Tecoma stans floral extract-mediated synthesis of MgFe2O4/ZnO nanoparticles for adsorption and photocatalytic degradation of coomassie brilliant blue dye.

Toxic organic dyes-containing wastewater treatment by adsorption and photocatalytic techniques is widely applied, but adsorbents and photocatalysts are often synthesized through chemical methods, leading to secondary pollution by released chemicals. Here, we report a benign method using Tecoma stans floral extract to produce MgFe2O4/ZnO (MGFOZ) nanoparticles for adsorption and photocatalytic degradation of coomassie brilliant blue (CBB) dye. Green MGFOZ owned a surface area of 9.65 m2/g and an average grain size of 54 nm. This bio-based nanomaterial showed higher removal percentage and better recyclability (up to five cycles) than green MgFe2O4 and ZnO nanoparticles. CBB adsorption by MGFOZ was examined by kinetic and isotherm models with better fittings of Bangham and Langmuir or Temkin. RSM-based optimization was conducted to reach an actual adsorption capacity of 147.68 mg/g. Moreover, MGFOZ/visible light system showed a degradation efficiency of 89% CBB dye after 120 min. CBB adsorption can be controlled by both physisorption and chemisorption while •O2- and •OH radicals are responsible for photo-degradation of CBB dye. This study suggested that MGFOZ can be a promising adsorbent and catalyst for removal of organic dyes in water.

Synthesizing pectin-crosslinked gum ghatti hydrogel for efficient adsorptive removal of malachite green.

Pectin-crosslinked gum ghatti hydrogel (PGH) has been synthesized utilizing pectin and gum ghatti through an uncomplicated and inexpensive copolymerization method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM-elemental mapping), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS) characterization techniques have been employed to determine various structural, chemical and compositional characteristics of fabricated PGH. Three different weight ratios (1:1, 2:1, or 1:2 for pectin and gum ghatti, respectively) were employed to synthesize three distinct types of PGH. Swelling studies has been done to determine the best ratios for PGH fabrication. PGH has been assessed as an adsorbent for the removal of malachite green dye from aqueous solutions. The effects of PGH dosage (100-400 mg/L), dye concentration (10-160 mg/L), pH (2-9 pH), adsorption time (0-480 min), and temperature (25-55 °C) has been examined through batch solutions. According to Langmuir isotherm analysis, the maximum adsorption capacity is 658.1 mg/g. By using pseudo-second-order kinetics and the Freundlich adsorption isotherm, the adsorption process could be well explained. After five consecutive cycles, PGH had an adsorption percentage of 86.917 % for the malachite green dye. It is safe for the environment and may be used to remove malachite green (MG) dye from aqueous solutions.

Green synthesis of MnO2 nanoparticles from Psidium guajava leaf extract: Morphological characterization, photocatalytic and DNA/BSA interaction studies.

In this work, a simple, efficient and eco-friendly green synthesis of manganese dioxide nanoparticles (MnO2NPs) by Psidium guajava leaf extract was described. Fourier-Transform infrared spectra results revealed that involvement of the plant extract functional groups in the formation of MnO2NPs. The UV-vis absorption spectra of the synthesized MnO2NPs exhibited absorption peaks at 374 nm, which were attributed to the band gap of the MnO2NPs. Crystal phase identification of the MnO2NPs were characterized by X-ray diffraction analysis and the formation of crystalline MnO2NPs have been confirmed. Furthermore, scanning electron microscopy analysis showed that the synthesized MnO2NPs have a spherical in shape. Interestingly, the prepared green synthesized MnO2NPs showed catalytic degradation activity for malachite green dye. Malachite green's photocatalytic degradation was detected spectrophotometrically in the wavelength range of 250-900 nm, and it was discovered to have a photodegradation efficiency of 75.5 % within 90 min when exposed to solar radiation. Green synthesized MnO2NPs are responsible for this higher activity. An interaction between synthesized NPs and biomolecules, including CT-DNA and BSA was also evaluated. The spectrophotometric and Fluoro spectroscopic analyses indicate a gradual reduction in peak intensities and shifts in wavelengths, indicating binding and affinity between the NPs and the biomolecules.

