet arabinan and potato galactan. The curtailed affinity of Y37A/N118A and R69A/N118A double mutants towards sugarbeet arabinan emphasized the presence of a second ligand binding site. Rgl-CBM35 is the first CBM reported to primarily target RG I and also is the first member of family 35 CBM possessing at least two ligand binding sites.

Magnetic Separation of Elastin-like Polypeptide Receptors for Enrichment of Cellular and Molecular Targets.

Protein-conjugated magnetic nanoparticles (mNPs) are promising tools for a variety of biomedical applications, from immunoassays and biosensors to theranostics and drug-delivery. In such applications, conjugation of affinity proteins (e.g., antibodies) to the nanoparticle surface many times compromises biological activity and specificity, leading to increased reagent consumption and decreased assay performance. To address this problem, we engineered a biomolecular magnetic separation system that eliminates the need to chemically modify nanoparticles with the capture biomolecules or synthetic polymers of any kind. The system consists of (i) thermoresponsive magnetic iron oxide nanoparticles displaying poly(N-isopropylacrylamide) (pNIPAm), and (ii) an elastin-like polypeptide (ELP) fused with the affinity protein Cohesin (Coh). Proper design of pNIPAm-mNPs and ELP-Coh allowed for efficient cross-aggregation of the two distinct nanoparticle types under collapsing stimuli, which enabled magnetic separation of ELP-Coh aggregates bound to target Dockerin (Doc) molecules. Selective resolubilization of the ELP-Coh/Doc complexes was achieved under intermediate conditions under which only the pNIPAm-mNPs remained aggregated. We show that ELP-Coh is capable of magnetically separating and purifying nanomolar quantities of Doc as well as eukaryotic whole cells displaying the complementary Doc domain from diluted human plasma. This modular system provides magnetic enrichment and purification of captured molecular targets and eliminates the requirement of biofunctionalization of magnetic nanoparticles to achieve bioseparations. Our streamlined and simplified approach is amenable for point-of-use applications and brings the advantages of ELP-fusion proteins to the realm of magnetic particle separation systems.

Fluorescence correlation spectroscopy study of the complexation of DNA hybrids, IgG antibody, and a chimeric protein of IgG-binding ZZ domains fused with a carbohydrate binding module.

Fluorescence correlation spectroscopy (FCS) was used to characterize the molecular interactions between the four components of a DNA recognition system. A fluorescent DNA probe was used to assess: (i) the hybridization with a complementary biotin-labeled target, (ii) the complexation of the resulting hybrid and an anti-biotin antibody, and (iii) the binding of the latter complex to a ZZ-CBM fusion protein that combines small synthetic IgG Fc-binding Z domains with a carbohydrate binding module (CBM). These binding interactions were monitored by exposing the fluorescent DNA probe to different amounts and combinations of the other molecules in solution. Through the analysis of FCS autocorrelation curves, an association constant (Ka) of 2.9 × 107 M-1 was estimated for DNA·DNA hybridization, and the presence of (non-) complementary target DNA in solution could be discriminated. The specific capture of biotinylated DNA hybrids by anti-biotin IgG was verified, with an apparent Ka of 2.5 × 106 M-1. The increment in the diffusion time measured when the DNA·DNA:antibody complexes were in contact with the ZZ-CBM fusion protein suggested that the binding occurs at a stoichiometric ratio of DNA/antibody complex to fusion larger than 1 : 1. The FCS-derived information obtained is useful to gain insight into molecular interactions involved in diagnostic assays.

Molecular determinants of substrate specificity revealed by the structure of Clostridium thermocellum arabinofuranosidase 43A from glycosyl hydrolase family 43 subfamily 16.

