Comparison of the Dynamic Postural Control During Lifting and Lowering an External Load in Low Back Pain: A Cross-Sectional Study.

OBJECTIVE: This study aimed to compare dynamic postural control between individuals with and without chronic low back pain (LBP) through load lifting and lowering. METHODS: This cross-sectional study included 52 male patients with chronic LBP (age: 33.37 ± 9.23 years) and 20 healthy male individuals (age: 31.75 ± 7.43 years). The postural control parameters were measured using a force plate system. The participants were instructed to stand barefoot (hip-width apart) on the force plate and lift a box (10% of the weight of the participants) from the waist height to overhead and then lower it from overhead to waist height. The interaction between the groups and tasks was determined using a 2-way repeated-measures analysis of variance. RESULTS: There was no significant interaction between the groups and tasks. Regardless of the groups, postural control parameters including amplitude (P = .001) and velocity (P < .001) in anterior-posterior (AP) direction, phase plane in medial-lateral (ML) direction (P = .001), phase plane in AP-ML direction (P = .001), and the mean total velocity (P < .001) were lesser during the lowering compared with lifting. The results indicated that, regardless of the tasks, the postural control parameters including velocity (P = .004) and phase plane in AP direction (P = .004), velocity in ML direction (P < .001), phase plane (AP-ML) (P = .028), and mean total velocity (P = .001) in LBP were lesser compared with the normal group. CONCLUSION: Different tasks affected postural control differently in patients with LBP and healthy individuals. Moreover, postural control was more challenged during the load-lowering than the load-lifting task. This may have been a result of a stiffening strategy. It may be that the load-lowering task might be considered as a more influential factor for the postural control strategy. These results may provide a novel understanding of selecting the rehabilitation programs for postural control disorders in patients.

"Lifting Yang to Dredging Du Meridian Manipulation" acupuncture alleviates cerebral ischemia-reperfusion injury by mediating the NF-κB pathway.

BACKGROUND: Ischemic stroke is a permanent neurological impairment resulting from the narrowing or blockage of blood vessels in the brain. The effectiveness of "Lifting Yang to Dredging Du Meridian Manipulation" (LYDD) acupuncture in clinical treatment of ischemic stroke patients has been well-established. Nevertheless, its mechanism is still uncertain. METHODS: MCAO/R rat models at different time points of reperfusion (24, 36, 48 and 72 h) were constructed, and LYDD acupuncture treatment was performed. Zea-Longa score and TTC staining were used for assessing neurological impairment and cerebral infarct in rats, respectively. The pathological changes of cerebral tissue in each group were observed by HE and Nissl's staining. Cerebral tissue from each group was subjected to RNA-seq, and differentially expressed genes (DEGs) were performed for GO and KEGG enrichment analysis, and hub gene was identified based on the String database and MCODE algorithm. RESULTS: LYDD acupuncture treatment significantly reduced Zea-Longa score, dry-wet weight ratio, infarct area, inflammatory factor levels (IL-1ß and TNF-α), cerebral lesions, number of Nissl body and neuronal apoptosis in the MCAO/R model at different time points of reperfusion. A total of 3518 DEGs were identified in the MCAO/R model compared to the control group, and 3461 DEGs were present in the treatment group compared to the MCAO/R model, and they may be implicated in neurotransmitter transmission, synaptic membrane potential, cell junctions, inflammatory response, immune response, cell cycle, and ECM. The expression trends of BIRC3, LTBR, PLCG2, TLR4 and TRADD mRNAs in the Hub gene were consistent with the RNA-seq results, and LYDD acupuncture treatment significantly inhibited MCAO/R-induced p65 nuclear translocation. CONCLUSIONS: LYDD acupuncture ameliorates cerebral ischemia-reperfusion injury by inhibiting NF-κB pathway activity.

Lifting the iron curtain of vision.

