Combining thermosonication microstress and pineapple peel extract addition to achieve quality and post-acidification control in yogurt fermentation.

This work investigated the effects of the combined use of thermosonication-preconditioned lactic acid bacteria (LAB) with the addition of ultrasound-assisted pineapple peel extracts (UU group) on the post-acidification potential, physicochemical and functional qualities of yogurt products, aimed at achieving prolonged preservation and enhancing functional attributes. Accordingly, the physical-chemical features, adhesion properties, and sensory profiles, acidification kinetics, the contents of major organic acids, and antioxidant activities of the differentially processed yogurts during refrigeration were characterized. Following a 14-day chilled storage process, UU group exhibited acidity levels of 0.5-2 oT lower than the control group and a higher lactose content of 0.07 mg/ml as well as unmodified adhesion potential, indicating that the proposed combination method efficiently inhibited post-acidification and delayed lactose metabolism without leading to significant impairment of the probiotic properties. The results of physicochemical analysis showed no significant changes in viscosity, hardness, and color of yogurt. Furthermore, the total phenolic content of UU-treated samples was 98 µg/mL, 1.78 times higher than that of the control, corresponding with the significantly lower IC50 values of DPPH and ABTS radical scavenging activities of the UU group than those of the control group. Observations by fluorescence inverted microscopy demonstrated the obvious adhesion phenomenon with no significant difference found among differentially prepared yogurts. The results of targeted metabolomics indicated the proposed combination strategy significantly modified the microbial metabolism, leading to the delayed utilization of lactose and the inhibited conversion into glucose during post-fermentation, as well as the decreased lactic acid production and a notable shift towards the formation of relatively weak acids such as succinic acid and citric acid. This study confirmed the feasibility of thermosonication-preconditioned LAB inocula, in combination with the use of natural active components from fruit processing byproducts, to alleviate post-acidification in yogurt and to enhance its antioxidant activities as well as simultaneously maintaining sensory features.

Can a Fraction of Flour and Sugar Be Replaced with Fruit By-Product Extracts in a Gluten-Free and Vegan Cookie Recipe?

Certain food by-products, including not-good-for-sale apples and pomegranate peels, are rich in bioactive molecules that can be collected and reused in food formulations. Their extracts, rich in pectin and antioxidant compounds, were obtained using hydrodynamic cavitation (HC), a green, efficient, and scalable extraction technique. The extracts were chemically and physically characterized and used in gluten-free and vegan cookie formulations to replace part of the flour and sugar to study whether they can mimic the role of these ingredients. The amount of flour + sugar removed and replaced with extracts was 5% and 10% of the total. Physical (dimensions, color, hardness, moisture content, water activity), chemical (total phenolic content, DPPH radical-scavenging activity), and sensory characteristics of cookie samples were studied. Cookies supplemented with the apple extract were endowed with similar or better characteristics compared to control cookies: high spread ratio, similar color, and similar sensory characteristics. In contrast, the pomegranate peel extract enriched the cookies in antioxidant molecules but significantly changed their physical and sensory characteristics: high hardness value, different color, and a bitter and astringent taste. HC emerged as a feasible technique to enable the biofortification of consumer products at a real scale with extracts from agri-food by-products.

Thermomechanical transitions of meat-analog based fried foods batter coating.

This study aimed to characterize the thermomechanical transitions of meat-analog (MA) based coated fried foods. Wheat and rice flour-based batters were used to coat the MA and fried at 180 °C in canola oil for 2, 4 and 6 min. Glass-transition-temperature (Tg) of the coatings were assessed by differential scanning calorimetry, directly after frying or after post-fry holding. Mechanical texture analyzer and X-ray microtomography were employed to assess textural attributes and internal microstructure, respectively. Batter-formulation substantially impacted the Tg of fried foods coating i.e., crust. Tg of fried foods crust were ranged between -20 °C to -24 °C. Tg was positively correlated with frying time and internal microporosity (%), whereas negatively correlated with moisture content. Internal microstructure greatly influenced the textural attributes (hardness, brittleness, crispiness). Post-fry textural stability considerably impacted by Tg. Negative Tg value explains post-fry textural changes (hard-to-soft, brittle-to-ductile, crispy-to-soggy) of MA-based coated products at room-temperature (25 °C) and under IR-heating (65 °C).

Exploring the microbiome of coffee plants: Implications for coffee quality and production.

