Bio-Inspired Transparent Soft Jellyfish Robot.

Jellyfish are among the widely distributed nature creatures that can effectively control the fluidic flow around their transparent soft body, thus achieving movements in the water and camouflage in the surrounding environments. Till now, it remains a challenge to replicate both transparent appearance and functionalities of nature jellyfish in synthetic systems due to the lack of transparent actuators. In this work, a fully transparent soft jellyfish robot is developed to possess both transparency and bio-inspired omni motions in water. This robot is driven by transparent dielectric elastomer actuators (DEAs) using hybrid silver nanowire networks and conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/waterborne polyurethane as compliant electrodes. The electrode exhibits large stretchability, low stiffness, high transmittance, and excellent conductivity at large strains. Consequently, the highly transparent DEA based on this hybrid electrode, with Very-High-Bond membranes as dielectric layers and polydimethylsiloxane as top coating, can achieve a maximum area strain of 146% with only 3% hysteresis loss. Driven by this transparent DEA, the soft jellyfish robot can achieve vertical and horizontal movements in water, by mimicking the actual pulsating rhythm of an Aurelia aurita. The bio-inspired robot can serve multiple functions as an underwater soft robot. The hybrid electrodes and bio-inspired design approach are potentially useful in a variety of soft robots and flexible devices.

Combination of cellulose and plant oil toward sustainable bottlebrush copolymer elastomers with tunable mechanical performance.

In this work, sustainable cellulose-g-poly(lauryl acrylate-co-acrylamide) [Cell-g-P(LA-co-AM)] bottlebrush copolymer elastomers derived from cellulose and plant oil were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Differential scanning calorimeter (DSC) results indicate that these thermally stable Cell-g-P(LA-co-AM) bottlebrush copolymer elastomers show adjustable melting temperatures. Monotonic and cyclic tensile tests suggest that the mechanical properties, including tensile strength, extensibility, Young's modulus, and elasticity, can be conveniently controlled by changing the LA/AM feed ratio and cellulose content. In such kind of bottlebrush copolymer elastomers, the rigid cellulose backbones act as cross-linking points to provide tensile strength. The incorporated PAM segments can form additional network structure via hydrogen bonding, resulting in enhanced tensile strength but decreased extensibility when more PAM segments are introduced. This versatile strategy can promote the development of sustainable cellulose-based bottlebrush copolymer elastomers from renewable resources.

Improvement of Impact Strength of Polylactide Blends with a Thermoplastic Elastomer Compatibilized with Biobased Maleinized Linseed Oil for Applications in Rigid Packaging.

This research work reports the potential of maleinized linseed oil (MLO) as biobased compatibilizer in polylactide (PLA) and a thermoplastic elastomer, namely, polystyrene-b-(ethylene-ran-butylene)-b-styrene (SEBS) blends (PLA/SEBS), with improved impact strength for the packaging industry. The effects of MLO are compared with a conventional polystyrene-b-poly(ethylene-ran-butylene)-b-polystyrene-graft-maleic anhydride terpolymer (SEBS-g-MA) since it is widely used in these blends. Uncompatibilized and compatibilized PLA/SEBS blends can be manufactured by extrusion and then shaped into standard samples for further characterization by mechanical, thermal, morphological, dynamical-mechanical, wetting and colour standard tests. The obtained results indicate that the uncompatibilized PLA/SEBS blend containing 20 wt.% SEBS gives improved toughness (4.8 kJ/m2) compared to neat PLA (1.3 kJ/m2). Nevertheless, the same blend compatibilized with MLO leads to an increase in impact strength up to 6.1 kJ/m2, thus giving evidence of the potential of MLO to compete with other petroleum-derived compatibilizers to obtain tough PLA formulations. MLO also provides increased ductile properties, since neat PLA is a brittle polymer with an elongation at break of 7.4%, while its blend with 20 wt.% SEBS and MLO as compatibilizer offers an elongation at break of 50.2%, much higher than that provided by typical SEBS-g-MA compatibilizer (10.1%). MLO provides a slight decrease (about 3 °C lower) in the glass transition temperature (Tg) of the PLA-rich phase, thus showing some plasticization effects. Although MLO addition leads to some yellowing due to its intrinsic yellow colour, this can contribute to serving as a UV light barrier with interesting applications in the packaging industry. Therefore, MLO represents a cost-effective and sustainable solution to the use of conventional petroleum-derived compatibilizers.

