Structural basis for differential recognition of phosphohistidine-containing peptides by 1-pHis and 3-pHis monoclonal antibodies.

In 2015, monoclonal antibodies (mAbs) that selectively recognize the 1-pHis or 3-pHis isoforms of phosphohistidine were developed by immunizing rabbits with degenerate Ala/Gly peptides containing the nonhydrolyzable phosphohistidine (pHis) analog- phosphotriazolylalanine (pTza). Here, we report structures of five rabbit mAbs bound to cognate pTza peptides: SC1-1 and SC50-3 that recognize 1-pHis, and their 3-pHis-specific counterparts, SC39-4, SC44-8, and SC56-2. These cocrystal structures provide insights into the binding modes of the pTza phosphate group that are distinct for the 1- and 3-pHis mAbs with the selectivity arising from specific contacts with the phosphate group and triazolyl ring. The mode of phosphate recognition in the 3-pHis mAbs recapitulates the Walker A motif, as present in kinases. The complementarity-determining regions (CDRs) of four of the Fabs interact with the peptide backbone rather than peptide side chains, thus conferring sequence independence, whereas SC44-8 shows a proclivity for binding a GpHAGA motif mediated by a sterically complementary CDRL3 loop. Specific hydrogen bonding with the triazolyl ring precludes recognition of pTyr and other phosphoamino acids by these mAbs. Kinetic binding experiments reveal that the affinity of pHis mAbs for pHis and pTza peptides is submicromolar. Bound pHis mAbs also shield the pHis peptides from rapid dephosphorylation. The epitope-paratope interactions illustrate how these anti-pHis antibodies are useful for a wide range of research techniques and this structural information can be utilized to improve the specificity and affinity of these antibodies toward a variety of pHis substrates to understand the role of histidine phosphorylation in healthy and diseased states.

Generation and testing of engineered multimeric Fabs of trastuzumab.

Recombinant antibodies fragments in several new formats are routinely investigated and used in diagnostic and therapeutic applications as anti-cancers molecules. New antibody formats are generated to compensate the need for multispecificity and site-specific introduction of fluorescent dyes, cytotoxic payloads or for generating semisynthetic multimeric molecules. Fabs of trastuzumab bearing transglutaminase (MTG) reactive sites were generated by periplasmic expression in E. coli and purified. Multimeric Fabs were generated by either disulfide bridge formation or by using MTG-sensitive peptide linkers. Binding to receptor was assessed by ELISA and SPR methods. Internalization and growth inhibition assays were performed on BT-474 and SKBR3 Her2+ cells. Fabs were successfully produced and dimerized or trimerized using MTG and suitably designed peptide linkers. Site-specific derivatizations with fluorophores were similarly achieved. The monomeric, dimeric and trimeric variants bind the receptor with affinities similar or superior to the full antibody. Fab and Fab2 are rapidly internalized in Her2+ cells and exhibit growth inhibition abilities similar to the full antibody. Altogether, the data show that the recombinant Fabs can be produced in E. coli and converted into multimeric variants by MTG-based bioconjugation. Similar approaches are extendable to the introduction of cytotoxic payloads for the generation of novel Antibody Drug Conjugates.

High-Throughput Generation of Bipod (Fab × scFv) Bispecific Antibodies Exploits Differential Chain Expression and Affinity Capture.

Generation of bispecific antibodies (BsAbs) having two unique Fab domains requires heterodimerization of the two heavy chains and pairing of each heavy chain with its cognate light chain. An alternative bispecific scaffold (Bipod) comprising an scFv and a Fab on a heterodimeric Fc eliminates the possibility of light chain mispairing. However, unpredictable levels of chain expression and scFv-induced aggregation can complicate purification and reduce the yield of desired Bipod. Here, we describe a high-throughput method for generation of Bipods based on protein A and CH1 domain affinity capture. This method exploits over-expression of the scFv chain to maximize heterodimer yield. Bipods purified by this method have purity suitable for cell-based functional assays and in vivo studies.

Identification and characterization of an octameric PEG-protein conjugate system for intravitreal long-acting delivery to the back of the eye.

