Comparison of the push-out bond strength of AH Plus sealer to dentin after using different herbal irrigation solutions as the final rinse.

The aim of the present study was to evaluate the push-out bond strength of AH Plus sealer to dentin treated with the essential oils of Cumimum cyminum and Cinnamomum zeylanicum as herbal final irrigants. Forty human mandibular first premolars were selected. After smear layer removal, the samples were divided into 4 groups and irrigated with experimental solutions for 1 min and later with distilled water. G1: Cinnamomum zeylanicum (CZ) in minimum inhibitory concentration (MIC); G2: Sodium hypochlorite 2.5%; G3: Sodium hypochlorite in MIC; G4: Cuminum cyminum (CC) in MIC. After obturation, the roots were sectioned in order to obtain 1-mm discs for push-out assessment. The push-out test was performed using a universal testing machine. The slices were examined using a stereomicroscope at 30× to determine the mode of failure. The data were analyzed using one-way analysis of variance and Tukey's post-hoc test. The teeth irrigated with CZ showed significantly lower push-out resistance than those irrigated with NaOCl 2.5% and NaOCl at MIC. The other groups had no significant difference. The modes of failure were predominantly mixed. Under the limitations of the present study, CC does not have adverse effects on the bond strength of AH Plus and can be used as a good alternative for currently used final irrigants.

The Responses of Bioactive Betanin Pigment and Its Derivatives from a Red Beetroot (Beta vulgaris L.) Betalain-Rich Extract to Hypochlorous Acid.

Neutrophils produce hypochlorous acid (HOCl) as well as other reactive oxygen species as part of a natural innate immune response in the human body; however, excessive levels of HOCl can ultimately be detrimental to health. Recent reports suggest that betacyanin plant pigments can act as potent scavengers of inflammatory factors and are notably effective against HOCl. Comparison of the in vitro anti-hypochlorite activities of a novel betalain-rich red beetroot (Beta vulgaris L.) extract with its pure betalainic pigments revealed that the extract had the highest anti-hypochlorite activity, far exceeding the activity of all of the betalainic derivatives and selected reference antioxidants. This suggests that it may be an important food-based candidate for management of inflammatory conditions induced by excessive HOCl production. Among all pigments studied, betanidin exhibited the highest activity across the pH range.

Oxidation of dextran using H2O2 and NaClO/NaBr and their applicability in iron chelation.

The structural modification of polysaccharides directly affects their physicochemical properties and applications. Dextran, a chained polysaccharide, consists of multiple d-glucose molecules with repetitive structures. In this study, the physicochemical properties of oxidized dextran (DO) at different concentrations of NaClO/NaBr and H2O2 were compared. The results showed that NaClO/NaBr oxidation is more conducive to the formation of carboxyl groups. Oxidized dextran with NaClO/NaBr (DOB) showed good iron (III) chelating ability, and the DOB­iron (III) complex (DOBIC) had an iron content of 28.31%. According to structural analysis, NaClO/NaBr (2 g/100 g of active chlorine) and H2O2 (4 g/100 g), respectively, oxidize the C1 and C2 hydroxyl groups of dextran to carboxyl groups and open the ring when DO and iron have the strongest chelation ability. The complex is indeed a chelate iron complex, and iron core is composed of iron oxyhydroxide or the ß-FeOOH mineral polymorph. These results indicate that DOBIC is expected to be a good iron supplement or food additive to strengthen iron.

Effects of Hydrogen Peroxide and Sodium Hypochlorite Aging on Properties and Performance of Polyethersulfone Ultrafiltration Membrane.