Coffee stands as one of the world's most popular beverages, and its quality undergoes the influence of numerous pre- and post-harvest procedures. These encompass genetic variety, cultivation environment, management practices, harvesting methods, and post-harvest processing. Notably, microbial communities active during fermentation hold substantial sway over the ultimate quality and sensory characteristics of the final product. The interaction between plants and microorganisms assumes critical significance, with specific microbes assuming pivotal roles in coffee plant growth, fruit development, and, subsequently, the fruit's quality. Microbial activities can synthesize or degrade compounds that influence the sensory profile of the beverage. However, studies on the metabolic products generated by various coffee-related microorganisms and their chemical functionality, especially in building sensory profiles, remain scarce. The primary aim of this study was to conduct a literature review, based on a narrative methodology, on the current understanding of the plant-microorganism interaction in coffee production. Additionally, it aimed to explore the impacts of microorganisms on plant growth, fruit production, and the fermentation processes, directly influencing the ultimate quality of the coffee beverage. Articles were sourced from ScienceDirect, Scopus, Web of Science, and Google Scholar using specific search terms such as "coffee microorganisms", "microorganisms-coffee interactions", "coffee fermentation", "coffee quality", and 'coffee post-harvest processing". The articles used were published in English between 2000 and 2023. Selection criteria involved thoroughly examining articles to ensure their inclusion was based on results about the contribution of microorganisms to both the production and quality of the coffee beverage. The exploration of microorganisms associated with the coffee plant and its fruit presents opportunities for bioprospecting, potentially leading to targeted fermentations via starter cultures, consequently generating new profiles. This study synthesizes existing data on the current understanding of the coffee-associated microbiome, its functionalities within ecosystems, the metabolic products generated by microorganisms, and their impacts on fermentation processes and grain and beverage quality. It highlights the importance of plant-microorganism interactions in the coffee production chain.

Dual-Stage ultrasound in deep frying of potato chips; effects on the oil absorption and the quality of fried chips.

Potato chips are popular high-consuming ready-to-eat meals in all of the world which specially attract a lot of attention from youth and children. Reducing oil absorption and improving the quality of chips are major undertakings within the industry. This research aimed to find the best ultrasonic bath-based method by investigating the optimal ultrasonic pre-treatment and developing an ultrasound (US) assisted frying system (UAFS) to reduce the oil absorption of potato chips while maintaining an acceptable quality. Through this technique, the potato chips get sonicated during deep frying in hot oil. US-pretreatment at temperatures of 25 °C and 73 °C, along with US-assisted frying, resulted in the minimal amount of oil which may be due to the US creating potential pores during the pre-treatment phase, which then expand further during the subsequent sonication stage. UAFS in combination with US-pretreatment produced more crispy chips due to the fact that the texture of potato slices becomes more porous. UAFS resulted in a decrease in the moisture content of the fried chips attributed to an increase in the effective diffusion coefficient and mass. Pretreating the chips at 73 °C significantly reduce the color change producing brighter product by inactivation of enzymes such as polyphenol oxidase. Finally, the result of TOPSIS optimization based on potato chips properties confirms that US-pretreatment in 73 °C brine followed by frying using UAFS is the best approach. Scanning electron microscope (SEM) images of potato chips also support this issue.

Effects of food processing on in vitro glucose release of high methylester pectin-enriched doughs.

The incidence of type 2 diabetes is linked to consuming processed, high-glycemic foods low in dietary fiber. Soluble dietary fibers are known to improve blood glucose tolerance. This study examined the impact of processing on the in vitro glucose release of fiber-rich, high-glycemic foods. The impact of composition and microstructure on in vitro glucose release and starch digestibility was evaluated in doughs - untreated, baked at 180 °C, and extruded at 150 °C and 180 °C - with partial enrichment of high-methylester pectin. Pectin enrichment decreased starch digestibility, altered the food matrix, and doubled in vitro chyme-viscosity resulting in reduced glucose release in baked (180 °C), and extruded (150 °C) products. Baking or extrusion cooking increased starch digestibility - converting slowly into rapidly available starch and free glucose. Additionally, resistant starch levels were enhanced by up to fivefold. The variations in glucose release originated from a complex interplay between starch digestibility, viscosity, and the food matrix.