Preparation of sustainable mineral oil-free offset printing ink with vegetable oil esters.

Mineral oils are used in substantial quantities for the production of varnishes and inks due to their abundance and versatility. However, as part of the production process, some of mineral oil components are separated as waste material, whereupon they can mix with air, water, or soil and become potentially harmful to the environment. Almost all these waste materials are volatile organic compounds (VOCs), chemicals that can easily evaporate at room temperature and have toxic effect. Therefore, a novel green, mineral oil-free offset printing ink was produced using vegetable oil esters as bio-renewable raw materials. Accompanying varnishes were prepared with linseed oil, methyl oleate, octyl stearate, and four types of resin (A, B, C, and D). The application of these varnishes to magenta color offset ink was subsequently studied to screen out the best combination of resin and ester in terms of setting time. Meanwhile, dyeing force tests were conducted to evaluate the ink's printability, while rheological analysis was done via viscosity and flowability tests. The setting time of the magenta color offset ink made by varnish A was observed to be considerably shorter than that of the ink samples prepared using varnishes B, C, and D. Furthermore, varnish A proved to be a good alternative varnish for the production of yellow, cyan, and black color offset printing inks. Samples of these inks were printed on coated paper, and their printability was contrasted against that of vegetable oil-based (pure vegetable oil), mineral oil-based, and other mineral oil-free offset printing inks. Results determined that the varnishes produced with linseed oil, methyl oleate, and octyl stearate can replace mineral oil-based varnishes for the production of offset printing ink.

The adhesive strength of fiber post-to-canal dentin with Aniline green, Fotoenticine activated by PDT, green tea, and ozone as a final irrigant.

AIM: The effect of novel final disinfection protocols Malachite green (MG), Fotoenticine® (FTC), Green tea extract (GTE), and Ozonated water (OW) on the bond strength of prefabricated glass fiber posts (PGFP) adhered to canal dentin. MATERIAL AND METHOD: The canals of fifty premolars with closed apices were cleansed and obturated. The specimens were randomly assigned to one of five groups based on the final irrigant used, with the control group receiving NaOCl+EDTA and the experimental groups receiving MG, FTC, OW, and GTE. The GFP was cemented with a self-etching, dual-cure paste; the bond strength was estimated with a universal testing machine; and failure analysis was conducted with a stereomicroscope. RESULTS: The highest PBS was observed in the coronal third of Group 4 (using ozonated water as the final irrigant), whereas the lowest bond integrity was observed in the apical section of Group 2 (1.02-0.54 MPa) using Malachite green as the final irrigant. Group 1, Group 4, and Group 5 exhibited no significant difference in the bond integrity of GFP to dentin when compared to Group 2 (p>0.05). In addition, comparable bond score values were obtained for Groups 2 and 3 (p>0.05). CONCLUSION: The results of this study suggest that OW and GTE may be effective final disinfectants for root canals, as they increase the bond strength of resin-luting cement.

The value of pre-symptomatic genetic risk assessment for age-related macular degeneration: the Moran AMD Genetic Testing Assessment (MAGENTA) study-a study protocol for a randomized controlled trial.