Chemical reaction of main polymer and additive with oxidative cleaning agents plays an important role in aging of polymeric membrane for water and wastewater treatment. As a green and powerful oxidant, hydrogen peroxide (H2O2) can achieve good cleaning efficacy under alkaline condition, but its influence on membrane aging was poorly understood. In this study, degradation of polyethersulfone (PES) membrane due to H2O2 exposure under alkaline condition (pH 9 and 11) was holistically investigated by humic acid (HA) filtration experiments and multiple membrane characterization techniques, with sodium hypochlorite (NaClO) aging examined as a comparison. Membrane permeability and HA retention rate was hardly changed by H2O2 aging at an exposure dose of 500 g·h/L, whereas NaClO aging led to substantial increase of membrane permeability and significant decrease of retention ability. Meanwhile, H2O2 aging slightly increased fouling propensity with HA filtration, while NaClO aging resulted in more serious fouling. ATR-FTIR and XPS analysis revealed much less degradation of PES and hydrophilic additive by H2O2 than that by NaClO, and membrane morphology and surface properties were characterized to explain the variation of filtration performance. Overall, compared with cleaning with NaClO, membrane degradation can be minimized by cleaning with H2O2.

Effect of sodium hypochlorite and chlorhexidine irrigating solutions and their inactivating agents on the push-out bond strength of mineral trioxide aggregate.

The objective of this study was to evaluate the effect of sodium hypochlorite and chlorhexidine solutions and their inactivating agents on the push-out bond strength of mineral trioxide aggregate (MTA). One hundred fifty root slices were prepared and their root canal spaces were enlarged using diamond burs. MTA was prepared and compacted to root canal spaces. The samples were randomly separated to 4 groups that would be immersed into the selected solutions (5.25% sodium hypochlorite (NaOCl), 5.25% NaOCl and sodium thiosulfate, 2% chlorhexidine (CHX), 2% CHX and a mixture of Tween 80 and 0.3% L-alfa-lecithin) and a control group (n = 30). Push-out bond strength of each specimen was tested with universal testing machine. The data was analyzed by one-way analysis of variance and Tukey tests. There were no significant differences between the push-out bond strength values of the irrigation groups and the control group. A significant difference was found between the push-out bond strength values of NaOCl-Sodium thiosulfate and CHX-L-alpha-lecithin groups. Contact with NaOCl and its neutralizing agent with MTA after 10 minutes of setting period increased the push-out bond strength of MTA. On the other hand, any contact with CHX alone or with subsequent application using L-alfa-lecithin should be avoided since that might decrease the push-out bond strength of freshly mixed MTA.

Rosemary, Castor Oils, and Propolis Extract: Activity Against Candida Albicans and Alterations on Properties of Dental Acrylic Resins.

PURPOSE: To evaluate the in vitro activity of 8% rosemary, 2% castor oils, and 12% propolis glycolic extract against Candida albicans, as well as the physical changes of properties in colorless and pink acrylic resins after immersion in these liquids. MATERIALS AND METHODS: Colorimetric, roughness, and Knoop microhardness assays were evaluated in 25 specimens distributed into five groups (3 test groups and 2 control groups - distilled water and hypochlorite 1%), totaling five specimens per group for each acrylic resin (colorless and pink). The specimens were individually immersed for 30 minutes in 10 mL of these liquids, washed, and dried once a week. They were maintained in distilled water at 37°C between processes during all experiments. The analyses were performed before immersion and in the 4th and/or 12th month. In vitro, 18 acrylic resins were exposed to C. albicans and, after a process of 30 minutes in immersion in the five groups cited and oil vehicle control of vesicle (liquid Vaseline), the specimens were washed and incubated for 24 hours in 37°C. The growth was determined by colony counting. For comparisons between the groups in each trial and the disinfection test, paired Student's t-tests and ANOVA with post hoc Tukey were performed by the SPSS program, considering α = 0.05. RESULTS: None of the liquids altered the microhardness, but all the natural compounds and 1% sodium hypochlorite (control) altered color and roughness after the 12th month of immersion in these agents. In the colorless specimens, 8% rosemary oil caused a color change similar to water, and less color and roughness alterations when compared to 2% castor oil and 1% sodium hypochlorite, respectively. There was no growth of yeast colonies after immersion in rosemary oil, propolis glycolic extract, and 1% sodium hypochlorite. CONCLUSION: Eight percent rosemary oil has the potential to be used as an acrylic resin disinfectant.

