Sonication and heat-mediated synthesis, characterization and larvicidal activity of sericin-based silver nanoparticles against dengue vector (Aedes aegypti).

Fabrication, characterization and evaluation of the larvicidal potential of novel silk protein (sericin)-based silver nanoparticles (Se-AgNPs) were the prime motives of the designed study. Furthermore, investigation of the sericin as natural reducing or stabilizing agent was another objective behind this study. Se-AgNPs were synthesized using sonication and heat. Fabricated Se-AgNPs were characterized using particle size analyzer, UV spectrophotometry, FTIR and SEM which confirmed the fabrication of the Se-AgNPs. Size of sonication-mediated Se-AgNPs was smaller (7.49 nm) than heat-assisted Se-AgNPs (53.6 nm). Being smallest in size, sonication-assisted Se-AgNPs revealed the significantly highest (F4,10 = 39.20, p = .00) larvicidal activity against fourth instar lab and field larvae (F4,10 = 1864, p = .00) of dengue vector (Aedes aegypti) followed by heat-assisted Se-AgNPs and positive control (temephos). Non-significant larvicidal activity was showed by silver (without sericin) which made the temperature stability of silver, debatable. Furthermore, findings of biochemical assays (glutathione-S transferase, esterase, and acetylcholinesterase) showed the levels of resistance in field strain larvae. Aforementioned findings of the study suggests the sonication as the best method for synthesis of Se-AgNPs while the larvicidal activity is inversely proportional to the size of Se-AgNPs, i.e., smallest the size, highest the larvicidal activity. Conclusively, status of the sericin as a natural reducing/stabilizing agent has been endorsed by the findings of this study. RESEARCH HIGHLIGHTS: Incorporation of biocompatible and inexpensive sericin as a capping/reducing agent for synthesis of Se-AgNPs. A novel sonication method was used for the fabrication of Se-AgNPs which were thoroughly characterized by particle size analyzer, UV-visible spectrophotometry, SEM and FTIR. Analysis of enzymatic (GSTs, ESTs) levels in field and lab strains of Aedes aegypti larvae for evaluation of insecticides resistance.

Preparation and evaluation of vancomycin spray-dried powders for pulmonary delivery.

The aim of the current study was to achieve a dry powder formulation of vancomycin by spray drying whilst evaluating the effect of pH and excipient type and percentage used in formulation on particle characteristics and aerosolization performance. A D-optimal design was applied to optimize the formulation comprising vancomycin and two main excipient groups; a carbohydrate bulking agent (lactose, mannitol or trehalose) and a second excipient (hydroxypropyl beta-cyclodextrin or L-leucine) at pH 4 and 7. The physicochemical properties of particles (size, morphology, crystallinity state, residual moisture content), stability, and aerosolization characteristics were investigated. Using the combination of two excipients increased the fine particle fraction of powder emitted from an Aerolizer® device at a flow rate of 60 L/min. Hydroxypropyl beta-cyclodextrin showed more potential than L-leucine in aerosolization capabilities. Stability studies over 3 months of storage in 40 °C and 75% relative humidity suggested a good physical stability of the optimized formulation containing 17.39% hydroxypropyl beta-cyclodextrin along with 29.61% trehalose relative to the amount of drug at pH 4. Use of two excipients including trehalose and hydroxypropyl beta-cyclodextrin with a total weight ratio of 47% relative to the amount of drug is appropriate for the preparation of vancomycin dry powder formulation for inhalation.

Comparative Physicochemical Evaluation of Starch Extracted from Pearl millet seeds grown in Sudan as a Pharmaceutical Excipient against Maize and Potato Starch, using Paracetamol as a model drug.

OBJECTIVES: The aim of the current study was to compare the physicochemical and disintegrant properties of pearl millet starch with other starches using paracetamol as model drug. METHODOLOGY: Determination of percentage yield, Physicochemical, micrometrics characteristics of starch/granules, drug excipients compatibility studies and evaluation of prepared paracetamol tablets were measured using official techniques. RESULTS: The yield of the millet starch ranged from 30 to 40%. Moisture content 8.77%, pH 5.7, Swelling capacity 1.2, Hydration capacity 1.748, Moisture uptake 11.8%, Amylose 24.6%, with poor flowability and compressibility. No significant difference in hardness, friability% & disintegration times for formulations containing millet starch to that containing potato and maize starch (P>0.05). CONCLUSION: From the study, Millet seeds locally cultivated in Sudan gave a high yield of starch, has same physicochemical properties as maize and potato starch so can be used as an alternative to those starches.