The recent division of the large glycoside hydrolase family 43 (GH43) into subfamilies offers a renewed opportunity to develop structure-function studies aimed at clarifying the molecular determinants of substrate specificity in carbohydrate-degrading enzymes. α-L-Arabinofuranosidases (EC 3.2.1.55) remove arabinose side chains from heteropolysaccharides such as xylan and arabinan. However, there is some evidence suggesting that arabinofuranosidases are substrate-specific, being unable to display a debranching activity on different polysaccharides. Here, the structure of Clostridium thermocellum arabinofuranosidase 43A (CtAbf43A), which has been shown to act in the removal of arabinose side chains from arabinoxylan but not from pectic arabinan, is reported. CtAbf43A belongs to GH43 subfamily 16, the members of which have a restricted capacity to attack xylans. The crystal structure of CtAbf43A comprises a five-bladed ß-propeller fold typical of GH43 enzymes. CtAbf43A displays a highly compact architecture compatible with its high thermostability. Analysis of CtAbf43A along with the other member of GH43 subfamily 16 with known structure, the Bacillus subtilis arabinofuranosidase BsAXH-m2,3, suggests that the specificity of subfamily 16 for arabinoxylan is conferred by a long surface substrate-binding cleft that is complementary to the xylan backbone. The lack of a curved-shaped carbohydrate-interacting platform precludes GH43 subfamily 16 enzymes from interacting with the nonlinear arabinan scaffold and therefore from deconstructing this polysaccharide.

A New Member of Family 11 Polysaccharide Lyase, Rhamnogalacturonan Lyase (CtRGLf) from Clostridium thermocellum.

A thermostable, alkaline rhamnogalacturonan lyase (RG lyase) CtRGLf, of family 11 polysaccharide lyase from Clostridium thermocellum was cloned, expressed, purified and biochemically characterised. Both, the full-length CtRGLf (80 kDa) protein and its truncated derivative CtRGL (63.9 kDa) were expressed as soluble proteins and displayed maximum activity against rhamnogalacturonan I (RG I). CtRGLf showed maximum activity at 70 °C, while CtRGL at 60 °C. Both enzymes showed maximum activity at pH 8.5. CtRGLf and CtRGL do not show higher activity on substrates with high ß-D-galactopyranose (D-Galp) substitution, this catalytic property deviates from that of some earlier characterised RG lyases which prefer substrates with high D-Galp substitution. The enzyme activity of CtRGLf and CtRGL was enhanced by 1.5 and 1.3 fold, respectively, in the presence of 3 mM of Ca(2+) ions. The TLC analysis of the degraded products of RG I, released by the action of CtRGLf and CtRGL revealed the production of RG oligosaccharides as major products confirming their endolytic activity.

Enhanced biohydrogen production from sugarcane bagasse by Clostridium thermocellum supplemented with CaCO3.

Clostridium thermocellum ATCC 27405 was used to degrade sugarcane bagasse (SCB) directly for hydrogen production, which was significantly enhanced by supplementing medium with CaCO3. The effect of CaCO3 concentration on the hydrogen production was investigated. The hydrogen production was significantly enhanced with the CaCO3 concentration increased from 10mM to 20mM. However, with the CaCO3 concentration further increased from 20mM to 100mM, the hydrogen production didn't increase further. Under the optimal CaCO3 concentration of 20mM, the hydrogen production reached 97.83±5.19mmol/L from 2% sodium hydroxide-pretreated SCB, a 116.72% increase over the control (45.14±1.03mmol/L), and the yield of hydrogen production reached 4.89mmol H2/g SCBadded. Additionally, CaCO3 promoted the biodegradation of SCB and the growth of C. thermocellum. The stimulatory effects of CaCO3 on biohydrogen production are mainly attributed to the buffering capacity of carbonate. The study provides a novel strategy to enhance biohydrogen production from lignocellulose.

Elimination of formate production in Clostridium thermocellum.

The ability of Clostridium thermocellum to rapidly degrade cellulose and ferment resulting hydrolysis products into ethanol makes it a promising platform organism for cellulosic biofuel production via consolidated bioprocessing. Currently, however, ethanol yield is far below theoretical maximum due to branched product pathways that divert carbon and electrons towards formate, H2, lactate, acetate, and secreted amino acids. To redirect carbon and electron flux away from formate, genes encoding pyruvate:formate lyase (pflB) and PFL-activating enzyme (pflA) were deleted. Formate production in the resulting Δpfl strain was eliminated and acetate production decreased by 50 % on both complex and defined medium. The growth rate of the Δpfl strain decreased by 2.9-fold on defined medium and biphasic growth was observed on complex medium. Supplementation of defined medium with 2 mM formate restored Δpfl growth rate to 80 % of the parent strain. The role of pfl in metabolic engineering strategies and C1 metabolism is discussed.

