Efeitos do laser de baixa intensidade em osteoblastos cultivados em arcabouços nanofibrosos de ácido polilático / Effects of low-intensity laser on osteoblasts cultured on polylactic acid nanofibrous scaffolds

A engenharia de tecidos ósseos é um ramo importante da medicina regenerativa e envolve o desenvolvimento de arcabouços com composição e arquitetura favoráveis à integração celular, além do estudo de fatores capazes de promover a adesão e proliferação celular, incluindo estímulos químicos e biofísicos. O objetivo do estudo foi avaliar a utilização do laser de baixa intensidade (LBI) como uma ferramenta para promover a bioestimulação in vitro de células osteoblásticas cultivadas em arcabouços nanofibrosos de ácido polilático (PLA). Os arcabouços foram produzidos pela técnica de eletrofiação e caracterizados quanto à molhabilidade, composição pela espectroscopia no infravermelho por transformada de Fourier (FTIR), morfologia da superfície por microscópica eletrônica de varredura (MEV), caracterização termogravimétrica (TGA), calorimetria diferencial exploratória (DSC) e cristalinidade por difração de raios-X (DRX). Os ensaios biológicos foram conduzidos com osteoblastos da linhagem OFCOL II cultivados na superfície dos arcabouços e submetidos ou não (grupo controle) a irradiação com laser diodo InGaAIP na potência de 30 mW, nas doses de 1, 4 e 6 J/cm² e nos comprimentos de onda de 660 nm (grupos V1, V4, V6, respectivo as doses) e 780 nm (grupos I1, I4 e I6, respectivo as doses). Os efeitos do LBI na proliferação dos osteoblastos foram avaliados através do método bioquímico Alamar Blue, nos intervalos de 24, 48 e 72h, enquanto a viabilidade e a morfologia celular foram analisadas no intervalo de 72h, através do ensaio Live/Dead e da microscopia eletrônica de varredura (MEV), respectivamente. Os dados do ensaio bioquímico de Alamar Blue mostraram uma maior proliferação celular nos grupos V6 em todos os intervalos analíticos em comparação ao grupo controle (p<0,05). Outras diferenças entre o grupo controle e irradiados foram encontradas apenas nos intervalos de 48h e 72h para V1, e para o grupo IV6 em 72h. O ensaio Live/Dead revelou um aumento na viabilidade celular nos grupos trados com LBI, sendo significativamente maior no grupo V1 quando comparado ao grupo controle. A análise por MEV mostrou adequada interação dos osteoblastos aos arcabouços, com o corpo celular se espalhando ao longo do eixo da nanofibra e a presença de contatos físicos mais evidentes, através da formação de ligação por meio de filopódios e lamelipódios, nos grupos V1, V6 e I6. Em conjunto, os dados do presente trabalho mostraram que o LBI promove a bioestimulação de osteoblastos cultivados sobre nanofibras de PLA, o que aponta para o seu uso potencial nas técnicas de engenharia tecidual óssea, sobretudo no que se refere ao uso do comprimento de onda de 660 nm, a qual apresentou grupos com mais resultados significativos (AU).

