Phosphorus-nitrogen compounds. Part 58. Syntheses, structural characterizations and biological activities of 4-fluorobenzyl-spiro(N/O)cyclotriphosphazene derivatives.

The starting compound, tetrachloro-4-fluorobenzyl-spiro(N/O)cyclotriphosphazene (2), was synthesized from the substitution reaction of hexachlorocyclotriphosphazatriene (N3P3Cl6; trimer; HCCP) with sodium 3-(4-fluorobenzylamino)-1-propanoxide (1). Reactions of spiro (2) with excess 1-(2-aminoethyl)-piperidine, 4-(2-aminoethyl)-morpholine, 1-(2-hydroxyethyl)piperidine and 4-(2-aminoethyl)morpholine yielded the fully substituted cyclotriphosphazene derivatives (2a-2d), respectively. Elemental analysis, mass spectrometry (ESI-MS), FTIR, 1H-, 13C- and 31P-NMR data confirmed the structure of the new cyclotriphosphazenes (2a-2d); and the crystal structure of 2 was also identified by X-ray crystallography. The quantum mechanical DFT calculations of 2 were performed to estimate the geometry optimization, total energy, orientation of frontier molecular orbitals (HOMOs and LUMOs), and chemical parameters. In addition, antibacterial and antifungal activities of the fully substituted 4-fluorobenzyl-spiro(N/O)cyclotriphosphazenes (2a-2d) were investigated against G(+) and G(-) bacteria and fungi. Using agarose gel electrophoresis, the DNA cleavage activities of these phosphazenes on double-stranded plasmid DNA were evaluated. To evaluate the abilities of compounds 2a-2d to inhibit cell proliferation in different concentrations, the antiproliferative and antimigrative activities against prostate adenocarcinoma (PC3), breast cancer (MCF7) and colon cancer (HT29) cell lines were studied in vitro; and the compound 2c was determined to be the most efficient against the three cancer cells.Communicated by Ramaswamy H. Sarma.

ß-Cyclodextrin-Derivative-Functionalized Graphene Oxide/Graphitic Carbon Nitride Composites with a Synergistic Effect for Rapid and Efficient Sterilization.

The nonselectivity of phototherapy and the hydrophobicity of phototherapy agents limit their application in the treatment of antibiotic-resistant bacteria. In this work, ß-cyclodextrin-derivative-functionalized graphene oxide (GO)/graphitic carbon nitride (g-C3N4) antibacterial materials (CDM/GO/CN) were designed and synthesized. CN is used as a photosensitizer for photodynamic therapy (PDT) and GO as a photothermal agent for photothermal therapy (PTT). In addition, the supramolecular host-guest complex on the substrate can not only increase the inherent water solubility of the substrate and reduce the aggregation of the photosensitizer/photothermal agent but also manipulate the interaction between the photosensitizer/photothermal agent and bacteria to capture specific bacteria. The hyperthermia caused by PTT denatures proteins on the cell membrane, allowing reactive oxygen species (ROS) to enter the cell better and kill bacteria. The specific capture of Escherichia coli CICC 20091 by mannose significantly improves the sterilization efficiency and reduces side effects. The synergistic antibacterial agent shows excellent antibacterial efficacy of over 99.25% against E. coli CICC 20091 after 10 min of 635 + 808 nm dual-light irradiation. Moreover, cell proliferation experiments show that the composite material has good biocompatibility, expected to have applications in bacterial infections.

Phosphorus-nitrogen compounds: part 53-synthesis, characterization, cytotoxic and antimicrobial activity, DNA interaction and molecular docking studies of new mono- and dispirocyclotriphosphazenes with pendant arm(s).