Role of pectinolytic enzymes identified in Clostridium thermocellum cellulosome.

The cloning, expression and characterization of three cellulosomal pectinolytic enzymes viz., two variants of PL1 (PL1A and PL1B) and PL9 from Clostridium thermocellum was carried out. The comparison of the primary sequences of PL1A, PL1B and PL9 revealed that these proteins displayed considerable sequence similarities with family 1 and 9 polysaccharide lyases, respectively. PL1A, PL1B and PL9 are the putative catalytic domains of protein sequence ABN54148.1 and ABN53381.1 respectively. These two protein sequences also contain putative carbohydrate binding module (CBM) and type-I dockerin. The associated putative CBM of PL1A showed strong homology with family 6 CBMs while those of PL1B and PL9 showed homology with family 35 CBMs. Recombinant derivatives of these three enzymes showed molecular masses of approximately 34 kDa, 40 kDa and 32 kDa for PL1A, PL1B and PL9, respectively. PL1A, PL1B and PL9 displayed high activity toward polygalacturonic acid and pectin (up to 55% methyl-esterified) from citrus fruits. However, PL1B showed relatively higher activity towards 55% and 85% methyl-esterified pectin (citrus). PL1A and PL9 showed higher activity on rhamnogalacturonan than PL1B. Both PL1A and PL9 displayed maximum activity at pH 8.5 with optimum temperature of 50°C and 60°C respectively. PL1B achieved highest activity at pH 9.8, under an optimum temperature of 50°C. PL1A, PL1B and PL9 all produced two or more unsaturated galacturonates from pectic substrates as displayed by TLC analysis confirming that they are endo-pectate lyase belonging to family 1 and 9, respectively. This report reveals that pectinolytic activity displayed by Clostridium thermocellum cellulosome is coordinated by a sub-set of at least three multi-modular enzymes.

Transcriptomic analysis of Clostridium thermocellum Populus hydrolysate-tolerant mutant strain shows increased cellular efficiency in response to Populus hydrolysate compared to the wild type strain.

BACKGROUND: The thermophilic, anaerobic bacterium, Clostridium thermocellum is a model organism for consolidated processing due to its efficient fermentation of cellulose. Constituents of dilute acid pretreatment hydrolysate are known to inhibit C. thermocellum and other microorganisms. To evaluate the biological impact of this type of hydrolysate, a transcriptomic analysis of growth in hydrolysate-containing medium was conducted on 17.5% v/v Populus hydrolysate-tolerant mutant (PM) and wild type (WT) strains of C. thermocellum. RESULTS: In two levels of Populus hydrolysate medium (0% and 10% v/v), the PM showed both gene specific increases and decreases of gene expression compared to the wild-type strain. The PM had increased expression of genes in energy production and conversion, and amino acid transport and metabolism in both standard and 10% v/v Populus hydrolysate media. In particular, expression of the histidine metabolism increased up to 100 fold. In contrast, the PM decreased gene expression in cell division and sporulation (standard medium only), cell defense mechanisms, cell envelope, cell motility, and cellulosome in both media. The PM downregulated inorganic ion transport and metabolism in standard medium but upregulated it in the hydrolysate media when compared to the WT. The WT differentially expressed 1072 genes in response to the hydrolysate medium which included increased transcription of cell defense mechanisms, cell motility, and cellulosome, and decreased expression in cell envelope, amino acid transport and metabolism, inorganic ion transport and metabolism, and lipid metabolism, while the PM only differentially expressed 92 genes. The PM tolerates up to 17.5% v/v Populus hydrolysate and growth in it elicited 489 genes with differential expression, which included increased expression in energy production and conversion, cellulosome production, and inorganic ion transport and metabolism and decreased expression in transcription and cell defense mechanisms. CONCLUSION: These results suggest the mechanisms of tolerance for the Populus hydrolysate-tolerant mutant strain of C. thermocellum are based on increased cellular efficiency caused apparently by downregulation of non-critical genes and increasing the expression of genes in energy production and conversion rather than tolerance to specific hydrolysate components. The wild type, conversely, responds to hydrolysate media by down-regulating growth genes and up-regulating stress response genes.

A useful method integrating production and immobilization of recombinant cellulase.