Bone tissue engineering is a relevant branch of regenerative medicine and involves the development of scaffolds with composition and architecture favorable to cell integration, in addition to studying factors capable of promoting cell adhesion and proliferation, including chemical and biophysical stimuli. The study aimed to evaluate the use of low-level laser irradiation (LLLI) to promote in vitro biostimulation of osteoblastic cells cultured on polylactic acid (PLA) nanofibrous scaffolds. The scaffolds were produced by the electrospinning technique and characterized in terms of wettability, composition by Fourier transform infrared spectroscopy (FTIR), surface morphology by scanning electron microscopy (SEM), thermogravimetric characterization (TGA), differential scanning calorimetry (DSC) and crystallinity by Xray diffraction (XRD). The biological assays were conducted with osteoblasts of the OFCOL II lineage cultured on the surface of the scaffolds and submitted or not (control group) to irradiation with InGaAIP diode laser, power of 30 mW, with doses of 1, 4 and 6 J/cm² and wavelengths of 660 nm (groups V1, V4, V6, respectively doses) and 780 nm (groups I1, I4 and I6, respectively doses). The effects of LLLT from the perspective of osteoblasts were evaluated using the biochemical method Alamar Blue assay, at intervals of 24, 48 and 72h, while cell viability and morphology were observed at 72h, using the Live/Dead assay and electron microscopy. scan (SEM), respectively. The Alamar Blue assay data showed more significant cell proliferation in groups in the V6 groups at all analytical intervals compared to the control group (p<0.05). Other differences between the control and irradiated groups were found only at intervals of 48h and 72h for V1, and for group IV6 at 72h. The Live/Dead assay revealed an increase in cell viability in the groups treated with LLLT, being significantly higher in the V1 group when compared to the control group. SEM analysis showed adequate interaction between osteoblasts and scaffolds, with the cell body spreading along the nanofiber axis and the presence of more evident physical contacts, through the formation of bonds through filopodia and lamellipodia, in groups V1, V6 and I6. Together, the data from the present study observed that LLLT promotes the biostimulation of osteoblasts cultured on PLA nanofibers, which pointed to its potential use in bone tissue engineering techniques, especially with regard to the use of the wavelength of 660 nm, which presented groups with more significant results (AU).

Different Molarities and Dissolution-Precipitation Duration Affect the Formation of Carbonate-Apatite Blocks for Bone Graft Material

Abstract Objective: To determine diametral tensile strength and water absorption ability of Carbonate-apatite blocks fabricated from gypsum precursors (CaSO4) through a dissolution-precipitation method, with different solution molarities and immersion times. Material and Methods: Thirty-six CaSO4 gypsum specimens with 6 mm diameter; 3 mm height (Group A for diametral tensile strength) and 36 specimens of 6 mm diameter; 3 mm thickness (Group B for water absorption ability) were used. Each group was divided into 4 group treatments of: 1) dissolution-precipitation in solution of 0.5mol / L Na2CO3 + 0.5mol / L Na3PO4 for 48 hours and 72 hours; 1mol / L Na2CO3 + 1mol / L Na3PO4 for 48 hours and 72 hours. The C-Ap blocks were then tested using ATR-FTIR spectrometer to identify the formation of C-Ap functional groups. Furthermore, Group A specimens were tested for diametral tensile strength using Universal Testing Machine, and Group B specimens were tested for water adsorption ability using an analytical balance by measuring initial and final weight after immersion in saline solution at 37oC for 24 hours. Results: The formation of carbonate-apatite (C-Ap) in groups with solution molarity of 1 mol/L for 48 hours and 72 hours resulted in a lower diametral tensile strength and water absorption ability than the groups with a 0.5 mol/L solution. Conclusion: Solution with different molarities and dissolution-precipitation duration affect the formation of carbonate-apatite blocks.

Investigation of oil distribution in spray-dried chia seed oil microcapsules using synchrotron-FTIR microspectroscopy.

In this study, chia seed oil (CSO) microcapsules were produced using three types of shell materials, including chia seed protein (CPI), chia seed gum (CSG) and CPI-CSG complex coacervates. Synchrotron-Fourier transform infrared (S-FTIR) microspectroscopy was used to investigate the effect of shell materials on the distribution of CSO both on the surface and in the interior of the solid microcapsules. S-FTIR measurements were carried out in macroscopic attenuated total reflection (macro ATR) and transmission modes, to determine the surface lipid and the encapsulated lipid fractions, respectively. The amounts of lipid and protein distributed on the surface and in the interior of the microcapsules were compared based on the average spectra extracted from S-FTIR chemical images obtained from each type of the microcapsules. The unsaturated fatty acids (UFAs) to total oil ratios in all the three types of the microcapsules were closely similar to the original non-processed CSO, suggesting an effective encapsulation and thereby shielding protection of UFAs from oxidative damage during microencapsulation process. The type of the shell materials was found to affect the distribution of CSO on the surface and within the microcapsules. The complex coacervation based microcapsules had a significantly lower oil content (∼2% w/w) on the surface compared to those observed for the other two types of microcapsules (>5%, w/w).

Rapid Determination of Acid Value of Edible Oils via FTIR Spectroscopy Using Infrared Quartz Cuvette.