Mono-/dispirocyclotriphosphazenes with pendant arm(s) are robust, but they are less investigated inorganic ring systems. In this study, a series of mono (3 and 4)- and dispirocyclotriphosphazenes with 4-chloro-benzyl pendant arm(s) (13-16) was obtained from the Cl exchange reactions of hexachlorocyclotriphosphazene with sodium (N-benzyl)aminopropanoxides (1 and 2). When compound (3) reacted with excess pyrrolidine, morpholine, tetra-1,4-dioxa-8-azaspiro[4,5]decane (DASD) and piperidine, the fully substituted monospirocyclotriphosphazenes (7, 9, 10 and 12) occurred. But, the reactions of 4 with excess piperidine and morpholine produced the gem-piperidino (5)- and morpholino (6)-substituted monospirocyclotriphosphazenes, whereas the reactions of 4 with excess pyrrolidine and DASD gave the fully substituted monospirocyclotriphosphazenes (8) and (11). However, it should be indicated that these derivatives were obtained to be used for the investigation of their spectral, stereogenic and biological properties. The structures of 5, 7 and 14 were determined crystallographically. X-ray data of 5 and 14 displayed that both of compounds were chiral in solid state, and their absolute configurations were assigned as R and RR. Additionally, the antimicrobial activities of phosphazenes were investigated. Minimum inhibitory concentrations, minimal bacterial concentrations and minimum fungicidal concentrations of phosphazenes were determined. The interactions of phosphazenes with plasmid DNA were evaluated by agarose gel electrophoresis. The cytotoxic activities of compounds were studied against L929 fibroblast and DLD-1 colon cancer cells. In addition, density functional theory calculations of 5, 7 and 14 were reported, and their molecular docking studies with DNA, E. coli DNA gyrase and topoisomerase IV were presented.

Physisorption of bio oil nitrogen compounds onto montmorillonite.

We assess computationally the adsorption of a series of nitrogen containing heterocycles and fatty acid amides from bio-oil on a model clay surface, Na-montmorillonite. The adsorption energies and conformations predicted by atomistic detail molecular dynamics (MD) simulations are compared against density functional theory (DFT) based molecular electrostatic potentials (MEP) and Hirshfeld, AIM, Merz-Singh-Kollman, and ChelpG charges. MD predicts systematically adsorption via cation bridging with adsorption strength of the heterocycles following purine > pyridine > imidazole > pyrrole > indole > quinoline. The fatty acid amides adsorption strength follows the steric availability and bulkiness of the head group. A comparison against the DFT calculations shows that MEP predicts adsorption geometries and the MD simulations reproduce the conformations for single adsorption site species. However, the DFT derived charge distibutions show that MD force-fields with non-polarizable fixed partial charge representations parametrized for aqueous environments cannot be used in apolar solvent environments without careful accuracy considerations. The overall trends in adsorption energies are reproduced by the Charmm GenFF employed in the MD simulations but the adsorption energies are systematically overestimated in this apolar solvent environment. The work has significance both for revealing nitrogen compound adsorption trends in technologically relevant bio oil environments but also as a methodological assessment revealing the limits of state of the art biomolecular force-fields and simulation protocols in apolar bioenvironments.

PVA based nanofiber containing cellulose modified with graphitic carbon nitride/nettles/trachyspermum accelerates wound healing.

Today, bacterial cellulose has received a great deal of attention for its medical applications due to its unique structural properties such as high porosity, good fluid uptake, good strength, and biocompatibility. This study aimed to fabricate and study bacterial cellulose/graphitic carbon nitride/nettles/trachyspermum nanocomposite by immersion and PVA/BC/g-C3 N4 /nettles/trachyspermum nanofiber by electrospinning method as a wound dressing. The g-C3 N4 and g-C3 N4 solution were synthesized and then were characterized using Fourier transform infrared, X-ray diffraction, Zeta Potential, and scanning electronic microscope analyzes. Also, the antibacterial properties of the synthesized materials were proved by gram-positive and gram-negative bacteria using the minimum inhibitory concentration method. Besides, the toxicity, migration, and cell proliferation results of the synthesized materials on NIH 3T3 fibroblasts were evaluated using MTT and scratch assays and showed that the BC/PVA/g-C3 N4 /nettles/trachyspermum composite not only had no toxic effect on cells but also contributed to cell survival, cell migration, and proliferation has done. To evaluate the mechanical properties, a tensile strength test was performed on PVA/BC/g-C3 N4 /nettles/trachyspermum nanofibers, and the results showed good strength of the nanocomposite. In addition, in vivo assay, the produced nanofibers were used to evaluate wound healing, and the results showed that these nanofibers were able to accelerate the wound healing process so that after 14 days, the wound healing percentage showed 95%. Therefore, this study shows that PVA/BC/g-C3 N4 /nettles/trachyspermum nanofibers effectively inhibit bacterial growth and accelerate wound healing.