The development of cellulase-based bioprocess is afflicted by the processing efficiency of enzymes. To address this issue, a method based on artificial oil bodies (AOBs) was proposed to integrate production and immobilization of recombinant cellulase. First, the heterologous endoglucanase (celA), cellobiohydrolase (celK), and ß-glucosidase (gls) genes were individually fused with oleosin, a structural protein of plant seed oils. After expression in Escherichia coli, each fusion protein of insolubility was mixed together with plant oils. AOBs were assembled by subjecting the mixture to sonication. Consequently, active CelA, CelK, and Gls were resumed and co-immobilized on AOBs surface. Finally, the assembly condition (including the protein ratio) and the reaction condition were further optimized by response surface methodology. The resulting AOBs-bound cellulase remained stable for 4 cycles of cellulose-hydrolyzed reactions. Overall, the result shows a promise of this proposed approach for processing recombinant cellulase, which may provide a facile method to investigate optimum combination of cellulase components towards various cellulosic materials.

Nitrogen and sulfur requirements for Clostridium thermocellum and Caldicellulosiruptor bescii on cellulosic substrates in minimal nutrient media.

Growth media for cellulolytic Clostridium thermocellum ATCC 27405 and Caldicellulosiruptor bescii bacteria usually contain excess nutrients that would increase costs for consolidated bioprocessing for biofuel production and create a waste stream with nitrogen, sulfur and phosphate. C. thermocellum was grown on crystalline cellulose with varying concentrations of nitrogen and sulfur compounds, and growth rate and ethanol production response curves were determined. Both bacteria assimilated sulfate in the presence of ascorbate reductant, increasing the ratio of oxidized to reduced fermentation products. From these results, a low ionic strength, defined minimal nutrient medium with decreased nitrogen, sulfur, phosphate and vitamin supplements was developed for the fermentation of cellobiose, cellulose and acid-pretreated Populus. Carbon and electron balance calculations indicate the unidentified residual fermentation products must include highly reduced molecules. Both bacterial populations were maintained in co-cultures with substrates containing cellulose and xylan in defined medium with sulfate and basal vitamin supplements.

The pepper extracellular xyloglucan-specific endo-ß-1,4-glucanase inhibitor protein gene, CaXEGIP1, is required for plant cell death and defense responses.

Plants produce various proteinaceous inhibitors to protect themselves against microbial pathogen attack. A xyloglucan-specific endo-ß-1,4-glucanase inhibitor1 gene, CaXEGIP1, was isolated and functionally characterized in pepper (Capsicum annuum) plants. CaXEGIP1 was rapidly and strongly induced in pepper leaves infected with avirulent Xanthomonas campestris pv vesicatoria, and purified CaXEGIP1 protein significantly inhibited the hydrolytic activity of the glycoside hydrolase74 family xyloglucan-specific endo-ß-1,4-glucanase from Clostridium thermocellum. Soluble-modified green fluorescent protein-tagged CaXEGIP1 proteins were mainly localized to the apoplast of onion (Allium cepa) epidermal cells. Agrobacterium tumefaciens-mediated overexpression of CaXEGIP1 triggered pathogen-independent, spontaneous cell death in pepper and Nicotiana benthamiana leaves. CaXEGIP1 silencing in pepper conferred enhanced susceptibility to virulent and avirulent X. campestris pv vesicatoria, accompanied by a compromised hypersensitive response and lowered expression of defense-related genes. Overexpression of dexamethasone:CaXEGIP1 in Arabidopsis (Arabidopsis thaliana) enhanced resistance to Hyaloperonospora arabidopsidis infection. Comparative histochemical and proteomic analyses revealed that CaXEGIP1 overexpression induced a spontaneous cell death response and also increased the expression of some defense-related proteins in transgenic Arabidopsis leaves. This response was also accompanied by cell wall thickening and darkening. Together, these results suggest that pathogen-inducible CaXEGIP1 positively regulates cell death-mediated defense responses in plants.

The thermostable ß-1,3-1,4-glucanase from Clostridium thermocellum improves the nutritive value of highly viscous barley-based diets for broilers.