Mimicry of a biophysical pathway leads to diverse pollen-like surface patterns.

A ubiquitous structural feature in biological systems is texture in extracellular matrix that gains functions when hardened, for example, cell walls, insect scales, and diatom tests. Here, we develop patterned liquid crystal elastomer (LCE) particles by recapitulating the biophysical patterning mechanism that forms pollen grain surfaces. In pollen grains, a phase separation of extracellular material into a pattern of condensed and fluid-like phases induces undulations in the underlying elastic cell membrane to form patterns on the cell surface. In this work, LCE particles with variable surface patterns were created through a phase separation of liquid crystal oligomers (LCOs) droplet coupled to homeotropic anchoring at the droplet interface, analogously to the pollen grain wall formation. Specifically, nematically ordered polydisperse LCOs and isotropic organic solvent (dichloromethane) phase-separate at the surface of oil-in-water droplets, while, different LCO chain lengths segregate to different surface curvatures simultaneously. This phase separation, which creates a distortion in the director field, is in competition with homeotropic anchoring induced by sodium dodecyl sulfate (SDS). By tuning the polymer chemistry of the system, we are able to influence this separation process and tune the types of surface patterns in these pollen-like microparticles. Our study reveals that the energetically favorable biological mechanism can be leveraged to offer simple yet versatile approaches to synthesize microparticles for mechanosensing, tissue engineering, drug delivery, energy storage, and displays.

A full factorial experimental design to study the effect of flavoring agents on the mechanical properties of curcumin chewing gum tablets with high solids content.

Objective: Developing chewing gum tablets (CGTs) with high drug loads is a challenge due to the loss of mastication properties. We postulated that poor mastication properties of such gums could be improved by adjusting the concentration of liquid flavors to serve as plasticizers and consequently increase the flexibility of the elastomer in the gum base. To test this hypothesis, the objective of this work was to evaluate the effects of flavor type and concentration, and storage conditions on the textural properties of CGTs loaded with 20% curcumin (CUR) by weight.Methods: CGTs were made by directly compressing Health in Gum® base with CUR. The resultant CGTs were characterized by single and two bites textural tests to measure their yield strength, post-bite failure rate, and compressibility.Results: Flavor concentration (X2) had a significant impact on the masticatory properties of the chewing gums, which could be ascribed to the plasticizing effect of peppermint oil. Addition of liquid flavors and storage at low temperature (X4) produced CGTs with the desirable properties of low yield strength (Y1) and post-bite structural failure rate (Y2), and high compressibility (Y3). The effect of flavors however was negated at high temperatures, especially when flavored gums were stored for extended time at 50 °C. Flavor type (X1) on the other hand had no effect on the masticatory properties of the chewing gums.Conclusions: This study concluded that it is feasible to formulate CGTs with high solids content without negatively impacting their mechanical properties by controlling the concentration of liquid flavors.

Tough Ordered Mesoporous Elastomeric Biomaterials Formed at Ambient Conditions.

