A Cancer Nanovaccine Based on an FeAl-Layered Double Hydroxide Framework for Reactive Oxygen Species-Augmented Metalloimmunotherapy.

The complexity and heterogeneity of individual tumors have hindered the efficacy of existing therapeutic cancer vaccines, sparking intensive interest in the development of more effective in situ vaccines. Herein, we introduce a cancer nanovaccine for reactive oxygen species-augmented metalloimmunotherapy in which FeAl-layered double hydroxide (LDH) is used as a delivery vehicle with dihydroartemisinin (DHA) as cargo. The LDH framework is acid-labile and can be degraded in the tumor microenvironment, releasing iron ions, aluminum ions, and DHA. The iron ions contribute to aggravated intratumoral oxidative stress injury by the synergistic Fenton reaction and DHA activation, causing apoptosis, ferroptosis, and immunogenic cell death in cancer cells. The subsequently released tumor-associated antigens with the aluminum adjuvant form a cancer nanovaccine to generate robust and long-term immune responses against cancer recurrence and metastasis. Moreover, Fe ion-enabled T1-weighted magnetic resonance imaging can facilitate real-time tumor therapy monitoring. This cancer-nanovaccine-mediated metalloimmunotherapy strategy has the potential for revolutionizing the precision immunotherapy landscape.

Metal element-based adsorbents for phosphorus capture: Chaperone effect, performance and mechanism.

Excessive phosphorus (P) enters the water bodies via wastewater discharges or agricultural runoff, triggering serious environmental problems such as eutrophication. In contrast, P as an irreplaceable key resource, presents notable supply-demand contradictions due to ineffective recovery mechanisms. Hence, constructing a system that simultaneously reduce P contaminants and effective recycling has profound theoretical and practical implications. Metal element-based adsorbents, including metal (hydro) oxides, layered double hydroxides (LDHs) and metal-organic frameworks (MOFs), exhibit a significant chaperone effect stemming from strong orbital hybridization between their intrinsic Lewis acid sites and P (Lewis base). This review aims to parse the structure-effect relationship between metal element-based adsorbents and P, and explores how to optimize the P removal properties. Special emphasis is given to the formation of the metal-P chemical bond, which not only depends on the type of metal in the adsorbent but also closely relates to its surface activity and pore structure. Then, we delve into the intrinsic mechanisms behind these adsorbents' remarkable adsorption capacity and precise targeting. Finally, we offer an insightful discussion of the prospects and challenges of metal element-based adsorbents in terms of precise material control, large-scale production, P-directed adsorption and effective utilization.

In vitroanalysis of insoluble salt formation mechanism associated with Mg corrosion-variations depending on the diffusion environment in model tissue.

Magnesium (Mg) alloys have attracted attention as biodegradable metals, but the details of their corrosion behavior under biological environment have not been elucidated. Previous studies have suggested that diffusion through blood flow may influence Mg corrosion. Therefore, to understand the degradation behaviors of Mg, we analyzed insoluble salt precipitation associated with Mg corrosion in model tissue with different diffusion rates. A pure Mg specimen was immersed into a model tissue prepared with cell culture medium supplemented by a thickener at a different concentration (0.2%-0.5%) to form the gel. Micro-focus x-ray computed tomography of the gel was performed to observe gas cavity formation around the specimen. The insoluble salt layer formed on the specimen surface were analyzed by scanning electron microscopy with energy-dispersive x-ray spectroscopy, and Raman spectroscopy. As results, gas cavity formation was observed for all specimens. At day 7, the gas cavity volume was the highest at 0.5% thickener gel followed by 0.3% thickener gel. The insoluble salts were classified into three types based on their morphology; plate-like, granular-like, and crater-like salts. The crater-like salts were observed to cover 16.8 ± 3.9% of the specimen surface immersed in the 0.5% thickener gel, at the specimen area contacted to the gas cavity. The crater-like salts were composed by Mg hydroxide and carbonate from the deepest to the top layer. In plate-like or granular-like salts, Mg carbonate was formed in the deepest layer, but phosphates and carbonates, mainly containing calcium not Mg, were formed on the surface layer. In conclusion, the increase in the thickener concentration increased the gas cavity volume contacting to the specimen surface, resulting in the increase in precipitation of Mg hydroxide and carbonate, composing crater-like salts. Mg hydroxide and carbonate precipitation suggests the local increase in OH-concentration, which may be attributed to the decrease in diffusion rate.