4-in-1 Fe3O4/g-C3N4@PPy-DOX nanocomposites: Magnetic targeting guided trimode combinatorial chemotherapy/PDT/PTT for cancer.

At present, cancer has become a major disease threatening human health worldwide. Therefore, developing targeting guided multimode synergetic therapy has become one of the hot spots in current antitumor research and is also a great challenge. Herein, a new Fe3O4/g-C3N4@PPy-DOX nanocomposite containing magnetic iron oxide (Fe3O4) nanoparticles (NPs), lamellar structure of graphite-like carbon nitride (g-C3N4) and polypyrrole (PPy) shell with the loaded anti-tumor drug doxorubicin hydrochloride (DOX) was designed and prepared. The monodisperse Fe3O4 nanoparticles (NPs) with the diameter of 20 nm endowed the nanocomposite with the magnetic targeting ability, reducing damage to normal tissues. It is very interesting that the Fe3O4 NPs also possessed photosensitizer function for photodynamic therapy (PDT). The g-C3N4 sheets as the photocatalysis towards the degradation of water for generating O2 could effectively improve the hypoxia of solid tumors and increase the efficiency of PDT. In addition, PPy has high light-to-heat conversion efficiency, so was chosen for the cancer photothermal therapy (PTT). Finally, an anticancer drug (DOX) was loaded on the nanocomposite because the presence of mesoporous structure. Thus, the prepared Fe3O4/g-C3N4@PPy-DOX nanocomposites exhibit synergetic chemotherapy/PTT/enhanced PDT antitumor effect. This study provides an inspiration for combining targeting and multimodality to improve the anticancer efficiency.

NIR-Driven Water Splitting H2 Production Nanoplatform for H2-Mediated Cascade-Amplifying Synergetic Cancer Therapy.

As a newly emerging treatment strategy for many diseases, hydrogen therapy has attracted a lot of attention because of its excellent biosafety. However, the high diffusivity and low solubility of hydrogen make it difficult to accumulate in local lesions. Herein, we develop a H2 self-generation nanoplatform by in situ water splitting driven by near-infrared (NIR) laser. In this work, core-shell nanoparticles (CSNPs) of NaGdF4:Yb,Tm/g-C3N4/Cu3P (UCC) nanocomposites as core encapsulated with zeolitic imidazolate framework-8 (ZIF-8) modified with folic acid as shell are designed and synthesized. Due to the acid-responsive ZIF-8 shell, enhanced permeability and retention (EPR) effect, and folate receptor-mediated endocytosis, CSNPs are selectively captured by tumor cells. Upon 980 nm laser irradiation, CSNPs exhibit a high production capacity of H2 and active oxygen species (ROS), as well as an appropriate photothermal conversion temperature. Furthermore, rising temperature increases the Fenton reaction rate of Cu(I) with H2O2 and strengthens the curative effect of chemodynamic therapy (CDT). The excess glutathione (GSH) in tumor microenvironment (TME) can deplete positive holes produced in the valence band of g-C3N4 in the g-C3N4/Cu3P Z-scheme heterojunction. GSH also can reduce Cu(II) to Cu(I), ensuring a continuous Fenton reaction. Thus, a NIR-driven H2 production nanoplatform is constructed for H2-mediated cascade-amplifying multimodal synergetic therapy.

Honey as Source of Nitrogen Compounds: Aromatic Amino Acids, Free Nucleosides and Their Derivatives.

