The effect of supplementing the calcium phosphate cement containing poloxamer 407 on cellular activities.

Calcium phosphate cement (CPC) is generally used for bone repair and augmentation. Poloxamers are tri-block copolymers that are used as surfactants but have applications in drug and antibiotic delivery. However, their biological effects on bone regeneration systems remain unelucidated. Here, we aimed to understand how supplementing the prototype CPC with poloxamer would impact cellular activity and its function as a bone-grafting material. A novel CPC, modified beta-tricalcium phosphate (mß-TCP) powder, was developed through a planetary ball-milling process using a beta-tricalcium phosphate (ß-TCP). The mß-TCP dissolves rapidly and accelerates hydroxyapatite precipitation; successfully shortening the cement setting time and enhancing the strength. Furthermore, the addition of poloxamer 407 to mß-TCP could reduce the risk of leakage from bone defects and improve fracture toughness while maintaining mechanical properties. In this study, the poloxamer addition effects (0.05 and 0.1 g/mL) on the cellular activities of MC3T3-E1 cells cultured in vitro were investigated. The cell viability of mß-TCP containing poloxamer 407 was similar to that of mß-TCP. All specimens showed effective cell attachment and healthy polygonal extension of the cytoplasm firmly attached to hydroxyapatite (HA) crystals. Therefore, even with the addition of poloxamer to mß-TCP, it does not have a negative effect to osteoblast growth. These data demonstrated that the addition of poloxamer 407 to mß-TCP might be considered a potential therapeutic application for the repair and regeneration of bone defects.

Eco-friendly soil stabilization method using fish bone as cement material.

The method of soil improvement by calcium phosphate precipitation is a novel, environmentally friendly, and non-toxic technique. Such technology provides advantages over ureolytic induced calcite precipitation (UICP), the most popular and widely used method in the field of geotechnical engineering. In this paper, an investigation of the consolidation of fine and coarse sand samples by enzyme induced calcium phosphate precipitation (EICPP) was carried out. Tuna bones were used as an alternative source of calcium and phosphorus ions, as one of the most popular fish species in Japan and the main source of food industry waste. Unconfined compressive strength (UCS) of the samples after 21 days of daily injection of the solution showed an increase in strength up to 6,05 MPa in fine and up to 4,3 MPa in coarse sand samples. X-ray powder diffraction (XRD), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (SEM-EDS) analysis were performed to investigate the nature and type of deposition. Analyses confirmed that deposition is composed of brushite with needle-like crystals in the case of Toyoura sand and flower-like crystals in the case of Mikawa sand. SEM-EDS showed a presence of both, calcium, and phosphorus in the precipitate, indicating the presence of calcium phosphate compounds (CPCs). This study reveals that tuna bones are a rich source of calcium and phosphorus for EICPP, which results in a strengthening of silicate soil up to 3.4-6.05 MPa and is able to reduce ammonia emissions by 85.7 % - 97.5 % compared to UICP.

Physicochemical properties and cytocompatibility of radiation-resistant and anti-washout calcium phosphate cement by introducing artemisia sphaerocephala krasch gum.

The anti-washout ability of calcium phosphate cement (CPC) determines the effectiveness of CPC in clinical application. The γ-ray irradiation method often used in the sterilization process of CPC products is easy to degrade some commonly polymer anti-washout agent, which greatly reduces its anti-washout performance. Artemisia sphaerocephala Krasch gum (ASKG) has the potential of radiation resistance and anti-washout, but no one has considered its performance as anti-washout agent of CPC and mechanism of radiation resistance and anti-washout so far. In this study, we report the effect of γ-ray on ASKG and the effectiveness of ASKG for enhancing of radiation resistance and anti-washout ability of CPC, the physical, chemical properties and in vitro cell behaviors of ASKG-CPCs were also investigated. The results showed that addition of ASKG before and after irradiation could significantly enhanced the anti-washout performance of CPC, which is differ from conventional anti-washout agents. Meanwhile, ASKG-CPCs had an excellent injectable property and biocompatibility, and low content of irradiated ASKG could promote bone differentiation well. We anticipate that the radiation-resistant and anti-washout ASKG-CPCs have potential application prospect in orthopaedic surgery.

BMP-2 (and partially GDF-5) coating significantly accelerates and augments bone formation close to hydroxyapatite/tricalcium-phosphate/brushite implant cylinders for tibial bone defects in senile, osteopenic sheep.