Ocular and specifically retinal toxicities of systemic medications are prevalent and encompass many disease modalities. For many of these pharmaceuticals, established follow-up protocols are in place to ensure timely detection and cessation of therapy. However, while for some disorders, cessation of therapy is a viable option due to existing treatment alternatives, for some others cessation of treatment can be life threatening and/or shorten the patient's life expectancy. Such is the case for iron chelating agents used in transfusion-dependent patients of Thalassemia, of which deferoxamine (DFO) is the most widely used. In their recent article in EMBO Molecular Medicine, Kong et al (2023) addressed the issue of DFO-induced retinal toxicity used both in vivo and in vitro techniques. Their study suggests a potentially protective role for α-ketoglutarate (AKG) supplementation against DFO toxicity.

[Unity and separation of lifting-thrusting and twirling reinforcing-reducing manipulation].

To analyze the collaborative use and separation reasons of lifting-thrusting and twirling reinforcing and reducing manipulation. Lifting-thrusting manipulation and twirling manipulation are two important contents of acupuncture methods. In traditional acupuncture and moxibustion, the two methods were used in reinforcing and reducing concert, which was mainly related to the therapeutic thought guided by the qi-blood theory and the influence of the human body structure on the technique manipulation. After the Republic of China, the separation of lifting-thrusting manipulation and twirling manipulation gradually appeared. It was related to the widespread use of "scientific acupuncture method" in later generations and the integration of neuroscience into the acupuncture treatment system.

Lifting and Toning of Arms and Calves Using High-Intensity Focused Electromagnetic Field (HIFEM) Procedure Documented by Ultrasound Assessment.

OBJECTIVE: The HIFEM procedure demonstrates positive outcomes on abdomen and buttock. This multi-center study aims to investigate its effect on adipose tissue and muscle mass located in upper arms and calves. MATERIALS AND METHODS: Twenty subjects (45.10±15.19 years, 24.44±3.22 kg/m2) who underwent a HIFEM procedure (4 sessions; 20 minutes per muscle group) on arms and calves were evaluated. Overall, 7 patients were treated over biceps and triceps, 4 patients over calves, and 9 patients underwent treatment of both upper arms and calves. The changes in adipose and muscle tissue of musculus biceps brachii, triceps brachii, and gastrocnemius were evaluated by using ultrasound. The results from a 1-month, 3-month, and 6-month follow-up were compared to the baseline. Digital photographs, weight measurements, satisfaction, and comfort questionnaires were assessed at baseline and follow-ups. RESULTS: Ultrasound images revealed a significant (P<0.05) increase in the muscle mass of all studied muscles, with the most noticeable improvement in biceps brachii (+16.13% at 3 months). The fat deposits over arms and calves showed significant improvement (P<0.05), reaching -15.12% at 3 months. The results peaked at 3 months and were sustained up to 6 months with a slight but insignificant decline. Aesthetic enhancement of treated areas was documented while patients were highly satisfied. CONCLUSIONS: The achieved outcomes showed that the HIFEM procedure is effective for muscle toning and fat reduction in arms and calves. The results suggest that the use of the HIFEM procedure is not limited only to abdominal and buttock shaping but is also effective for toning of arms and calves. J Drugs Dermatol. 2021;20(7):755-759. doi:10.36849/JDD.5878.

Unity and separation of lifting-thrusting and twirling reinforcing-reducing manipulation / 中国针灸

To analyze the collaborative use and separation reasons of lifting-thrusting and twirling reinforcing and reducing manipulation. Lifting-thrusting manipulation and twirling manipulation are two important contents of acupuncture methods. In traditional acupuncture and moxibustion, the two methods were used in reinforcing and reducing concert, which was mainly related to the therapeutic thought guided by the

Quantification of Postures for Low-Height Object Manipulation Conducted by Manual Material Handlers in a Retail Environment.