BACKGROUND: Age-related macular degeneration (AMD) is an irreversible blinding eye condition with complex genetic and environmental etiologies. Genetic testing for AMD for previously identified multiple-risk single nucleotide polymorphisms can help determine an individual's future susceptibility. However, such testing has been discouraged until evidence shows that providing such information to symptomatic or pre-symptomatic individuals will alter their disease course. Therefore, we designed this study to investigate whether knowledge of AMD risk could stimulate the adoption of a healthier lifestyle that could lower the incidence of AMD later in life. We hypothesize that pre-symptomatic individuals informed of a high genetic risk of AMD are more likely to make quantifiable, positive lifestyle changes relative to participants informed of lower genetic risk or randomized to deferred disclosure of genetic testing results. METHODS: The Moran AMD Genetic Testing Assessment (MAGENTA) study is a phase 2, single-center, prospective, double-masked, randomized controlled trial conducted at the John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA. Participants are randomized by a 3:1 allocation ratio to immediate and deferred disclosure groups and followed for 12 months. Skin, ocular, and serum carotenoid status, as well as nutritional and social surveys, are assessed at study visits. Skin carotenoid assessment is by resonance Raman spectroscopy and reflectance spectroscopy, ocular carotenoids are measured with Heidelberg Spectralis autofluorescence imaging and fluorescence lifetime imaging ophthalmoscopy (FLIO), and serum carotenoids are quantified using high-performance liquid chromatography. The primary outcome evaluates changes in skin carotenoid status in response to genetic risk disclosure. The secondary outcomes examine changes in ocular and serum carotenoid status in response to genetic risk disclosure. Also, we will correlate AMD genetic risk with baseline ocular and systemic carotenoid status and FLIO. DISCUSSION: MAGENTA will provide much-needed evidence on whether pre-symptomatic testing for AMD risk can lead to quantifiable long-term changes in behavior and lifestyle associated with a lower incidence of AMD later in life. Findings from the MAGENTA trial will facilitate the design of a future larger, longer-term, multicenter phase 3 trial that could feature subgroup analysis, expanded measures of lifestyle modification, and potential active nutritional interventions. TRIAL REGISTRATION: ClinicalTrials.gov NCT05265624 . Registered on March 3, 2022.

Antioxidants from Hyeronima macrocarpa Berries Loaded on Nanocellulose: Thermal and Antioxidant Stability.

This study investigated the effect of different storage temperatures (35-55 °C) on the bioactive substances and antioxidant properties of Hyeronima macrocarpa berries loaded on nanocellulose. NC was extracted from banana pseudo-stems and presented an interesting surface and porosity properties. The acidified ethanol extract showed better anthocyanin extraction (1317 mg C3G eq./100 g FW) and was used for the preparation of the powdered product, which presented an intense and uniform magenta color, with CIELAB parameters of L* = 59.16, a* = 35.61, and b* = 7.08. The powder exhibited significant stability at storage temperatures of 35 and 45 °C, in which there was no significant loss of anthocyanins or a decrease in antioxidant capacity. In addition, the color was stable for up to 4 months without adding any preservative agent. The anthocyanin-rich extract of H. macrocarpa reached an estimated shelf-life of 315 days (stored at 35 °C), as a result of the impregnation process between the extract and NC, with the ability to protect the bioactives from degradation, due to NC surface properties.

A green approach for the preparation of ZnO@C nanocomposite using agave americana plant extract with enhanced photodegradation.

The present study demonstrates the crucial role of agave americana extract in enhancing the optical properties of zinc oxide (ZnO) through thermal treatment method. Various analytical and surface science techniques have been used to identify the morphology, crystalline structure, chemical composition, and optical properties, including scanning electron microscopy, x-ray diffraction, high resolution transmission electron microscopy (HRTEM), x-ray spectroscopy (EDS) and UV-visible spectroscopy techniques. The physical studies revealed the transformation of ZnO nanorods into nanosheets upon addition of an optimized amount of agave americana extract, which induced large amount of amorphous carbon deposited onto ZnO nanostructures as confirmed by HRTEM analysis. The use of increasing amount of americana extract has significantly reduced the average crystallite size of ZnO nanostructures. The resultant hybrid system of C@ZnO has produced a significant effect on the ultraviolet light-assisted photodegradation of malachite green (MG) dye. The photocatalyst dose was fixed at 10 mg for each study whereas the amount of agave americana extract and MG dye concentration are varied. The functionality of hybrid system was greatly enhanced when the amount of agave americana extract increased while dye concentration kept at lower level. Ultimately, almost 100% degradation efficiency was achieved via the prepared hybrid material, revealing combined contribution from synergy, stabilization of ZnO due to excess of carbon together with the high charge separation rate. The obtained results suggest that the driving role of agave americana extract for surface modification of photocatalyst can be considered for other nanostructured photocatalysts.

Green synthesis of copper oxide nanoparticles using Abutilon indicum leaves extract and their evaluation of antibacterial, anticancer in human A549 lung and MDA-MB-231 breast cancer cells.