Bilateral defects (diameter 8 mm) in the medial tibial head of senile, osteopenic female sheep (n = 48; 9.63 ± 0.10 years; mean ± SEM) were treated with hydroxyapatite (HA)/beta-tricalcium phosphate (ß-TCP)/dicalcium phosphate dihydrate (DCPD; brushite) cylinders coated with BMP-2 (25 or 250 micrograms) or growth differentiation factor (GDF)-5 (125 or 1250 micrograms; left side); cylinders without BMP served as controls (right side). Three, 6, and 9 months post-operation (n = 6 each group), bone structure and formation were analyzed in vivo by X-ray and ex vivo by osteodensitometry, histomorphometry, and micro-computed tomography (micro-CT) at 3 and 9 months. Semi-quantitative X-ray evaluation showed significantly increasing bone densities around all implant cylinders over time. High-dose BMP-2-coated cylinders (3 and 9 months) and low-dose GDF-5-coated cylinders (3 and 6 months) demonstrated significantly higher densities than controls (dose-dependent for BMP-2 at 3 months). This was confirmed by osteodensitometry at 9 months for high-dose BMP-2-coated cylinders (and selected GDF-5 groups), and was again dose-dependent for BMP-2. Osteoinduction by BMP-2 was most pronounced in the adjacent bone marrow (dynamic histomorphometry/micro-CT). BMP-2 (and partially GDF-5) significantly increased the bone formation in the vicinity of HA/TCP/DCPD cylinders used to fill tibial bone defects in senile osteopenic sheep and may be suitable for surgical therapy of critical size, non-load-bearing bone defects in cases of failed tibial head fracture or defect healing.

Phosphorus recovery from wastewater via calcium phosphate precipitation: A critical review of methods, progress, and insights.

Phosphorus (P) is one of the important elements for human, animal, and plant life. Due to the development of the circular economy in recent years, the recovery of P from wastewater has received more attention. Recovery of P from domestic, industrial, and agricultural wastewater in the form of calcium phosphate (CaP) by precipitation/crystallization process presents a low-cost and effective method. Recovered CaP could be used as P fertilizer and for other industrial applications. This review summarizes the effects of supersaturation, pH, seed materials, calcium (Ca) source, and wastewater composition, on the precipitation/crystallization process. The recovery efficiency and value proposition of recovered CaP were assessed. This in-depth analysis of the literature reports identified the process parameters that are worth further optimization. The review also provides perspectives on future research needs on expanding the application field of recovered CaP and finding other more economical and environmentally friendly Ca sources.

3D-printed ß-TCP/S53P4 bioactive glass scaffolds coated with tea tree oil: Coating optimization, in vitro bioactivity and antibacterial properties.

Bone infection treatment is a significant challenge for the orthopedic field. 3D printing is a promising technology to produce scaffolds with customized architecture, able to stimulate and support bone growth. ß-TCP and S53P4 bioactive glass (BG) are well-known biomaterials for scaffold manufacturing. However, a multifunctional scaffold, able to inhibit microbial proliferation at the defect site, is of increasing interest to avoid infection recurrence. Tea tree oil (TTO) has aroused interest as an antimicrobial agent to minimize the use of antibiotics. Therefore, combining the regenerative potential of a bioceramic with TTO's antimicrobial properties could result in a scaffold capable of stimulating tissue growth and treating infections. In this context, this study aimed to produce and characterize 3D-printed ß-TCP/S53P4 BG scaffolds coated with TTO. Scaffolds morphological and chemical characterizations were carried out through XDR, SEM, and FTIR analysis. ß-TCP/S53P4 BG scaffolds showed a compressive strength of ~2 MPa and 53 ± 2% of porosity. The scaffolds were coated by two different procedures, using an ethanol/TTO (EtOH/TTO) and a gelatin/TTO (Gel/TTO) solution with 5, 10, and 15% (v/v) TTO. The addition of TTO decreased MG-63 cell viability for both coating groups, but the Gel/TTO group showed higher cell viability. The antibacterial activity of the coated scaffolds was evaluated against S. aureus and higher inhibition of colony formation was found for Gel/TTO group. Therefore, the coating with Gel/TTO was effective in terms of antibacterial activity and cell viability. Such Gel/TTO coated ß-TCP/S53P4 BG scaffolds are proposed for antibacterial bone tissue engineering.