Physicochemical Characterization of Grewia ferruginea Hochst. ex A. Rich Mucilage for Potential Use as a Pharmaceutical Excipient.

Gum and mucilages from natural sources are in recent times increasingly investigated for pharmaceutical applications. Different studies have shown that the gum and mucilage fraction of various species of the genus Grewia were found to be effective viscosity enhancers, stabilizers, disintegrants, suspending agents, gelling agents, bioadhesives, film coating agents, and binders. However, no study has been conducted on the potential use of Grewia ferruginea mucilage (GFM) as a pharmaceutical excipient. Therefore, this study was aimed at characterizing the Grewia ferruginea bark mucilage for its potential use as a pharmaceutical excipient. The mucilage was extracted from the Grewia ferruginea inner stem bark through aqueous extraction, precipitated with 96% ethanol, dried, and powdered. The powdered mucilage was characterized for different physicochemical properties such as powder property, loss on drying, solubility and swelling index, ash value, pH, viscosity, moisture sorption property, microbial load, and acute oral toxicity. According to the results, the percentage yield of the final dried and powdered GFM was found to be 11.96% (w/w). The density and density-related properties of the mucilage showed good powder flow property. The GFM exhibited pseudoplastic flow behavior. Moisture sorption property of GFM revealed its hygroscopic nature, and its solubility and swelling property was increased with temperature. The pH of GFM was near neutral. Microbial load of the mucilage was within the pharmacopoeial limit, and the oral acute toxicity test revealed that the mucilage is safe up to 2000 mg/kg. From the investigations of this study, it can be concluded that Grewia ferruginea bark mucilage has the potential to be utilized as an excipient in pharmaceutical formulations.

Quo Vadis qNMR?

The quantification of a drug, its impurities, and e.g. components of a mixture has become routine in NMR laboratories and many applications have been described in the literature. However, besides simply using 1D 1H or 13C NMR, a number of more advanced methods has been developed and used in the past. Here, we want to describe the applicability of nuclei beyond the classical ones 1H and 13C. Mixtures can be characterized much better by applying various chemometric methods and separating the signals of mixture components can be achieved by DOSY experiments. All these methods contribute to the platform of qNMR methods and extend the possibilities of NMR for quantification and quality evaluation of drugs, excipients, polymers, and plant extracts. However, for quantification purposes, validation is always an issue and it is necessary to think about taking NMR related measures which might be different from the ones considered for chromatographic methods.

Prevalence of ethanol and other potentially harmful excipients in pediatric oral medicines: survey of community pharmacies in a Nigerian City.

OBJECTIVE: Excipients are needed in the formulation of oral liquid medicines intended for children; they have however been reported to trigger safety issues. This study evaluated the concentrations and prevalence of ethanol and other potentially harmful excipients in pediatric formulations marketed in South Eastern Nigeria in line with international labeling guidelines and allowable daily limits (ADL). The study sampled oral pediatric formulations offered for sale in registered pharmacies. Those with accessible information leaflets were assessed for the presence and quantity of previously flagged excipients with potential to harm the pediatric population. RESULT: Of the 380 oral pediatric medicines, 140 provided access to list/quantity of ingredients. 47.9% (67) of the formulations contain at least one of the flagged excipients while the remaining only listed the active ingredients. Ethanol had the highest occurrence (62.7%) and was more in cough/cold medicines. A homeopathic cough and cold remedy had concentration of 90% v/v. Ethanol and sucrose in some formulations exhibited concentrations with a potential of crossing their approved daily intake (ADI) (1-90% v/v and 1.7 g-3.7 g/5 ml respectively). Ethanol use in studied pediatric formulations was quite high, with ethanol-containing formulations being prescribed for children 0-6 years and older. Only 26 (38.8%) completely satisfied the labelling requirements for ethanol containing formulations.

Characterization of polydisperse macrogols and macrogol-based excipients via HPLC and charged aerosol detection.

Macrogol-based emulsifiers and their respective precursor substances, i.e. macrogols (PEG), fatty acids (FA), and fatty alcohols (FAA), are widely used excipients which are usually characterized by a series of tests described within the European Pharmacopoeia (Ph. Eur.). Examples are bulk parameters such as the hydroxyl value, the peroxide value, and the determination of fatty acids composition by gas chromatography. The choice of tests depends on the emulsifier considered and its possible precursors. Though all methods are well established, most of them are time consuming and, in some cases, prone to errors and exhibit a low reproducibility. Here, an alternative and supplemental method was developed, using a HPLC-system coupled to a charged aerosol detector (CAD). Seven PEG samples, five saturated as well as two nonsaturated FA samples, and two FAA samples were analyzed. Together with these precursors, 13 macrogol-based emulsifiers of 3 different groups, i.e. macrogol ethers with FAA, macrogol esters with FA, and polysorbates, were successfully analyzed for oligomeric distribution and free precursor molecules in one run.