Fava bean (Vicia faba L.) protein concentrate added to beef burgers improves the bioaccessibility of some free essential amino acids after in vitro oral and gastrointestinal digestion.

The influence of partial replacement of animal protein by plant-based ingredients on the protein digestibility of beef burgers was investigated. Beef burgers were supplemented with fava bean protein concentrate (FB) or a mixture of FB and flaxseed flour (FBFS), both processed by extrusion, at different levels: 0 (control), 10, 15, and 20 % (w/w). A pilot sensory analysis was conducted to select the percentage of flour inclusion for further assays: control, 10 % FB, and 10 % FBFS. Protein digestibility, amino acid profile, and protein secondary structure of these burgers after in vitro oral and gastrointestinal digestion were studied. In vitro boluses were prepared with the AM2 masticator, simulating normal mastication, and static in vitro digestion of boluses was performed according to the INFOGEST method. Inclusion of 10 % FB in beef burgers did not alter their flavour or tenderness compared to the control, whereas tenderness and juiciness scored slightly higher for the 10 % FBFS burgers compared to 15 % and 20 % FBFS ones. Poor lipid oxidative stability during storage was observed with 10 % FBFS burgers. Total protein content was significantly higher (p < 0.05) in 10 % FB burgers than in control burgers after in vitro oral digestion. Additionally, 10 % FB burgers presented higher amounts of free essential amino acids like isoleucine, leucine, phenylalanine, and valine at the end of digestion, as well as methionine, tyrosine, and histidine. Partial substitution of meat protein by 10 % FB improves the nutritional profile of beef burgers, without altering their sensory qualities.

Effects of ultra-high pressure, thermal pasteurization, and ultra-high temperature sterilization on color and nutritional components of freshly-squeezed lettuce juice.

The aim of this study was to evaluate the effects of ultra-high pressure (UHP, 600 MPa/2 min), thermal pasteurization (TP, 95 °C/1 min) and ultra-high temperature (UHT, 115 °C/5 s) sterilization on the color, sensory evaluation, microorganisms, physicochemical characteristics and nutritional components of freshly-squeezed lettuce juice (FLJ). Results showed that three sterilization methods demonstrated desirable inactivation effects on total aerobic bacteria, yeast and mold, and there were no significant changes in the main nutritional components, including ash, protein, carbohydrate and total dietary fiber. However, UHT and TP significantly affected the color of FLJ from bright green to light brown and made chlorophyll, ß-carotene and vitamins (VE, VC, VK1, VB6, VB12, and folic acid) contents markedly decreased. By contrast, UHP maintained the original color, fresh-like sensory qualities, vitamins, and carotene of FLJ to the greatest extent. Our results provide a promising application of UHP in the large-scale processing of FLJ.

Combined treatment of pulsed light and nisin-organic acid based antimicrobial wash for inactivation of Escherichia coli O157:H7 in Romaine lettuce, reduction of microbial loads, and retention of quality.

Microbial safety of fresh produce continues to be a major concern. Novel antimicrobial methods are needed to minimize the risk of contamination. This study investigated the antimicrobial efficacy of pulsed light (PL), a novel nisin-organic acid based antimicrobial wash (AW) and the synergy thereof in inactivating E. coli O157:H7 on Romaine lettuce. Treatment effects on background microbiota and produce quality during storage at 4 °C for 7 days was also investigated. A bacterial cocktail containing three outbreak strains of E. coli O157:H7 was used as inoculum. Lettuce leaves were spot inoculated on the surface before treating with PL (1-60 s), AW (2 min) or combinations of PL with AW. PL treatment for 10 s, equivalent to fluence dose of 10.5 J/cm2, was optimal and resulted in 2.3 log CFU/g reduction of E. coli O157:H7, while a 2 min AW treatment, provided a comparable pathogen reduction of 2.2 log CFU/g. Two possible treatment sequences of PL and AW combinations were investigated. For PL-AW combination, inoculated lettuce leaves were initially exposed to optimum PL dose followed by 2 min AW treatment, whereas for AW-PL combination, inoculated lettuce were subjected to 2 min AW treatment prior to 10 s PL treatment. Both combination treatments (PL-AW and AW-PL) resulted in synergistic inactivation as E. coli cells were not detectable after treatment, indicating >5 log pathogen reductions. Combination treatments significantly (P < 0.05) reduced spoilage microbial populations on Romaine lettuce and also hindered their growth in storage for 7 days. The firmness and visual quality appearance of lettuce were not significantly (P > 0.05) influenced due to combination treatments. Overall, the results reveal that PL and AW combination treatments can be implemented as a novel approach to enhance microbial safety, quality and shelf life of Romaine lettuce.