Fabrication and in vitro evaluation of 3D printed porous silicate substituted calcium phosphate scaffolds for bone tissue engineering.

Silicate-substituted calcium phosphate (Si-CaP) ceramics, alternative materials for autogenous bone grafting, exhibit excellent osteoinductivity, osteoconductivity, biocompatibility, and biodegradability; thus, they have been widely used for treating bone defects. However, the limited control over the spatial structure and weak mechanical properties of conventional Si-CaP ceramics hinder their wide application. Here, we used digital light processing (DLP) printing technology to fabricate a novel porous 3D printed Si-CaP scaffold to enhance the scaffold properties. Scanning electron microscopy, compression tests, and computational fluid dynamics simulations of the 3D printed Si-CaP scaffolds revealed a uniform spatial structure, appropriate mechanical properties, and effective interior permeability. Furthermore, compared to Si-CaP groups, 3D printed Si-CaP groups exhibited sustained release of silicon (Si), calcium (Ca), and phosphorus (P) ions. Furthermore, 3D printed Si-CaP groups had more comprehensive and persistent osteogenic effects due to increased osteogenic factor expression and calcium deposition. Our results show that the 3D printed Si-CaP scaffold successfully improved bone marrow mesenchymal stem cells (BMSCs) adhesion, proliferation, and osteogenic differentiation and possessed a distinct apatite mineralization ability. Overall, with the help of DLP printing technology, Si-CaP ceramic materials facilitate the fabrication of ideal bone tissue engineering scaffolds with essential elements, providing a promising approach for bone regeneration.

Calcium phosphate-based biomaterials trigger human macrophages to release extracellular traps.

As central part of the innate immune response, immune cells fight against invaders through various mechanisms, such as the release of extracellular traps (ETs). While this mechanism is mainly known for neutrophils in biomaterial contact, the release of macrophage extracellular traps (METs) in response to biomaterials has not yet been reported. An important application area for biomaterials is bone, where healing of defects of a critical size requires the implantation of grafts, which are often composed of calcium phosphates (CaPs). In this study, the response of human monocyte-derived macrophages in vitro to two different CaPs (α-tricalcium phosphate (α-TCP) and calcium deficient hydroxyapatite (CDHA)) as well as different pore structures was investigated. Scaffolds with anisotropic porosity were prepared by directional freezing, while samples with isotropic pore structure served as reference. It was revealed that ETs are released by human monocyte-derived macrophages in direct or indirect contact with CaP scaffolds. This was caused by mineral nanoparticles formed during incubation of α-TCP samples in culture medium supplemented with human platelet lysate, with an anisotropic pore structure attenuating MET formation. METs were significantly less pronounced or absent in association with CDHA samples. It was furthermore demonstrated that MET formation was accompanied by an increase in pro-inflammatory cytokines. Thus, this study provided the first evidence that macrophages are capable of releasing ETs in response to biomaterials.

Study on the difference of osteogenesis and Notch signaling pathway expression in biphasic calcium-phosphorus ceramic granule materials with different microstructure.

Different microstructures including micropore diameter, micropore volume, and micropore area of biphasic calcium phosphate (BCP, hydroxyapatite: ß-tricalcium phosphate = 8:2) ceramics granules were obtained by varying their sintering temperatures. Sprague-Dawley rat bone marrow-derived stem cells (BMSCs) were co-cultured with BCPs in vitro study and the BMSCs showed different degrees of proliferative activity under the influence of three materials. Cell proliferation and vitality were assessed. Three kinds of BCPs were implanted in the dorsal muscle of beagle dogs. At 1, 2, and 3 months, histological analyses were conducted to estimate the rate of osteogenesis. Expression of Notch pathway genes and osteogenic-related genes were detected by quantitative real-time polymerase chain reaction (q-rtPCR). The proportion of osteogenesis area increased to:48.75 ± 4.20%, 29.48 ± 1.55%, and 26.58 ± 3.86% at 3 months after the implantation (1050, 1150, 1250). Significant differences were observed in the upregulation of Notch pathway genes among different BCPs. BCPs with different micropore diameters have different ectopic osteogenesis effects and led to up-regulation of the Notch signaling pathway genes to different extents.

Calcium phosphate adjuvanted nanoparticles of outer membrane proteins of Salmonella Typhi as a candidate for vaccine development against Typhoid fever.

