Biofilter treatment of gas phase ß-caryophyllene at an elevated temperature.

Experiments were carried out to test the capacity for a laboratory-scale biofilter operated at an elevated temperature level (∼50°C) to remove an air stream containing ß-caryophyllene, a naturally occurring sesquiterpene of environmental concern emitted from wood-related industrial facilities. A water jacket was used to maintain high temperatures in a laboratory-scale biofilter. Inocula, pollutant loading and nutrient supply rate effects were evaluated over 84 days of biofilter operation. The start-up process took over two months when citrus peels were used as inocula while a relatively short start-up period was achieved after introducing forest compost products. While using a sparged-gas bioreactor to cultivate an enrichment culture for 97 days, removal efficiencies in excess of 80% were observed after 18 days. At empty bed contact times of 50 s and at a pollutant loading rate of 3.05 mg C/L/hr, removal efficiency levels reached 90% and the elimination capacity level reached 2.29 mg C/L/hr, corresponding to an elimination capacity of 2.60 mg ß-caryophyllene/L/hr. Collectively, these results demonstrate that ß-caryophyllene can be successfully removed from contaminated air using a biofilter operated at a high temperature (∼50°C), expanding the temperature range within which biofilters are known to biodegrade sesquiterpenes.

Removal of non-aqueous phase liquids (NAPLs) from TPH-saturated sandy aquifer sediments using in situ air sparging combined with soil vapor extraction.

Contamination in coastal aquifer plains is of great concern in many countries given that non-aqueous phase liquids (NAPLs) have polluted numerous sites through accidental oil spills or improper disposal. We have developed a method to remove pollutants such as NAPLs from sandy sediment samples collected from the Mandol area of Gomso Bay in western South Korea. The sediments were collected from around the diffuser in a two-dimensional (2D) acrylic reaction apparatus, and these contained a total petroleum hydrocarbon (TPH) concentration of 89.3 ppm (mg/kg media). The maximum perchloroethylene (PCE) concentration was 398.51 ppm in the unsaturated zone and 0.77 ppm in the saturated zone. Volatile organic compounds (VOCs) were detected between 20 and 44 hour. However, non-volatile contaminants remained in the sediments after treatment. In situ air sparging (IAS) combined with soil vapor extraction (SVE), transformation from sorbed and nonaqueous phases to the vapor phase, is incomplete when treatment is performed using a pervasive air flow for sediments such as the sand of Mandol. During air transformation, the groundwater flow conditions increased the rate of contaminant removal. Although pilot-scale testing in the field site was fluctuated due to the heterogeneous of sediments condition, this 2D study found that the proposed method can alter the measurable geophysical properties of NAPLs. These findings demonstrate that IAS combined with SVE in the saturated zone is an effective technology for aquifer remediation high applicability of sandy coastal sediments contaminated by NAPLs.

Adsorption behavior of 2, 3, 7, 8-tetrachlorodibenzo-p-dioxin on pristine and doped black phosphorene: A DFT study.

Polychlorinated dibenzo-p-dioxins (PCDDs) are highly toxic to humans. The search for novel and effective methods and materials for detecting or removing these gas pollutants is becoming more important and urgent. With its high specific surface area, abundance, and variety of potential applications, phosphorene has attracted much research interest. In this study, density functional theory was used to study the interactions between a doped phosphorene sheet and a tetrachlorodibenzo-p-dioxin (TCDD) molecule. The initial configurations of the TCDD and metallic (Ca or Ti) or nonmetallic (S and Se) dopants were investigated during the TCDD-phosphorene interaction study. Adsorption energy, isosurface of electron density difference, and density of states analysis were utilized to explore the interactions between TCDD and phosphorene. The results indicated that Ca dopant effectively improved the interaction between TCDD and phosphorene. Se dopant reduced the interaction between TCDD and phosphorene. Combining interactions between TCDD and the pristine, Ca-doped, and Se-doped phosphorenes, phosphorene could be a promising candidate for TCDD sensing and removal.

Bridging the gap between gas and liquid chromatography.