Occupational Applications Manual material handlers performing stocking tasks spent substantial amounts of time in bent postures but used traditional stoops and squats infrequently. Instead, they often used split-legged stoops and squats, where one foot is further forward than the other, and one-legged ("golfer's") lifts. During object manipulation, the distance workers reached away from their body, and the height at which they manipulated objects, were correlated with the posture used by the worker. Workers also stayed in different postures for different lengths of time. It is likely that certain postures are more comfortable for the workers to remain in, provide additional mobility or operational radius, or require less energy to use. Understanding these factors in more detail could lead to improved worker training programs, where the postures taught not only have low injury risk but are comfortable so are actually adopted and used by the workers.

Technical Abstract Background Musculoskeletal disorders are relatively common among manual material handlers. This may be due in part to challenging postures used by workers. Purpose Studying the kinematics of manual material handlers in the workplace will provide quantitative data on how they move and what postures they adopt. With these data, some insights can be determined about why workers chose certain postures. Methods We conducted an on-site workplace study to capture the full-body kinematics of manual material handlers (stockers) using inertial measurement units. We organized the observed bends into six classes: stooping, fore-aft squatting, split-legged stooping with one-heel raised, split-legged stooping with no heels raised, one-legged lifting, and mixed lifting, which include multiple forms while remaining bent. These classes were based on a new general classification of bending and lifting postures that we developed, which enumerates all of the possible forms. We quantified how frequently and for what duration the workers bent and lifted, and determined how often they performed asymmetric motions while bending. We determined the range of motion of the hand positions during each bent posture, which provides a measure of the workspace afforded by the posture. Results Workers rarely used symmetric squats and infrequently used symmetric stoops typically studied in lab settings. Instead, they used a variety of different postures that have not been well-characterized. Of the 666 bending postures recorded during the experiment, 27.3% were stoops lifts, 22.1% were one-legged lifts, 20.3% were split-legged bends with both heels on the ground, and 12.3% were split-legged bends with a heel raised. Only 4.6% of the postures were squats and only one participant used this posture. Different bending postures were correlated with different ranges of hand position used in object manipulation. One-legged lifting corresponded to bends with the hands furthest away from the body along the sagittal axis. Conclusions While our study was exploratory, we observed many kinematic forms that have not been studied much in the past, such as split-legged stooping and one-legged lifting, suggesting that future work should be done to understand the biomechanics of these postures.

Functional training of the inspiratory muscles improves load carriage performance.

Inspiratory Muscle Training (IMT) whilst adopting body positions that mimic exercise (functional IMT; IMTF) improves running performance above traditional IMT methods in unloaded exercise. We investigated the effect of IMTF during load carriage tasks. Seventeen males completed 60 min walking at 6.5 km·h-1 followed by a 2.4 km load carriage time-trial (LCTT) whilst wearing a 25 kg backpack. Trials were completed at baseline; post 4 weeks IMT (consisting of 30 breaths twice daily at 50% of maximum inspiratory pressure) and again following either 4 weeks IMTF (comprising four inspiratory loaded core exercises) or maintenance IMT (IMTCON). Baseline LCTT was 15.93 ± 2.30 min and was reduced to 14.73 ± 2.40 min (mean reduction 1.19 ± 0.83 min, p < 0.01) after IMT. Following phase two, LCTT increased in IMTF only (13.59 ± 2.33 min, p < 0.05) and was unchanged in post-IMTCON. Performance was increased following IMTF, providing an additional ergogenic effect beyond IMT alone. Practitioner Summary: We confirmed the ergogenic benefit of Inspiratory Muscle Training (IMT) upon load carriage performance. Furthermore, we demonstrate that functional IMT methods provide a greater performance benefit during exercise with thoracic loads. Abbreviations: [Lac-]B: blood lactate; FEV1: forced expiratory volume in one second; FEV1/FVC: forced expiratory volume in one second/forced vital capacity ratio; FVC: forced vital capacity; HR: heart rate; IMT: inspiratory muscle training; IMTCON: inspiratory muscle training maintenance; IMTF: functional inspiratory muscle training; LC: load carriage; LCTT: load carriage time trial; Pdi: transdiaphragmatic pressure; PEF: peak expiratory flow; PEmax: maximum expiratory mouth pressure; PImax: maximum inspiratory mouth pressure; RPE: rating of perceived exertion; RPEbreating: rating of perceived exertion for the breathing; RPEleg: rating of perceived exertion for the legs; SEPT: sport-specific endurance plank test; V̇ O2: oxygen consumption; V̇ O2peak: peak oxygen consumption.