Efficient removal and transformation of Cr(VI) from alkaline wastewater to form a ferrochromium spinel multiphase via a modified ferrite process.

Chromium-containing wastewater causes serious environmental pollution due to the harmfulness of Cr(VI). The ferrite process is typically used to treat chromium-containing wastewater and recycle the valuable chromium metal. However, the current ferrite process is unable to fully transform Cr(VI) into chromium ferrite under mild reaction conditions. This paper proposes a novel ferrite process to treat chromium-containing wastewater and recover valuable chromium metal. The process combines FeSO4 reduction and hydrothermal treatment to remove Cr(VI) and form chromium ferrite composites. The Cr(VI) concentration in the wastewater was reduced from 1040 mg L-1 to 0.035 mg L-1, and the Cr(VI) leaching toxicity of the precipitate was 0.21 mg L-1 under optimal hydrothermal conditions. The precipitate consisted of micron-sized ferrochromium spinel multiphase with polyhedral structure. The mechanism of Cr(VI) removal involved three steps: 1) partial oxidation of FeSO4 to Fe(III) hydroxide and oxy-hydroxide; 2) reduction of Cr(VI) by FeSO4 to Cr(III) and Fe(III) precipitates; 3) transformation and growth of the precipitates into chromium ferrite composites. This process meets the release standards of industrial wastewater and hazardous waste and can improve the efficiency of the ferrite process for toxic heavy metal removal.

Anti-Acidification and Immune Regulation by Nano-Ceria-Loaded Mg-Al Layered Double Hydroxide for Rheumatoid Arthritis Therapy.

Rheumatoid arthritis (RA) is a chronic autoimmune disease featuring an abnormal immune microenvironment and resultant accumulation of hydrogen ions (H+ ) produced by activated osteoclasts (OCs). Currently, clinic RA therapy can hardly achieve sustained or efficient therapeutic outcomes due to the failures in generating sufficient immune modulation and manipulating the accumulation of H+ that deteriorates bone damage. Herein, a highly effective immune modulatory nanocatalytic platform, nanoceria-loaded magnesium aluminum layered double hydroxide (LDH-CeO2 ), is proposed for enhanced immune modulation based on acid neutralization and metal ion inherent bioactivity. Specifically, the mild alkaline LDH initiates significant M2 repolarization of macrophages triggered by the elevated antioxidation effect of CeO2 via neutralizing excessive H+ in RA microenvironment, thus resulting in the efficient recruitment of regulatory T cell (Treg) and suppressions on T helper 17 cell (Th 17) and plasma cells. Moreover, the osteogenic activity is stimulated by the Mg ion released from LDH, thereby promoting the damaged bone healing. The encouraging therapeutic outcomes in adjuvant-induced RA model mice demonstrate the high feasibility of such a therapeutic concept, which provides a novel and efficient RA therapeutic modality by the immune modulatory and bone-repairing effects of inorganic nanocatalytic material.

Nanoengineered injectable hydrogels derived from layered double hydroxides and alginate for sustained release of protein therapeutics in tissue engineering applications.

Chronic Kidney Disease (CKD) which involves gradual loss of kidney function is characterized by low levels of a glycoprotein called Erythropoietin (EPO) that leads to red blood cell  deficiency and anemia. Recombinant human EPO (rhEPO) injections that are administered intravenously or subcutaneously is the current gold standard for treating CKD. The rhEPO injections have very short half-lives and thus demands frequent administration with a risk of high endogenous EPO levels leading to severe side effects that could prove fatal. To this effect, this work provides a novel approach of using lamellar inorganic solids with a brucite-like structure for controlling the release of protein therapeutics such as rhEPO in injectable hydrogels. The nanoengineered injectable system was formulated by incorporating two-dimensional layered double hydroxide (LDH) clay materials with a high surface area into alginate hydrogels for sustained delivery. The inclusion of LDH in the hydrogel network not only improved the mechanical properties of the hydrogels (5-30 times that of alginate hydrogel) but also exhibited a high binding affinity to proteins without altering their bioactivity and conformation. Furthermore, the nanoengineered injectable hydrogels (INHs) demonstrated quick gelation, injectability, and excellent adhesion properties on human skin. The in vitro release test of EPO from conventional alginate hydrogels (Alg-Gel) showed 86% EPO release within 108 h while INHs showed greater control over the initial burst and released only 24% of EPO in the same incubation time. INH-based ink was successfully used for 3D printing, resulting in scaffolds with good shape fidelity and stability in cell culture media. Controlled release of EPO from INHs facilitated superior angiogenic potential in ovo (chick chorioallantoic membrane) compared to Alg-Gel. When subcutaneously implanted in albino mice, the INHs formed a stable gel in vivo without inducing any adverse effects. The results suggest that the proposed INHs in this study can be utilized as a minimally invasive injectable platform or as 3D printed patches for the delivery of protein therapeutics to facilitate tissue regeneration.