The rapid and complete baseline separation of both volatile (C5 to C16 alkanes in gasoline or terpenes in plant extracts) and non-volatile (>C20 alkanes) organic compounds was achieved by combining (1) low-density fluid chromatography (LDFC) using carbon dioxide at elevated temperature (>90°C) and low pressure (1500psi) designed to increase the retention of the most volatile compounds and (2) high-vacuum technology (<10-4Torr) in order to preserve the maximum efficiency of short analytical columns (3.0mm×150mm packed with 1.8µm fully porous HSS-SB-C18 particles) when used in LDFC. The volatile compounds are eluted first under isobaric conditions (1500psi) in less than a minute followed by a linear gradient of the column back pressure (from 1500 to 3500psi in 5min) for the elution of the non-volatile compounds up to C40. The experimental results demonstrate that LDFC performed with short 3.0mm i.d. columns packed with sub-2µm particles and placed under adiabatic conditions enables the analysts to deliver a single, fast, and high-resolution separation of both volatile and non-volatile compounds.

In situ vadose zone bioremediation.

Contamination of the vadose zone with various pollutants is a world-wide problem, and often technical or economic constraints impose remediation without excavation. In situ bioremediation in the vadose zone by bioventing has become a standard remediation technology for light spilled petroleum products. In this review, focus is given on new in situ bioremediation strategies in the vadose zone targeting a variety of other pollutants such as perchlorate, nitrate, uranium, chromium, halogenated solvents, explosives and pesticides. The techniques for biostimulation of either oxidative or reductive degradation pathways are presented, and biotransformations to immobile pollutants are discussed in cases of non-degradable pollutants. Furthermore, research on natural attenuation in the vadose zone is presented.

Co-precipitation of radium with barium and strontium sulfate and its impact on the fate of radium during treatment of produced water from unconventional gas extraction.

Radium occurs in flowback and produced waters from hydraulic fracturing for unconventional gas extraction along with high concentrations of barium and strontium and elevated salinity. Radium is often removed from this wastewater by co-precipitation with barium or other alkaline earth metals. The distribution equation for Ra in the precipitate is derived from the equilibrium of the lattice replacement reaction (inclusion) between the Ra(2+) ion and the carrier ions (e.g., Ba(2+) and Sr(2+)) in aqueous and solid phases and is often applied to describe the fate of radium in these systems. Although the theoretical distribution coefficient for Ra-SrSO4 (Kd = 237) is much larger than that for Ra-BaSO4 (Kd = 1.54), previous studies have focused on Ra-BaSO4 equilibrium. This study evaluates the equilibria and kinetics of co-precipitation reactions in Ra-Ba-SO4 and Ra-Sr-SO4 binary systems and the Ra-Ba-Sr-SO4 ternary system under varying ionic strength (IS) conditions that are representative of brines generated during unconventional gas extraction. Results show that radium removal generally follows the theoretical distribution law in binary systems and is enhanced in the Ra-Ba-SO4 system and restrained in the Ra-Sr-SO4 system by high IS. However, the experimental distribution coefficient (Kd') varies widely and cannot be accurately described by the distribution equation, which depends on IS, kinetics of carrier precipitation and does not account for radium removal by adsorption. Radium removal in the ternary system is controlled by the co-precipitation of Ra-Ba-SO4, which is attributed to the rapid BaSO4 nucleation rate and closer ionic radii of Ra(2+) with Ba(2+) than with Sr(2+). Carrier (i.e., barite) recycling during water treatment was shown to be effective in enhancing radium removal even after co-precipitation was completed. Calculations based on experimental results show that Ra levels in the precipitate generated in centralized waste treatment facilities far exceed regulatory limits for disposal in municipal sanitary landfills and require careful monitoring of allowed source term loading (ASTL) for technically enhanced naturally occurring materials (TENORM) in these landfills. Several alternatives for sustainable management of TENORM are discussed.

Experimental investigation on gaseous emissions from the combustion of date palm residues in laboratory scale furnace.