Influencing lumbar posture through real-time biofeedback and its effects on the kinematics and kinetics of a repetitive lifting task.

BACKGROUND: Repetitive, flexed lumbar postures are a risk factor associated with low back injuries. Young, novice workers involved in manual handling also appear at increased risk of injury. The evidence for the effectiveness of postural biofeedback as an intervention approach is lacking, particularly for repetitive, fatiguing tasks. RESEARCH QUESTION: How does real-time lumbosacral (LS) postural biofeedback modify the kinematics and kinetics of repetitive lifting and the risk of low back injury? METHODS: Thirty-four participants were randomly allocated to two groups: biofeedback (BF) and non-biofeedback (NBF). Participants repetitively lifted a 13 kg box at 10 lifts per minute for up to 20 min. Real-time biofeedback of LS posture occurred when flexion exceeded 80% maximum. Three-dimensional motion analysis and ground reaction forces enabled estimates of joint kinematics and kinetics. Rating of perceived exertion (RPE) was measured throughout. RESULTS: The BF group adopted significantly less peak lumbosacral flexion (LSF) over the 20 min when compared to the NBF group, which resulted in a significant reduction in LS passive resistance forces. This was accompanied by increased peak hip and knee joint angular velocities in the BF group. Lower limb moments did not significantly differ between groups. Feedback provided to participants diminished beyond 10 min and subjective perceptions of physical exertion were lower in the BF group. SIGNIFICANCE: Biofeedback of lumbosacral posture enabled participants to make changes in LSF that appear beneficial in reducing the risk of low back injury during repetitive lifting. Accompanying behavioural adaptations did not negatively impact on physical exertion or lower limb joint moments. Biofeedback of LS posture offers a potential preventative and treatment adjunct to educate handlers about their lifting posture. This could be particularly important for young, inexperienced workers employed in repetitive manual handling who appear at increased risk of back injury.

[Summary and core technique on the origin and evolution of reinforcing-reducing manipulation achieved by lifting and thrusting the needle].

By analyzing the evolution of reinforcing-reducing manipulation achieved by lifting and thrusting the needle recorded in ancient literature of traditional Chinese medicine, it is found that the main contents of reinforcing-reducing manipulation by lifting and thrusting the needle include manipulating speed change, manual amplitude, insertion layer, gender, the direction to the acupuncture receiver, forenoon and afternoon and relevant quantity. Among them, gender, the direction to the acupuncture receiver, forenoon and afternoon and relevant quantity are the unnecessary parameters, while the manipulating speed change, manual amplitude and insertion layer are the indispensable parameters. The manipulating speed change is the core of the necessary parameters for the reinforcing-reducing manipulation achieved by lifting and thrusting the needle. Combined with the manual amplitude, the manipulating speed of needle determines the volume of needling stimulation. The insertion layer is decided on the base of the clinical demand. In the core technique of reinforcing-reducing manipulation by lifting and thrusting the needle, the reinforcing is achieved by thrusting the needle forcefully and quickly and then lifting the needle body slowly and evenly back to the original layer. The reducing is achieved by lifting the needle forcefully and quickly and then thrusting the needle body slowly and evenly back to the original layer. The manipulating speed and manual amplitude of needling are the parameters to quantize acupuncture manipulation. In association with the acupuncture effects in human body, these parameters contribute to the interpretation of the dose-effect relationship of acupuncture and the improvement of clinical effects.

