Efficient and prolonged antibacterial activity from porous PLGA microparticles and their application in food preservation.

Simple addition of a minute quantity of non-toxic mustard oil in water/oil/water (W/O/W) double emulsion led to a porous morphology at the surface as well as in the interior of the biodegradable PLGA (Poly(l-lactide-co-glycolide)) microparticles. An attempt was made to understand the mechanism of pore formation by analyzing optical micrographs and SEM images in addition to solution viscosity of organic phase and interfacial tension values between organic and aqueous phases. The origin of surface porosity was thought to come from the inclusion of inner water droplet, stabilized by heteroaggregation of mustard oil and PLGA chains along with PVA (polyvinyl alcohol), to the solidifying polymer skin. The surface pores did not arise in absence of mustard oil. The encapsulation and release of antibacterial active (benzoic acid) from porous PLGA particles was studied in PBS buffer (pH 7) at 37 °C for 60 days. The release profiles were well-controlled in nature, and found to be influenced by surface porosity of the particles that can be manipulated by varying the amount of mustard oil. The release mechanism can well be explained with the help of power law model. Strikingly, in liquid medium, porous particles were found completely suppressing the growth of Escherichia coli and Staphylococcus aureus for a prolonged period of 60 days. The strong antimicrobial activity (100% inhibition of bacterial growth) in porous particles can be linked to the enhanced surface area due to the formation of micro/nano pores which accelerate the hydrolytic degradation of PLGA to release lactic acid/glycolic acid (antibacterial) in addition to encapsulated antibacterial (benzoic acid). In a food model system, the shelf life of the water melon juice was also found to be enhanced by suppressing the growth of the natural microbes in comparison to control.

Biotin-Modified Polylactic- co-Glycolic Acid Nanoparticles with Improved Antiproliferative Activity of 15,16-Dihydrotanshinone I in Human Cervical Cancer Cells.

15,16-Dihydrotanshinone I (DI), a natural compound isolated from a traditional Asian functional food Salvia Miltiorrhiza Bunge, is known for its anticancer activity. However, poor solubility of DI limits its desirable anticancer application. Herein, polylactic- co-glycolic acid (PLGA) was functionalized with polyethylene glycol (PEG) and biotin to form copolymers PEG-PLGA (PPA) and biotin-PEG-PLGA (BPA). DI was encapsulated in copolymers PPA and BPA to obtain DI-PPA-NPs (NPs = nanoparticles) and DI-BPA-NPs, respectively. The particle size and its distribution, encapsulation efficiency, and in vitro releasing capacity of DI-BPA-NPs were characterized by biophysical methods. MTT assay was used to evaluate the antiproliferative activity of free DI, DI-PPA-NPs, and DI-BPA-NPs in human cervical cancer Hela cells. DI-BPA-NPs showed the highest cytotoxicity on Hela cells with an IC50 value of 4.55 ± 0.631 µM, while it was 8.20 ± 0.849 and 6.14 ± 0.312 µM for DI and DI-PPA-NPs in 72 h, respectively. The superior antiproliferative activity was supported by the fact that DI-BPA-NPs could be preferentially internalized by Hela cells, owing to their specific interaction between biotin and overexpressed biotin receptors. In addition, DI-BPA-NPs effectively inhibited Hela cell proliferation by inducing G2/M phase cycle arrest and decreasing the intracellular reactive oxygen species (ROS) level by 31.50 ± 2.29% in 5 min. In summary, DI-BPA-NPs shows improved antiproliferative activity against human cervical cancer as comparing with free DI, demonstrating its application potential in cancer therapy.

Multi-podant diglycolamides and room temperature ionic liquid impregnated resins: An excellent combination for extraction chromatography of actinides.