1. Microbial ß-1,3-1,4-glucanases improve the nutritive value of barley-based diets for poultry by effectively decreasing the degree of polymerisation of the anti-nutritive soluble ß-glucans. Glycoside hydrolases (GHs) acting on recalcitrant polysaccharides display a modular architecture comprising a catalytic domain linked to one or more non-catalytic Carbohydrate-Binding Modules (CBMs). 2. GHs and CBMs have been classified in different families based on primary structure similarity (see CAZy webpage at http://www.cazy.org ). The role of CBMs is to anchor the appended GHs into their target substrates, therefore eliciting the efficient hydrolysis of structural carbohydrates. 3. Here we describe the biochemical properties of the family 16 GH from Clostridium thermocellum, termed CtGlc16A. CtGlc16A is a thermostable enzyme that specifically acts on ß-1,3-1,4-glucans with a remarkable catalytic activity (38000 U/mg protein). 4. CtGlc16A, individually or fused to the family 11 ß-glucan-binding domain of cellulase CtLic26A-Cel5E of C. thermocellum, was used to supplement a highly viscous barley-based diet for broilers. 5. The data showed that birds fed on diets supplemented with the recombinant enzymes displayed an improved performance when compared with birds given diets not supplemented with exogenous enzymes. However, inclusion of the non-catalytic CBMs had no influence on the capacity of CtGlc16A to reduce the anti-nutritive effects of soluble ß-1,3-1,4-glucans. 6. The data suggest that at elevated dosage rates, CBMs might be unable to potentiate the catalytic activity of appended catalytic domains; this effect may only be revealed when feed enzymes are incorporated at low levels.

The unique set of putative membrane-associated anti-sigma factors in Clostridium thermocellum suggests a novel extracellular carbohydrate-sensing mechanism involved in gene regulation.

Genome analysis of the Gram-positive cellulolytic bacterium Clostridium thermocellum revealed the presence of multiple negative regulators of alternative sigma factors. Nine of the deduced proteins share a strong similarity in their N-terminal sequences to the Bacillus subtilis membrane-associated anti-sigma(I) factor RsgI and have an unusual domain organization. In six RsgI-like proteins, the C-terminal sequences contain predicted carbohydrate-binding modules. Three of these modules were overexpressed and shown to bind specifically to cellulose and/or pectin. Bioinformatic analysis of >1200 bacterial genomes revealed that the C. thermocellum RsgI-like proteins are unique to this species and are not present in other cellulolytic clostridial species (e.g. Clostridium cellulolyticum and Clostridium papyrosolvens). Eight of the nine genes encoding putative C. thermocellum RsgI-like anti-sigma factors form predicted bicistronic operons, in which the first gene encodes a putative alternative sigma factor, similar to B. subtilissigma(I), but lacking in one of its domains. These observations suggest a novel carbohydrate-sensing mechanism in C. thermocellum, whereby the presence of polysaccharide biomass components is detected extracellularly and the signal is transmitted intracellularly, resulting in the disruption of the interaction between RsgI-like proteins and sigma(I)-like factors, the latter of which serve to activate appropriate genes encoding proteins involved in cellulose utilization.

Ligand-based nuclear magnetic resonance screening techniques.

A critical step in the drug discovery process is the identification of high-affinity ligands for macromolecular targets, and, over the last 10 years, NMR spectroscopy has become a powerful tool in the pharmaceutical industry. Instrumental improvements in recent years have contributed significantly to this development. Digital recording, cryogenic probes, autosamplers, and higher magnetic fields shorten the time for data acquisition and improve the spectral quality. In addition, new experiments and pulse sequences make a vast amount of information available for the drug discovery process. All these techniques take advantage of the fact that upon complex formation between a target molecule and a ligand, significant perturbations can be observed in NMR-sensitive parameters of either the target or the ligand. These perturbations can be used qualitatively to detect ligand binding or quantitatively to assess the strength of the binding interaction. In addition, some of the techniques allow the identification of the ligand-binding site or which part of the ligand is responsible for interacting with the target.In this chapter, we will use examples from our own research to illustrate how NMR experiments to characterize ligand binding may be used to both screen for novel compounds during the process of lead generation, and provide structural information useful for lead optimization during the latter stages of a discovery program.

Engineering a reversible, high-affinity system for efficient protein purification based on the cohesin-dockerin interaction.