Summary and core technique on the origin and evolution of reinforcing-reducing manipulation achieved by lifting and thrusting the needle / 中国针灸

By analyzing the evolution of reinforcing-reducing manipulation achieved by lifting and thrusting the needle recorded in ancient literature of traditional Chinese medicine, it is found that the main contents of reinforcing-reducing manipulation by lifting and thrusting the needle include manipulating speed change, manual amplitude, insertion layer, gender, the direction to the acupuncture receiver, forenoon and afternoon and relevant quantity. Among them, gender, the direction to the acupuncture receiver, forenoon and afternoon and relevant quantity are the unnecessary parameters, while the manipulating speed change, manual amplitude and insertion layer are the indispensable parameters. The manipulating speed change is the core of the necessary parameters for the reinforcing-reducing manipulation achieved by lifting and thrusting the needle. Combined with the manual amplitude, the manipulating speed of needle determines the volume of needling stimulation. The insertion layer is decided on the base of the clinical demand. In the core technique of reinforcing-reducing manipulation by lifting and thrusting the needle, the reinforcing is achieved by thrusting the needle forcefully and quickly and then lifting the needle body slowly and evenly back to the original layer. The reducing is achieved by lifting the needle forcefully and quickly and then thrusting the needle body slowly and evenly back to the original layer. The manipulating speed and manual amplitude of needling are the parameters to quantize acupuncture manipulation. In association with the acupuncture effects in human body, these parameters contribute to the interpretation of the dose-effect relationship of acupuncture and the improvement of clinical effects.

The effects of task execution variables on resultant vertical ground reaction force acting on foot sole during squat lifting.

The main objective of this study was to investigate the effects of task execution variables on the value and point of application of the resultant vertical ground reaction force acting on the foot sole during squat lifting. This can be of particular importance since it may help to recognize the roles of the foot sole parts in bearing the support force during industrial and labor lifting activities. Twelve healthy men lifted a box with 4, 8 and 12 kg masses at fast and slow speeds. Ground reaction force and center of pressure were measured using two parallel Kistler force-plates. In addition, a Vicon system and a 3D linked segment model were used to define the movement pattern. Significant increases resulted for the peak vertical ground reaction force with the increases in the lift speed (P < 0.05) and box weight (P < 0.05). As well a significant increase resulted for the range of center of pressure location with the increase in the box weight (P < 0.05). Moreover, significant interactions (P < 0.05) between the lift speed and box weight were detected. The front and rear parts of the foot had the most important roles in bearing the support force during the beginning and final phases of movement, respectively. Finally, it was concluded that the value and point of application of vertical ground reaction force are seemingly dependent on the momentum of the subject plus box.

The fourth delay and community-driven solutions to reduce maternal mortality in rural Haiti: a community-based action research study.

BACKGROUND: In Haiti, the number of women dying in pregnancy, during childbirth and the weeks after giving birth remains unacceptably high. The objective of this research was to explore determinants of maternal mortality in rural Haiti through Community-Based Action Research (CBAR), guided by the delays that lead to maternal death. This paper focuses on socioecological determinants of maternal mortality from the perspectives of women of near-miss maternal experiences and community members, and their solutions to reduce maternal mortality in their community. METHODS: The study draws on five semi-structured Individual Interviews with women survivors of near-misses, and on four Focus Group Discussions with Community Leaders and with Traditional Birth Attendants. Data collection took place in July 2013. A Community Research Team within a resource-limited rural community in Haiti undertook the research. The methods and analysis process were guided by participatory research and CBAR. RESULTS: Participants identified three delays that lead to maternal death but also described a fourth delay with respect to community responsibility for maternal mortality. They included women being carried from the community to a healthcare facility as a special example of the fourth delay. Women survivors of near-miss maternal experiences and community leaders suggested solutions to reduce maternal death that centered on prevention and community infrastructure. Most of the strategies for action were related to the fourth delay and include: community mobilization by way of the formation of Neighbourhood Maternal Health/Well-being Committees, and community support through the provision/sharing of food for undernourished women, offering monetary support and establishment of a communication relay/transport system in times of crisis. CONCLUSIONS: Finding sustainable ways to reduce maternal mortality requires a community-based/centred and community-driven comprehensive approach to maternal health/well-being. This includes engagement of community members that is dependent upon community knowledge, political will, mobilization, accountability and empowerment. An engaged/empowered community is one that is well placed to find ways that work in their community to reduce the fourth delay and in turn, maternal death. Potentially, community ownership of challenges and solutions can lead to more sustainable improvements in maternal health/well-being in Haiti.