Innovative protein engineering and chemical conjugation technologies have yielded an impressive number of drug candidates in clinical development including >80 antibody drug conjugates, >60 bispecific antibodies, >35 Fc-fusion proteins and >10 immuno-cytokines. Despite these innovations, technological advances are needed to address unmet medical needs with new pharmacological mechanisms. Age-related eye diseases are among the most common causes of blindness and poor vision in the world. Many such diseases affect the back of the eye, where the inaccessibility of the site of action necessitates therapeutic delivery via intravitreal (IVT) injection. Treatments administered via this route typically have vitreal half-lives <10 days in humans, requiring frequent administration. Since IVT injection is burdensome to patients, there exists a strong need to develop therapeutics with prolonged residence time in the eye. We report here a strategy to increase retention of a therapeutic fragment antibody (Fab) in the eye, using an anti-complement factor D Fab previously optimized for ocular delivery. Polyethylene glycol structures, varying in length, geometry and degree of branching, were coupled to the Fab via maleimide-activated termini. A screening strategy was developed to allow for key determinants of ocular half-life to be measured in vitro. After compound selection, a scalable process was established to enable tolerability and pharmacokinetic studies in cynomolgus monkeys, demonstrating an increase in vitreal half-life with no associated adverse events. Further, we show that the technique for compound selection, analytical characterization, and scalable production is general for a range of antibody fragments. The application of the technology has broad impact in across many therapeutic areas with the first major advancement in the treatment of an important ocular disease.

Human Serum Albumin-Based Drug-Free Macromolecular Therapeutics: Apoptosis Induction by Coiled-Coil-Mediated Cross-Linking of CD20 Antigens on Lymphoma B Cell Surface.

A therapeutic platform-drug-free macromolecular therapeutics (DFMT)-that induces apoptosis in B cells by cross-linking of CD20 receptors, without the need for low molecular weight cytotoxic drug, is developed. In this report, a DFMT system is synthesized and evaluated based on human serum albumin (HSA) and two complementary coiled-coil forming peptides, CCE and CCK. Fab' fragment of anti-CD20 monoclonal antibody rituximab is attached to CCE (Fab'-CCE); multiple grafts of CCK are conjugated to HSA (HSA-(CCK)7 ). The colocalization of both nanoconjugates at the surface of non-Hodgkin's lymphoma (NHL) Raji cells is demonstrated by confocal fluorescence microscopy. The colocalization leads to coiled-coil formation, CD20 cross-linking, and apoptosis induction. The apoptotic levels are evaluated by Annexin V, Caspase 3, and terminal deoxynucleotidyl transferase dUTP nick end labeling assays. Selective surface binding of DFMT to CD20+ cells is validated in experiments on a coculture of CD20+ (Raji) and CD20-(DG-75) cells. It is found that DFMT can trigger calcium influx only in Raji cells, but not in DG-75 cells. A highly specific treatment for NHL and other B cell malignancies with considerable translational potential is presented by HSA-based DFMT system.

Data-independent oxonium ion profiling of multi-glycosylated biotherapeutics.

The characterization of glycosylation is required for many protein therapeutics. The emergence of antibody and antibody-like molecules with multiple glycan attachment sites has rendered glycan analysis increasingly more complicated. Reliance on site-specific glycopeptide analysis is therefore necessary to fully analyze multi-glycosylated biotherapeutics. Established glycopeptide methodologies have generally utilized a priori knowledge of the glycosylation states of the investigated protein(s), database searching of results generated from data-dependent liquid chromatography-tandem mass spectrometry workflows, and extracted ion quantitation of the individual identified species. However, the inherent complexity of glycosylation makes predicting all glycoforms on all glycosylation sites extremely challenging, if not impossible. That is, only the "knowns" are assessed. Here, we describe an agnostic methodology to qualitatively and quantitatively assess both "known" and "unknown" site-specific glycosylation for biotherapeutics that contain multiple glycosylation sites. The workflow uses data-independent, all ion fragmentation to generate glycan oxonium ions, which are then extracted across the entirety of the chromatographic timeline to produce a glycan-specific "fingerprint" of the glycoprotein sample. We utilized both HexNAc and sialic acid oxonium ion profiles to quickly assess the presence of Fab glycosylation in a therapeutic monoclonal antibody, as well as for high-throughput comparisons of multi-glycosylated protein drugs derived from different clones to a reference product. An automated method was created to rapidly assess oxonium profiles between samples, and to provide a quantitative assessment of similarity.

Trastuzumab- and Fab' fragment-modified curcumin PEG-PLGA nanoparticles: preparation and evaluation in vitro and in vivo.