Efficient degradation of cellulose by the anaerobic thermophilic bacterium, Clostridium thermocellum, is carried out by the multi-enzyme cellulosome complex. The enzymes on the complex are attached in a calcium-dependent manner via their dockerin (Doc) module to a cohesin (Coh) module of the cellulosomal scaffoldin subunit. In this study, we have optimized the Coh-Doc interaction for the purpose of protein affinity purification. A C. thermocellum Coh module was thus fused to a carbohydrate-binding module, and the resultant fusion protein was applied directly onto beaded cellulose, thereby serving as a non-covalent "activation" procedure. A complementary Doc module was then fused to a model protein target: xylanase T-6 from Geobacillus stearothermophilus. However, the binding to the immobilized Coh was only partially reversible upon treatment with EDTA, and only negligible amounts of the target protein were eluted from the affinity column. In order to improve protein elution, a series of truncated Docs were designed in which the calcium-coordinating function was impaired without appreciably affecting high-affinity binding to Coh. A shortened Doc of only 48 residues was sufficient to function as an effective affinity tag, and highly purified target protein was achieved directly from crude cell extracts in a single step with near-quantitative recovery of the target protein. Effective EDTA-mediated elution of the sequestered protein from the column was the key step of the procedure. The affinity column was reusable and maintained very high levels of capacity upon repeated rounds of loading and elution. Reusable Coh-Doc affinity columns thus provide an efficient and attractive approach for purifying proteins in high yield by modifying the calcium-binding loop of the Doc module.

Influence of process conditions on end product formation from Clostridium thermocellum 27405 in solid substrate cultivation on paper pulp sludge.

Solid substrate cultivation of thermophilic, anaerobic bacteria offers an alternative production method for many bio-based chemicals; however the process must be optimized for each substrate-organism fermentation. The effects of initial substrate moisture content (SMC, 30%, 50% and 70% wet-basis), supplemental nutrient concentration (SNC, 12%, 50% and 100%) and duration of cultivation time (6, 10 and 14 days), on product formation (lactate, ethanol and acetate) by Clostridium thermocellum 27405 were examined during growth on paper pulp sludge. Water activities at moisture contents above 30% wet-basis were essentially identical ( approximately 0.99), yet the water contents differed significantly, and affected the metabolic activity of C. thermocellum. Increases in initial substrate moisture content from 50% to 70% for cultures supplemented with 50% or 100% nutrients resulted in a 75-145 mM increase in total end products. At 70% SMC, the addition of 100% SNC generated a 56% increase in product formation above the addition of 50% nutrient supplementation. Increases in the quantity of free water present in the solid substrate cultivation system up to the water holding capacity of the paper pulp sludge led to improved performance of this anaerobic bacterium. While nutrient supplementation is common in the form of salts for many aerobic microorganisms, efficient metabolism for anaerobic C. thermocellum grown in SSC was highly dependent on added salts, vitamins and reducing agents. Further studies are needed to determine if this is a general effect for other anaerobes grown in solid substrate cultures.

Mechanism of bacterial cell-surface attachment revealed by the structure of cellulosomal type II cohesin-dockerin complex.

Bacterial cell-surface attachment of macromolecular complexes maintains the microorganism in close proximity to extracellular substrates and allows for optimal uptake of hydrolytic byproducts. The cellulosome is a large multienzyme complex used by many anaerobic bacteria for the efficient degradation of plant cell-wall polysaccharides. The mechanism of cellulosome retention to the bacterial cell surface involves a calcium-mediated protein-protein interaction between the dockerin (Doc) module from the cellulosomal scaffold and a cohesin (Coh) module of cell-surface proteins located within the proteoglycan layer. Here, we report the structure of an ultra-high-affinity (K(a) = 1.44 x 10(10) M(-1)) complex between type II Doc, together with its neighboring X module from the cellulosome scaffold of Clostridium thermocellum, and a type II Coh module associated with the bacterial cell surface. Identification of X module-Doc and X module-Coh contacts reveal roles for the X module in Doc stability and enhanced Coh recognition. This extremely tight interaction involves one face of the Coh and both helices of the Doc and comprises significant hydrophobic character and a complementary extensive hydrogen-bond network. This structure represents a unique mechanism for cell-surface attachment in anaerobic bacteria and provides a rationale for discriminating between type I and type II Coh modules.