Relationships Between Trunk Movement Patterns During Lifting Tasks Compared With Unloaded Extension From a Flexed Posture.

OBJECTIVES: The purpose of this study was to investigate between movement patterns of trunk extension from full unloaded flexion and lifting techniques, which could provide valuable information to physical therapists, doctors of chiropractic, and other manual therapists. METHODS: A within-participant study design was used. Whole-body kinematic and kinetic data during lifting and full trunk flexion were collected from 16 healthy male participants using a 3-dimensional motion analysis system (Vicon Motion Systems). To evaluate the relationships of joint movement between lifting and full trunk flexion, Pearson correlation coefficients were calculated. RESULTS: There was no significant correlation between the amount of change in the lumbar extension angle during the first half of the lifting trials and lumbar movement during unloaded trunk flexion and extension. However, the amount of change in the lumbar extension angle during lifting was significantly negatively correlated with hip movement during unloaded trunk flexion and extension (P < .05). CONCLUSIONS: The findings that the maximum hip flexion angle during full trunk flexion had a greater influence on kinematics of lumbar-hip complex during lifting provides new insight into human movement during lifting. All study participants were healthy men; thus, findings are limited to this group.

Reliability of SEMG measurements for trunk muscles during lifting variable loads in healthy subjects.

OBJECTIVE: The reliability of surface electromyography (SEMG) derived parameters is of high importance, but there is distinct lack of studies concerning the reliability during dynamic contractions. Particularly, the similarity index reliability has not been investigated during functional task yet. The purpose of this study was to evaluate the reliability of trunk muscle activities measured by means of surface electromyography during lifting tasks over repeated trials within a day. METHODS: Seven volunteers were assessed twice a day. SEMG signals were recorded bilaterally from seven trunk muscles. Intra class correlation coefficients (ICC) and standard error of similarity index, magnitude and timing were calculated. RESULTS: Investigation of ICC and correlation between trials showed that similarity index (ICC 0.73-0.97, correlation 0.6-0.95) is more reliable and repeatable than muscles magnitude (ICC 0.41-0.69, correlation 0.54-0.65) and it's timing (ICC 0.41-0.69, correlation 0.31-0.74) while timing had the least reliability. CONCLUSION: Similarity index can be mentioned as an appropriate motor control index and evaluation of muscle recruitment pattern should be done by considering similarity index and magnitude.

Osteoarthritis, labour division, and occupational specialization of the Late Shang China - insights from Yinxu (ca. 1250 - 1046 B.C.).