INTRODUCTION: Nanoparticles (NPs) modified with bio-ligands represent a promising strategy for active targeted drug delivery to tumour. However, many targeted ligands, such as trastuzumab (TMAB), have high molecular weight, limiting their application for targeting. In this study, we prepared Fab' (antigen-binding fragments cut from TMAB)-modified NPs (Fab'-NPs) with curcumin (Cur) as a model drug for more effective targeting of human epidermal growth factor receptor 2 (HER2/ErbB2/Neu), which is overexpressed on breast cancer cells. MATERIAL AND METHODS: The release kinetics was conducted by dialysis bags. The ability to kill HER2-overexpressing BT-474 cells of Fab'-Cur-NPs compared with TMAB-Cur-NPs was conducted by cytotoxicity experiments. Qualitative and quantitative cell uptake studies using coumarin-6 (fluorescent probe)-loaded NPs were performed by fluorescence microscopy and flow cytometry. Pharmacokinetics and biodistribution experiments in vivo were assessed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). RESULTS: The release kinetics showed that both Fab'-Cur-NPs and TMAB-Cur-NPs provided continuous, slow release of curcumin for 72 h, with no significant difference. In vitro cytotoxicity experiments showed that Fab'-Cur-NPs manifested prominent ability to kill HER2-overexpressing BT-474 cells compared with TMAB-Cur-NPs. Qualitative and quantitative cell uptake studies indicated that the accumulation of Fab'-NPs was greater than that of TMAB-NPs in BT-474 (HER2+) cells; However, there was no significant difference in MDA-MB-231 (HER2-) cells. Pharmacokinetics and biodistribution experiments in vivo demonstrated that the half-life (t1/2) and area under the blood concentration-time curve (AUC0-t) of Fab'-Cur-NPs increased 5.30-fold and 1.76-fold relative to those of TMAB-Cur-NPs, respectively. Furthermore, the tumor accumulation of Fab'-Cur-NPs was higher than that of TMAB-Cur-NPs. CONCLUSION: Fab' fragment has greater capacity than the intact antibody to achieve tumor targeting through NP-based delivery.

Combining somatic mutations present in different in vivo affinity-matured antibodies isolated from immunized Lama glama yields ultra-potent antibody therapeutics.

Highly potent human antibodies are required to therapeutically neutralize cytokines such as interleukin-6 (IL-6) that is involved in many inflammatory diseases and malignancies. Although a number of mutagenesis approaches exist to perform antibody affinity maturation, these may cause antibody instability and production issues. Thus, a robust and easy antibody affinity maturation strategy to increase antibody potency remains highly desirable. By immunizing llama, cloning the 'immune' antibody repertoire and using phage display, we selected a diverse set of IL-6 antagonistic Fabs. Heavy chain shuffling was performed on the Fab with lowest off-rate, resulting in a panel of variants with even lower off-rate. Structural analysis of the Fab:IL-6 complex suggests that the increased affinity was partly due to a serine to tyrosine switch in HCDR2. This translated into neutralizing capacity in an in vivo model of IL-6 induced SAA production. Finally, a novel Fab library was designed, encoding all variations found in the natural repertoire of VH genes identified after heavy chain shuffling. High stringency selections resulted in identification of a Fab with 250-fold increased potency when re-formatted into IgG1. Compared with a heavily engineered anti-IL-6 monoclonal antibody currently in clinical development, this IgG was at least equally potent, showing the engineering process to have had led to a highly potent anti-IL-6 antibody.

Preparation of Quenchbodies by protein transamination reaction.

Quenchbody (Q-body) is an antibody fragment labeled with fluorescent dye(s), which functions as a biosensor via the antigen-dependent removal of the quenching effect on fluorophores. It is based on the principle that the fluorescence of the dye(s) attached to the antibody N-terminal region is quenched primarily by the tryptophan residues present in the variable regions, and this quenching is released when the antigen binds to the antibody, resulting in increased fluorescence intensity. Hence Q-body is utilized in various immunoassays for the rapid and sensitive detection of analytes. So far, Q-bodies have been prepared by using a cell-free translation system or by combining Escherichia coli expression and post-labeling steps. However, the above methods need antibody gene cloning, and are time-consuming. In this study, we report a novel approach to prepare Q-bodies by protein N-terminal transamination. We used the antigen-binding fragment (Fab) of an antibody against the bone-Gla-protein (BGP), a biomarker for bone diseases, which was expressed in E. coli. The purified Fab was treated with Rapoport's salt to convert the amino group at the N-terminus to a ketone group, which in turn was allowed to react with fluorescent probes that have aminooxy or hydrazide groups, to prepare a Q-body. The Q-body prepared by this method could detect the BGP-C7 antigen at concentrations as low as 10 nM. Since the approach can label the protein N-terminus directly, it could be applied for preparing Q-bodies from natural antibodies and for the rapid screening of high-performance Q-bodies.