The Frying Stability of Oleogel Made from Rice Bran Wax and Sunflower Oil During Intermittent Frying of Potato Chips.

There is a need for an alternative method of producing a vegetable oil with high levels of unsaturated fatty acids and physical properties similar to solid fat. The objective of current work was to cut down the amount of oil absorbed by the finished product, increase the frying stability of sunflower oil, and fry potato chips using oleogel without harming their sensory quality. Rice bran wax was applied in this experiment, at rates of 2, 4, and 6 weight percent, and the generated oleogels were then utilized for four days in a succession to fry potato chips for four hours each day. The results suggested that potato chips could be fried using the sunflower oil-rice bran wax oleogel without having an adverse effect on their texture, color, or quality. Furthermore, the produced oleogel was more robust during frying than liquid sunflower oil. During intermittent frying, SFA levels also marginally rose in all samples with the exception of 4% oleogel. The control sample, which was sunflower oil, had the lowest levels of unsaturated fatty acids and poly unsaturated fatty acids at the end of the frying operation. The percentage of oil uptake by the potato chips in the oleogels containing 4 and 2% rice bran wax, on the other hand, was lower than in the control sample. The findings suggested that oleogels could be used as a deep-fat frying medium in household, commercial, and industrial settings.

Development of thermoultrasound assisted blanching to improve enzyme inactivation efficiency, drying characteristics, energy consumption, and physiochemical properties of sweet potatoes.

Thermoultrasound (USB) as a promising alternative to traditional hot water (HWB) blanching was employed to blanch sweet potatoes and its influence on enzyme activity, drying behavior, energy consumption and physiochemical properties of sweet potatoes were investigated. Results showed that successive increases in blanching temperature and time resulted in significant (p < 0.05) decreases in PPO and POD activities. Compared to HWB, USB led to more effective drying by promoting texture softening, moisture diffusion, microstructure alterations, and microchannels formation, which significantly reduced energy consumption and improved the overall quality of the dried sample. Specifically, USB at 65 °C for 15 min improved water holding capacity and ABTS, while USB at 65 °C for 30 min improved color (more red and yellow), total phenolic content, total carotenoid content, and DPPH. Unfortunately, blanching process showed detrimental effects on the amino acid composition of dried samples. Overall, the development of thermoultrasound assisted blanching for sweet potatoes has the potential to revolutionize the processing and production of high-quality sweet potato products, while also improving the sustainability of food processing operations.

Simultaneous mitigation of 3-monochloropropane 1,2 diol ester and glycidyl ester in edible oils: a review.

The rising concern about the presence of 3-monochloropropane 1,2 diol ester (3-MCPDE) and glycidyl ester (GE) in food has prompted much research to be conducted. Some process modifications and the use of specific chemicals have been employed to mitigate both 3-MCPDE and GE. Alkalisation using NaOH, KOH, alkali metals or alkaline earth metals and post sparging with steam or ethanol and short path distillation have shown simultaneous mitigation of 51-91% in 3-MCPDE and of 13-99% in GE, both contaminants achieved below 1000 µg/kg. Some of the mitigation methods have resulted in undesirable deterioration in other parameters of the refined oil. When the processed oil is used in food processing, it results in changes to 3-MCPDE and GE. Repeated deep frying above 170 °C in the presence of NaCl and baking at 200 °C with flavouring (dried garlic and onion), resulted in increased 3-MCPDE. Repeated frying in the presence of antioxidants (TBHQ, rosemary and phenolics) decreased 3-MCPDE in processed food. The GE content in foods tends to decline with time, indicating instability of GE's epoxide ring.

Peracetic acid application as an antimicrobial and its residual (HEDP): a holistic approach on the technological characteristics of chicken meat.