Extraction chromatography resins, prepared by impregnating two multi-podant diglycolamide ligands, viz. diglycolamide-functionalized calix[4]arene (C4DGA) and tripodal diglycolamide (T-DGA) dissolved in the room temperature ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide (RTIL: C4mimTf2N) on Chromosorb-W (an inert solid support), gave excellent results for the removal of trivalent actinides from acidic waste solutions. Distribution coefficient measurements on several metal ions showed selective sorption of Am(III) over hexavalent uranyl ions and other fission product elements such as strontium and cesium. The sorbed metal ions could be efficiently desorbed with a complexing solution containing guanidine carbonate and EDTA buffer. The sorption of Am(III) on both resins followed pseudo-second order rate kinetics with rate constants of 1.37×10(-6) and 6.88×10(-7)g/cpmmin for T-DGA and C4DGA resins, respectively. The metal sorption on both resins indicated the Langmuir monolayer chemisorption phenomenon with Eu(III) sorption capacities of 4.83±0.21 and 0.52±0.05mg per g of T-DGA and C4DGA resins, respectively. The results of column studies show that these resins are of interest for a possible application for the recovery of hazardous trivalent actinides from dilute aqueous solutions.

Facile Preparation of Bright-Fluorescent Soft Materials from Small Organic Molecules.

Highly fluorescent and biocompatible soft materials are desirable for many potential applications, but their synthetic processes are somehow complicated. Herein, we have explored the feasibility of synthesis of unconventional fluorescence soft materials from small organic molecules under mild conditions. A new blue-fluorescent soft material with high quantum yield (89.6 %) and eutectic feature prepared by simple heat treatment of citric acid (CA) and cysteine (Cys) aqueous mixtures below 100 °C in air was reported. The as-prepared fluorescent material has the features of facile preparation, low cost, scalable production and easy to process, making it suitable for applications like fluorescent labeling and light-emitting devices. This new finding opens a new venue for the preparation of fluorescent soft materials.

Prolonged naproxen joint residence time after intra-articular injection of lipophilic solutions comprising a naproxen glycolamide ester prodrug in the rat.

Intra-articular injection of oil solutions of lipophilic prodrugs that rapidly degrade to their parent compound in synovial fluid may constitute a feasible approach to increase the joint residence time of non-steroidal anti-inflammatory drugs. In this in vivo study, oil solutions of the N,N-diethyl glycolamide ester prodrug of naproxen (16 mg/ml) were injected into the rat knee joint by dosing 6 µl formulation per 100g body weight. The sustained release properties were compared to those of intra-articularly injected aqueous and oil solutions of naproxen by monitoring the naproxen serum concentrations over time. Two oils, medium-chain triglycerides and castor oil, differing with respect to viscosity were tested. After intra-articular administration of oil prodrug solutions, a significant increase in the time to maximum naproxen serum concentration from around 40 to 245 min, an increase in the MRT(j) from around 0.11 to 3.3h and a 30% reduction in the maximum serum concentration were observed compared to that of the parent naproxen. The similar serum profiles obtained using the two oils indicate that the release was not affected by the oil viscosity. A prolonged naproxen joint residence time in rats was shown by intra-articular injection of an oil prodrug solution.

Utilizing hydroglycolic extract from myrobalan fruits to counteract reactive oxygen species.

The hydroglycolic (HG) extract from 70% propylene glycol (PG) extraction of myrobalan fruits showed the most appreciable antioxidant efficiency towards 1,1-diphenyl-2-picrylhydrazyl (DPPH) in comparison to the extracts from 30, 50, 70 and 100% ethyl alcohol (EA), and 30, 50 and 100% PG . Its total polyphenols were also higher than others. The additional analysis of antioxidant power revealed that this HG extract was able to counteract the induced oxidation caused by hydrogen peroxide (H(2) O(2) ) and 2,2'-azobis(2-amidinopropane) dihydrochloride (AAPH). The quantification for the antioxidant capacity of the extract showed it was equivalent to 93.78 mg of 6-hydroxy-2,5,7,8-tetramethychroman-2-carboxylic acid (Trolox) g(-1) by 2,2'-azino-bis(3-ethylbenzthiazoline-6-suphonic acid) diammonium (ABTS) assay, and was 140.17 mg ascorbic acid (AA) equivalent g(-1) and 107.50 mg Trolox equivalent g(-1) by photochemiluminescence (PCL) assay. The incorporation of the HG myrobalan extract into lotion and sunscreen lotion rendered these products to provide the similar antioxidant power as the extract alone.