In currently, biosynthesis of copper oxide nanoparticles (CuO NPs) are most widely used numerous in biological applications such as biosensor, energy, medicine, agriculture, environmental and industrial wastewater treatment. The hierarchical CuO NPs was synthesized via green chemistry method by using of Abutilon indicum (A. indicum) leaf extract, its nontoxic, facile and low-cost approaches. Biogenic synthesized CuO NPs was characterized by using a UV-visible absorption spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and Field mission scanning electron microscopy (FE-SEM) with Energy-dispersive X-ray spectroscopy (EDX) analysis. The synthesized CuO NPs was performed antibacterial activity against human pathogenic organisms of both Gram negative (Escherichia coli and Salmonella typhi) and Gram positive (Bacillus subtilis and Staphylococcus aureus) bacteria by using agar well diffusion method. Biological synthesized CuO NPs was showed potential bactericidal activity against Gram positive bacteria of B. subtilis than compared to Gram negative bacteria of E. coli. The cytotoxic effect of A. indicum mediated synthesized CuO NPs was evaluated against to human lung A549 and breast MDA-MB-231cancer cell lines by determined using of MTT assay. In furthermore, photocatalytic dye degradation was performed that synthesized CuO NPs have effectively removed 78% of malachite green dye molecule. Our investigation results suggested that the green synthesized CuO NPs potential biological activity of antibacterial activity against Gram positive bacterial, anticancer activity was effectively against MDA-MB-231cancer cell line and good dye degradation was exhibited in malachite green. The A. indicum aqueous leaf extract mediated synthesized CuO NPs has strongly suggested promising nano-biomaterials for fabrication of biomedical applications.

Green synthesis of Mn3O4 nanoparticles using Costus woodsonii flowers extract for effective removal of malachite green dye.

The pollution of organic dyes such as malachite green is one of the globally critical issues, calling for efficient mitigation methods. Herein, we developed green Mn3O4 nanoparticles synthesized using natural compounds extracted from Costus woodsonii flowers under an ultrasound-assisted mode. The materials were characterized using several physicochemical techniques such as Fourier-transform infrared spectroscopy, X-ray diffraction, Energy-dispersive X-ray spectroscopy, scanning electron microscopy, Raman spectroscopy, and N2 adsorption desorption isotherm measurement. The X-ray diffraction and N2 isotherm plots confirmed the presence of tetragonal γ-Mn3O4 phase and mesoporous structure, respectively. Carbonyl groups derived from flavonoids or carboxylic compounds were found in the surface of green Mn3O4 nanoparticles. The effect of pH, contact time, dose, and concentration on the adsorption of malachite green over green Mn3O4 was carried out. The maximum malachite green adsorption capacity for green Mn3O4 nanoparticles was 101-162 mg g-1. Moreover, kinetic and isotherm adsorption of malachite green obeyed Langmuir (Radj.2 = 0.980-0.995) and pseudo first-order models (Radj.2 = 0.996-1.00), respectively. Adsorption of malachite green over green Mn3O4 was a thermodynamically spontaneous process due to negative Gibbs free energy values (ΔGο < 0). Green Mn3O4 nanoparticles offered a high stability through the FR-IR spectra analysis. With a good recyclability of 4 cycles, green Mn3O4 nanoparticles can be used as potential adsorbent for removing malachite green dye from water.

Polyphenol characterisation and diverse bioactivities of native Australian lilly pilly (Syzygium paniculatum) extract.

Magenta lilly pilly (Syzygium paniculatum) is an Australian native tree that produces berry fruits that are rich in phytochemicals reportedly beneficial to human health. Here we explored the biological activities of polyphenol-enriched extracts from the magenta lilly pilly fruit, benchmarking it against traditional sources including purple sweet potato and blackberry. We show that the extracts exert potent antioxidant and neuroprotective properties as well as antimicrobial activity against Staphylococcus aureus. The phenolic composition of lilly pilly was investigated using liquid chromatography coupled to mass spectrometry (HPLC-DAD-MS), revealing anthocyanins to be the primary component in high abundance compared to traditional anthocyanin-containing plants. Three anthocyanins from lilly pilly, along with their glycosylation patterns and stability, were characterised. Altogether, our results demonstrate the potential to exploit magenta lilly pilly fruits as a high-yielding source of phenolics with beneficial biological properties of potential interest for multiple downstream applications.