Bioinspired fabrication of zinc hydroxide-based nanostructure from lignocellulosic biomass Litchi chinensis leaves and its efficacy evaluation on antibacterial, antioxidant, and anticancer activity.

Zinc-based nanostructures are known for their numerous potential biomedical applications. In this context, the biosynthesis of nanostructures using plant extracts has become a more sustainable and promising alternative to effectively replace conventional chemical methods while avoiding their toxic impact. In this study, following a low-temperature calcination process, a green synthesis of Zn-hydroxide-based nanostructure has been performed using an aqueous extract derived from the leaves of Litchi chinensis, which is employed as a lignocellulose waste biomass known to possess a variety of phytocompounds. The biogenic preparation of Zn-hydroxide based nanostructures is enabled by bioactive compounds present in the leaf extract, which act as reducing and capping agents. In order to evaluate its physicochemical characteristics, the produced Zn-hydroxide-based nanostructure has been subjected to several characterization techniques. Further, the multifunctional properties of the prepared Zn-hydroxide-based nanostructure have been evaluated for antioxidant, antimicrobial, and anticancer activity. The prepared nanostructure showed antibacterial efficacy against Bacillus subtilis and demonstrated its anti-biofilm activity as evaluated through the Congo red method. In addition, the antioxidant activity of the prepared nanostructure has been found to be dose-dependent, wherein 91.52 % scavenging activity could be recorded at 200 µg/ml, with an IC50 value of 45.22 µg/ml, indicating the prepared nanostructure has a high radical scavenging activity. Besides, the in vitro cytotoxicity investigation against HepG2 cell lines explored that the as-prepared nanostructure exhibited a higher cytotoxic effect and 73.21 % cell inhibition could be noticed at 25.6 µg/ml with an IC50 of 2.58 µg/ml. On the contrary, it was found to be significantly lower in the case of HEK-293 cell lines, wherein ~47.64 % inhibition could be noticed at the same concentration. These findings might be further extended to develop unique biologically derived nanostructures that can be extensively evaluated for various biomedical purposes.

Protein-coated cobalt oxide-hydroxide nanospheres deliver photosensitizer IR780 iodide for near-infrared light-triggered photodynamic/photothermal/chemodynamic therapy against colon cancer.

Phototherapy has garnered worldwide attention for its minimal invasiveness, controllability, and spatial selectivity in treating cancer. One promising approach involves the use of near-infrared dye IR780, which demonstrates both photodynamic therapy (PDT) and photothermal therapy (PTT) effects under 808 nm laser irradiation. However, this hydrophobic dye's toxicity and limited tumor targeting ability severely hamper its suitability for cancer applications. Herein, a biocompatible nanoplatform CoOOH-IR780@BSA (CoIRB) is developed to efficiently deliver IR780 and provide multi-mode treatments for colon tumors. Due to the nanocarrier coating, CoIRB nanoparticles demonstrated reliable dispersion and stability, and their biotoxicity was substantially reduced for safer blood circulation, which overcame the biological barrier of IR780. The nanoplatform has also shown considerable results in phototherapy in vivo and in vitro experiments, with successful inhibition of MC38 tumor growth through intravenous administration. Additionally, the introduction of cobalt ions could induce Fenton-like reactions to activate the production of toxic hydroxyl radicals (˙OH), exerting an assisted chemodynamic therapy (CDT) effect. Notably, these nanodrugs also exhibited potential as scavengers of reductive glutathione (GSH) and hydrogen sulfide (H2S), leading to amplifying oxidative damage of reactive oxygen species (ROS). Overall, the versatile therapeutic platform, CoIRB, has opened up considerable prospects as a biotherapeutic option for combining PDT/PTT/CDT against colon cancer.

FeCa-based layered double hydroxide, a high-performance phosphorus adsorbent in constructed wetlands and ecological dams - A pilot scale study.