Molecular characterization of monoclonal antibodies that inhibit acetylcholinesterase by targeting the peripheral site and backdoor region.

The inhibition properties and target sites of monoclonal antibodies (mAbs) Elec403, Elec408 and Elec410, generated against Electrophorus electricus acetylcholinesterase (AChE), have been defined previously using biochemical and mutagenesis approaches. Elec403 and Elec410, which bind competitively with each other and with the peptidic toxin inhibitor fasciculin, are directed toward distinctive albeit overlapping epitopes located at the AChE peripheral anionic site, which surrounds the entrance of the active site gorge. Elec408, which is not competitive with the other two mAbs nor fasciculin, targets a second epitope located in the backdoor region, distant from the gorge entrance. To characterize the molecular determinants dictating their binding site specificity, we cloned and sequenced the mAbs; generated antigen-binding fragments (Fab) retaining the parental inhibition properties; and explored their structure-function relationships using complementary x-ray crystallography, homology modeling and flexible docking approaches. Hypermutation of one Elec403 complementarity-determining region suggests occurrence of antigen-driven selection towards recognition of the AChE peripheral site. Comparative analysis of the 1.9Å-resolution structure of Fab408 and of theoretical models of its Fab403 and Fab410 congeners evidences distinctive surface topographies and anisotropic repartitions of charges, consistent with their respective target sites and inhibition properties. Finally, a validated, data-driven docking model of the Fab403-AChE complex suggests a mode of binding at the PAS that fully correlates with the functional data. This comprehensive study documents the molecular peculiarities of Fab403 and Fab410, as the largest peptidic inhibitors directed towards the peripheral site, and those of Fab408, as the first inhibitor directed toward the backdoor region of an AChE and a unique template for the design of new, specific modulators of AChE catalysis.

Macromolecular scaffolds for immobilizing small molecule microarrays in label-free detection of protein-ligand interactions on solid support.

We explored two macromolecular scaffolds, bovine serum albumin (BSA) and polyvinyl alcohol (PVA), as chemically complementary platforms for immobilizing small molecule compounds on functionalized glass slides. We conjugated biotin molecules to BSA and amine-derivatized PVA and subsequently immobilized the conjugates on epoxy-functionalized glass slides through reaction of free amine residues on BSA and PVA with surface-bound epoxy groups. We studied binding reactions of such immobilized small molecule targets with solution-phase protein probes using an oblique-incidence reflectivity difference scanning optical microscope. The results showed that both BSA and amine-derivatized PVA were effective and efficient as carriers of small molecules with NHS residues and fluoric residues and for immobilization on epoxy-coated solid surfaces. A significant fraction of the conjugated small molecules retain their innate chemical activity.

Amperometric immunosensor for detection of celiac disease toxic gliadin based on Fab fragments.

Immunosensor sensitivity is strongly dependent on the density of free active epitopes per surface area, which could be achieved via well-oriented immobilization of antibody fragments as bioreceptor molecules. Here, we report on the development of an electrochemical gliadin immunosensor based on the spontaneous self-assembly of antigliadin Fab fragments (CDC5-Fab) on Au surfaces. The analytical performance of this immunosensor is compared with a similar containing whole CDC5 antibodies previously modified with thiol groups (CDC5-SH) as the recognition element. Fab fragments were generated by reduction of the disulfide bond of F(ab)(2) fragments obtained by bromelain digestion of CDC5 antibody. Surface plasmon resonance (SPR) was used to evaluate the degree of immobilization and recognition ability of immobilized CDC5-Fab and CDC5-SH on gold surfaces. The studied surface chemistries were evaluated in terms of time required for SAM formation, stability, susceptibility to nonspecific interactions, and sensitivity using surface plasmon resonance, electrochemical impedance spectroscopy (EIS), and amperometry. CDC5-Fab formed a stable monolayer on gold after 15 min and retained >90% of antigen recognition ability after 2 months of storage at 4 degrees C. Detection of gliadin of Fab modified electrodes was evaluated by impedance and amperometry. Labeless impedimetric detection achieved a LOD of 0.42 microg/mL while the amperometric immunosensor based on Fab fragments showed a highly sensitive response with an LOD of 3.29 ng/mL. The Fab based immunosensor offers the advantages of being highly sensitive, easy, and rapid to prepare, with a low assay time.