Introduction. The conventional adjuvants used in vaccines have limitations like induction of an imbalanced Th1 and Th2 immune response. To overcome this limitation, novel adjuvants and newer forms of existing adjuvants like calcium phosphate nanoparticles are being tested.Hypothesis/Gap Statement. Calcium phosphate adjuvanted outer membrane proteins vaccine may work as an efficient, safe and cost effective vaccine against Salmonella Typhi.Aim. Our goals were to evaluate the potential of calcium phosphate nanoparticles as an adjuvant using outer membrane proteins (Omps) of Salmonella Typhi as antigens for immune response, with montanide (commercially available adjuvant) as control, and its toxicity in rats.Methodology. Calcium phosphate adjuvanted outer membrane proteins nanoparticles were synthesized and characterized. The efficacy of vaccine formulation in mice and toxicity assay were carried out in rats.Results. The calcium phosphate nanoparticles varying in size between 20-50 nm had entrapment efficiency of 41.5% and loading capacity of 54%. The calcium phosphate nanoparticle-Omps vaccine formulation (nanoparticle-Omps) induced a strong humoral immune response, which was significantly higher than the control group for the entire period of study. In the montanide-Omps group the initial very high immune response declined steeply and then remained steady. The immune response induced by nanoparticle-Omps did not change appreciably. The cell mediated immune response as measured by lymphocyte proliferation assay and delayed type hypersensitivity test showed a higher response (P<0.01) for the nanoparticles-Omps group as compared to montanide-Omps group. The bacterial clearance assay also showed higher clearance in the nanoparticles-Omps group as compared to montanide-Omps group (approx 1.4%). The toxicity analysis in rats showed no difference in the values of toxicity biomarkers and blood chemistry parameters, revealing vaccine formulation was non-toxic in rats.Conclusion. Calcium phosphate nanoparticles as adjuvant in vaccines is safe, have good encapsulation and loading capacity and induce a strong cell mediated, humoral and protective immune response.

Application of a Mytilus edulis-derived promoting calcium absorption peptide in calcium phosphate cements for bone.

The IEELEEELEAER peptide (PIE) identified from the protein hydrolysate of Mytilus edulis is reported to enhance osteoblast growth and differentiation, which also possesses a superior bone formation ability both in vitro and in vivo. Moreover, PIE bound to calcium spontaneously at the stoichiometry of 1:1, and there were amino nitrogen and carboxyl oxygen atoms in 2 glutamic acid residues at the calcium-binding sites in the PIE. The PIE-calcium complex facilitated calcium uptake through the Caco-2 cell monolayers. Incorporation of PIE into calcium phosphate cements enhanced calcium ion uptake and proliferation of osteoblasts and inhibit bacteria. This study suggest that calcium phosphate cements supplemented with PIE can serve as a potentially efficient material for bone graft used during spinal surgery.

Tunable Enzyme-Assisted Mineralization of Apatitic Calcium Phosphate by Homogeneous Catalysis.

While it has long been mimicked by simple precipitation reactions under biologically relevant conditions, calcium phosphate biomineralization is a complex process, which is highly regulated by physicochemical factors and involves a variety of proteins and other biomolecules. Alkaline phosphatase (ALP), in particular, is a conductor of sorts, directly regulating the amount of orthophosphate ions available for mineralization. Herein, we explore enzyme-assisted mineralization in the homogeneous phase as a method for biomimetic mineralization and focus on how relevant ionic substitution types affect the obtained minerals. For this purpose, mineralization is performed over a range of enzyme substrate concentrations and fluoride concentrations at physiologically relevant conditions (pH 7.4, T = 37 °C). Refinement of X-ray diffraction data is used to study the crystallographic unit cell parameters for evidence of ionic substitution in the lattice, and infrared (IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) are used for complementary information regarding the chemical composition of the minerals. The results show the formation of substituted hydroxyapatite (HAP) after 48 h mineralization in all conditions. Interestingly, an expansion of the crystalline unit cell with an increasing concentration of the enzyme substrate is observed, with only slight changes in the particle morphology. On the contrary, by increasing the amount of fluoride, while keeping the enzyme substrate concentration unchanged, a contraction of the crystalline unit cell and the formation of elongated, well-crystallized rods are observed. Complementary IR and XPS data indicate that these trends are explained by the incorporation of substituted ions, namely CO32- and F-, in the HAP lattice at different positions.