A Fourier transform infrared (FTIR) spectroscopy with infrared quartz cuvette (IQC) as spectral accessory method was developed to determine acid value (AV) of edible oils. The absorption peak at 5680 cm-1/5487 cm-1 ascribed to the C-H stretching band was a substitute for the peak of an internal standard. Partial least square (PLS) regression was used for AV calibration, and samples were validated by titrated method. Results showed dilution calibration was feasible for randomly dilution among 6-13:1 (CCl4: oils, v/v). PLS calibration was optimal by a spectral wavenumber (3603 cm-1-3250 cm-1) as the first derivative treatment. Correlation coefficient and root mean square error of calibration were 0.9967 and 0.135, respectively. Calibrated validation, blind sample validation and precision analysis presented a good correlation between IQC-FTIR and titrated methods. Based on the dilution calibration, randomly diluted oil samples can be employed by IQC-FTIR.

Biologically Synthesized Silver Nanoparticles for Enhancing Tetracycline Activity Against Staphylococcus aureus and Klebsiella pneumoniae

Abstract Phytochemical content of plant extracts can be used effectively to reduce the metal ions to nanoparticles in one-step green synthesis process. In this study, six plant extracts were used for the synthesis of silver nanoparticles (AgNPs). Biologically synthesized AgNPs was characterized using UV-Vis Spectrophotometer, Field Emission Scanning Electron Microscope (FE-SEM), X-ray diffraction (XRD), Energy Dispersive X-ray spectroscopy (EDX) and Fourier Transform Infrared (FTIR) spectroscopy. The individual and combined effects of AgNPs and tetracycline against S. aureus and K. pneumoniae were assessed. Ginger, onion and sidr extracts supported AgNPs formation while arak, garlic and mint extracts failed to convert the silver ions to AgNPs. The present findings revealed significant differences between the tested plant extracts in supporting AgNPs synthesis. AgNPs synthesized by ginger showed the highest individual and combined activity against tested strains followed by AgNPs prepared by sidr then that synthesized by onion. AgNPs significantly enhanced tetracycline activity (p≤0.05) against S. aureus and K. pneumoniae. The results of this study demonstrated that the combination of tetracycline and biologically synthesized AgNPs presented a useful therapeutically method for the treatment of bacterial infection and counterattacking bacterial resistance.

Observation of Mie ripples in the synchrotron Fourier transform infrared spectra of spheroidal pollen grains.

Conceptually, biological cells are dielectric, photonic resonators that are expected to show a rich variety of shape resonances when exposed to electromagnetic radiation. For spheroidal cells, these shape resonances may be predicted and analyzed using the Mie theory of dielectric spheres, which predicts that a special class of resonances, i.e., whispering gallery modes (WGMs), causes ripples in the absorbance spectra of spheroidal cells. Indeed, the first tentative indication of the presence of Mie ripples in the synchrotron Fourier transform infrared (SFTIR) absorbance spectra of Juniperus chinensis pollen has already been reported [Analyst140, 3273 (2015)ANLYAG0365-488510.1039/C5AN00401B]. To show that this observation is no isolated incidence, but a generic spectral feature that can be expected to occur in all spheroidal biological cells, we measured and analyzed the SFTIR absorbance spectra of Cunninghamia lanceolata, Juniperus chinensis, Juniperus communis, and Juniperus excelsa. All four pollen species show Mie ripples. Since the WGMs causing the ripples are surface modes, we propose ripple spectroscopy as a powerful tool for studying the surface properties of spheroidal biological cells. In addition, our paper draws attention to the fact that shape resonances need to be taken into account when analyzing (S)FTIR spectra of isolated biological cells since shape resonances may distort the shape or mimic the presence of chemical absorption bands.

Rapid Prediction of Fatty Acid Content in Marine Oil Omega-3 Dietary Supplements Using a Portable Fourier Transform Infrared (FTIR) Device and Partial Least-Squares Regression (PLSR) Analysis.