How to improve root canal filling in teeth subjected to radiation therapy for cancer.

The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Canals were prepared with Reciproc-R50 and subdivided (n=10) for final irrigation (NaOCl, EDTA, chitosan) and filled. Three dentin slices were obtained from each root third. The first slice of each third was selected for BS evaluation, and the failure mode was determined by stereomicroscopy. SEM analysis of the sealer-dentin interface was performed in the remaining slices. Two-way ANOVA and Tukey's tests (α=0.05) were used. Lower BS (P<0.0001) was obtained after irradiation (2.07±0.79 MPa), regardless of the final irrigation solution used. The NaOCl group (P<0.001) had the lowest BS in the irradiated (1.68±0.72) and non-irradiated (2.39±0.89) groups, whereas the EDTA (irradiated: 2.14±0.77 and non-irradiated: 3.92±1.54) and chitosan (irradiated: 2.37±0.73 and non-irradiated: 3.51±1.47) groups demonstrated a higher BS (P<0.05). The highest values were observed in the coronal third (3.17±1.38) when compared to the middle (2.74±1.36) and apical ones (2.09±0.97)(P<0.0001). There were more cohesive failures and more gaps in irradiated specimens, regardless of the final solution. The present study showed that radiation was associated with a decrease in BS, regardless of the final solution used, whereas chitosan increased BS in teeth subjected to radiation therapy.

Influence of amylose content and oxidation level of potato starch on acetylation, granule structure and radicals' formation.

This study was aimed at determining the effect of the amylose content of starch and oxidation level of potato starch on the structure of starch granules, and susceptibility to chemical modification (acetylation) and subsequent generation of radicals. Potato starch and waxy potato starch were oxidised with sodium hypochlorite applied in doses corresponding to 10, 20, and 30gCl/kg starch, and then acetylated with acetic acid anhydride. The carboxyl, carbonyl, acetyl groups were determined in modified starches. Structural properties of starch granules were evaluated based on gelatinisation, crystallinity, specific surface, intrinsic viscosity, and microphotographs by SEM microscope. The electron paramagnetic resonance (EPR) measurements were carried out to establish starch susceptibility to radical creation upon chemical modification and UV radiation. The amount of formed radicals was treated as a measure of the starch structure stability. The higher amount of amylose and the highest level of oxidation led to strong starch structure destruction and consequently facilitated radical generation. Study results showed also that amylose content as well as the degree of starch oxidation modified consecutive acetylation process. The different effectiveness of the acetylation processes influenced the morphology and structure of starch granules.

How to improve root canal filling in teeth subjected to radiation therapy for cancer

Abstract The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Canals were prepared with Reciproc-R50 and subdivided (n=10) for final irrigation (NaOCl, EDTA, chitosan) and filled. Three dentin slices were obtained from each root third. The first slice of each third was selected for BS evaluation, and the failure mode was determined by stereomicroscopy. SEM analysis of the sealer-dentin interface was performed in the remaining slices. Two-way ANOVA and Tukey's tests (α=0.05) were used. Lower BS (P<0.0001) was obtained after irradiation (2.07±0.79 MPa), regardless of the final irrigation solution used. The NaOCl group (P<0.001) had the lowest BS in the irradiated (1.68±0.72) and non-irradiated (2.39±0.89) groups, whereas the EDTA (irradiated: 2.14±0.77 and non-irradiated: 3.92±1.54) and chitosan (irradiated: 2.37±0.73 and non-irradiated: 3.51±1.47) groups demonstrated a higher BS (P<0.05). The highest values were observed in the coronal third (3.17±1.38) when compared to the middle (2.74±1.36) and apical ones (2.09±0.97)(P<0.0001). There were more cohesive failures and more gaps in irradiated specimens, regardless of the final solution. The present study showed that radiation was associated with a decrease in BS, regardless of the final solution used, whereas chitosan increased BS in teeth subjected to radiation therapy.