The content of selected major nitrogen compounds including nucleosides and their derivatives was evaluated in 75 samples of seven varieties of honey (heather, buckwheat, black locust, goldenrod, canola, fir, linden) by targeted ultra-high performance liquid chromatography-diode array detector - high-resolution quadrupole time-of-flight mass spectrometry (UHPLC-DAD-QqTOF-MS) and determined by UHPLC-DAD. The honey samples contained nucleosides, nucleobases and their derivatives (adenine: 8.9 to 18.4 mg/kg, xanthine: 1.2 to 3.3 mg/kg, uridine: 17.5 to 51.2 mg/kg, guanosine: 2.0 to 4.1 mg/kg; mean amounts), aromatic amino acids (tyrosine: 7.8 to 263.9 mg/kg, phenylalanine: 9.5 to 64.1 mg/kg; mean amounts). The amounts of compounds significantly differed between some honey types. For example, canola honey contained a much lower amount of uridine (17.5 ± 3.9 mg/kg) than black locust where it was most abundant (51.2 ± 7.8 mg/kg). The presence of free nucleosides and nucleobases in different honey varieties is reported first time and supports previous findings on medicinal activities of honey reported in the literature as well as traditional therapy and may contribute for their explanation. This applies, e.g., to the topical application of honey in herpes infections, as well as its beneficial activity on cognitive functions as nootropic and neuroprotective, in neuralgia and is also important for the understanding of nutritional values of honey.

Phototherapy with layered materials derived quantum dots.

Quantum dots (QDs) originating from two-dimensional (2D) sheets of graphitic carbon nitride (g-C3N4), graphene, hexagonal boron nitride (h-BN), monoatomic buckled crystals (phosphorene), germanene, silicene and transition metal dichalcogenides (TMDCs) are emerging zero-dimensional materials. These QDs possess diverse optical properties, are chemically stable, have surprisingly excellent biocompatibility and are relatively amenable to surface modifications. It is therefore not difficult to see that these QDs have potential in a variety of bioapplications, including biosensing, bioimaging and anticancer and antimicrobial therapy. In this review, we briefly summarize the recent progress of these exciting QD based nanoagents and strategies for phototherapy. In addition, we will discuss about the current limitations, challenges and future prospects of QDs in biomedical applications.

Preparation of P-g-C3N4-WS2 nanocomposite and its application in photoelectrochemical detection of 5-formylcytosine.

DNA formylation (5-formylcytosine, 5fC) is a major epigenetic modification involved in alterations in the DNA double helix structure and protein identification. Due to the low amount in all mammalian tissues and cells, it is necessary to develop a rapid, sensitive and efficient method for detecting 5fC for further understanding the biological functions of 5fC. Thus, a novel PEC biosensor was constructed using P-g-C3N4-WS2 nanocomposite as photoactive material. Firstly, AuNPs/P-g-C3N4-WS2/ITO electrode was prepared as substrate electrode. Secondly, the probe DNA and complementary DNA (containing 5fC base) was modified to the electrode surface based on the formation of Au-S bonds between AuNPs and thiol group on the probe DNA and hybridization, respectively. Finally, the amino functionalized MnO2 nanoflowers were further modified to the electrode surface by covalent interaction between the aldehyde group on the 5fC and the amino group on MnO2 nanoflowers. The sensitive and specific detection of 5fC can be achieved by oxidizing ascorbic acid with MnO2 nanoflowers and quenching the photoactivity of P-g-C3N4-WS2 nanocomposite. The sensor has a detection range of 0.01-200 nM and a detection limit of 3.8 pM. Moreover, this sensor has excellent detection specificity, stability and reproducibility.

Effect of shading and nitrogen fertilization on nitrogen metabolism, essential oil content and antimicrobial activity of Achillea millefolium

The Achillea millefolium L. is a perennial herb with important antibacterial, antifungal, anti-inflammatory, antitumoral, and antioxidant properties. This research aimed to investigate the effect of shading (75%; black net) and nitrogen fertilization (0, 75 and 150 kg urea ha-1) on the nitrogen metabolism, essential oil yield and antimicrobial activity of A.millefolium at vegetative- and reproductive-stage. The evaluated parameters varied depending on the organ and the phenological stage of the plant considered. Overall, our findings indicated that shading decreased nitrogen assimilation. Decreased activities of nitrate reductase and glutamine synthetase were observed on shaded plants during reproductive and vegetative stages, respectively. Nitrate and total amino acid levels increased in shaded plants at the vegetative stage. Regarding nitrogen supply, the improved nitrogen metabolism and essential oil yield values were accompanied by intermediate concentrations of urea (75 kg ha-1). Plants fertilized with 75 kg urea ha-1 produced the highest amino acids concentration (vegetative stage), ammonium concentration (vegetative stage) and essential oil yield (reproductive stage). Shading or nitrogen supply did not influence the microbial activity of A. millefolium essential oil.However, the essential oil of leaves and flowers were highly effective against fungi and bacteria, especially gram-positive bacteria. In conclusion, the current study showed that full light and 75 kg urea ha-1 enhanced the nitrogen metabolism of A. millefolium in both vegetative and reproductive stages.