Using a portable field device, a Fourier transform infrared spectroscopy (FTIR) and partial least-squares regression (PLSR) method was developed for the rapid (<5 min) prediction of major and minor fatty acid (FA) concentrations in marine oil omega-3 dietary supplements. Calibration models were developed with 174 gravimetrically prepared samples. These models were tested using an independent validation set of dietary supplements. FAs analyzed included eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA); the sums of saturated, branched-chain, and monounsaturated FAs; and n-6, n-4, n-3, n-1, and trans polyunsaturated FA. The spectral ranges 650-1500 or 650-1500 and 2800-3050 cm-1 provided reliable predictions for FA components in 34 neat oil products: standard error of prediction, 0.73-1.58%; residual predictive deviation, 6.41-12.6. This simple, nondestructive quantitative method is a rapid screening tool and a time and cost-saving alternative to gas chromatography for verifying label declarations and in quality control.

Analysis of carbonyl value of frying oil by fourier transform infrared spectroscopy.

A rapid method for determining the carbonyl value of frying oils has been developed using Fourier-transform infrared (FTIR) spectroscopy and chemometrics. One hundred and fifty-six frying oils with different carbonyl values were collected from an actual potato frying process. FTIR spectra in the range of 4000-650 cm(-1) were scanned with a FTIR spectroscopy apparatus using the attenuated total reflectance (ATR) method. A good calibration model was obtained using the partial least-squares (PLS) regression method with full cross validation for predicting the carbonyl value of frying oils. For the model, the coefficients of determination (R(2)), standard errors of cross validation (SECV) and standard errors of prediction (SEP) were 0.99, 1.87 µmol g(-1) and 1.93 µmol g(-1), respectively. Moreover, standard deviation ratios of reference data in the validation sample set to the SEP were higher than 3. This study shows that the carbonyl value of frying oils can be successfully determined to a high accuracy using FTIR spectroscopy combined with PLS regression.

[THE DETECTION OF CONTENT OF DIAGNOSTICALLY SIGNIFICANT FATTY ACIDS AND INDIVIDUAL TRIGLYCERIDES IN BIOLOGICAL MEDIUMS BASED ON INFRARED SPECTROMETRY].

The content of clinically important fatty acids and individual triglycerides in food and biological mediums are traditionally detected by gas and fluid chromatography in various methodical modifications. The techniques are hard-to-get in laboratories of clinical biochemistry. The study was carried out to develop procedures and equipment for operative quantitative detection of concentration of fatty acids, primarily palmitic saturated fatty acid and oleic mono unsaturated fatty acid. Also detection was applied to sums ofpolyenoic (eicosapentaenoic and docosahexaenoic acid) fatty acids in biological mediums (cod-liver oil, tissues, blood plasma) using spectrometers of short-range infrared band of different types: with Fourier transform, diffraction and combined scattering. The evidences of reliable and reproducible quantitative detection offatty acids were received on the basis of technique of calibration (regression) by projection on latent structures using standard samples of mixtures of oils and fats. The evaluation is implemented concerning possibility of separate detection of content of palmitic and oleic triglycerides in mediums with presence of water The choice of technical conditions and mode of application of certain types of infrared spectrometers and techniques of their calibration is substantiated

D-α-tocopheryl polyethylene glycol 1000 succinate: a view from FTICR MS and tandem MS.

D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) is an important polymeric excipient frequently used in drug formulation. However, differing compositions of the TPGS samples between batches are believed to result in variable performance of the formulated product. Herein, a high performance method using Fourier-transform ion cyclotron resonance (FTICR) mass spectrometry (MS) and tandem mass spectrometry (MS/MS) to analyze the composition of TPGS samples and the structure of TPGS was established. Aided by high mass accuracy and high resolution, the full MS overview of TPGS is able to provide composition information, and diagnostic fragments from collisionally activated dissociation (CAD) and electron capture dissociation (ECD) MS/MS can be used for the identification of the TPGS structure. ECD and CAD show different preferences in bond cleavage, and an interesting cross-ring cleavage was generated by CAD. Fragmentation information from ECD/ECD MS(3) is useful for providing confidence in the results. The influence of different ionization agents (Na(+), Li(+), and Ag(+)) on fragmentation of TPGS was investigated with the silver adduct providing different fragments. In addition to the methodology study, the MS and MS/MS results from four batches of TPGS samples from two manufacturers were compared. This method can be utilized for the composition and structure study of many other polymeric compounds. FTICR MS/MS demonstrated its promising role as a structural characterization tool complementary to traditional spectroscopy techniques.