Determination of residual parachloroaniline produced by endodontic treatment after the use of 5% sodium hypochlorite and 2% chlorhexidine combined: an ex-vivo study

ABSTRACT: Aim: The objective of this work was to determine the concentrations of irrigating solutions and the residual content of parachloroaniline (PCA) formed after endodontic irrigation, using 5% NaOCl, 0.9% NaCl, 10% EDTA and 2% CHX 2%. Methodology Twenty premolars were used and 13 samples were collected per tooth from each of the treatment phases. Samples of: NaOCl, EDTA, CHX and PCA were quantified by UV and visible spectrophotometry. Results: Sodium hypochlorite decreased its concentration from 3.8% to 3.4% in phases 1 to 4. In phases 5, 6 and 7, residual NaOCl was measured with concentrations of 0.007%, 0.003% and 0.001% %. The concentration of EDTA decreased to 8.85% in phase 8. In phases 9, 10 and 11, irrigated with serum, EDTA was quantified with concentrations of 0.013% to 0.002% and NaOCl values of 0.0011% to 0, 0006%. In phases 12 and 13, CHX concentrations were 1.850% and 1.812% and PCA values were 0.0005% and 0.0007%. PCA formation occurred in presence of 2% CHX and residual NaClO and was detected colorimetrically in phases 12 and 13. Conclusions. During endodontic irrigation the concentration of 5% NaOCl decreases significantly in the first four phases and the concentrations of EDTA and CHX also decrease. There is PCA training in the last stages of the procedure.

An in vitro study on the efficacy of removing calcium hydroxide from curved root canal systems in root canal therapy.

To compare the efficacy of various irrigants (citric acid, ethylenediaminetetraacetic acid (EDTA) and NaOCl) and techniques in removing Ca(OH)2 in two types of curved root canal systems, simulated root canals with specific curvatures were used to investigate the effects of different irrigants and instruments on Ca(OH)2 removal. The optimal methods were verified on extracted human teeth. Simulated root canals were assigned to one of two groups based on the irrigation solution: 10% citric acid or 2.5% NaOCl. Each group was divided into four subgroups according to the technique used to remove Ca(OH)2. The percentage of Ca(OH)2 removal in different sections of root canals was calculated. On the basis of the results obtained for the simulated canals, 10% citric acid and 17% EDTA were applied to remove Ca(OH)2 from the extracted human teeth with curved root canal systems. The teeth were scanned by micro computed tomography to calculate the percentage of Ca(OH)2 removal in the canals. In simulated root canals, we found that 10% citric acid removed more Ca(OH)2 than 2.5% NaOCl in the 0-1 mm group from the apex level (P<0.05). Ultrasonic and EndoActivator activation significantly removed more Ca(OH)2 than a size 30 K file in the apical third (P<0.05). However, there were no significant differences in any sections of the canals for 10% citric acid or 17% EDTA in removing Ca(OH)2 in extracted human teeth. We concluded that it was effective to remove residual Ca(OH)2 using the decalcifying solution with EndoActivator or Passive Ultrasonic Irrigation in a curved root canal system. A protocol for Ca(OH)2 removal was provided based on the conclusions of this study and the methods recommended in previous studies.

Influence of root dentin treatment on the push-out bond strength of fibre-reinforced posts

This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.

Double dye technique and fluid filtration test to evaluate early sealing ability of an endodontic sealer.