Dual-signal sandwich electrochemical immunosensor for amyloid ß-protein detection based on Cu-Al2O3-g-C3N4-Pd and UiO-66@PANI-MB.

Combining of amperometric and square wave voltammetric methods (SWV), the dual-signal sandwich electrochemical immunosensor was developed for quantitative determination of amyloid ß-protein (Aß). Cu was doped into Al2O3 lattice (Cu-Al2O3) and reacts with graphite carbon nitride (g-C3N4) to generate Cu-Al2O3-g-C3N4 with internal dual-reaction center structure, which has good catalytic properties of hydrogen peroxide (H2O2). Subsequently, palladium nanoparticles (Pd NPs) was introduced into Cu-Al2O3-g-C3N4 (Cu-Al2O3-g-C3N4-Pd) that not only synergistically catalyzed H2O2 but also immobilized anti-Aß (Ab1) via Pd-NH2. The Cu-Al2O3-g-C3N4-Pd was used as matrix material to modify the electrode, which can produce obviously electrochemical signals through Amperometry i-t curve. Meanwhile, the Zr6O4(OH)4(CO2)12 (UiO-66) modified with polyaniline (PANI) has the large specific surface, good conductivity and adsorption capacity, which can support methylene blue (MB) as signal label of anti-Aß (Ab2). Therefore, the UiO-66@PANI-MB can provide an obviously electrochemical signal about MB through SWV. Under optimal conditions, the dual-signal sandwich electrochemical immunosensor has salient analytical performance and both signal platforms provide more accurate results. The linear range of detection obtained by the immunosensor was 10 fg/mL-100 ng/mL, and the detection limit was 3.3 fg/mL. This method not only provided a reliable guarantee for the experimental detection but also provided an effective strategy for the detection of other biological.

Surface plasmon coupling electrochemiluminescence assay based on the use of AuNP@C3N4QD@mSiO2 for the determination of the Shiga toxin-producing Escherichia coli (STEC) gene.

This work describes a surface plasmon coupling electrochemiluminescence (SPC-ECL) method for the determination of the Shiga toxin-producing Escherichia coli (STEC) gene. Firstly, gold nanoparticles (Au NPs) were encapsulated into a solid silica core (AuNP@SiO2). Secondly, graphite phase carbon nitride quantum dots (g-C3N4 QDs) were embedded in the mesoporous silica shell (mSiO2) to form nanospheres of type AuNP@C3N4QD@mSiO2. It is found that the surface plasmon coupling effect of the Au NPs in the solid silica core strongly enhances the ECL of the g-C3N4/K2S2O8 system. The mSiO2 carry much of the ECL luminophore (g-C3N4 QDs), and the co-reactant can readily pass the mesopores to react with QDs to give an ECL reaction. Because of these two features, the ECL is 3.8 times stronger compared to ECL sensing using g-C3N4 QDs only. Finally, AuNP@C3N4QD@mSiO2 was linked to the probe DNA to construct a competitive DNA sensor. When no target DNA is added, most of the capture DNA on the electrode is complementary to the probe DNA of AuNP@C3N4QD@mSiO2-probe DNA. At this time, the ECL signal is the strongest. When the target DNA is added, some of the capture DNA is paired with it and the remaining capture DNA is paired with the probe DNA. Consequently, less luminophore reaches the electrode and the signal is weaker. The method works in the 0.1 pM to 1 nM concentration range and has a 9 fM detection limit. It was successfully applied to the ultrasensitive determination of the STEC gene in human serum. Graphical abstract Schematic illustration for the "egg-yolk puff" structured ECL sensor based on Au NPs, g-C3N4 QDs, and mesoporous silica shell.

Photoelectrochemical determination of ractopamine based on inner filter effect between gold nanoparticles and graphitic carbon nitride-copper(II) polyphthalocyanine coupled with 3D DNA stabilizer.