Enzymatic Approach in Calcium Phosphate Biomineralization: A Contribution to Reconcile the Physicochemical with the Physiological View.

Biomineralization is the process by which organisms produce hard inorganic matter from soft tissues with outstanding control of mineral deposition in time and space. For this purpose, organisms deploy a sophisticated "toolkit" that has resulted in significant evolutionary innovations, for which calcium phosphate (CaP) is the biomineral selected for the skeleton of vertebrates. While CaP mineral formation in aqueous media can be investigated by studying thermodynamics and kinetics of phase transitions in supersaturated solutions, biogenic mineralization requires coping with the inherent complexity of biological systems. This mainly includes compartmentalization and homeostatic processes used by organisms to regulate key physiological factors, including temperature, pH and ion concentration. A detailed analysis of the literature shows the emergence of two main views describing the mechanism of CaP biomineralization. The first one, more dedicated to the study of in vivo systems and supported by researchers in physiology, often involves matrix vesicles (MVs). The second one, more investigated by the physicochemistry community, involves collagen intrafibrillar mineralization particularly through in vitro acellular models. Herein, we show that there is an obvious need in the biological systems to control both where and when the mineral forms through an in-depth survey of the mechanism of CaP mineralization. This necessity could gather both communities of physiologists and physicochemists under a common interest for an enzymatic approach to better describe CaP biomineralization. Both homogeneous and heterogeneous enzymatic catalyses are conceivable for these systems, and a few preliminary promising results on CaP mineralization for both types of enzymatic catalysis are reported in this work. Through them, we aim to describe the relevance of our point of view and the likely findings that could be obtained when adding an enzymatic approach to the already rich and creative research field dealing with CaP mineralization. This complementary approach could lead to a better understanding of the biomineralization mechanism and inspire the biomimetic design of new materials.

MCP mediated active targeting calcium phosphate hybrid nanoparticles for the treatment of orthotopic drug-resistant colon cancer.

BACKGROUND: Colon cancer is a most common malignant cancer in digestive system, and it is prone to develop resistance to the commonly used chemotherapy drugs, leading to local recurrence and metastasis. Paris saponin VII (PSVII) could not only inhibit the proliferation of colon cancer cells but also effectively induce apoptosis of drug-resistant colon cancer cells and reduce the metastasis of drug-resistant colon cancer cells as well. However, PSVII was insoluble in water and fat. It displayed no selective distribution in body and could cause severe hemolysis. Herein, colon cancer targeting calcium phosphate nanoparticles were developed to carry PSVII to treat drug-resistant colon cancer. RESULTS: PSVII carboxymethyl-ß-cyclodextrin inclusion compound was successfully encapsulated in colon cancer targeting calcium phosphate nanoparticles (PSVII@MCP-CaP) by using modified citrus pectin as stabilizer agent and colon cancer cell targeting moiety. PSVII@MCP-CaP significantly reduced the hemolysis of PSVII. Moreover, by specific accumulating in orthotopic drug-resistant colon cancer tissue, PSVII@MCP-CaP markedly inhibited the growth of orthotopic drug-resistant colon cancer in nude mice. PSVII@MCP-CaP promoted the apoptosis of drug-resistant colon cancer cells through mitochondria-mediated apoptosis pathway. Moreover, PSVII@MCP-CaP significantly inhibited the invasion and migration of drug-resistant colon cancer cells by increasing E-cadherin protein expression and reducing N-cadherin and MMP-9 protein expression. CONCLUSION: PSVII@MCP-CaP has great potential in the treatment of drug-resistant colon cancer. This study also explores a new method to prepare active targeting calcium phosphate nanoparticles loaded with a fat and water insoluble compound in water.

Sequential Application of Calcium Phosphate and ε-Polylysine Show Antibacterial and Dentin Tubule Occluding Effects In Vitro.