Effect of Indian Ayurvedic medicine Ashwagandha on measurement of serum digoxin and 11 commonly monitored drugs using immunoassays: study of protein binding and interaction with Digibind.

CONTEXT: Ashwagandha, a popular Ayurvedic medicine, is now available in the United States. Alkaloids found in this herb have structural similarity with digoxin. OBJECTIVE: To study potential interference of Ashwagandha with serum digoxin measurement by immunoassays. Potential interference was also investigated with immunoassays for 11 other commonly monitored drugs. In addition, interaction of components of Ashwagandha with the Fab fragment of antidigoxin antibody (Digibind) was investigated. DESIGN: Two different brands of liquid extract and 1 dry powdered form of Ashwagandha were used for this investigation. Aliquots of drug-free serum were supplemented with various concentrations of Ashwagandha and apparent digoxin concentrations were measured by 3 digoxin immunoassays. Mice were fed with Ashwagandha and apparent digoxin concentrations were measured 1 and 3 hours after feeding. Potential interference of Ashwagandha with immunoassays of 11 other drugs was also investigated. Interaction of components of Ashwagandha with Digibind was studied in vitro. RESULTS: Significant apparent digoxin concentrations were observed both in vitro and in vivo using the fluorescence polarization immunoassay of digoxin, whereas the Beckman and the microparticle enzyme immunoassay digoxin assay demonstrated minimal interference. Immunoassays of 11 other drugs tested were unaffected. When Ashwagandha extract was added to a serum pool containing digoxin, falsely elevated digoxin value was observed with fluorescence polarization immunoassay, but values were falsely lowered when measured by the microparticle enzyme immunoassay. Digibind neutralized digoxin-like immunoreactive components of Ashwagandha in vitro. CONCLUSIONS: Components of Ashwagandha interfered with serum digoxin measurements using immunoassays. Digibind neutralized free digoxin-like immunoreactive components of Ashwagandha.

The use of immunoliposome for nutrient target regulation (a review).

Although research on the role of genetically engineered antibodies and liposomes in the immunology or the nutrition field is extensive, there is no case for immunoliposome to nutrient target regulation. It is known that liposomes are spherical particles that encapsulate a fraction of the solvent, in which they freely diffuse (float) into their interior. Therefore, identification of immunoliposomes in hypothalamic site or intestinal epithelial cells that are differentially regulated by liposomes encapsulating nutrients or drugs will be an important step toward understanding the role of immunoliposomes in nutrition regulation progression and ingredient stability. Consequently, a useful model (immunoliposomal nutrient delivery system, ILNDS) of nutrient target regulation via immunoliposomes is designed to regulate the endocrine system effectively. This review focuses on antibody libraries' construction, display and selection, a brief introduction of immunoliposome, and how to use ILNDS for nutrient target regulation.

Hydrophobic interactions are the prevalent force in bromelain:Fab' complex.

Antibromelain polyclonal antibodies against stem bromelain were raised in male albino rabbits and the Fab monomers isolated from the IgG of the immune sera as reported in our earlier communication (Gupta, P., Khan, R. H., and Saleemuddin, M. (2003) Biochim. Biophys. Acta, 1646, 131-135). Further, as evident from that communication bromelain:Fab complex has 1 : 1 stoichiometry. The stability of bromelain:Fab complex (1 : 1 stoichiometry) was investigated by far and near-UV CD and fluorescence measurements. Addition of up to 1.8 M NaCl caused no significant changes in fluorescence signals and near-UV CD peak pattern. However, the spectral studies together with gel filtration studies suggest dissociation of the complex beyond 5% (v/v) methanol. These results show that hydrophobic interactions play a pronounced role in the binding of Fab to bromelain while electrostatic interactions may be less crucial.

Antibodies with infinite affinity.