Copper(II) polyphthalocyanine (CuPPc) was combined with graphitic carbon nitride (g-C3N4) to form a heterojunction with enhanced photoelectrochemical (PEC) signal. A sensitive PEC method was developed for determination of ractopamine based on a PEC inner filter effect between gold nanoparticles (AuNPs) and the g-C3N4/CuPPc. A gold electrode was modified with g-C3N4/CuPPc and the DNA was linked to the AuNPs. Initially, the PEC signal is weak due to the inner filter effect between the AuNPs and g-C3N4/CuPPc. In the presence of ractopamine, it interacts with the aptamer and the complementary chain (C chain) is released. This triggers the entropy-driven cyclic amplification and results in the release of the substrate B chain (SB chain) from three-dimensional DNA stabilizer. The probe is released from the electrode due to the interaction of probe DNA and the SB chain. As a result, the PEC signal increases linearly in the 0.1 pmol·L-1 to 1000 pmol·L-1 ractopamine concentration range. The detection limit is 0.03 pM, and the relative standard deviation is 3.4% (at a 10 pmol·L-1 level; for n = 11). The method has been successfully applied to the determination of ractopamine in pork samples. Graphical abstract Schematic presentation of detection method based on PEC inner filter effect between AuNPs and the g-C3N4/CuPPc being fabricated for ractopamine. 3D DNA was used as stabilizer to decrease the PEC blank signal.

New Nitrogen Compounds Coupled to Phenolic Units with Antioxidant and Antifungal Activities: Synthesis and Structure⁻Activity Relationship.

A selection of 1-amino-2-arylidenamine-1,2-(dicyano)ethenes 3 was synthesized and cyclized to 2-aryl-4,5-dicyano-1H-imidazoles 4 upon reflux in ethyl acetate/acetonitrile, in the presence of manganese dioxide. These compounds were tested for their antioxidant capacity by cyclic voltammetry, 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical and deoxyribose degradation assays. The minimum inhibitory concentration of all compounds was evaluated against two yeast species, Saccharomyces cerevisiae and Candida albicans. Their toxicity was tested in mammal fibroblasts. Among the synthesised compounds, two presented dual antioxidant/antifungal activity without toxic effects in fibroblasts. The new compounds synthesized in this work are potential biochemical tools and/or therapeutic drugs.

Analysis of oxidised heavy paraffininc products by high temperature comprehensive two-dimensional gas chromatography.

Heavy petroleum fractions are produced during crude and synthetic crude oil refining processes and they need to be upgraded to useable products to increase their market value. Usually these fractions are upgraded to fuel products by hydrocracking, hydroisomerization and hydrogenation processes. These fractions are also upgraded to other high value commercial products like lubricant oils and waxes by distillation, hydrogenation, and oxidation and/or blending. Oxidation of hydrogenated heavy paraffinic fractions produces high value products that contain a variety of oxygenates and the characterization of these heavy oxygenates is very important for the control of oxidation processes. Traditionally titrimetric procedures are used to monitor oxygenate formation, however, these titrimetric procedures are tedious and lack selectivity toward specific oxygenate classes in complex matrices. Comprehensive two-dimensional gas chromatography (GC×GC) is a way of increasing peak capacity for the comprehensive analysis of complex samples. Other groups have used HT-GC×GC to extend the carbon number range attainable by GC×GC and have optimised HT-GC×GC parameters for the separation of aromatics, nitrogen-containing compounds as well as sulphur-containing compounds in heavy petroleum fractions. HT-GC×GC column combinations for the separation of oxygenates in oxidised heavy paraffinic fractions are optimised in this study. The advantages of the HT-GC×GC method in the monitoring of the oxidation reactions of heavy paraffinic fraction samples are illustrated.

Characterization of sulfur and nitrogen compounds in Brazilian petroleum derivatives using ionic liquid capillary columns in comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detection.