Dissolution and uniformity of content of tablets developed with extract of Ximenia americana L.

Herbal medicines currently represent an important part of the world pharmaceutical market, which shows growing interest in the use of herbal medicines. However, the production of such medicines involves a complex series of steps, which determine the production viability and the quality of the final product. Ximenia americana L. is a plant occurring in several regions of the world, with well-known and applied medicinal properties. Thus, the aim of this work was to develop and evaluate the physical and physical-chemical quality of tablets produced with X. americana L. extract. The extract was spray-dried from a hydroethanolic extractive solution and characterized as to its phytochemical composition. The chemical marker was determined and quantified using validated chromatographic methods. These methods indicated the presence of gallic acid at a concentration of 1.61 mg g(-1). Formulations were proposed and analyzed for their flow and compaction properties. The best formulation was used to obtain a batch of tablets, which was evaluated for its quality characteristics and showed to be within the pharmacopoeial specifications for average weight, hardness, friability, and disintegration time. The dissolution profile of the tablets produced was obtained, showing the release of about 70% of the vegetable extract content within 30 minutes. Results showed that it was possible to obtain herbal tablets containing a high content of vegetal extract by direct compression, developing a rapid process of formulation and production and guaranteeing the quality characteristics of the final product.

Evaluation of Rosin Gum and Eudragit® RS PO as a Functional Film Coating Material.

Polymers are essential tools in the research and development of new therapeutic devices. The diversity and flexibility of these materials have generated high expectations in the composition of new materials with extraordinary abilities, especially in the design of new systems for the modified release of pharmaceutically active ingredients. The natural polymer rosin features moisture protection and pH-dependent behavior (i.e., it is sensitive to pH > 7.0), suggesting its possible use in pharmaceutical systems. The synthetic polymer Eudragit® RS PO is a low-permeability material, the disintegration of which depends on the time of residence in the gastrointestinal tract. The present study developed a polymeric material with desirable physicochemical characteristics and synergistic effects that resulted from the inherent properties of the associated polymers. Isolated films were obtained by solvent evaporation and subjected to a water vapor transmission test, scanning electron microscopy, calorimetry, Fourier transform-infrared (FT-IR) spectroscopy, micro-Raman spectroscopy, and mechanical analysis. The new polymeric material was macroscopically continuous and homogeneous, was appropriately flexible, had low water permeability, was vulnerable in alkaline environments, and was thermally stable, maintaining an unchanged structure up to temperatures of ∼400°C. The new material also presented potentially suitable characteristics for application in film coatings for oral solids, suggesting that it is capable of carrying therapeutic substances to distal regions of the gastrointestinal tract. These findings indicate that this new material may be added to the list of functional excipients.

Direct and model-free detection of carbohydrate excipients in traditional Chinese medicine formula granules by ATR-FTIR microspectroscopic imaging.

A formula granule is a traditional Chinese medicine preparation made from the decoction of a single herbal medicinal. Because of the flexibility for combination and the convenience for utilization, formula granules are becoming popular in clinical applications. However, the efficacy and safety of commercial formula granules often suffer from the improper addition of carbohydrate excipients. Therefore, the detection of carbohydrate excipients is indispensable for the quality control of formula granules. FTIR spectroscopy has been used for the detection of carbohydrate excipients in formula granules. But the overlapped absorption signals limit the sensitivity and specificity of detection. Besides, a large number of multivariate calibration models are needed for quantitative determination. To overcome the above disadvantages, this research utilizes FTIR microspectroscopy for the model-free and universal detection of carbohydrate excipients in formula granules. Using ATR-FTIR imaging, excipient particles and herbal extract particles in formula granules can be measured individually, which resolves the absorption signals of excipients and herbal extract spatially and thus improves the sensitivity and specificity of detection. The content of excipients can be estimated directly from the number of excipient particles, which is robust to the variations of herb extracts and free of calibration models. The case study of Gardeniae Fructus formula granules shows the potential of FTIR microspectroscopy in the direct and rapid detection of carbohydrate excipients in formula granules. Graphical Abstract Excipient particles in TCM formula granules can be measured and recognized individually by FTIR microspectroscopy.

Physicochemical analysis in the evaluation of reconstituted dry emulsion tablets.