Spectroscopic approaches for phosphorus speciation in soils and other environmental systems.

In the past decades, environmental scientists have become increasingly involved in developing novel approaches for applying emerging spectroscopic techniques to complex environmental matrices. The objective of this review is to convey the most common chemical species of phosphorus reported for soils, sediments, model systems, and waste materials based on analyses by four spectroscopic techniques: X-ray absorption near-edge structure, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and Raman spectroscopy. Unique information is provided by each technique at a level of specificity that depends in part on matrix complexity. The X-ray absorption near-edge structure and nuclear magnetic resonance techniques reveal inorganic and organic P species in intact environmental matrices or in chemical extracts, whereas the Fourier transform infrared and Raman techniques can provide more specific bonding information about mineral or adsorbed P species in model analogs of matrix components. The most common P species in soils and sediments as indicated by spectroscopy are hydroxyapatite and octacalcium phosphate minerals, phosphate adsorbed on Fe- and Al-oxides, pyrophosphates and polyphosphates, phosphate mono- and di-esters, and phosphonates. Continued advancements in spectroscopic methods should improve speciation-based models of P mobilization and transformations in the environment.

Measurement of conjugated linoleic acid (CLA) in CLA-rich potato chips by ATR-FTIR spectroscopy.

A conjugated linoleic acid (CLA)-rich soy oil has been produced by photoisomerization of soy oil linoleic acid. Nutritional studies have shown that CLA possesses health benefits in terms of reducing certain heart disease and diabetes risk factors. Potato chips are snacks that are readily produced in the CLA-rich soy oil containing CLA levels similar to those of the oil used for frying. The objective of this study was to develop an FTIR method to rapidly determine the CLA content of oil in potato chips. Photoirradiated soy oil samples with ∼25% total CLA were mixed with control soy oil, and 100 soy oil samples with total CLA levels ranging from 0.89 to 24.4% were made. Potato chips were fried using each of these 300 g CLA rich soy oil mixtures at 175 °C for approximately 3 min. Duplicate GC-FID fatty acid analyses were conducted on oil extracted from each batch of potato chips. The chip samples were ground and then scanned using ATR-FTIR spectroscopy with the aid of a high-pressure clamp, and duplicate spectra of each sample were averaged to obtain an average spectrum. Calibration models were developed using PLS regression analysis. These correlated the CLA isomer concentrations of potato chips obtained by GC-FID fatty acid analysis with their corresponding FTIR spectral features. The calibration models were fully cross validated and tested using samples that were not used in the calibration sample set. Calibrations for total CLA, trans,trans CLA, trans-10,cis-12 CLA, trans-9,cis-11 CLA, cis-10,trans-12 CLA, and cis-9,trans-11 CLA had coefficients of determinations (R2v) between 0.91 and 0.96 and corresponding root-mean-square error of prediction (RMSEP) ranging from 0.005 to 1.44. The ATR-FTIR technique showed potential as a method for the determination of the CLA levels in unknown potato chip samples.

Silicon nitride as a versatile growth substrate for microspectroscopic imaging and mapping of individual cells.

Herein is described a general sampling protocol that includes culture, differentiation and fixing of cells in their preferred morphology on the one sample substrate (Si(3)N(4)) to enable subsequent diverse modern microspectroscopic analyses. The protocol enables unprecedented correlated and complementary information on the intracellular biochemistry of metabolic processes, diseases and their treatment, which offers the opportunity to revolutionize our understanding of cell and tissue biology at a molecular level. The culture of adherent cells onto inexpensive Si(3)N(4) membranes allows microspectroscopic analyses across the electromagnetic spectrum, from hard X-ray fluorescence (both XRF and XANES), through to visible and fluorescence light microscopies, and infrared microspectroscopy without substrate interference. Adherent mammalian cell lines (3T3-L1 adipocytes and H9c2 cardiac myocytes) illustrate the in vitro application of these protocols. The cells adhered strongly to Si(3)N(4) membranes and visually displayed normal proliferative and phenotypic growth; more importantly, rapid alcohol fixation of cells did not affect their structural integrity for subsequent analyses.