Garlic peel based mesoporous carbon nanospheres for an effective removal of malachite green dye from aqueous solutions: Detailed isotherms and kinetics.

Biowaste based nanoadsorbents have gained much attention in the recent times for wastewater decolourization owing to their low cost, high surface area and high adsorption capacities. In the present research, garlic peel based nanoparticles (GCNP) were synthesized at different temperatures by a one step pyrolytic green approach for the effective removal of cationic dye, malachite green from the aqueous medium. The surface properties of Garlic nanoparticles were elucidated by N2 adsorption- desorption and all the GCNP samples were found to exhibit Type IV(a) isotherm indicating the presence of mesopores in carbon matrix. Using BET calculations, highest surface area (380 m2/g) was obtained for GCNP synthesized at 1000 ◦C. Characterization of nanoparticles was done by XRD, EDAX, SEM and FTIR studies before and after the dye treatment. Adsorption studies conducted using different parameters like contact time, concentration and pH and dosage of adsorbent showed removal efficiency above 90% for the contact time of 70 min. Best adsorption experimental results were obtained for GCNP synthesized at 1000 °C ascribable to its high surface area, higher total pore volume (0.26 cm2/g) and higher carbon content. Four adsorption isotherm models were used to validate batch equillibrium studies and the results showed data in good agreement with Langmuir and Freundlich isotherms with maximum Langmuir adsorbtion capactiy to be 373.7 mg/g. Kinetic modelling of the data showed best fit with the Pseudo second order model with rate constant value of 48.726 g mg-1 min-1. Regenerative studies were conducted conducted upto 6 cycles. Also the GC nanoparticles were tested for their compatibility in membrane form wherein, removal efficiency results were obtained for GCNP anchored in polyvinyl difluoride (PVDF) and polysulfone (PSF) membrane matrix for dye adsorption.

Ultrasensitive Optical Fingerprinting of Biorelevant Molecules by Means of SERS-Mapping on Nanostructured Metasurfaces.

The most relevant technique for portable (on-chip) sensors is Surface Enhanced Raman Scattering (SERS). This strategy crashes in the case of large (biorelevant) molecules and nano-objects, whose SERS spectra are irreproducible for "homeopathic" concentrations. We suggested solving this problem by SERS-mapping. We analyzed the distributions of SERS parameters for relatively "small" (malachite green (MG)) and "large" (phthalocyanine, H2Pc*) molecules. While fluctuations of spectra for "small" MG were negligible, noticeable distribution of spectra was observed for "large" H2Pc*. We show that the latter is due to a random arrangement of molecules with respect to "hot spot" areas, which have limited sizes, thus amplifying the lines corresponding to vibrations of different molecule parts. We have developed a method for engineering low-cost SERS substrates optimized for the best enhancement efficiency and a measurement protocol to obtain a reliable Raman spectrum, even for a countable number of large molecules randomly distributed over the substrate.

Amino acid activation analysis of primitive aminoacyl-tRNA synthetases encoded by both strands of a single gene using the malachite green assay.