Synthetic dry elastomers are randomly cross-linked polymeric networks with isotropic and unordered higher-level structural features. However, their growing use as soft-tissue biomaterials has demanded the need for an ordered and anisotropic nano-micro (or) mesoarchitecture, which is crucial for imparting specific properties such as hierarchical toughening, anisotropic mechanics, sustained drug delivery, and directed tissue growth. High processing cost, poor control in 3D, and compromised mechanical properties have made it difficult to synthesize tough and dry macroscopic elastomers with well-organized nano-microstructures. Inspired from biological design principles, we report a tough ordered mesoporous elastomer formed via bottom-up lyotropic self-assembly of noncytotoxic, polymerizable amphiphilic triblock copolymers and hydrophobic polymers. The elastomer is cross-linked using covalent cross-links and physical hydrophobic entanglements that are organized in a periodic manner at the nanoscale. This transforms into a well-ordered hexagonal arrangement of nanofibrils that are highly oriented at the micron scale, further organized as 3D macroscale objects. The ordered nano-microstructure and molecular multinetwork endows the elastomer with hierarchical toughening while possessing excellent stiffness and elongation comparable to engineering elastomers like silicone and vulcanized rubber. Processing of the elastomer is performed at ambient conditions using 3D printing and photo-cross-linking, which is fast and energy efficient and enables production of complex 3D objects with tailorable sub-millimeter features such as macroporosity. Furthermore, the periodic and amphiphilic nanostructure permits functionalization of the elastomer with secondary components such as inorganic nanoparticles or drug molecules, enabling complementary mechanical properties such as high stiffness and functional capabilities such as in localized drug delivery applications.

Multi-functional soft-bodied jellyfish-like swimming.

The functionalities of the untethered miniature swimming robots significantly decrease as the robot size becomes smaller, due to limitations of feasible miniaturized on-board components. Here we propose an untethered jellyfish-inspired soft millirobot that could realize multiple functionalities in moderate Reynolds number by producing diverse controlled fluidic flows around its body using its magnetic composite elastomer lappets, which are actuated by an external oscillating magnetic field. We particularly investigate the interaction between the robot's soft body and incurred fluidic flows due to the robot's body motion, and utilize such physical interaction to achieve different predation-inspired object manipulation tasks. The proposed lappet kinematics can inspire other existing jellyfish-like robots to achieve similar functionalities at the same length and time scale. Moreover, the robotic platform could be used to study the impacts of the morphology and kinematics changing in ephyra jellyfish.

Mimicking biological stress-strain behaviour with synthetic elastomers.

Despite the versatility of synthetic chemistry, certain combinations of mechanical softness, strength, and toughness can be difficult to achieve in a single material. These combinations are, however, commonplace in biological tissues, and are therefore needed for applications such as medical implants, tissue engineering, soft robotics, and wearable electronics. Present materials synthesis strategies are predominantly Edisonian, involving the empirical mixing of assorted monomers, crosslinking schemes, and occluded swelling agents, but this approach yields limited property control. Here we present a general strategy for mimicking the mechanical behaviour of biological materials by precisely encoding their stress-strain curves in solvent-free brush- and comb-like polymer networks (elastomers). The code consists of three independent architectural parameters-network strand length, side-chain length and grafting density. Using prototypical poly(dimethylsiloxane) elastomers, we illustrate how this parametric triplet enables the replication of the strain-stiffening characteristics of jellyfish, lung, and arterial tissues.

Starch-based bio-elastomers functionalized with red beetroot natural antioxidant.

Red beetroot (RB) powder was incorporated into starch-based bio-elastomers to obtain flexible biocomposites with tunable antioxidant properties. Starch granules within the bio-elastomers affected the release of the antioxidant molecule betanin in the RB powder. The bio-elastomers were hydrophobic and resisted dissolution in water, hence the release of betanin was due to diffusion rather than polymer matrix disintegration. Hydrophobicity was maintained even after water immersion. Released betanin demonstrated highly efficient antioxidant scavenging activity against 2,2-diphenyl-1-picrylhydrazyl free radical (DPPH) and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation (ABTS(+)). RB powder was also found to increase the Young's modulus of the bio-elastomers without compromising their elongation ability. Infrared spectral analysis indicated weak interactions through hydrogen bonding among starch granules, RB powder and PDMS polymer within the bio-elastomers. Hence, as a simple but intelligent biomaterial consisting of mainly edible starch and RB powder the present bio-elastomers can be used in active packaging for a variety of pharmaceutical, medical, and food applications.