This research investigates the prevalence of human osteoarthritis at Yinxu, the last capital of the Late Shang dynasty (ca. 1250-1046 B.C.), to gain insights about lifeways of early urban populations in ancient China. A total of 167 skeletal remains from two sites (Xiaomintun and Xin'anzhuang) were analyzed to examine osteoarthritis at eight appendicular joints and through three spinal osseous indicators. High osteoarthritis frequencies were found in the remains with males showing significantly higher osteoarthritis on the upper body (compared to that of the females). This distinctive pattern becomes more obvious for males from Xiaomintun. Furthermore, Xiaomintun people showed significantly higher osteoarthritis in both sexes than those from Xin'anzhuang. Higher upper body osteoarthritis is speculated to be caused by repetitive lifting and carrying heavy-weight objects, disproportionately adding more stress and thus more osseous changes to the upper than the lower body. Such lifting-carrying could be derived from intensified physical activities in general and specialized occupations in particular. Higher osteoarthritis in males may reveal a gendered division of labour, with higher osteoarthritis in Xiaomintun strongly indicating an occupational difference between the two sites. The latter speculation can be supported by the recovery of substantially more bronze-casting artifacts in Xiaomintun. It is also intriguing that relatively higher osteoarthritis was noticed in Xiaomintun females, which seems to suggest that those women might have also participated in bronze-casting activities as a "family business." Such a family-involved occupation, if it existed, may have contributed to establishment of occupation-oriented neighborhoods as proposed by many Shang archaeologists.

Glaucoma pathogenesis and lifestyle modification

Glaucoma is the leading cause of irreversible blindness worldwide. Increased intraocular pressure is the most important risk factor for glaucoma. Lifestyle patterns that can increase intraocular pressure include smoking, caffeine consumption, lifting heavy weights, certain yoga postures, playing wind instruments, using swimming goggles, and certain sleeping positions. Lifestyle patterns that may reduce intraocular pressure include aerobic exercise. Although only limited studies have investigated the relationship between these lifestyle patterns and glaucoma, smoking cessation and aerobic exercise are recommended. For other lifestyle patterns, including caffeine consumption, lifting heavy weights, certain yoga postures, wind instruments, swimming using goggles, and certain sleeping positions, there does not seem to be sufficient evidence to prohibit them, but they should be taken into account in patients with advanced glaucoma.

Holistic sustainable development: Floor-layers and micro-enterprises.

Attracting and retaining workers is important to ensuring the sustainability of floor laying businesses, which are for the most part micro-enterprises (MiE). The aim of this paper is to shed light on the challenges MiE face in OHS implementation in the context of sustainable development. Participative ergonomics and user-centred design approaches were used. The material collected was reviewed to better understand the floor layers' viewpoints on sustainability. The solutions that were retained and the challenges encountered to make material handling and physical work easier and to develop training and a website are presented. The importance of OHS as a sustainability factor, its structuring effect, what distinguishes MiE from small businesses and possible strategies for workings with them are also discussed.

Implementation of laser acupuncture with lifting-thrusting through the use of mechanically immobile components.

Lifting and thrusting constitute an important manipulation method in traditional Chinese acupuncture. Lifting and thrusting enables the implementation of various features, such as reinforcement and reduction, which enhance acupuncture effectiveness. Laser acupuncture stimulates acupoints through laser light, which is a noninvasive treatment, but can still achieve effects similar to those obtained from traditional acupuncture. Lifting and thrusting can be achieved by moving the laser focal point back and forth, thus concentrating the energy, as does the tip of the acupuncture needle when it is moved upward and downward in the acupoint. This article presents a novel optical design of a laser acupuncture device, in which a focus-tunable lens is used to move the position of the focused light in order to achieve the lifting and thrusting mechanism through programmable changes to the control current of the focus-tunable lens. The device employs an infrared laser with a wavelength of 808 nm and a maximum power of 150 mW. The focus-tunable lens used in this study had a diopter of -10 to +5. The results revealed that by controlling the lens diopter, the focused light can be moved from 4.5 to 9.5 cm. Therefore, the range of the lift and thrust for the laser acupuncture device was 5 cm. The area of the focal point was approximately 6×10(-3) mm2, which is comparable to that of the commonly used traditional acupuncture needle tip. Because the components are immobile, no additional space is required for the moving lens. Therefore, the size of the laser acupuncture head can be minimized, and the effectiveness of focus tuning can be improved.