Research studies have modified traditional substances to seek fast-acting removal of phosphorus in constructed wetlands (CWs) and ecological dams, rather than develop a brand-new nano-adsorbent. This work synthesized FeCa-based layered double hydroxide (FeCa-LDH) with a chemical co-precipitation method, and the performance, mechanism and factors of phosphorus removal were investigated. FeCa-LDH showed a marked ability to adsorb phosphorus from waste water, with a removal efficiency of 94.4% and 98.2% in CWs and ecological dams, respectively. Both FTIR and XPS spectrum evidenced that FeCa-LDH removed phosphorus via electrostatic and hydrogen-bonding adsorption, as well as a coordination reaction and interlayer anion exchange. FeCa-LDH showed a higher capacity to remove phosphorus in alkaline and neutral waste water than in acid conditions. Co-occurrence anions, which influenced the efficiency of the phosphorus removal capacity are considered in the sequence below: CO32- ≈ HCO3- > SO42- > NO3-. Innovatively, FeCa-LDH was not affected by the low-temperature limitation for CWs, and phosphorus removal efficiency at 5 °C was almost equal to that at 25 °C. These results cast a new idea on the construction, application and phosphorus removal performance of CWs and ecological dams.

Interactions between Layered Double Hydroxide Nanoparticles and Egg Yolk Lecithin Liposome Membranes.

The burgeoning need to study the applications of nanoparticles (NPs) in biomedical and pharmaceutical fields requires an understanding of their interactions with lipid membranes for further in vivo studies. In this paper, negatively charged egg yolk lecithin liposome (EYL) has been prepared and used as model lipid membranes. Positively charged Mg3Al-layered double hydroxides (LDHs) are viewed as models of clay particles. The ability of the LDH NPs, a two-dimensional nanostructure with an average diameter of 100 nm (LDHs-100) or 500 nm (LDHs-500) to cross the membranes, has been thoroughly investigated via (high-resolution) transmission electron microscopy (TEM), optical microscopy (OM), scanning electron microscopy (SEM), confocal fluorescence microscopy (CLSM), and dynamic light scattering (DLS). The liposomes with an average diameter of 1.5 µm were prepared by the thin-film rehydration method followed by an extrusion technique. A calcein leakage assay and steady-state fluorescence measurement displayed the variation of membrane integrity and polarity of the pyrene-located microenvironment during the interaction between EYL and calcein-interacted LDH NPs (CE-LDHs) or LDH NPs, respectively. These results imply that not only spherical particles but also even more sophisticated nanostructured materials are able to effectively cross the lipid bilayers, thereby engineering new compounds that may be encapsulated for safe and potential use in biomedical applications.

Enhanced selectivity and recovery of phosphate and nitrate ions onto coffee ground waste biochars via co-precipitation of Mg/Al layered double hydroxides: A potential slow-release fertilizer.

In this study, the feasibility of Mg/Al layered double hydroxides (LDH) functionalized coffee ground waste biochars (LDHMgAl@CWGB) as a potential adsorbent to selectively recover phosphate (PO43-) and nitrate (NO3-) ions in aqueous phases and their consecutive uses as a slow-release fertilizer for stimulating the plant growth were identified. The higher adsorption capacity of PO43- and NO3- ions by LDHMgAl@CWGB (PO43- = 6.98 mgP/g, NO3- = 2.82 mgN/g) compared with pristine coffee ground waste biochars (CWGB; PO43- = 0.19 mgP/g, NO3- = 0.32 mgN/g) was mainly due to the incorporation of Mg/Al mixed oxides and Cl contents. Chemisorption and intra-particle mainly controlled the adsorptive recovery of PO43- and NO3- ions by CWGB and LDHMgAl@CWGB in aqueous phases and their adsorption toward CWGB and LDHMgAl@CWGB proceeded endothermically and spontaneously. The changes in the major adsorption mechanisms of PO43- and NO3- ions from ligand exchange (CWGB) to electrostatic surface complexation and anion-exchange (LDHMgAl@CWGB) supported the conclusion that the alternation of the surface features through Mg/Al LDH functionalization might improve selectivity and adsorption capacity of PO43- and NO3- ions onto CWGB under the co-existence of Cl-, SO42-, and HCO3- ions. Since PO43-- and NO3--loaded LDHMgAl@CWGB exhibited much higher seed germination, root and shoot growth rates of garden cress seeds (Lepidium sativum L) than other liquid and solid matrices, including 5 mgP/L PO43- and 5 mgN/L NO3-, 10 mgP/L PO43- and 10 mgN/L NO3-, and LDHMgAl@CWGB, it can be postulated that PO43-- and NO3--loaded LDHMgAl@CWGB could be practically applicable to the agricultural field as a slow-release fertilizer to facilitate the seed germination, root and shoot growth of the plants.