Effect of a single dose of low-level laser therapy on spontaneous and chewing pain caused by elastomeric separators.

INTRODUCTION: The aim of this study was to see the effect of a single dose of low-level laser therapy on spontaneous and chewing pain after the placement of elastomeric separators. METHODS: Eighty-eight patients were randomly selected for this single-blind study. Elastomeric separators were placed mesial and distal to the permanent first molars in all quadrants. Both arches were divided into experimental and control sides. The experimental sides were treated with low-level laser therapy on 3 points on the buccal mucosa for 20 seconds each, with a 940-nm gallium-aluminum-arsenic diode laser on continuous mode and power set at 200 mW. The other side received placebo laser therapy without turning on the laser. A numeric rating scale was used to assess the intensity of spontaneous and chewing pain for the next 7 days. The independent sample t test and repeated-measures analysis of variance with the post hoc Tukey test was used to analyze the results. RESULTS: Significant differences were found in spontaneous and chewing pain among both groups (P <0.05). CONCLUSIONS: A single dose of low-level laser therapy can be an efficient modality to reduce the postoperative pain associated with the placement of elastomeric separators.

Comparison of conventional and plant-extract disinfectant solutions on the hardness and color stability of a maxillofacial elastomer after artificial aging.

STATEMENT OF PROBLEM: Silicone elastomers undergo physical and chemical degradation with disinfecting solutions. Phytotherapy may be a suitable solution for disinfection. However, its effect on the properties of the silicone material is unknown. PURPOSE: The purpose of this in vitro study was to evaluate the effect of disinfection with conventional and plant-extract solutions and of artificial aging on the hardness and color stability of a facial silicone associated with pigments and an opacifier. MATERIAL AND METHODS: Four hundred specimens of silicone (MDX4-4210) were fabricated (5×6 mm). Two pigment shades and 1 dry opacifier were combined in the tested material, and 4 groups (n=10) were obtained: colorless (GI), colorless with opacifier (GII), medium pigment with opacifier (GIII), and black pigment with opacifier (GIV). Specimens were subjected to disinfection (30 days) using saline solution, water, and neutral soap (digital friction, 30 seconds), chlorhexidine 4%, Hydrastis canadensis, and Cymbopogon nardus extracts (immersion, 10 minutes). Shore A hardness (ASTM D2240) and color analyses were performed before and after disinfection. Specimens were then exposed to 1008 hours of artificial aging (ASTM 53) and subjected to final hardness and color readings. The results were analyzed with ANOVA and the Tukey significant difference test (α=.05). RESULTS: The opacifier increased the hardness (GII). For GII, the H. canadensis solution and the friction with water and soap promoted significantly reduced hardness; the friction also promoted a reduction in this property for GIV. The GIII was not affected after disinfection. A significant difference was found between the ΔE values of the specimens disinfected with H. canadensis, C. nardus, and chlorhexidine, and specimens subjected to saline solution and neutral soap. CONCLUSION: The hardness of MDX4-4210 after the experimental procedure was considered clinically acceptable for facial prostheses. All groups showed clinically unacceptable color alterations regardless of the disinfecting solution.

Color stability and force decay of clear orthodontic elastomeric chains: An in vitro study.

