Does California's Low Carbon Fuel Standards reduce carbon dioxide emissions?

The Low Carbon Fuel Standards (LCFS) represents a new policy approach designed to reduce carbon dioxide emissions by applying standards to all stages of motor fuel production. We use the synthetic control and difference-in-differences econometric methods, and Lasso machine learning to analyze the effect of the LCFS on emissions in California's transportation sector. The three different techniques provide robust evidence that the LCFS reduced carbon dioxide emissions in California's transportation sector by around 10%. Furthermore, our calculations show that improved air quality, due to the application of the LCFS, may have benefited California in the magnitude of hundreds of millions of dollars through an increase in worker's productivity.

Influence of a portable air treatment unit on health-related quality indicators of indoor air in a classroom.

During periods of two weeks in February and June 2010 the performance of portable air treatment units (PATUs) was evaluated in a primary school classroom using indicators of indoor air quality. Air samples were collected in an undisturbed setting on weekend days and in an occupied setting during teaching hours. In the first week PATUs were turned off and in the second week they were turned on. On weekend days PATUs reduced indoor levels of PM-10 by 87% in February and by 70% in June compared to weekend days when PATUs were turned off. On schooldays, indoor PM-10 was increased by 6% in February and reduced by 42% in June. For PM-2.5 reductions on weekend days were 89% in February and 80% in June. On school days PM-2.5 was increased by 15% in February and reduced by 83% in June. Turning on the PATUs reduced total VOC by 80% on weekend days and by 57% on school days (but not in June). No influence on formaldehyde, NO(2), O(3) and molds was observed. PATUs appeared to be less effective in removal of air pollutants when used in an occupied classroom compared to an unoccupied setting. Our study suggests that such devices should be tested in real-life settings to evaluate their influence on indoor air quality.

Baseline levels of bioaerosols and volatile organic compounds around a municipal waste incinerator prior to the construction of a mechanical-biological treatment plant.

New waste management programs are currently aimed at developing alternative treatment technologies such as mechanical-biological treatment (MBT) and composting plants. However, there is still a high uncertainty concerning the chemical and microbiological risks for human health, not only for workers of these facilities, but also for the population living in the neighborhood. A new MBT plant is planned to be constructed adjacently to a municipal solid waste incinerator (MSWI) in Tarragona (Catalonia, Spain). In order to evaluate its potential impact and to differentiate the impacts of MSWI from those of the MBT when the latter is operative, a pre-operational survey was initiated by determining the concentrations of 20 volatile organic compounds (VOCs) and bioaerosols (total bacteria, gram-negative bacteria, fungi and Aspergillus fumigatus) in airborne samples around the MSWI. The results indicated that the current concentrations of bioaerosols (ranges: 382-3882, 18-790, 44-926, and <1-7 CFU/m(3) for fungi at 25 degrees C, fungi at 37 degrees C, total bacteria, and gram-negative bacteria, respectively) and VOCs (ranging from 0.9 to 121.2 microg/m(3)) are very low in comparison to reported levels in indoor and outdoor air in composting and MBT plants, as well in urban and industrial zones. With the exception of total bacteria, no correlations were observed between the environmental concentrations of biological agents and the direction/distance from the facility. However, total bacteria presented significantly higher levels downwind. Moreover, a non-significant increase of VOCs was detected in sites closer to the incinerator, which means that the MSWI could have a very minor impact on the surrounding environment.

Household CO and PM measured as part of a review of China's National Improved Stove Program.

UNLABELLED: In 2001-2003, a team of researchers from the United States and China performed an independent, multidisciplinary review of China's National Improved Stove Program carried out since the 1980s. As part of a 3500-household survey, a subsample of 396 rural households were monitored for particulate matter less than 4 microm (PM(4)) in kitchens and living rooms over 24 h, of which 159 were measured in both summer and winter. Carbon monoxide was measured in a 40% subsample. The results of this indoor air quality (IAQ) component indicate that for nearly all household stove or fuel groupings, PM(4) levels were higher than - and sometimes more than twice as high as - the national PM(10) standard for indoor air (150 microg PM(10)/m(3)). If these results are typical, then a large fraction of China's rural population is now chronically exposed to levels of pollution far higher than those determined by the Chinese government to harm human health. Further, we observed highly diverse fuel usage patterns in these regions in China, supporting the observations in the household survey of multiple stoves being present in many kitchens. Improved stoves resulted in reduced PM(4) from biomass fuel combinations, but still not at levels that meet standards, and little improvement was observed in indoor pollution levels when other unimproved stoves were present in the same kitchen. As many households change fuels according to daily and seasonal factors, resulting in different seasonal concentrations in living rooms and kitchens, assessing health implications from fuel use requires longitudinal evaluation of fuel use and IAQ levels, combined with accurate time-activity information. PRACTICAL IMPLICATIONS: Leaving aside the difficult issue of enforcement, it is uncertain whether Chinese household IAQ standards represent realistic objectives for current attainment given current patterns of energy consumption in rural China, which rely so heavily on unprocessed solid fuels. Even when used with chimneys, these fuels emit substantial pollution into the household environment. It is probable that low-emission technologies involving gaseous/liquid fuels or high combustion - efficiency biomass stoves need to be promoted in order to achieve these standards for the greater part of the population.

Effect of government actions on technological innovation for SO2 control.

The relationship between government actions and innovation in environmental control technology is important for the design of cost-effective policies to achieve environmental goals. This paper examines such relationships for the case of sulfur dioxide control technology for U.S. coal-fired power plants. The study employs several complementary research methods, including analyses of key government actions, technology patenting activity, technology performance and cost trends, knowledge transfer activities, and expert elicitations. Our results indicate that government regulation appears to be a greater stimulus to inventive activity than government-sponsored research support alone, and that the anticipation of regulation also spurs inventive activity. Regulatory stringency focuses this activity along particular technical pathways and is a key factor in creating markets for environmental technologies. We also find that with greater technology adoption, both new and existing systems experience notable efficiency improvements and capital cost reductions. The important role of government in fostering knowledge transfer via technical conferences and other measures is also seen as an important factor in promoting environmental technology innovation.

Comparative studies of the mutagenicity of environmental tobacco smoke from cigarettes that burn or primarily heat tobacco.

The mutagenicity of particulate matter concentrated from environmental tobacco smoke (ETS) from a prototype cigarette that primarily heats tobacco was compared to that of four popular commercially available cigarettes that burn tobacco. ETS was generated by six individuals simultaneously smoking 1 cigarette each in a 20-min time period in a 45 m3 environmental chamber operated in the static mode (without ventilation). Respirable suspended particles (RSP) were collected on polytetrafluoroethylene (PTFE) filters at a flow rate of 3 LPM for 120 min. Less ETS-RSP (86-90%) was emitted by the prototype tobacco-heating cigarette than by the tobacco-burning cigarettes. RSP was extracted from the filters by sequential sonication in acetone and dichloromethane. The acetone extract was dried under nitrogen and the dichloromethane filtrate was added and then dried to obtain ETS-RSP for testing. Mutagenicity was assessed in the microsuspension modification of the Ames Salmonella/microsome assay with strains TA98 and YG1024 in the presence of 5% S9 metabolic activation. The results show that the mutagenic activity of RSP from the prototype cigarette was reduced by 75-83% on a per-mg basis when compared to the commercially available cigarettes and was reduced by 96-98% when calculated as revertants/m3 air under identical smoking conditions.