Layered double hydroxides, an effective nanomaterial to remove phosphorus from wastewater: Performance, mechanism, factors and reusability.

Systematic understanding of phosphorus adsorption performance, mechanism, factors and reusability of layered double hydroxides (LDH) remains limited. Thus, iron (Fe), calcium (Ca) and magnesium (Mg)-based LDH (FeCa-LDH and FeMg-LDH), were synthesized with a co-precipitation method to improve phosphorus removal efficiency during the wastewater treatment process. Both FeCa-LDH and FeMg-LDH showed a considerable ability to remove phosphorus in wastewater. When the phosphorus concentration was 10 mg/L, the removal efficiency reached 99 % (FeCa-LDH: 1 min) and 82 % (FeMg-LDH: 10 min), respectively. The phosphorus removal mechanism was observed to be electrostatic adsorption, coordination reaction and anionic exchange, which was more evident at pH = 10 for FeCa-LDH. Co-occurrence anions that affected phosphorus removal efficiency, were observed in the following order: HCO3- > CO32- ≈ NO3- > SO42-. After five adsorption-desorption cycles, phosphorus removal efficiency was still up to 85 % (FeCa-LDH) and 42 % (FeMg-LDH), respectively. Together, the present findings suggest that LDHs were high-performance, strongly-stable and reusable phosphorus adsorbents.

Effects of dietary zinc chloride hydroxide and zinc methionine on the immune system and blood profile of healthy adult horses and ponies.

The effects of dietary zinc on the immune function of equines have not been evaluated in detail so far. In the present study, eight healthy adult ponies and two healthy adult horses were fed a diet supplemented with either zinc chloride hydroxide or zinc methionine in six feeding periods of four weeks each (according to maintenance zinc requirement, 120 mg zinc/kg dry matter, and 240 mg zinc/kg dry matter, for both dietary zinc supplements, respectively). All animals received the six diets, with increasing amounts of zinc chloride hydroxide in the feeding periods 1-3, and with increasing amounts of zinc methionine in the feeding periods 4-6. At the end of each feeding period, blood samples were collected for a blood profile and the measurement of selected immune variables. Increasing dietary zinc chloride hydroxide doses increased the glutathione concentrations in the erythrocyte concentrate and the glutathione peroxidase activity in the erythrocyte lysate, decreased the numbers of total leukocytes and granulocytes in the blood, and also decreased the interleukin-2 concentrations in the plasma of the animals. The dietary supplementation of increasing doses of zinc methionine enhanced the mitogen-stimulated proliferative activity of peripheral blood mononuclear cells, and decreased the glutathione concentrations in the erythrocyte concentrate and the glutathione peroxidase activity in the plasma of the animals. The percentage of blood monocytes with oxidative burst after in vitro stimulation with E. coli decreased with increasing dietary zinc concentrations, independently of the zinc compound used. The blood profile demonstrated effects of the zinc supplements on the red blood cells and the bilirubin metabolism of the horses and ponies, which require further investigation. Overall, high doses of dietary zinc modulate the equine immune system, for the most part also depending on the zinc compound used.

Highly efficient and reusable Mg-Fe layered double hydroxides anchored in attapulgite for uranium uptake from wastewater.

Micro/nano interface adsorption is an effective strategy for separating uranium from aqueous solutions. However, their undesirable capture efficiency and poor cycling stability limit their practical application. In this study, we developed a clay-based micro-adsorbent constructed using attapulgite (ATP) and Mg-Fe layered double hydroxides (Mg-Fe LDHs) for uranium uptake from wastewater. The surface charge affinity between ATP and Mg-Fe LDHs contributed to the robust heterostructure of the ATP@Mg-Fe LDHs adsorbent, thereby enabling a uniform distribution of Mg-Fe LDHs on the ATP surface. Thus, the aggregation behavior of Mg-Fe LDHs was significantly reduced and stellated with an improved dispersion performance of this ATP@Mg-Fe LDHs micro-composite in an aqueous solution. The uranium adsorption capacity was 670.21 mg/g, which is the maximum among previously reported clay-based adsorbents. Notably, a satisfying performance was achieved for the adsorbent stability; the uranium adsorption efficiency remained as high as 97% after eight cycles of adsorption-desorption. The ATP@Mg-Fe LDHs adsorbent for separating UO22+ from water is a promising system that combines efficiency, capacity, selectivity, and reusability, and has potential for scaled-up applications.