OBJECTIVES: The aim of the present study is to evaluate the possible correlation between sealer penetration into dentinal tubules and sealing ability both in presence and absence of smear layer. MATERIALS AND METHODS: Fourteen maxillary central incisors were treated with 5.25 % NaOCl +10 % EDTA to remove the smear layer (SL-free group) or 5.25 % NaOCl without EDTA (SL group). Root canals were filled using #25 Thermafil Obturators with Topseal sealer labelled with 0.1 wt% rhodamine B. Sealing ability was measured as fluid filtration rate with a fluid-flow meter using water supplemented with 0.3 % calcein fluorescent dye. Specimens were sectioned, observed under confocal microscope to co-localize the presence of sealer (rhodamine B labelling) into dentinal tubules and gaps (calcein labelling) into the root canal. The depth of sealer penetration into dentinal tubules and the percentage of sealer penetration around the root canal were measured at 3, 5 and 8 mm from the apex. RESULTS: No significant differences between groups were observed in fluid filtration rate nor in depth of calcein penetration. Sealer penetration depth and percentage into dentinal tubules were not significantly different between groups, except at 8-mm level in absence of smear layer. CONCLUSION: Sealer penetration at 3- and 5-mm levels was not influenced by smear layer while it was significantly reduced at 8-mm level. Fluid filtration rate was not correlated either with depth of calcein penetration nor with sealer penetration into dentinal tubules. CLINICAL RELEVANCE: The sealing ability of Topseal sealer is not affected by presence or absence of smear layer.

Influence of root dentin treatment on the push-out bond strength of fibre-reinforced posts

Abstract This study evaluates the influence of root dentin treatment with NaOCl alone and combined with EDTA, with and without ultrasound activation, on the push-out bond strength (BS) of fiber-reinforced posts in weakened roots, cemented with RelyX or Panavia. The root canals of 42 maxillary canines were instrumented with Reciproc and 2.5% NaOCl. In the coronal 12mm of all canals, experimental weakening of the roots was produced by reducing dentin thickness with 2.44mm diameter diamond burs. The roots were assigned to 3 groups (n = 14) according to root dentin treatment: 2.5% NaOCl; 2.5% NaOCl + 17% EDTA; and 2.5% NaOCl + 17% EDTA, with solutions agitated using passive ultrasonic irrigation. After cementation of the fiber-reinforced posts the roots were divided in thirds. The first slice of each third was used for the push-out BS test, the second slice for confocal laser scanning microscopy and dentin microhardness (Knoop) analysis. Data were analysed by a two-way ANOVA and Tukey test (a = 0.05). NaOCl + EDTA provided highest BS values than NaOCl (p < 0.0001). Specimens cemented with Panavia presented significantly higher BS than those with RelyX in the three root thirds (p < 0.0001). The highest BS values occurred in the cervical third (p < 0.001). Ultrasound-activated NaOCl + EDTA promoted the greatest reduction in dentin microhardness, followed by NaOCl/EDTA and NaOCl. Ultrasonic activation of NaOCl and EDTA reduced root dentin microhardness, but did not improve the push-out BS of resin-based cements. Panavia presented higher BS than RelyX. RelyX was not influenced by the root dentin treatment protocols.

Efficacy of ultrasonic activation of NaOCl and orange oil in removing filling material from mesial canals of mandibular molars with and without isthmus

Objectives The aim of this study was to evaluate the volume of remaining filling material after passive ultrasonic irrigation (PUI) of sodium hypochlorite (NaOCl) and orange oil in mesial canals of mandibular molars, with and without isthmus. Material and Methods Thirty mesial roots of mandibular molars were divided according to the presence or absence of isthmus. Canals were prepared and filled (Micro-CT #1). Filling was removed using rotary instruments, and specimens were sub-divided into three groups according to the irrigation procedures: Conventional – conventional irrigation with NaOCl, PUI/NaOCl – PUI of NaOCl (three activations, 20 seconds each), and PUI/orange oil – PUI of orange oil (Micro-CT#2). Specimens were enlarged using the X2 and X3 ProTaper Next instruments and submitted to the same irrigation protocols (Micro-CT #3). Results No differences were found between the experimental groups in each stage of assessment (P>0.05). The volume of residual filling material was similar to that in Micro-CT #2 and Micro-CT #3, but lower than that observed in Micro-CT #1 (P<0.05). When groups were pooled according to the presence or absence of an isthmus, volume of residual filling material was higher in specimens presenting isthmus (P<0.05). Conclusions PUI of NaOCl or orange oil did not improve filling removal. Isthmus consists in an anatomical obstacle that impairs the removal of filling material.

Sodium hypochlorite oxidation of petroleum aliphatic contaminants in calcareous soils.