Emissions characteristics from the combustion of five date palm residues, DPR, (Date Palm Leaflets, Date Palm Rachis, Date Palm Trunk, Date Stones and fruitstalk prunings) in a laboratory scale furnace were investigated. Release of gaseous products such as CO2, CO, VOC, NOx and SO2 were measured at 600-800°C. The main goal was to analyze thermal behaviors and gaseous emissions in order to select the most convenient biofuel for an application in domestic boiler installations. Regards to biofuel characteristics, date stone have the highest energy density (11.4GJ/m(3)) and the lowest ash content (close to 1.2%). Combustion tests show that among the tested date palm residues, date stone may be the promising biofuel for the design of combustion processing system. However, a special attention to the design of the secondary air supply should be given to prevent high emissions of CO and volatile matters.

Gold nanoparticles-peptide based gas sensor arrays for the detection of food aromas.

A gas sensor array based on peptide modified gold nanoparticles deposited onto 20MHz quartz crystal microbalances has been realized. Glutathione and its constituting aminoacids and dipeptides have been used as ligands. A great increase in sensitivity (2 orders of magnitude) was achieved using gold nanoparticles versus monolayer modified QCMs. The sensors have been characterised in terms of sensitivity for hexane, water, trimethylammine and ethanol. Highest sensitivity was found for water. The ability to discriminate typical food aromas as cis-3-hexenol, isopentylacetate, ethylacetate, and terpinen-4-ol dissolved in different solvents was studied using a gas sensor array constituted by gold nanoparticles modified with the glutathione peptides, thioglycolic acid and an heptapeptide. The array was found able to discriminate the food aromas, the response being dependent on the polarity of the solvent used. Tests on real olive oil samples gave a satisfactory separation among samples having defects versus non defected samples demonstrating that this approach has high potential for the development of gas sensor arrays to be used in real samples.

[Mechanism and performance of a membrane bioreactor for treatment of toluene vapors].

The performance of a membrane bioreactor for treatment of toluene as a model pollutant is presented. Effects of toluene inlet concentration, residence time, spray density and pH of liquid phase on the toluene removal rate were evaluated. The experimental results showed that the toluene removal efficiency reached 99%. The optimal pH, residence time and spray density were 7.2, 6.4 s and 2.5 m3 x (m2 x h)(-1), respectively. The gas-phase biodegradation intermediate products were acetaldehyde acid (C2H2O3) and vinyl formic acid (C3H4O2), which were identified by means of gas chromatography/mass spectrometry (GC/MS). The mechanism of toluene degradation using a membrane bioreactor can be described as the combination of mass transfer from hollow fiber membrane to biofilm and biological degradation. Toluene (C6H5CH3) and oxygen diffused from the gas phase to the wet layer of the biofilm and were then consumed by the microbial communities. Toluene was oxidized to the intermediate organic products such as acetaldehyde acid (C2H2O3) and vinyl formic acid (C3H4O2), and the intermediate products were then converted to CO2 and H2O through continuous biological oxidation reactions.

Recent advances in two-phase partitioning bioreactors for the treatment of volatile organic compounds.

Biological processes are considered to be the most cost-effective technology for the off-gas treatment of volatile organic compounds (VOC) at low concentrations. Two-phase partitioning bioreactors (TPPBs) emerged in the early 1990s as innovative multiphase systems capable of overcoming some of the key limitations of traditional biological technologies such as the low mass transfer rates of hydrophobic VOCs and microbial inhibition at high VOC loading rates. Intensive research carried out in the last 5 years has helped to provide a better understanding of the mass transfer phenomena and VOC uptake mechanisms in TPPBs, which has significantly improved the VOC biodegradation processes utilizing this technology platform. This work presents an updated state-of-the-art review on the advances of TPPB technology for air pollution control. The most recent insights regarding non-aqueous phase (NAP) selection, microbiology, reactor design, mathematical modeling and case studies are critically reviewed and discussed. Finally, the key research issues required to move towards the development of efficient and stable full-scale VOC biodegradation processes in TPPBs are identified.

Greenhouse gas reductions through enhanced use of residues in the life cycle of Malaysian palm oil derived biodiesel.