Pectin-Coated Baclofen-Layered Zinc Hydroxide Nanohybrid as a Bio-Based Nanocomposite Carrier for Oral Delivery.

pH-sensitive pectin beads were proposed as a protective capsule for layered zinc hydroxide-drug (LZH-Drug) nanohybrids in the gastrointestinal tract in this paper. Baclofen was intercalated between LZH layers using the co-precipitation method as a model drug. By combining LZH-baclofen with pectin, the resulting nanohybrid (LZH-baclofen) was used to make bio-nanocomposite hydrogel beads. FTIR, XRD, and SEM analyses were used to characterize the produced products. Baclofen anions are vertical to the LZH layers in the shape of a monolayer, according to the interlayer space of 19.6Å. The presence of nanocomposites is demonstrated by FTIR, which exhibits a peak at 3489 cm-1 for the OH group, 1564 and 1384 cm-1 for the-COO- vibration mode, indicating that baclofen is intercalated between the layered structures. After intercalation, baclofen's thermal stability is greatly improved. The nanohybrid is more compact, with agglomerates and flat surfaces of the intercalated substance, shown by SEM. In vitro release behaviors of baclofen from LZH and bio-nanocomposites in buffer solution were examined under pH values (pH = 1.2, 6.8, 7.4) chosen from a model of the passing materials through the gastrointestinal tract. For pectin encapsulated LZH-baclofen nanohybrid, drug release studies indicated superior protection against stomach pH and regulated release under intestinal tract conditions. Furthermore, nanohybrid and nanocomposite treatment of a normal fibroblast cell line resulted in cell survival up to 12.5 g/mL for a 24-h period, with inhibition reducing dose-dependently at higher concentrations. A novel intercalation molecule with a sustained release mode and improved toxicity against normal fibroblast cell lines has been produced as a result of the strong host-guest contacts between the LZH lattice and the baclofen anion. Further study into the utilization of brucite-like host materials in drug delivery systems should be based on these findings.

Complementary and Synergistic Design of Bi-Layered Double Hydroxides Modified Magnesium Alloy toward Multifunctional Orthopedic Implants.

Magnesium (Mg)-based alloys have been regarded as promising implants for future clinic orthopedics, however, how to endow them with good anti-corrosion and biofunctions still remains a great challenge, especially for complicated bone diseases. Herein, three transition metals (M = Mn, Fe, and Co)-containing layered double hydroxides (LDH) (LDH-Mn, LDH-Fe, and LDH-Co) with similar M content are prepared on Mg alloy via a novel two-step method, then systematic characterizations and comparisons are conducted in detail. Results showed that LDH-Mn exhibited the best corrosion resistance, LDH-Mn and LDH-Co possessed excellent photothermal and enzymatic activities, LDH-Fe revealed better cytocompatibility and antibacterial properties, while LDH-Co demonstrated high cytotoxicity. Based on these results, an optimized bilayer LDH coating enriched with Fe and Mn (LDH-MnFe) from top to bottom have been designed for further in vitro and in vivo analysis. The top Fe-riched layer provided biocompatibility and antibacterial properties, while the bottom Mn-riced layer provided excellent anti-corrosion, photothermal and enzymatic effects. In addition, the released Mg, Fe, and Mn ions have a positive influence on angiogenesis and osteogenesis. Thus, the LDH-MnFe showed complementary and synergistic effects on anti-corrosion and multibiofunctions (antibacteria, antitumor, and osteogenesis). The present work offers a novel multifunctional Mg-based implant for treating bone diseases.

Hotspots and Trends of Layered Double Hydroxide-based Adsorbents for Polluted Water Treatment: Insights from Bibliometric Analysis.