The most significant occurrence of food-borne diseases is due to Campylobacter and Salmonella contamination from chicken meat, and for this reason, strict regulations about strategies to improve the control of food pathogens are imposed by food safety authorities. Despite the efforts of poultry industry since the beginning of risk analysis and critical control point to reduce the burden of food-borne illness, technological barriers along the way are increasingly necessary to ensure safe food. The aim of this review was to carry out a scientific approach to the influence of peracetic acid (PAA) as an antimicrobial and its toxicological safety, in particular the stabilizer used in the formulation of PAA, 1-hydroxyethylidene 1,1-diphosphonic acid (HEDP), suggesting the possibility of researching the residual HEDP in meat, which would allow the approval of the PAA by the health authorities of several countries that still restrict it. This review also aims to ascertain the effectiveness of PAA, in different cuts and carcasses, by different application methods, comparing the effectiveness of this antimicrobial with other antimicrobials, and its exclusive or combined use, for the decontamination of poultry carcasses and raw parts. The literature results support the popularity of PAA as an effective intervention against pathogenic bacteria during poultry processing.

Global distribution, toxicity to humans and animals, biodegradation, and nutritional mitigation of deoxynivalenol: A review.

Deoxynivalenol (DON) is one of the main types of B trichothecenes, and it causes health-related issues in humans and animals and imposes considerable challenges to food and feed safety globally each year. This review investigates the global hazards of DON, describes the occurrence of DON in food and feed in different countries, and systematically uncovers the mechanisms of the various toxic effects of DON. For DON pollution, many treatments have been reported on the degradation of DON, and each of the treatments has different degradation efficacies and degrades DON by a distinct mechanism. These treatments include physical, chemical, and biological methods and mitigation strategies. Biodegradation methods include microorganisms, enzymes, and biological antifungal agents, which are of great research significance in food processing because of their high efficiency, low environmental hazards, and drug resistance. And we also reviewed the mechanisms of biodegradation methods of DON, the adsorption and antagonism effects of microorganisms, and the different chemical transformation mechanisms of enzymes. Moreover, nutritional mitigation including common nutrients (amino acids, fatty acids, vitamins, and microelements) and plant extracts was discussed in this review, and the mitigation mechanism of DON toxicity was elaborated from the biochemical point of view. These findings help explore various approaches to achieve the best efficiency and applicability, overcome DON pollution worldwide, ensure the sustainability and safety of food processing, and explore potential therapeutic options with the ability to reduce the deleterious effects of DON in humans and animals.

An Effective Sanitizer for Fresh Produce Production: In Situ Plasma-Activated Water Treatment Inactivates Pathogenic Bacteria and Maintains the Quality of Cucurbit Fruit.

The effect of plasma-activated water (PAW) generated with a dielectric barrier discharge diffusor (DBDD) system on microbial load and organoleptic quality of cucamelons was investigated and compared to the established sanitizer, sodium hypochlorite (NaOCl). Pathogenic serotypes of Escherichia coli, Salmonella enterica, and Listeria monocytogenes were inoculated onto the surface of cucamelons (6.5 log CFU g-1) and into the wash water (6 log CFU mL-1). PAW treatment involved 2 min in situ with water activated at 1,500 Hz and 120 V and air as the feed gas; NaOCl treatment was a wash with 100 ppm total chlorine; control treatment was a wash with tap water. PAW treatment produced a 3-log CFU g-1 reduction of pathogens on the cucamelon surface without negatively impacting quality or shelf life. NaOCl treatment reduced the pathogenic bacteria on the cucamelon surface by 3 to 4 log CFU g-1; however, this treatment also reduced fruit shelf life and quality. Both systems reduced 6-log CFU mL-1 pathogens in the wash water to below detectable limits. The critical role of superoxide anion radical (·O2-) in the antimicrobial power of DBDD-PAW was demonstrated through a Tiron scavenger assay, and chemistry modeling confirmed that ·O2- generation readily occurs in DBDD-PAW generated with the employed settings. Modeling of the physical forces produced during plasma treatment showed that bacteria likely experience strong local electric fields and polarization. We hypothesize that these physical effects synergize with reactive chemical species to produce the acute antimicrobial activity seen with the in situ PAW system. IMPORTANCE Plasma-activated water (PAW) is an emerging sanitizer in the fresh food industry, where food safety must be achieved without a thermal kill step. Here, we demonstrate PAW generated in situ to be a competitive sanitizer technology, providing a significant reduction of pathogenic and spoilage microorganisms while maintaining the quality and shelf life of the produce item. Our experimental results are supported by modeling of the plasma chemistry and applied physical forces, which show that the system can generate highly reactive ·O2- and strong electric fields that combine to produce potent antimicrobial power. In situ PAW has promise in industrial applications as it requires only low power (12 W), tap water, and air. Moreover, it does not produce toxic by-products or hazardous effluent waste, making it a sustainable solution for fresh food safety.