Metabolism of fatty acids and lipid hydroperoxides in human body monitoring with Fourier transform Infrared Spectroscopy.

BACKGROUND: The metabolism of dietary fatty acids in human has been measured so far using human blood cells and stable-isotope labeled fatty acids, however, no direct data was available for human peripheral tissues and other major organs. To realize the role of dietary fatty acids in human health and diseases, it would be eager to develop convenient and suitable method to monitor fatty acid metabolism in human. RESULTS: We have developed the measurement system in situ for human lip surface lipids using the Fourier transform infrared spectroscopy (FTIR) - attenuated total reflection (ATR) detection system with special adaptor to monitor metabolic changes of lipids in human body. As human lip surface lipids may not be much affected by skin sebum constituents and may be affected directly by the lipid constituents of diet, we could detect changes of FTIR-ATR spectra, especially at 3005 to approximately 3015 cm(-1), of lip surface polyunsaturated fatty acids in a duration time-dependent manner after intake of the docosahexaenoic acid (DHA)-containing triglyceride diet. The ingested DHA appeared on the lip surface and was detected by FTIR-ATR directly and non-invasively. It was found that the metabolic rates of DHA for male volunteer subjects with age 60s were much lower than those with age 20s. Lipid hydroperoxides were found in lip lipids which were extracted from the lip surface using a mixture of ethanol/ethylpropionate/iso-octane solvents, and were the highest in the content just before noon. The changes of lipid hydroperoxides were detected also in situ with FTIR-ATR at 968 cm(-1). CONCLUSION: The measurements of lip surface lipids with FTIR-ATR technique may advance the investigation of human lipid metabolism in situ non-invasively.

A novel wire mesh "cell" for studying lipid oxidative processes by fourier transform infrared spectroscopy.

A novel infrared (IR) sample handling accessory has been developed to monitor and study oxidation processes of edible oils under moderate temperature conditions by Fourier transform infrared (FT-IR) spectroscopy. A reusable stainless steel mesh IR "cell" was designed and evaluated from the standpoint of mesh size, transmission characteristics, its ability to entrap oil, and techniques to apply sample and normalize path length so as to obtain good quality, reproducible spectra. The concept is to entrap oil within the mesh by means of its inherent surface tension and to take advantage of the high surface area provided by the mesh to facilitate rapid oxidation of the oil by air at ambient or slightly elevated temperatures without having to resort to more extreme temperature conditions to track oxidative changes in real time. Changes taking place in canola oil at room temperature, in the dark and exposed to light, as well as at 50 degrees C are presented to illustrate the performance of the cell in monitoring oxidative changes in real time (e.g., formation of hydroperoxides, loss of cis and formation of trans double bonds). The mesh cell should be useful for comparing the relative performance of antioxidants as well as evaluating the oxidative stability of oils, among other applications.

FTIR reflectance of selected minerals and their mixtures: implications for ground temperature-sensor monitoring on Mars surface environment (NASA/MSL-Rover Environmental Monitoring Station).

The Rover Environmental Monitoring Station (REMS) is one of NASA/MSL's instruments, which has been designed for measuring ambient pressure, humidity, wind speed and direction, UV radiation, and air and ground temperature (GT). The GT-sensor is dedicated to measure the real temperature of the Martian surface, integrating the IR energy coming from the ground. The existing IR spectral data of Martian dust, rocks and sediments allow for comparing the Martian spectra with the spectra of different terrestrial minerals and lithologies, and those of their alteration and weathering products. The FTIR reflectance of a set of selected astrobiologically significant minerals (including oxides, oxi/hydroxides, sulfates, chlorides, opal and clays) and basalt (as the main and most widespread volcanic Martian rock) was measured, considering different mixing amounts, and covering the specific working wavelength range of the REMS' GT-sensor. The results obtained show important percentage increases or decreases of reflectance in the entire wavelength range (e.g. basalt-hematite vs. basalt-magnetite) and specific variations limited to some spectral bands (e.g. basalt-smectite vs. basalt-jasper). The basalt reflectance percentage increases or decreases, even up to 100%, depending on the mixing of the different minerals. This unequivocally confirms the need for considering the chemical-mineralogical assemblages (and their textures) for any investigation and interpretation of Mars surface environment. Some complementary applications of this research on our planet, either in relation to the specific performances and characteristics of the GT-sensor autonomous recalibration system, or those oriented to carrying out similar studies on different types of terrestrial environmental settings, are also described.