The use of layered double hydroxides (LDHs) as adsorbent for water treatment has been gaining relevance in recent years. In this context, this work aimed to map, through a bibliometric study, the extent of research that deals with the theme. The scientific database used was the Web of Science, and the chronology of the search consideredthe period from 1997 to 2022. The bibliometix R-package and VOSviewer software were used in this study. The searches retrieved a total of 663 documents, from 69 countries, distributed among all continents, which China (328), India (51) and Japan (40) were the most productive countries. Important journals in the environmental area and with high impact factor, such as Chemical Engineering Journal (44), Applied Clay Science (38), Journal of Hazardous Materials (35) and Chemosphere (27) most published in the area. The network of keywords used by the authors indicates that the publications retrieved deal mainly with aspects related to the efficiency of (LDHs) in the removal of different pollutants, the composition, the synthesis route and the association with other materials and/or techniques. The result of this study constitutes an important tool for directing future research on the subject.

Layered double hydroxides for phosphorus recovery from lipid-rich waste anaerobic fermentation liquor.

This study aimed to extract orthophosphate (ortho-P) from lipid-rich waste AF liquor (AFL) by Mg/Al layered double hydroxides (Mg/Al LDHs) adsorption, evaluate the influence of carbonate and investigate adsorption mechanisms. The carbonate influence experiment using synthetic P-rich wastewater indicated that low carbonate level was favorable for P extraction by LDHs. And then, real AFL rich in volatile fatty acids (VFAs), carbonate and ortho-P was applied as adsorbate to explore the Mg/Al LDHs adsorption performance. Experimental results indicated that 4 g/L Mg/Al LDHs could extract 88.3% of ortho-P from the AFL with low carbonate level (4829.83 mg CaCO3/L), and the adsorption quantity was 62.99 mg P/g LDHs, however, negligible VFAs were extracted. Kinetics and mechanisms analysis indicated that adsorption of P onto Mg/Al LDHs was a rapid physiochemical process, including ion exchange and surface adsorption. Finally, the nutrients release test confirmed the slow-release property of intercalated P.

Bio-Inorganic Layered Double Hydroxide Nanohybrids in Photochemotherapy: A Mini Review.

Clay-based bio-inorganic nanohybrids, such as layered double hydroxides (LDH), have been extensively researched in the various fields of biomedicine, particularly for drug delivery and bio-imaging applications. Recent trends indicate that such two-dimensional LDH can be hybridized with a variety of photo-active biomolecules to selectively achieve anti-cancer benefits through numerous photo/chemotherapies (PCT), including photothermal therapy, photodynamic therapy, and magnetic hyperthermia, a combination of therapies to achieve the best treatment regimen for patients that cannot be treated either by surgery or radiation alone. Among the novel two-dimensional clay-based bio-inorganic nanohybrids, LDH could enhance the photo-stability and drug release controllability of the PCT agents, which would, in turn, improve the overall phototherapeutic performance. This review article highlights the most recent advances in LDH-based two-dimensional clay-bio-inorganic nanohybrids for the aforementioned applications.

Enhancing the phosphorus content of layered double hydroxide fertilizers by intercalating polymeric phosphate instead of orthophosphate: A feasibility study.

HYPOTHESIS: Layered double hydroxide (LDH) loaded with orthophosphate (PO4) are suggested as slow-release P fertilizers. However, PO4-LDHs have a low maximal P content, related to high charge HPO42-/PO43- anions occupying the anion exchange capacity (AEC) of LDHs. We postulate that the P content of LDHs can be enhanced by exchanging them with polymeric-P (i.e. trimetaphosphate, P3O9), which has a lower molar charge/P ratio than its monomer. EXPERIMENTS: Adsorption capacities were compared between PO4 and P3O9 for as-synthesized and calcined MgAl LDHs with Mg/Al ratio of 2, 3, or 4; the P-LDHs were characterized (XRD, FTIR). Dialysis and soil incubation experiments were performed with PO4-LDHs, P3O9-LDHs, and corresponding soluble fertilizers to compare their P release and P solubility (CaCl2 extract). FINDINGS: The P adsorption capacities were 1.25-1.60 fold larger for P3O9 compared to PO4, yet the high theoretical P contents with P3O9 were not achieved (incomplete loading, P3O9 depolymerization). P3O9-Mg3Al released polymeric-P whereas P3O9-Mg2Al released depolymerized PO4, and P release from P3O9-LDHs was slower than that of PO4-LDHs. With soil incubation, soluble P from P3O9-LDH was initially lower but later converged to that of PO4-LDH as result of continued hydrolysis, yet did not exceed that of the soluble P3O9 and PO4 fertilizers.