Effects of poly (lactic-co-glycolic acid) as a co-emulsifier on the preparation and hypoglycaemic activity of insulin-loaded solid lipid nanoparticles.

Poly (lactic-co-glycolic acid) (PLGA) was used as a co-emulsifier in the preparation of insulin-loaded solid lipid nanoparticles (SLN) with hydrogenated castor oil as lipid matrix and lecithin as surfactant by double-emulsion technique. The effects of PLGA on the preparation and hypoglycaemic activity of insulin-loaded SLN were studied. The results showed that with the supplement of PLGA, the encapsulation efficiency and loading capacity were increased significantly from 79.08 +/- 1.62 to 85.57 +/- 3.21% and 1.58 +/- 0.03 to 1.71 +/- 0.06%, whereas the surface charge and particle size were changed insignificantly from -25.87 +/- 2.65 to -22.67 +/- 1.19 mv and 431.0 +/- 16.1 to 397.0 +/- 68.0 nm, respectively. In vivo studies demonstrated that PLGA increased the sustained hypoglycaemic activity from 12 to 36 h and 24 to 120 h in normal and steptozotocin-induced diabetic mice after a single intramuscular injection of the insulin-loaded SLN. These results demonstrated that PLGA could enhance the entrapment of insulin in the nanoparticles, and more importantly, prolong the time of hypoglycaemic activity of the insulin-loaded SLN.

Discovery and SAR of para-alkylthiophenoxyacetic acids as potent and selective PPARdelta agonists.

Synthesis and SAR of para-alkylthiophenoxyacetic acids is described. Achiral compounds 30, 31 and 32 were identified as potent and selective PPARdelta agonists.

Assessment of hypolipidaemic activity of three thiazolidin-4-ones in mice given high-fat diet and fructose.

Three 4-thiazolidinones, two with nicotinamide (NAT1 and NAT2) and one with 4-chlorophenoxyacetamide (PAT1) side chains were evaluated for their hypolipidaemic, hypoglycaemic activity in Swiss albino mice fed a high-fat diet along with fructose administered in drinking water. NAT1 and PAT caused reduction of elevated triglycerides, cholesterol and glucose; NAT2 was effective only against triglycerides. Nicotinamide side chain might have contributed to the lipid lowering effect of both NAT1 and NAT2, but the bulky group of the latter could have affected proper binding to the receptor sites, making it ineffective against elevated cholesterol. On the other hand, the 4-chlorophenoxyacetamide side chain of PAT might have exerted powerful hypolipidaemic activity, despite the bulky substitution at C2. As antioxidants, NAT2 and PAT1 showed superior activity, compared to NAT1. The thiazolidinone ring might be responsible for the lipid lowering effect, which is however, modified by the type of substitutions at C2 and N of the ring. Detailed study is warranted to explain the mechanism of action of these compounds as also to make more potent ones.

Monitoring of peptide acylation inside degrading PLGA microspheres by capillary electrophoresis and MALDI-TOF mass spectrometry.

The purpose of this research was to assess the acylation reactions of peptides, salmon calcitonin (sCT), human parathyroid hormone 1-34 (hPTH1-34) and leuprolide, in poly(lactic-co-glycolic acid) (PLGA) microspheres. Capillary electrophoresis (CE) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) were used for determining and monitoring peptide acylation and quantitating acylation products in the degrading PLGA microspheres. In the degrading PLGA microspheres of sCT and hPTH1-34, the acylation products were observed and determined to be adducts with glycolic acid units from degradable PLGA polymer by MALDI-TOF MS. In the microsphere of leuprolide, however, the acylation product was not observed even after 28 days of incubation at the release medium, which represents the different stabilities among peptides according to the primary structure. As the leuprolide contains tyrosine and serine having hydroxyl group of nucleophilic amino acids, the acylation reaction of peptide is shown to be mainly due to the primary amino groups of N-terminus or lysine residue. The complementary use of CE and MALDI-TOF MS will be useful for searching the counter measures as well as determining the peptide acylation in the manufactured formulations on the market.