OBJECTIVE: To compare the percentage force decay of clear and semi-clear elastomeric chain products from eight different manufacturers and to evaluate the amount of discoloration after immersion in colored dietary media of the same elastomeric chain products. MATERIAL AND METHODS: An in vitro study was designed using an electronic force gauge to measure six samples from each of 19 types of elastomeric chains stretched for a period of four weeks. A spectrophotometer was used to measure the color of each specimen (10 of each type) at baseline and after being soaked in a dietary medium (coffee, tea, cola, and wine in 250 ml amounts) for 72 h. RESULTS: There was a significant difference in the percentage of the lost initial force between all the tested E-chains (P<0.001). ANOVA shows a significant difference in the amount of discoloration between the E-chain types (P<0.001). Semi-clear (tooth-color/pearl/obscure) E-chain types (TP-ToothC, OrthO-Pearl, GAC-SiliPearl, 3M-Obscure) present significantly less change in color than clear E-chains of the same brand (TP-Clear, OrthoO-Clear, GAC-SiliClear, 3M-Clear). CONCLUSIONS: Significant differences in the mean percentage force decay between the 19 studied clear elastomeric chain types were present. AO-Memory and Ormco maintained most of their original force at the end of the four-week interval. Significant differences in discoloration also exist between the various types of E-chains. TP Orthodontics (Tooth-Colored, SuperSlick, Clear) and Ortho Organizers (Pearl) showed the least discoloration.

Low-level laser therapy effects on pain perception related to the use of orthodontic elastomeric separators.

INTRODUCTION: Some patients refer to pre-banding orthodontic separation as a painful orthodontic procedure. Low-level laser therapy (LLLT) has been reported to have local analgesic effect. OBJECTIVE: The aim of this single-blind study was to investigate the perception of pain caused by orthodontic elastomeric separators with and without a single LLLT application (6J). METHODS: The sample comprised 79 individuals aged between 13 and 34 years old at orthodontic treatment onset. Elastomeric separators were placed in first maxillary molars at mesial and distal surfaces and kept in place for three days. The volunteers scored pain intensity on a visual analogue scale (VAS) after 6 and 12 hours, and after the first, second and third days. One third of patients received laser applications, whereas another third received placebo applications and the remaining ones were controls. Applications were performed in a split-mouth design. Thus, three groups (laser, placebo and control) were assessed. RESULTS: No differences were found among groups considering pain perception in all periods observed. CONCLUSION: The use of a single-dose of LLLT did not cause significant reduction in orthodontic pain perception. Overall pain perception due to orthodontic separator placement varied widely and was usually mild.

Low-level laser therapy effects on pain perception related to the use of orthodontic elastomeric separators

INTRODUCTION: Some patients refer to pre-banding orthodontic separation as a painful orthodontic procedure. Low-level laser therapy (LLLT) has been reported to have local analgesic effect. OBJECTIVE: The aim of this single-blind study was to investigate the perception of pain caused by orthodontic elastomeric separators with and without a single LLLT application (6J). METHODS: The sample comprised 79 individuals aged between 13 and 34 years old at orthodontic treatment onset. Elastomeric separators were placed in first maxillary molars at mesial and distal surfaces and kept in place for three days. The volunteers scored pain intensity on a visual analogue scale (VAS) after 6 and 12 hours, and after the first, second and third days. One third of patients received laser applications, whereas another third received placebo applications and the remaining ones were controls. Applications were performed in a split-mouth design. Thus, three groups (laser, placebo and control) were assessed. RESULTS: No differences were found among groups considering pain perception in all periods observed. CONCLUSION: The use of a single-dose of LLLT did not cause significant reduction in orthodontic pain perception. Overall pain perception due to orthodontic separator placement varied widely and was usually mild. .

INTRODUÇÃO: alguns pacientes referem-se à separação ortodôntica pré-bandagem como um procedimento doloroso. Tem sido relatado que a terapia com laser de baixa intensidade (LLLT) produz um efeito analgésico local. OBJETIVO: o objetivo deste estudo simples-cego foi investigar a percepção da dor causada por elásticos ortodônticos separadores, com ou sem uma única aplicação de LLLT (6J). MÉTODOS: a amostra foi composta por 79 indivíduos com 13-34 anos de idade no início do tratamento ortodôntico. Elásticos separadores foram colocados nos molares superiores, nas proximais mesial e distal, e mantidos por três dias. Os voluntários marcaram a intensidade da dor em uma escala visual analógica (EVA) após 6 horas, 12 horas, 1 dia, 2 dias e 3 dias. Um terço dos dentes separados recebeu aplicações de laser; outro terço, aplicações placebo; e os demais foram usados como controle. As aplicações foram realizadas segundo um desenho metodológico de boca dividida. Portanto, foram comparados três grupos: laser, placebo e controle. RESULTADOS: não foram encontradas diferenças entre os grupos, em relação à percepção de dor, em nenhum dos períodos observados. CONCLUSÕES: a utilização da LLLT em dose única não causou redução significativa na dor ortodôntica. Além disso, a percepção geral da dor devida à colocação de separadores ortodônticos variou muito e foi, geralmente, leve. .