This research project investigated the sodium hypochlorite (NaClO) oxidation of aliphatic petroleum contaminants (C10-C50) in a calcareous soil (average 5473 ppm C10-C50, 15 wt% Ca), which had been excavated from a contaminated industrial site. The decontamination objective was to lower the C10-C50 concentration to 700 ppm. CO2 acidity was used in the project to boost the NaClO oxidation yield and seems to have played a role in desorbing the natural organic matter. The experimental conditions were a 2- to 16-h reaction time, at room temperature, with a 1 to 12.5 wt% NaClO oxidative solution and a fixed 2:1 solution-to-soil ratio. With a 3 wt% NaClO solution and with a CO2 overhead, the NaClO dosage requirement was maintained below 60 g NaClO/g of oxidized C10-C50 over the entire decontamination range. The strong chlorine smell remaining after the reaction was completed suggests that part of the NaClO requirement can be recycled. Except traces of chloroform, there were no regulation-listed organochloride contaminants detected on either the treated soil samples or leachates and the total count of chlorinated compounds in treated soil samples was below the detection limit of 250 mg/kg. The NaClO oxidation mechanism on aliphatic substrates might be triggered by transition metals, such as manganese, but no attempt has been made to investigate the oxidation mechanism. Further investigations would include a constant-fed NaClO system and other techniques to lower the required NaClO dosage.

Effect of gaseous ozone on Enterococcus faecalis biofilm-an in vitro study.

OBJECTIVES: The aim of this study was to evaluate the antimicrobial effect of gaseous ozone compared to conventional methods against Enterococcus faecalis. MATERIALS AND METHODS: One hundred twenty-five teeth were infected by E. faecalis and were incubated for 72 h to form biofilm. Teeth were distributed among five groups. In the first group, ozone was used; in the second group, teeth were rinsed with 20 % ethylenediaminetetraacetic acid (EDTA); in the third group, with 3 % sodium hypochlorite (NaOCl). Group 4 combined 20 % EDTA with ozone. NaOCl and ozone were combined in group 5. After treatment, the samples with paper points were taken, followed by dentin samples taken with K-file, and cultured for 24 h. Then bacterial colonies were counted. RESULTS: All treatments reduced significantly (p < 0.05) the bacteria. Paper points' samples showed 85.38 % reduction after ozone. The highest reduction was observed in NaOCl group (99.98 %). EDTA reduced bacteria by 80.64 %. Combination of NaOCl and ozone eradicated 99.95 % of the bacteria. Combination of EDTA and ozone reduced E. faecalis up to 91.33 %. The dentin chips showed the following: the highest CFU counts were observed in EDTA group, followed by ozone and NaOCl group. The lowest CFU counts were found in NaOCl-ozone group and EDTA-ozone group. CONCLUSIONS: Ozone reduced E. faecalis, even organised in a biofilm, however, lower than NaOCl. No treatment reduced totally the bacteria. CLINICAL RELEVANCE: Used as an adjuvant, ozone can increase the efficacy of conventional rinsing like EDTA and presents an alternative treatment when NaOCl cannot be used e.g. in teeth with a wide-open apical foramen.

Efficacy of ultrasonic activation of NaOCl and orange oil in removing filling material from mesial canals of mandibular molars with and without isthmus.

OBJECTIVES: The aim of this study was to evaluate the volume of remaining filling material after passive ultrasonic irrigation (PUI) of sodium hypochlorite (NaOCl) and orange oil in mesial canals of mandibular molars, with and without isthmus. MATERIAL AND METHODS: Thirty mesial roots of mandibular molars were divided according to the presence or absence of isthmus. Canals were prepared and filled (Micro-CT #1). Filling was removed using rotary instruments, and specimens were sub-divided into three groups according to the irrigation procedures: Conventional - conventional irrigation with NaOCl, PUI/NaOCl - PUI of NaOCl (three activations, 20 seconds each), and PUI/orange oil - PUI of orange oil (Micro-CT#2). Specimens were enlarged using the X2 and X3 ProTaper Next instruments and submitted to the same irrigation protocols (Micro-CT #3). RESULTS: No differences were found between the experimental groups in each stage of assessment (P>0.05). The volume of residual filling material was similar to that in Micro-CT #2 and Micro-CT #3, but lower than that observed in Micro-CT #1 (P<0.05). When groups were pooled according to the presence or absence of an isthmus, volume of residual filling material was higher in specimens presenting isthmus (P<0.05). CONCLUSIONS: PUI of NaOCl or orange oil did not improve filling removal. Isthmus consists in an anatomical obstacle that impairs the removal of filling material.