Identification and screening of novel diterpenoids from roasted arabica coffee in the regulation of lipid content in white adipocytes.

Previous studies have shown that coffee has a role in regulating lipid metabolism. However, the active compounds and pharmacological mechanism(s) are still unclear. Here, four new coffee diterpenoids (1-4) were identified from roasted arabica coffee (Coffea arabica L.) beans, and together with 31 known coffee diterpenoids (5-35), their bioactivities in the regulation of lipid content in white adipocytes were evaluated. Based on their structures and correlated bioactivities, we proposed that the α,ß-unsaturated-γ-lactone moiety and hydroxyl group at C-3 are required for the bioactivity. Furthermore, the pharmacological approaches revealed that the active new diterpenoid, dehydrocaffarolide B, inhibited the Akt/mTOR/GSK3ß pathway and arrested cells in the G0/G1 phase of the mitotic clonal expansion process during the adipocyte differentiation and maturation, eventually resulting in the blunting of lipid accumulation in the adipocytes. Collectively, our findings identified four new diterpenoids of arabica coffee and elucidated a mechanism of an active lactone-type diterpenoid in the regulation of lipid content in white adipocytes.

Toxicity, formation, contamination, determination and mitigation of acrylamide in thermally processed plant-based foods and herbal medicines: A review.

Thermal processing is one of the important techniques for most of the plant-based food and herb medicines before consumption and application in order to meet the specific requirement. The plant and herbs are rich in amino acids and reducing sugars, and thermal processing may lead to Maillard reaction, resulting as a high risk of acrylamide pollution. Acrylamide, an organic pollutant that can be absorbed by the body through the respiratory tract, digestive tract, skin and mucous membranes, has potential carcinogenicity, neurological, genetic, reproductive and developmental toxicity. Therefore, it is significant to conduct pollution determination and risk assessment for quality assurance and security of medication. This review demonstrates state-of-the-art research of acrylamide focusing on the toxicity, formation, contamination, determination, and mitigation in taking food and herb medicine, to provide reference for scientific processing and ensure the security of consumers.

Coffee fermentation process: A review.

In recent years, the importance of controlling coffee fermentation in the final quality of the beverage has been recognized. The literature review was conducted in the Science Direct and Springer databases, considering studies published in the last ten years, 74 references were selected. Several studies have been developed to evaluate and propose fermentation conditions that result in sensory improvements in coffee. So, this review aims to describe detailed the different protocols for conducting the coffee fermentation step and how they could influence the sensory quality of coffee based on the Specialty Coffee Association protocol. We propose a new way to identify coffee post-harvest processing not based on the already known wet, dry and semi-dry processing. The new identification is focused on considering fermentation as a step influenced by the coffee fruit treatment, availability of oxygen, water addition, and starter culture utilization. The findings of this survey showed that each type of coffee fermentation protocol can influence the microbiota development and consequently the coffee beverage. There is a migration from the use of processes in open environments to closed environments with controlled anaerobic conditions. However, it is not possible yet to define a single process capable of increasing coffee quality or developing a specific sensory pattern in any environmental condition. The use of starter cultures plays an important role in the sensory differentiation of coffee and can be influenced by the fermentation protocol applied. The application of fermentation protocols well defined is essential in order to have a good product also in terms of food safety. More research is needed to develop and implement environmental control conditions, such as temperature and aeration, to guarantee the reproducibility of the results.

Structural and functional properties and digital image texture analysis of gelatin, pectin, and carrageenan gels with honey addition.