Biodegradable elastomers and silicon nanomembranes/nanoribbons for stretchable, transient electronics, and biosensors.

Transient electronics represents an emerging class of technology that exploits materials and/or device constructs that are capable of physically disappearing or disintegrating in a controlled manner at programmed rates or times. Inorganic semiconductor nanomaterials such as silicon nanomembranes/nanoribbons provide attractive choices for active elements in transistors, diodes and other essential components of overall systems that dissolve completely by hydrolysis in biofluids or groundwater. We describe here materials, mechanics, and design layouts to achieve this type of technology in stretchable configurations with biodegradable elastomers for substrate/encapsulation layers. Experimental and theoretical results illuminate the mechanical properties under large strain deformation. Circuit characterization of complementary metal-oxide-semiconductor inverters and individual transistors under various levels of applied loads validates the design strategies. Examples of biosensors demonstrate possibilities for stretchable, transient devices in biomedical applications.

Binary release of ascorbic acid and lecithin from core-shell nanofibers on blood-contacting surface for reducing long-term hemolysis of erythrocyte.

There is an urgent need to develop blood-contacting biomaterials with long-term anti-hemolytic capability. To obtain such biomaterials, we coaxially electrospin [ascorbic acid (AA) and lecithin]/poly (ethylene oxide) (PEO) core-shell nanofibers onto the surface of styrene-b-(ethylene-co-butylene)-b-styrene elastomer (SEBS) that has been grafted with poly (ethylene glycol) (PEG) chains. Our strategy is based on that the grafted layers of PEG render the surface hydrophilic to reduce the mechanical injure to red blood cells (RBCs) while the AA and lecithin released from nanofibers on blood-contacting surface can actively interact with RBCs to decrease the oxidative damage to RBCs. We demonstrate that (AA and lecithin)/PEO core-shell structured nanofibers have been fabricated on the PEG grafted surface. The binary release of AA and lecithin in the distilled water is in a controlled manner and lasts for almost 5 days; during RBCs preservation, AA acts as an antioxidant and lecithin as a lipid supplier to the membrane of erythrocytes, resulting in low mechanical fragility and hemolysis of RBCs, as well as high deformability of stored RBCs. Our work thus makes a new approach to fabricate blood-contacting biomaterials with the capability of long-term anti-hemolysis.

Thermoset elastomers derived from carvomenthide.

Renewable thermoset elastomers were prepared using the plant-based monomer carvomenthide. Controlled ring-opening transesterification polymerization of carvomenthide using diethylene glycol as an initiator gave α,ω-dihydroxyl poly(carvomenthide) (HO-PCM-OH), which was subsequently converted to carboxy-telechelic poly(carvomenthide) (HOOC-PCM-COOH) by esterification with excess succinic anhydride through a one-pot, two-step process, leading to no crystallinity, high viscosity, strong thermal resistance, and low glass transition temperature of the resulting functionalized polyester. Thermal curing processes of the resulting 3, 6, and 12 kg mol(-1) prepolymers were achieved with trifunctional aziridine to give cross-linked PCM elastomers. The thermal properties, mechanical behavior, and biocompatibility of the rubbery thermoset products were investigated by differential scanning calorimetry, thermal gravimetric analysis, dynamic mechanical analysis, tensile tests under static and cyclic loads, and cell adherence. These new materials are useful candidates to satisfy the design objective for the engineering of a variety of soft tissues.