Diesel and naphtha samples were analyzed using ionic liquid (IL) columns to evaluate the best column set for the investigation of organic sulfur compounds (OSC) and nitrogen(N)-containing compounds analyses with comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry detector (GC×GC/TOFMS). Employing a series of stationary phase sets, namely DB-5MS/DB-17, DB-17/DB-5MS, DB-5MS/IL-59, and IL-59/DB-5MS, the following parameters were systematically evaluated: number of tentatively identified OSC, 2D chromatographic space occupation, number of polyaromatic hydrocarbons (PAH) and OSC co-elutions, and percentage of asymmetric peaks. DB-5MS/IL-59 was chosen for OSC analysis, while IL59/DB-5MS was chosen for nitrogen compounds, as each stationary phase set provided the best chromatographic efficiency for these two classes of compounds, respectively. Most compounds were tentatively identified by Lee and Van den Dool and Kratz retention indexes, and spectra-matching to library. Whenever available, compounds were also positively identified via injection of authentic standards.

Quantitative analysis of nitrogen containing compounds in microalgae based bio-oils using comprehensive two-dimensional gas-chromatography coupled to nitrogen chemiluminescence detector and time of flight mass spectrometer.

Insight in the composition of the algae derived bio-oils is crucial for the development of efficient conversion processes and better upgrading strategies for microalgae. Comprehensive two-dimensional gas chromatography (GC×GC) coupled to nitrogen chemiluminescence detector (NCD) and time-of-flight mass spectrometer (TOF-MS) allows to obtain the detailed quantitative composition of the nitrogen containing compounds in the aqueous and the organic fraction of fast pyrolysis bio-oils from microalgae. Normal phase (apolar×mid-polar) and reverse phase column (polar×apolar) combination are investigated to optimize the separation of the detected nitrogen containing compounds. The reverse phase column combination gives the most detailed information in terms of the nitrogen containing compounds. The combined information from the GC×GC-TOF-MS (qualitative) and GC×GC-NCD (quantitative) with the use of a well-chosen internal standard, i.e. caprolactam, enables the identification and quantification of nitrogen containing compounds belonging to 13 different classes: amines, imidazoles, amides, imides, nitriles, pyrazines, pyridines, indoles, pyrazoles, pyrimidines, quinolines, pyrimidinediones and other nitrogen containing compounds which were not assigned to a specific class. The aqueous fraction mostly consists of amines (4.0wt%) and imidazoles (2.8wt%) corresponding to approximately 80wt% of the total identified nitrogen containing compounds. On the other hand, the organic fraction shows a more diverse distribution of nitrogen containing compounds with the majority of the compounds quantified as amides (3.0wt%), indoles (2.0wt%), amines (1.7wt%) and imides (1.3wt%) corresponding to approximately 65wt% of the total identified nitrogen containing compounds.

Alumina-entrapped Ag catalyzed nitro compounds coupled with alcohols using borrowing hydrogen methodology.

Supported silver catalysts were reported for the first time to be able to catalyze the coupling reaction between nitroarenes and alcohols via the borrowing hydrogen scheme. The recyclable, non-leaching catalyst is synthesized by the entrapment method, which allows entrapping of silver nanoparticles in an alumina matrix. Alcohols, acting as the reducing agents for nitro-groups, alkylated the resultant amines smoothly over these silver catalysts giving a yield of >98% towards the N-substituted amines. In this process, multiple steps were realized in one-pot over a single catalyst with very high efficiency. It offers another clean and economic way to achieve amination of alcohols.

Removal of endocrine-disrupting chemicals and conventional pollutants in a continuous-operating activated sludge process integrated with ozonation for excess sludge reduction.

Sludge ozonation is considered as a promising technology to achieve a complete reduction of excess sludge, but as yet its effects on the removal of endocrine-disrupting chemicals (EDCs) and conventional pollutants (i.e., COD, N and P) in the activated sludge process are still unclear. In this study, two lab-scale continuous-operating activated sludge treatment systems were established: one was operated in conjunction with ozonation for excess sludge reduction, and the other was operated under normal conditions as control. The results indicate that an ozone dose of 100 mg O3 g(-1)SS led to a zero yield of excess sludge in the sludge-reduction system during a continuous-operating period of 45d. Although ozonation gave a relatively lower specific oxygen uptake rate of activated sludge, it had little effect on the system's removal performance of COD and nitrogen substances. As a plus, sludge ozonation contributed a little more removal of target EDCs (estrone, 17ß-estrodiol, estriol, 17α-ethinylestradiol, bisphenol A, and 4-nonylphenol). However, the total phosphorus removal declined notably due to its accumulation in the sludge-reduction system, which necessitates phosphorus recovery for the activated sludge process.