Gels combined with honey might generate new possibilities of textures in food development. This work explores the structural and functional properties of gelatin (5 g/100 g), pectin (1 g/100 g), and carrageenan (1 g/100 g) gels with different content of honey (0-50 g/100 g). Honey decreased the transparency of gels and made them more yellow-greenish; all of them were firm and uniform, especially at the highest honey content. The water holding capacity increased (63.30-97.90 g/100 g) and moisture content, water activity (0.987-0.884) and syneresis (36.03-1.30 g/100 g) decreased with the addition of honey. This ingredient modified mainly the textural parameters of gelatin (Hardness: 0.82-1.35 N) and carrageenan gels (Hardness: 2.46-2.81 N), whereas only the adhesiveness and the liquid like-behavior were increased in the pectin gels. Honey increased the solid behavior of gelatin gels (G': 54.64-173.37 Pa) but did not modify the rheological parameters of the carrageenan ones. Honey also had a smoothing effect on the microstructure of gels as observed in the scanning electron microscopy micrographs. This effect was also confirmed by the results of the gray level co-occurrence matrix and fractal model's analysis (fractal dimension: 1.797-1.527; lacunarity: 1.687-0.322). The principal component and cluster analysis classified samples by the hydrocolloid used, except the gelatin gel with the highest content of honey, which was differentiated as a separate group. Honey modified the texture, rheology, and microstructure of gels indicating that it is possible to generate new products to be used in other food matrices as texturizers.

In vitro gas production kinetics are influenced by grain processing, flake density, starch retrogradation, and Aspergillus oryzae fermentation extract containing α-amylase activity.

Grain processing such as particle size, flake density, or starch retrogradation can influence ruminal degradability characteristics; however, it is unclear how exogenous α-amylase supplementation interacts with different processed grains. Four experiments were conducted to compare the effects of Aspergillus oryzae fermentation extract (Amaize; Alltech Biotechnology Inc., Nicholasville, KY) supplementation on in vitro gas production kinetics of grain substrates with different processing methods that are common in the feedlot industry. In experiment 1, corn processing (dry-rolled, high-moisture, steam-flaked) and Amaize supplementation (0 or 15 U α-amylase activity/100 mL) were evaluated in a 3 × 2 factorial arrangement of treatments. The rate of gas production for dry-rolled corn was higher (P < 0.001) with Amaize supplementation. In experiment 2, flake density (296, 322, 348, 373, and 399 g/L) and starch retrogradation (storage in heat-sealed foil bags for 3 d at 23 or 55°C) were evaluated in a 5 × 2 factorial arrangement of treatments. There was a flake density × starch retrogradation interaction (P < 0.01) for the rate of gas production because the decrease in the rate of gas production with starch retrogradation was greater at lighter flake densities compared with heavier flake densities. In experiment 3, Amaize supplementation was evaluated across flake densities of nonretrograded steam-flaked corn (stored at 23°C) used in experiment 2. There was a flake density × Amaize interaction (P < 0.01) for the rate of gas production where Amaize supplementation resulted in a lower rate of gas production at lighter flake densities (296, 322, and 348 g/L) but a higher rate of gas production at heavier flake densities (373 and 399 g/L). In experiment 4, Amaize supplementation was evaluated across flake densities of retrograded steam-flaked corn (stored at 55°C) used in experiment 2. Gas production was lower after 24 h with Amaize supplementation for retrograded flakes produced to a density of 322 and 399 g/L while Amaize supplementation did not influence gas production at 24 h at other flake densities. There was a flake density × Amaize interaction for the rate of gas production because Amaize supplementation resulted in a faster (P < 0.01) rate of gas production for all flake densities except retrograded flakes produced to a density of 296 g/L. Enzymatic starch availability was positively correlated with the rate of gas production. These data demonstrate that supplementation of 15 U/100 mL of Amaize resulted in greater rates of gas production for dry-rolled corn, corn steam-flaked to heavier densities, and retrograded steam-flaked corn.

Grain processing has been used for decades to improve digestibility of finishing cattle diets, leading to improved growth and feed efficiency. Grain processing methods that result in changes in particle size, flake density, or starch retrogradation have all been shown to affect the degradability characteristics of nutrients in the rumen. Supplementation of feed additives containing exogenous enzyme activity could have the potential to improve digestibility, growth performance, and feed efficiency of livestock. However, it is unknown how supplementation of exogenous α-amylase activity influences degradability characteristics of different processed grains. The objectives of this study were to compare the effects of Aspergillus oryzae fermentation extract supplementation on in vitro gas production kinetics of grain substrates with different processing methods that are common in the feedlot industry. Enzymatic starch availability of steam-flaked corn, but not dry-rolled or high-moisture corn, was reflective of the rate of in vitro gas production. Increasing flake density and increasing starch retrogradation decreased the rate of in vitro gas production. Supplementation of A. oryzae fermentation extract resulted in increased rates of gas production for dry-rolled corn, corn steam-flaked at heavier densities, and retrograded steam-flaked corn.