This study identifies the potential greenhouse gas (GHG) reductions, which can be achieved by optimizing the use of residues in the life cycle of palm oil derived biodiesel. This is done through compilation of data on existing and prospective treatment technologies as well as practical experiments on methane potentials from empty fruit bunches. Methane capture from the anaerobic digestion of palm oil mill effluent was found to result in the highest GHG reductions. Among the solid residues, energy extraction from shells was found to constitute the biggest GHG savings per ton of residue, whereas energy extraction from empty fruit bunches was found to be the most significant in the biodiesel production life cycle. All the studied waste treatment technologies performed significantly better than the conventional practices and with dedicated efforts of optimized use in the palm oil industry, the production of palm oil derived biodiesel can be almost carbon neutral.

Treatment of waste gas from the breather vent of a vertical fixed roof p-xylene storage tank by a trickle-bed air biofilter.

This study applied a pilot-scale trickle-bed air biofilter (TBAB) system for treating waste gas emitted from the breather vent of a vertical fixed roof storage tank containing p-xylene (p-X) liquid. The volatile organic compound (VOC) concentration of the waste gas was related to ambient temperature as well as solar radiation, peaking at above 6300 ppmv of p-X and 25000 ppmv of total hydrocarbons during the hours of 8 AM to 3 PM. When the activated carbon adsorber was employed as a VOC buffer, the peak waste gas VOC concentration was significantly reduced resulting in a stably and efficiently performing TBAB system. The pressure drop appeared to be low, reflecting that the TBAB system could be employed in the prolonged operation with a low running penalty. These advantages suggest that the TBAB system is a cost-effective treatment technology for VOC emission from a fixed roof storage tank.

Treatment of waste gas containing low concentration of dimethyl sulphide (DMS) in a bench-scale biofilter.

Biological treatment of dimethyl sulphide (DMS) was investigated in a bench-scale biofilter, packed with compost along with wood chips, and enriched with DMS degrading microorganism Bacillus sphaericus. The biofilter could remove 62-74% of the inlet DMS, at an optimum loading of 0.484 g/m(3)/h with optimum empty bed contact time (EBCT) of 384 s and an average moisture range of 65-70%. The biodegradative products of DMS were sulphide, thiosulphate and sulphate. Evaluation of microbiological status of the biofilter indicated the presence of other bacterial cultures viz. Paenibacillus polymyxa, and Bacillus megaterium, besides B. sphaericus.

The efficiency of biological aerobic treatment of piggery wastewater to control nitrogen, phosphorus, pathogen and gas emissions.

Due to the water pollution and in order to reduce the nitrogen load applied on soils, biological nitrogen removal treatment of piggery wastewaters was developed in Brittany (France), with 250-300 units running. Four types of treatment processes were built including a biological reactor allowing to remove about 60-70% of the nitrogen content as gas by nitrification/denitrification. The addition of different mechanical separators (screw-press, centrifuge decanter ...) led to concentration of phosphorus in an exportable solid phase, allowing a reduction up to 80% of the phosphorus applied locally on soils. Moreover, a reduction of the gaseous emissions was observed using this management process as compared to conventional management (storage + land spreading) including ammonia (up to 68%) and greenhouse gases (55%). Finally, the level of enteric and pathogenic bacteria was also decreased with the treatment process as compared to conventional management systems. However, in spite of these results, the significant cost of the treatment must be underlined and alternative systems including anaerobic digestion will have to be studied.

Comparison of hydrodistillation and ultrasonic solvent extraction for the isolation of volatile compounds from two unifloral honeys of Robinia pseudoacacia L. and Castanea sativa L.

A comparative study of ultrasound-assisted extraction (USE) with the mixture pentane:ether (1:2) and hydrodistillation (HD) with the same trapping mixture is presented for the isolation of volatile compounds from two unifloral honeys of Robinia pseudoacacia L. and Castanea sativa L. All HD isolates contained many thermally derived artefacts (especially phenylacetaldehyde with lower percentages of furfural, cis- and trans-linalool oxides and others). USE method gave the most representative profile of all honey volatiles (without artefacts). In addition, USE enabled extraction of low molecular weight semivolatile markers (especially benzoic, vanillic and phenylacetic acids) that were not extracted by HD. In this regard, low percentage of benzoic acid (0.7-7.4%), vanillic acid (0.0-1.6%) and phenylacetic acid (0.5-4.1%) was determined in Rp USE extracts, while Cs USE extracts contained phenylacetic acid (20.2-23.5%) as the major constituent with low percentage of benzoic acid (2.5-5.5%).