The Rodin-Ohno hypothesis postulates that two classes of aminoacyl-tRNA synthetases were encoded complementary to double-stranded DNA. Particularly, Geobacillus stearothermophilus tryptophanyl-tRNA synthetase (TrpRS, belonging to class I) and Escherichia coli histidyl-tRNA synthetase (HisRS, belonging to class II) show high complementarity of the middle base of the codons in the mRNA sequence encoding each ATP binding site. Here, for the reported 46-residue peptides designed from the three-dimensional structures of TrpRS and HisRS, amino acid activation analysis was performed using the malachite green assay, which detects the pyrophosphate departing from ATP in the forward reaction of the first step of tRNA aminoacylation. A maltose-binding protein fusion with the 46 residues of TrpRS (TrpRS46mer) exhibited high activation capacity for several amino acids in the presence of ATP and amino acids, but the activity of an alanine substitution mutant of the first histidine in the HIGH motif (TrpRS46merH15A) was largely reduced. In contrast, pyrophosphate release by HisRS46mer in the histidine activation step was lower than that in the case of TrpRS46mer. Both HisRS46mer and the alanine mutant at the 113th arginine (HisRS46merR113A) showed slightly higher levels of pyrophosphate release than the maltose-binding protein alone. These results do not rule out the Rodin-Ohno hypothesis, but may suggest the necessity of establishing unique evolutionary models from different perspectives.

Nephroprotective effect of Emblica officinalis fruit extract against malachite green toxicity in piscine model: Ultrastructure and oxidative stress study.

Malachite green (MG) is a multi-application dye with raised concern as aquatic toxicant. Cyprinus carpio fingerlings were exposed to MG and simultaneously fed with Emblica officinalis (EO) fruit extract to mitigate the MG induced nephrotoxicity. MG exposure developed depressed activity of antioxidant enzymes such as catalase, superoxide dismutase, glutathione-s-transferase, and reduced glutathione, while levels of malondialdehyde got significantly (p < .05) elevated after 60 days MG exposure. H&E staining revealed increased intracellular space, vacuolation, fluid-filled spaces, damaged brush border lining of proximal convoluted tubule (PCT), focal necrosis, nuclear transformations and shrunken glomerulus. Further, Transmission electron microscope study detailed structural cytotoxicity with the appearance of the heterochromatic nucleus, electron-dense lysosomal bodies, damaged brush border lining of PCT, and necrosis; glomerulus exhibited erythrocyte infiltration and fused pedicels of podocyte. While, EO extract supplemented diet culminated in the restoration of the renal cytoarchitecture and significantly (p < .05) enhanced activity of antioxidant enzymes.

Dye-decolorization of a newly isolated strain Bacillus amyloliquefaciens W36.

Dye-decolorization is one of the most important steps in dye-polluted wastewater treatment. The dye-decolorization bacteria were isolated from active sludge collected from wastewater treating pond of a dyeing and printing plant using serial dilution method. Among the 44 bacteria isolates from the active sludge, the strain Bacillus amyloliquefaciens W36 was found to have strong ability in dye-decolorization. The effects of carbon source, nitrogen sources, C/N, metal ions, temperature, pH, and rotation speed for dye-decolorization were investigated. The optimum decolorization conditions were that the strain was grown in enriched mineral salt medium (EMSM) using maltose 1 g/L, (NH4)2SO4 1 g/L as carbon and nitrogen source respectively, supplemented with 100 mg/L different dyes (pH 6.0), at 30 °C, 200 rpm from 48 to 96 h. The bacteria could aerobically decolorize dyes, such as Coomassie brilliant blue (95.42%), Bromcresol purple (93.34%), Congo red (72.37%) and Sarranine (61.7%), within 96 h. The dyes decolorization products were analyzed by ultra-violet and visible (UV-vis) spectroscopy before and after decolorization, which indicated that the four dyes were significantly degraded by the strain. The results indicated that the bacteria Bacillus amyloliquefaciens W36 could be used in dye-polluted wastewater treatment.

Comments on "Treatment of malachite green dye containing solution using bio-degradable sodium alginate/NaOH treated activated sugarcane baggsse charcoal beads: Batch, optimization using response surface methodology and continuous fixed bed column study" and "Adsorption and oxidation of ciprofloxacin in a fixed bed column using activated sludge derived activated carbon".

This comment analyses the results of the fixed-bed column modeling from the studies published by Gupta and Garg (2019), and Das et al. (2020), which are the last two papers on this topic published in this journal.

Fluorescence detection of malachite green in fish tissue using red emissive Se,N,Cl-doped carbon dots.