The aim of this study was to characterize the formation of emulsions by droplet size analysis and turbidimetry during reconstitution from a solid dosage form, namely from dry emulsion systems, which carry an oil phase for poorly soluble active ingredients. For the dry emulsion systems tablets were prepared either from oil-in-water systems using a freeze-drying process or through direct compression containing the same oil and excipients. The ratios of oil to emulgents and oil to xanthan gum were equal in both methods. In the preparation methods applied, mannitol, erythritol and lactose were used as excipients and mannitol was found to be the most effective excipient based on droplet size reconstitution, turbidimetry and physical properties. Quality control involved testing the physical properties of tablets and characterizing the reconstituted emulsions.

Analysis of low active-pharmaceutical-ingredient signal drugs based on thin layer chromatography and surface-enhanced Raman spectroscopy.

Active pharmaceutical ingredients (API) embedded in the excipients of the formula can usually be unravelled by normal Raman spectroscopy (NRS). However, more and more drugs with low API content and/or low Raman scattering coefficient were insensitive to NRS analysis, which was for the first time defined as Low API-Signal Drugs (LASIDs) in this paper. The NRS spectra of these LASIDs were similar to their dominant excipients' profiles, such as lactose, starch, microcrystalline cellulose (MCC), etc., and were classified into three types as such. 21 out of 100 kinds of drugs were screened as LASIDs and characterized further by Raman microscopic mapping. Accordingly, we proposed a tailored solution to the qualitation and quantitation problem of these LASIDs, using surface-enhanced Raman spectroscopic (SERS) detection on the thin layer chromatographic (TLC) plate both in situ and after-separation. Experimental conditions and parameters including TLC support matrix, SERS substrate, detection mode, similarity threshold, internal standard, etc., were optimized. All LASIDs were satisfactorily identified and the quantitation results agreed well with those of high performance liquid chromatography (HPLC). For some structural analogues of LASIDs, although they presented highly similar SERS spectra and were tough to distinguish even with Raman microscopic mapping, they could be successfully discriminated from each other by coupling SERS (with portable Raman spectrometer) with TLC. These results demonstrated that the proposed solution could be employed to detect the LASIDs with high accuracy and cost-effectiveness.

Development of a screening method for co-amorphous formulations of drugs and amino acids.

Using amino acids (AA) as low molecular weight excipients in the preparation of co-amorphous blends with the aim to stabilize the drug in the amorphous form have been discussed in a range of studies. However, there is currently no theoretical consensus behind which AA would be a suitable co-former for a given drug. In this work, a fast screening process to assess the co-former feasibility in co-amorphous drug-AA blends has been developed on the basis of the amorphization kinetics upon oscillatory ball milling. For this purpose, six model drugs were combined with 20 different AAs and co-milled at an equimolar ratio for different times (1, 5, 15, 30 and 60min). The degree of amorphization was then studied for the different time points by determination of the area under the curve of the diffraction peaks in X-ray powder diffraction measurements. The results of this study suggest that the choice of AA as co-formers for the formation of the co-amorphous blend could be significantly inferred after 15min of milling, since a crystallinity decrease higher than 90% after 15min resulted in successful co-amorphization in approximately 90% of the mixtures after 60min of milling. The results furthermore suggested that non-polar AAs, such as tryptophan, phenylalanine, leucine, isoleucine, methionine, valine and proline, are a good first choice in the selection of a co-former for a given drug in a co-amorphous formulation. Basic AAs appear suitable for amorphous salt formation in the case of acidic drugs. Acidic AAs however, were shown to be generally poor co-formers for co-amorphous systems.

Correlation of Phosphorus Cross-Linking to Hydration Rates in Sodium Starch Glycolate Tablet Disintegrants Using MRI.

Understanding the behavior of tablet disintegrants is valuable in the development of pharmaceutical solid dosage formulations. In this study, high-resolution magnetic resonance imaging has been used to understand the hydration behavior of a series of commercial sodium starch glycolate (SSG) samples, providing robust estimates of tablet disintegration rate that could be correlated with physicochemical properties of the SSGs, such as the extent of phosphorus (P) cross-linking as obtained from infra-red spectroscopy. Furthermore, elemental analysis together with powder X-ray diffraction has been used to quantify the presence of carboxymethyl groups and salt impurities, which also contribute to the disintegration behavior. The utility of Fast Low Angle SHot magnetic resonance imaging has been demonstrated as an approach to rapidly acquire approximations of the volume of a disintegrating tablet and, together with a robust voxel analysis routine, extract tablet disintegration rates. In this manner, a complete characterization of a series of SSG grades from different sources has been performed, showing the variability in their physicochemical properties and demonstrating a correlation between their disintegration rates and intrinsic characteristics. The insights obtained will be a valuable aid in the choice of disintegrant source as well as in managing SSG variability to ensure robustness of drug products containing SSG.