Development of an on-site screening system for amphetamine-type stimulant tablets with a portable attenuated total reflection Fourier transform infrared spectrometer.

We tried to develop a library search system using a portable, attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectrometer for on-site identification of 3,4-methylenedioxymethamphetamine (MDMA) and 3,4-methylenedioxyamphetamine (MDA) tablets. The library consisted of the spectra from mixtures of controlled drugs (e.g. MDMA and ketamine), adulterants (e.g. caffeine), and diluents (e.g. lactose). In the seven library search algorithms, the derivative correlation coefficient showed the best discriminant capability. This was enhanced by segmentation of the search area. The optimized search algorithm was validated by the positive (n=154, e.g. the standard mixtures containing the controlled drug, and the MDMA/MDA tablets confiscated) and negative samples (n=56, e.g. medicinal tablets). All validation samples except for four were judged truly. Final criteria for positive identification were decided on the basis of the results of the validation. In conclusion, a portable ATR-FT-IR spectrometer with our library search system would be a useful tool for on-site identification of amphetamine-type stimulant tablets.

Rapid analysis of taurine in energy drinks using amino acid analyzer and Fourier transform infrared (FTIR) spectroscopy as basis for toxicological evaluation.

So-called energy drinks with very high amounts of taurine (up to 4000 mg/l are usually granted by certificates of exemption) are increasingly offered on the market. To control the currently valid maximum limits of taurine in energy drinks, a simple and rapid analytical method is required to use it routinely in food monitoring. In this article, we describe a fast and efficient analytical method (FTIR-spectroscopy) that is able to reliably characterize and quantify taurine in energy drinks. The determination of taurine in energy drinks by FTIR was compared with amino acid analyzer (ion chromatography with ninhydrin-postcolumn derivatization). During analysis of 80 energy drinks, a median concentration of 3180 mg/l was found in alcohol-free products, 314 mg/l in energy drinks with spirits, 151 mg/l in beer-containing drinks and 305 mg/l in beverages with wine. Risk analysis of these products is difficult due to the lack of valid toxicological information about taurine and its interferences with other ingredients of energy drinks (for example caffeine and alcohol). So far, the high taurine concentrations of energy drinks in comparison to the rest of the diet are scientifically doubtful, as the advertised physiological effects and the value of supplemented taurine are unproven.

Combining the tape-lift method and Fourier transform infrared spectroscopic imaging for forensic applications.

Conventional Fourier transform infrared (FT-IR) spectroscopy and microscopy have been widely used in forensic science. New opportunities exist to obtain chemical images and to enhance the spatial resolution using attenuated total reflection (ATR) FT-IR spectroscopy coupled with a focal-plane array (FPA) detector. In this paper, the sensitivity limits of FT-IR imaging using three different ATR crystals (Ge, ZnSe, and diamond) in three different optical arrangements for the detection of model particles is discussed. Model systems of ibuprofen and paracetamol particles having sizes below 32 mum were studied. The collection of drug particles was achieved with the aid of two different tapes: common adhesive tape and a film of polydimethylsiloxane (PDMS). The surface of the film with collected particles was measured directly via ATR-FT-IR imaging. Since the removal of tape from porous surfaces can be difficult, the application of micro ATR-FT-IR imaging directly to the surface of a newspaper contaminated with particles of model drugs is also discussed. In order to assess the feasibility of the chosen method in a forensic case study, the detection of diacetylmorphine hydrochloride traces in PDMS matrix and the finger surface is investigated. The scenarios considered were that of the detection of evidence collected at a crime scene with the tape lift method and the analysis of the finger of an individual after drug handling. The results show broad implications in the detection of drugs of abuse.