Facile detection of malachite green (MG), a toxic dye, in aquaculture is urgently demanded for environment and food safety. Herein, we design a novel fluorescent probe, namely red emissive Se,N,Cl-doped carbon dots (CDs), to accurately determinate MG. CDs are prepared by hydrothermal treatment of selenourea and o-phenylenediamine in HCl solution. This material exhibits excitation-independent dual emissions at 625 and 679 nm, with a high quantum yield of 23.6%. A selective and sensitive fluorescent sensor toward MG is established based on inner filter effect, because both the excitation and emission light of CDs can be strongly absorbed by MG. The fluorescence quenching of CDs is linear to the MG concentration over the range of 0.07-2.50 µM with a low detection limit of 21 nM. Trace-level analysis of MG in fish tissue is successfully explored, demonstrating the great potential of the proposed sensor for MG monitoring in aquatic products.

The role of silver nanoparticles biosynthesized by Anabaena variabilis and Spirulina platensis cyanobacteria for malachite green removal from wastewater.

In this study, biosynthesis of silver nanoparticles (AgNPs) using two species of cyanobacteria, Anabaena variabilis (Kütz) and Spirulina platensis (Gomont) was investigated and evaluated for dye removing capacity. The formation of AgNPs was detected by the change in colour using UV-Vis spectroscopy and further characterised by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). The obtained AgNPs were spherical to oval with average particle size of 17.9 and 26.4 nm for S. platensis and A. variabilis, respectively. These AgNPs were applied as bio-sorbent for the removal of malachite green (MG) dye released into wastewater. Within the tested initial concentration range of MG, the reaction exhibited first order kinetics model as monitored via UV spectroscopy. As the dye concentration decreased, the removal efficiency increased to reach 93% for S. platensis and 82% for A. variabilis AgNPs. The results also indicated that increased AgNPs concentration enhanced the MG removal with an efficiency up to 88% and 81% for S. platensis and A. variabilis AgNPs, respectively. The smaller particle diameter and larger specific surface area of S. platensis AgNPs enabled boosted catalytic activity for dye removal than those of A. variabilis. After the treatment with AgNPs, the resultant dye- AgNPs-free effluent proved non-toxic to Triticum aestivum L (Giza 171) seedlings, implying their safety for cultivation practices.

Facile fabrication of green nano pure CeO2 and Mn-decorated CeO2 with Cassia angustifolia seed extract in water refinement by optimal photodegradation kinetics of malachite green.

To eradicate the aquatic pollution caused by dyes, trendily the global researchers provide dedication to dye degradation using nanostructured photocatalyst. This research work is dedicated to explore an advanced, facile, bio-compact green fabricated nanostructure for water refinement. In this regard, plant-mediated syntheses of pure CeO2 and Mn-decorated CeO2 nano-powders have been inspected using seed extract of Cassia angustifolia. Investigations through UV-diffuse reflectance spectroscopy explored the significantly tuned band gap of Mn:CeO2. FT-IR spectroscopy shows the existing functional groups of high-potential phenolic compounds, proteins, and amino acids in Cassia angustifolia act as reducing and capping agents involved in the green fabricated nanostructured samples. X-ray diffraction pattern has been exposed to crystalline cubic fluorite morphology in a single phase and it leads to a regulated optimized amount of Mn on CeO2 nanostructure. The FESEM analysis predicts the morphology of CeO2 in spherical and Mn:CeO2 in flower-like structure. The HRTEM analysis has portrayed particle size of CeO2 is 11 nm and tuned Mn:CeO2 nanostructure is 9 nm. The HRTEM images revealed the average particle size in the range 10-12 nm in CeO2 and 8-9 nm in 5 mol% Mn:CeO2 nanoparticles. It showed a decrease in average particle size with an increase in Mn concentration and the reduction in size may be due to the replacement of Ce(IV) with Mn(II) ions. The elemental composition in nanostructure was predicted using energy-dispersive X-ray analysis. The rapid photocatalytic degradation efficiency of malachite green was effectually performed and compared with the kinetics model of Mn:CeO2 and pure CeO2 nanostructures. From the augmented results, tuned Mn:CeO2 was found to act as the finest green fabricated photocatalyst in the amputation of lethal and carcinogenic dye.