Development of pH-sensitive pectinate/alginate microspheres for colon drug delivery.

The purposes of this study were to develop and evaluate calcium pectinate/alginate microspheres (PAMs) and to exploit their pH-sensitive properties for colon-targeted delivery of encapsulated cisplatin. PAMs were prepared using an electrospraying method. The PAMs, as cores, were then coated with Eudragit S100 using a polyelectrolyte multilayer coating technique in aqueous solution. The morphology of the microspheres was observed under scanning electron microscopy. In vitro drug release studies were performed in simulated gastrointestinal fluid, and the results indicated that approximately 5 % of the cisplatin was released from the Eudragit S100-coated PAMs, and 51 % of the cisplatin was released from the uncoated PAMs at 1 h. The release of cisplatin from the Eudragit S100-coated PAMs was more sustained in simulated gastric fluid than in simulated intestinal fluid due to the increased solubility of the coating polymer in media with pH >7.0. Drug release from the Eudragit S100-coated PAMs was best described by the Higuchi's square root model. From these results, it was concluded that Eudragit S100-coated PAMs are a potential carrier for delivery of cisplatin to the colon.

Identification of phthalates in medications and dietary supplement formulations in the United States and Canada.

BACKGROUND: In animal studies, some ortho-phthalates, including di(2-ethylhexyl) phthalate (DEHP) and di-n-butyl phthalate (DBP), have been shown to be reproductive and developmental toxicants. Human studies show widespread population exposure to background levels of phthalates. Limited evidence suggests that particularly high exposure levels may result from orally ingested medicinal products containing phthalates as excipients (inactive ingredients). OBJECTIVE: In this study we aimed to identify and describe the scope of prescription (RX) and nonprescription (over-the-counter; OTC) medicinal products and dietary supplements marketed in the United States and Canada since 1995 that include phthalates as excipients. METHODS: We used lists of modified-release drug products to identify potential drug products. Inclusion of phthalates was verified using available electronic databases, print references, published package inserts, product packages, and direct communication from manufacturers. Additional products were identified using Internet searches utilizing keywords for phthalates. RESULTS: Based on labeling information, 6 RX drug products included DBP as an excipient, and 45 specified the use of diethyl phthalate (DEP). Phthalate polymers with no known toxicity--hypromellose phthalate (HMP), cellulose acetate phthalate (CAP), and polyvinyl acetate phthalate (PVAP)--were included in 75 RX products. Three OTC drug and dietary supplement products listed DBP, 64 listed DEP, and > 90 indicated inclusion of polymers. CONCLUSIONS: Numerous RX and OTC drug products and supplements from a wide range of therapeutic categories may use DBP or DEP as excipients in oral dosage forms. The potential effects of human exposure to these phthalates through medications are unknown and warrant further investigation.

Development of sucrose stearate-based nanoemulsions and optimisation through γ-cyclodextrin.

Nanoemulsions aimed at dermal drug delivery are usually stabilised by natural lecithins. However, lecithin has a high tendency towards self-aggregation and is prone to chemical degradation. Therefore, the aim of this study was to develop nanoemulsions with improved structure and long-term stability by employing a natural sucrose ester mixture as sole surfactant. A thorough comparison between the novel sucrose stearate-based nanoemulsions and corresponding lecithin-based nanoemulsions revealed that the sucrose ester is superior in terms of emulsifying efficiency, droplet formation as well as physical and chemical stability. The novel formulations exhibited a remarkably homogeneous structure in cryo TEM investigations, as opposed to the variable structure observed for lecithin-based systems. The in vitro skin permeation rates of lipophilic drugs from sucrose stearate nanoemulsions were comparable to those obtained with their lecithin-based counterparts. Furthermore, it was observed that addition of γ-cyclodextrin led to enhanced skin permeation of the steroidal drug fludrocortisone acetate from 9.99±0.46 to 55.10±3.67 µg cm(-2) after 24 h in the case of sucrose stearate-based systems and from 9.98±0.64 to 98.62±24.89 µg cm(-2) after 24 h in the case of lecithin-based systems. This enhancement effect was significantly stronger in formulations based on lecithin (P<0.05), which indicates that synergistic mechanisms between the surfactant and the cyclodextrin are involved. Cryo TEM images suggest that the cyclodextrin is incorporated into the interfacial film, which might alter drug release rates and improve the droplet microstructure.