In this study, ε-polylysine and calcium phosphate precipitation (CPP) methods were employed to induce antibacterial effects and dentin tubule occlusion. Antibacterial effects of ε-polylysine were evaluated with broth dilution assay against P. gingivalis. CPP solution from MCPM, DCPD, and TTCP was prepared. Four concentrations of ε-polylysine(ε-PL) solutions (0.125%, 0.25%, 0.5%, 1%) were prepared. Dentin discs were prepared from recently extracted human third molars. Dentin discs were incubated with P. gingivalis (ATCC 33277) bacterial suspension (ca. 105 bacteria) containing Brain Heart Infusion medium supplemented with 0.1 g/mL Vitamin K, 0.5 mg/mL hemin, 0.4 g/mL L-cysteine in anaerobic jars (37 °C) for 7 days to allow for biofilm formation. P. g-infected dentin specimens were randomly divided into four groups: CPP + 0.125% ε-PL, CPP + 0.25% ε-PL, CPP + 0.5% ε-PL, CPP + 1% ε-PL. On each dentin specimen, CPP solution was applied followed by polylysine solution with microbrush and immersed in artificial saliva. Precipitate formation, antibacterial effects, and occlusion of dentinal tubules were characterized in vitro over up to 72 h using scanning electron microscopy. ε-PL showed 34.97% to 61.19% growth inhibition levels against P. gingivalis (P. g) after 24 h of incubation. On P. g-infected dentin specimens, DCPD + 0.25% ε-PL, and DCPD + 0.5% ε-PL groups showed complete bacterial inhibition and 78.6% and 98.1% dentin tubule occlusion, respectively (p < 0.001). The longitudinal analysis on fractured dentin samples in DCPD and TTCP groups revealed deeply penetrated hydroxyapatite-like crystal formations in dentinal tubules after 72 h of incubation in artificial saliva.

Porous Biphasic Calcium Phosphate Granules from Oyster Shell Promote the Differentiation of Induced Pluripotent Stem Cells.

Oyster shells are rich in calcium, and thus, the potential use of waste shells is in the production of calcium phosphate (CaP) minerals for osteopathic biomedical applications, such as scaffolds for bone regeneration. Implanted scaffolds should stimulate the differentiation of induced pluripotent stem cells (iPSCs) into osteoblasts. In this study, oyster shells were used to produce nano-grade hydroxyapatite (HA) powder by the liquid-phase precipitation. Then, biphasic CaP (BCP) bioceramics with two different phase ratios were obtained by the foaming of HA nanopowders and sintering by two different two-stage heat treatment processes. The different sintering conditions yielded differences in structure and morphology of the BCPs, as determined by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) surface area analysis. We then set out to determine which of these materials were most biocompatible, by co-culturing with iPSCs and examining the gene expression in molecular pathways involved in self-renewal and differentiation of iPSCs. We found that sintering for a shorter time at higher temperatures gave higher expression levels of markers for proliferation and (early) differentiation of the osteoblast. The differences in biocompatibility may be related to a more hierarchical pore structure (micropores within macropores) obtained with briefer, high-temperature sintering.

ATP stabilised and sensitised calcium phosphate nanoparticles as effective adjuvants for a DNA vaccine against cancer.

Cancer vaccines based on DNA encoding oncogenes have shown great potential in preclinical studies. However, the efficacy of DNA vaccines is limited by their weak immunogenicity because of low cellular internalisation and insufficient activation of dendritic cells (DCs). Calcium phosphate (CP) nanoparticles (NPs) are biodegradable vehicles with low toxicity and high loading capacity of DNA but suffer from stability issues. Here we employed adenosine triphosphate (ATP) as a dual functional agent, i.e. stabiliser for CP and immunological adjuvant, and applied the ATP-modified CP (ACP) NPs to the DNA vaccine. ACP NP-enhanced cellular uptake and improved transfection efficiency of DNA vaccine, and further showed the ability to activate DCs that are critical for them to prime T cells in cancer immunotherapy. As a result, a higher level of antigen-specific antibody with stronger tumour growth inhibition was achieved in mice immunised with the ACP-DNA vaccine. Overall, this one-step synthesised ACP NPs are an efficient nano-delivery system and nano-adjuvant for cancer DNA vaccines.

3D printed double-network alginate hydrogels containing polyphosphate for bioenergetics and bone regeneration.