Here we report an approach to the design and production of antibody/ligand pairs, to achieve functional affinity far greater than avidin/biotin. Using fundamental chemical principles, we have developed antibody/ligand pairs that retain the binding specificity of the antibody, but do not dissociate. Choosing a structurally characterized antibody/ligand pair as an example, we engineered complementary reactive groups in the antibody binding pocket and the ligand, so that they would be in close proximity in the antibody/ligand complex. Cross-reactions with other molecules in the medium are averted because of the low reactivity of these groups; however, in the antibody/ligand complex the effective local concentrations of the complementary reactive groups are very large, allowing a covalent reaction to link the two together. By eliminating the dissociation of the ligand from the antibody, we have made the affinity functionally infinite. This chemical manipulation of affinity is applicable to other biological binding pairs.

A human monoclonal IgE antibody defines a highly allergenic fragment of the major timothy grass pollen allergen, Phl p 5: molecular, immunological, and structural characterization of the epitope-containing domain.

Almost 90% of grass pollen-allergic patients are sensitized against group 5 grass pollen allergens. We isolated a monoclonal human IgE Fab out of a combinatorial library prepared from lymphocytes of a grass pollen-allergic patient and studied its interaction with group 5 allergens. The IgE Fab cross-reacted with group 5A isoallergens from several grass and corn species. By allergen gene fragmentation we mapped the binding site of the IgE Fab to a 11.2-kDa N-terminal fragment of the major timothy grass pollen allergen Phl p 5A. The IgE Fab-defined Phl p 5A fragment was expressed in Escherichia coli and purified to homogeneity. Circular dichroism analysis revealed that the rPhl p 5A domain, as well as complete rPhl p 5A, assumed a folded conformation consisting predominantly of an alpha helical secondary structure, and exhibited a remarkable refolding capacity. It reacted with serum IgE from 76% of grass pollen-allergic patients and revealed an extremely high allergenic activity in basophil histamine release as well as skin test experiments. Thus, the rPhl p 5A domain represents an important allergen domain containing several IgE epitopes in a configuration optimal for efficient effector cell activation. We suggest the rPhl p 5A fragment and the corresponding IgE Fab as paradigmatic tools to explore the structural requirements for highly efficient effector cell activation and, perhaps later, for the development of generally applicable allergen-specific therapy strategies.

Measurement of protein interaction bioenergetics: application to structural variants of anti-sCD4 antibody.

This chapter has described a bioenergetic analysis of the interaction of sCD4 with an IgG1 and two IgG4 derivatives of an anti-sCD4 MAb. The MAbs have identical VH and VL domains but differ markedly in their CH and CL domains, raising the question of whether their antigen-binding chemistries are altered. We find the sCD4-binding kinetics and thermodynamics of the MAbs are indistinguishable, which indicates rigorously that the molecular details of the binding interactions are the same. We also showed the importance of using multiple biophysical methods to define the binding model before the bioenergetics can be appropriately interpreted. Analysis of the binding thermodynamics and kinetics suggests conformational changes that might be coupled to sCD4 binding by these MAbs are small or absent.

Dominant epitopes and allergic cross-reactivity: complex formation between a Fab fragment of a monoclonal murine IgG antibody and the major allergen from birch pollen Bet v 1.

The symptoms characteristic of allergic hypersensitivity are caused by the release of mediators, i.e., histamine, from effector cells such as basophils and mast cells. Allergens with more than one B cell epitope cross-link IgE Abs bound to high affinity FcepsilonRI receptors on mast cell surfaces leading to aggregation and subsequent mediator release. Thus, allergen-Ab complexes play a crucial role in the cascade leading to the allergic response. We here report the structure of a 1:1 complex between the major birch pollen allergen Bet v 1 and the Fab fragment from a murine monoclonal IgG1 Ab, BV16, that has been solved to 2.9 A resolution by x-ray diffraction. The mAb is shown to inhibit the binding of allergic patients' IgE to Bet v 1, and the allergen-IgG complex may therefore serve as a model for the study of allergen-IgE interactions relevant in allergy. The size of the BV16 epitope is 931 A2 as defined by the Bet v 1 Ab interaction surface. Molecular interactions predicted to occur in the interface are likewise in agreement with earlier observations on Ag-Ab complexes. The epitope is formed by amino acids that are conserved among major allergens from related species within the Fagales order. In combination with a surprisingly high inhibitory capacity of BV16 with respect to allergic patients' serum IgE binding to Bet v 1, these observations provide experimental support for the proposal of dominant IgE epitopes located in the conserved surface areas. This model will facilitate the development of new and safer vaccines for allergen immunotherapy in the form of mutated allergens.