Microbial degradation of linseed oil-based elastomer and subsequent accumulation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer.

The microbial synthesis of environment-friendly poly(3-hydroxybutyrate--co-3-hydroxyvalerate), PHBV, has been performed by using an alkaliphilic microorganism, Alkaliphilus oremlandii OhILAs strain (GenBank Accession number NR_043674.1), at pH 8 and at a temperature of 30-32 °C through the biodegradation of linseed oil-based elastomer. The yield of the copolymer on dry cell weight basis is 90 %. The elastomers used for the biodegradation have been synthesized by cationic polymerization technique. The yield of the PHBV copolymer also varies with the variation of linseed oil content (30-60 %) in the elastomer. Spectroscopic characterization ((1)H NMR and FTIR) of the accumulated product through biodegradation of linseed oil-based elastomers indicates that the accumulated product is a PHBV copolymer consisting of 13.85 mol% of 3-hydroxyvalerate unit. The differential scanning calorimetry (DSC) results indicate a decrease in the melting (T m) and glass transition temperature (T g) of PHBV copolymer with an increase in the content of linseed oil in the elastomer, which is used for the biodegradation. The gel permeation chromatography (GPC) results indicate that the weight average molecular weight (M w) of PHBV copolymer decreases with an increasing concentration of linseed oil in the elastomer. The surface morphology of the elastomer before and after biodegradation is observed under scanning electron microscope (SEM) and atomic force microscope (AFM); these results indicate about porous morphology of the biodegraded elastomer.

Assessment of exogenous pigmentation in colourless elastic ligatures.

INTRODUCTION: The aim of this study was to evaluate colour alteration of transparent elastic ligatures submitted to exogenous pigmentation. METHODS: Forty test specimens were divided into eight groups corresponding to one commercial brand with five test specimens in each group. The test specimens were immersed into coffee and black tea solutions with the purpose of assessing colour alteration using a portable digital spectrophotometer (Vita Easyshade Compact). The surfaces of the ligatures under scanning electron microscope (SEM) at ×30, ×150 and ×20,000 magnification were evaluated with the purpose of observing the differences in porosity of the ligatures. The Kolmogorov-Smirnov test for normality was applied followed by the one-way analysis of variance (one-way ANOVA) and the level of significance adopted was 95%. RESULTS: All the groups showed modified initial colour that was perceptible to the human eye. The brand that showed greater colour alteration, in comparison with its initial colour, was the American® pearl elastic ligature and the ligatures that presented the smallest colour variation were the Ortho-Organizer®. The surface evaluations of the ligatures showed differences with regard to the topography evidencing more porosity in the ligatures that showed greater staining. CONCLUSION: The group that changed colour significantly was the one that presented the highest porosity, and the brand that was the least altered was the one that showed the lowest porosity.

3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium.

Means for high-density multiparametric physiological mapping and stimulation are critically important in both basic and clinical cardiology. Current conformal electronic systems are essentially 2D sheets, which cannot cover the full epicardial surface or maintain reliable contact for chronic use without sutures or adhesives. Here we create 3D elastic membranes shaped precisely to match the epicardium of the heart via the use of 3D printing, as a platform for deformable arrays of multifunctional sensors, electronic and optoelectronic components. Such integumentary devices completely envelop the heart, in a form-fitting manner, and possess inherent elasticity, providing a mechanically stable biotic/abiotic interface during normal cardiac cycles. Component examples range from actuators for electrical, thermal and optical stimulation, to sensors for pH, temperature and mechanical strain. The semiconductor materials include silicon, gallium arsenide and gallium nitride, co-integrated with metals, metal oxides and polymers, to provide these and other operational capabilities. Ex vivo physiological experiments demonstrate various functions and methodological possibilities for cardiac research and therapy.