Low mechanical strength, poor processability, and low bioactivity of hydrogels limit their application in bone tissue engineering severely. Herein, a new 3D-printable, osteoinductive, and bioenergetic-active double-network (DN) hydrogel containing sodium alginate (SA), poly (ethylene glycol) diacrylate (PEGDA), and sodium polyphosphate (PolyP) was developed via a two-step method. The synergy of the covalent cross-linking network and the ionic cross-linking network improves the mechanical properties of the hydrogel. And the pre-gel with Ca2+ has better 3D printing performance to print complex tissue engineering scaffolds than common hydrogels. In addition, the incorporation of PolyP into DN hydrogel matrix significantly improves the bioactivity of hydrogels. The bioenergetic effect of PolyP improves adenosine triphosphate content of cells significantly to promote cell activities such as migration. The in vitro osseointegration investigation suggests that the orthophosphate monomer units, which are degradation fragments of PolyP, provide enough phosphoric acid units for the formation of calcium phosphate and accelerate the osteogenic differentiation of cells greatly. Therefore, the proposed printable, bioenergetic-active, osteoinductive DN hydrogel is potential to solve the problems of complex tissue engineering scaffolds and be applied in energy-crucial bone tissue regeneration.

Colloidally Stabilized DSPE-PEG-Glucose/Calcium Phosphate Hybrid Nanocomposites for Enhanced Photodynamic Cancer Therapy via Complementary Mitochondrial Ca2+ Overload and Autophagy Inhibition.

Autophagy inhibition could hinder the underlying protective mechanisms in the course of tumor treatment. The advances in autophagy inhibition have driven focus on the functionalized nanoplatforms by combining the current treatment paradigms with complementary autophagy inhibition for enhanced efficacy. Furthermore, Ca2+ overload is also a promising adjuvant target for the tumor treatment by augmenting mitochondrial damage. In this view, complementary mitochondrial Ca2+ overload and autophagy inhibition were first demonstrated as a novel strategy suitable for homing in on the shortage of photodynamic therapy (PDT). We constructed biodegradable tumor-targeted inorganic/organic hybrid nanocomposites (DPGC/OI) synchronously encapsulating IR780 and Obatoclax by biomineralization of the nanofilm method, which consists of pH-triggered calcium phosphate (CP), long circulation phospholipid block copolymers 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE)-poly(ethylene glycol) (PEG)2000-glucose (DPG). In the presence of the hydrophilic PEG chain and glucose transporter 1 (Glut-1) ligands, DPGC would become an effectively tumor-oriented nanoplatform. Subsequently, IR780 as an outstanding photosensitizer could produce increased amounts of toxic reactive oxygen species (ROS) after laser irradiation. Calcium phosphate (CP) as the Ca2+ nanogenerator could generate Ca2+ at low pH to induce mitochondrial Ca2+ overload. The dysfunction of mitochondria could enhance increased amounts of ROS. Based on the premise that autophagy would degrade dysfunctional organelles to sustain metabolism and homeostasis, which might participate in resistance to PDT, Obatoclax as an autophagy inhibitor would hinder the protective mechanism from cancer cells with negligible toxicity. Such an enhanced PDT via mitochondrial Ca2+ overload and autophagy inhibition could be realized by DPGC/OI.

A time-course Raman spectroscopic analysis of spontaneous in vitro microcalcifications in a breast cancer cell line.

Microcalcifications are early markers of breast cancer and can provide valuable prognostic information to support clinical decision-making. Current detection of calcifications in breast tissue is based on X-ray mammography, which involves the use of ionizing radiation with potentially detrimental effects, or MRI scans, which have limited spatial resolution. Additionally, these techniques are not capable of discriminating between microcalcifications from benign and malignant lesions. Several studies show that vibrational spectroscopic techniques are capable of discriminating and classifying breast lesions, with a pathology grade based on the chemical composition of the microcalcifications. However, the occurrence of microcalcifications in the breast and the underlying mineralization process are still not fully understood. Using a previously established model of in vitro mineralization, the MDA-MB-231 human breast cancer cell line was induced using two osteogenic agents, inorganic phosphate (Pi) and ß-glycerophosphate (ßG), and direct monitoring of the mineralization process was conducted using Raman micro-spectroscopy. MDA-MB-231 cells cultured in a medium supplemented with Pi presented more rapid mineralization (by day 3) than cells exposed to ßG (by day 11). A redshift of the phosphate stretching peak for cells supplemented with ßG revealed the presence of different precursor phases (octacalcium phosphate) during apatite crystal formation. These results demonstrate that Raman micro-spectroscopy is a powerful tool for nondestructive analysis of mineral species and can provide valuable information for evaluating mineralization dynamics and any associated breast cancer progression, if utilized in pathological samples.