Disinfection of herbal spa pool using combined chlorine dioxide and sodium hypochlorite treatment.

The presence of pathogenic microorganisms in public spa pools poses a serious threat to human health. The problem is particularly acute in herbal spas, in which the herbs and microorganisms may interact and produce undesirable consequences. Accordingly, the present study investigated the effectiveness of a combined disinfectant containing chlorine dioxide and sodium hypochlorite in improving the water quality of a public herbal spa in Taiwan. Water samples were collected from the spa pool and laboratory tests were then performed to measure the variation over time of the microorganism content (total CFU and total coliforms) and residual disinfectant content given a single disinfection mode (SDM) with disinfectant concentrations of 5.2 × 10, 6.29 × 10, 7.4 × 10, and 11.4 × 10(-5) N, respectively. Utilizing the experience gained from the laboratory tests, a further series of on-site investigations was performed using three different disinfection modes, namely SDM, 3DM (once every 3 h disinfection mode), and 2DM (once every 2 h disinfection mode). The laboratory results showed that for all four disinfectant concentrations, the CFU concentration reduced for the first 6 h following SDM treatment, but then increased. Moreover, the ANOVA results showed that the sample treated with the highest disinfectant concentration (11.4 × 10(-5) N) exhibited the lowest rate of increase in the CFU concentration. In addition, the on-site test results showed that 3DM and 2DM treatments with disinfectant concentrations in excess of 9.3 × 10 and 5.5 × 10(-5) N, respectively, provided an effective reduction in the total CFU concentration. In conclusion, the experimental results presented in this study provide a useful source of reference for spa businesses seeking to improve the water quality of their spa pools.

Comparison of different dentin pretreatment protocols on the bond strength of glass fiber post using self-etching adhesive.

INTRODUCTION: This study compared the influence of different irrigants with and without ultrasound or laser irradiation on the bond strength of glass fiber posts using a self-etching adhesive in a supplementary dentin pretreatment. METHODS: Ninety bovine incisor roots were divided into 3 groups according to the irrigant tested: 2% chlorhexidine (CHX) (n = 30); 2.5% sodium hypochlorite (NaOCl) (n = 30), and saline solution (control) (n = 30). Each group was randomly divided into 3 subgroups according to the supplementary dentin pretreatment: ultrasound, Nd:YAG laser, and nonsupplemented (control). A self-etching adhesive system (Futurabond DC; VOCO GmbH, Cuxhaven, Germany) was used, and the glass fiber posts were cemented with dual-cure epoxy-based luting agent (Bifix QM, VOCO GmbH). All roots were sectioned transversely, and the push-out test was performed. Failure mode analysis was also evaluated. RESULTS: Bond strength decreased significantly after the use of 2.5% NaOCl in all root thirds (P < .05). CHX showed no difference in the mean bond strength value compared with saline solution (P > .05). The supplementary dentin pretreatment using the Nd:YAG laser or ultrasound did not improve the bond strength values for both NaOCl and CHX (P > .05). Moreover, the apical third exhibited the lowest mean bond strength values (P < .05). Analysis indicated that the predominant failure mode was the mixed type. CONCLUSIONS: Regardless of the irrigant used, the supplementary dentin pretreatment with ultrasound or laser irradiation showed no improvement in bond strength. Also, the use of NaOCl decreased the bond strength of glass fiber posts using a self-etching adhesive system, whereas CHX preserved it.