The two-phase water/silicon oil bioreactor prospects in off-gas treatment.

Research was carried out to develop a biphasic biologic reactor able to clean the gas effluents polluted by volatile organic compounds. Initially, Rhodococcus erythropolis T 902.1 was selected on the basis of its capacity to degrade isopropylbenzene (IPB). The effect of gas flow and IPB concentration on the biodegradation of IPB was evaluated. The results show that the use of silicon oil allows large quantities of IPB to be absorbed within the medium of biologic abatement. On the other hand, the biodegradation rate was directly correlated to the inlet flow of IPB. Thus, the reactor presents interesting opportunities for the biologic treatment of gas effluents.

Environmental biotechnology: the ongoing quest.

Environmental biotechnology, until now, has primarily focused on the development of technologies to treat aqueous, solid and gaseous wastes. At present, the basic knowledge on how biotechnology can handle these wastes has been acquired and the focus is now on the implementation of these processes as 'best available technology not entailing excessive costs' (BATNEEC) in the framework of strict and transparent environmental legislation. New environmental challenges continue to evolve, as it becomes clear that waste streams should be tackled in an overall holistic way. New technologies to reach this goal are currently under development. Novel aspects with respect to the domain of water treatment are, for example, the biomembrane reactor technology and the newly discovered processes to remove nitrogen by means of anaerobic ammonium oxidation. Also, most challenging is the continuing strive for re-use of treated wastewater. Indeed, water shortage is emerging in an increasing number of countries all over the world and necessitates the short cycling of water. Finally, biotechnology has a key role to play in the novel approaches to design wastewater treatment based on decentralised sanitation and reuse (DESAR). Solid waste is a major challenge worldwide. The implementation of anaerobic digestion to treat biowastes has become a grown-up technology. New approaches in which biotechnological processes are linked to physical processes, such as plasma technology, certainly deserve special attention for the coming decades. Soil and sediment clean up by means of biostimulation/remediation/augmentation is now well established. Certainly, a number of prospects need to be further explored, such as the use of special energy sources to stimulate in situ the microbial community and the seeding of knowledge to the in situ community by means of horizontal gene transfer mechanisms. A number of waste gases can be handled by biofilter systems. Biological treatment of wastegases is also evolving, inasmuch as that besides conventional chemical pollutants, now also highly problematic chemicals (even dioxins) can be dealt with through proper biotechnological approaches. A remarkable new potential is the use of well designed probiotics to upgrade aquaculture and together with conventional biological water treatment processes, to guarantee the overall water quality of this domain of food production.

Volatiles from potato plants infected with potato leafroll virus attract and arrest the virus vector, Myzus persicae (Homoptera: Aphididae).

The influence of viral disease symptoms on the behaviour of virus vectors has implications for disease epidemiology. Here we show that previously reported preferential colonization of potatoes infected by potato leafroll virus (genus Polerovirus) (luteovirus) (PLRV) by alatae of Myzus persicae, the principal aphid vector of PLRV, is influenced by volatile emissions from PLRV-infected plants. First, in our bioassays both differential immigration and emigration were involved in preferential colonization by aphids of PLRV-infected plants. Second, M. persicae apterae aggregated preferentially, on screening above leaflets of PLRV-infected potatoes as compared with leaflets from uninfected plants, or from plants infected with potato virus X (PVX) or potato virus Y (PVY). Third, the aphids aggregated preferentially on screening over leaflet models treated with volatiles collected from PLRV-infected plants as compared with those collected from uninfected plants. The specific cues eliciting the aphid responses were not determined, but differences between headspace volatiles of infected and uninfected plants suggest possible ones.