Insight into the Sorption of 5-Fluorouracil and Methotrexate onto Soil-pH, Ionic Strength, and Co-Contaminant Influence.

Nowadays anticancer drugs (ADs), like other pharmaceuticals, are recognized as new emerging pollutants, meaning that they are not commonly monitored in the environment; however, they have great potential to enter the environment and cause adverse effects there. The current scientific literature highlights the problem of their presence in the aquatic environment by publishing more and more results on their analytics and ecotoxicological evaluation. In order to properly assess the risk associated with the presence of ADs in the environment, it is also necessary to investigate the processes that are important in understanding the environmental fate of these compounds. However, the state of knowledge on mobility of ADs in the environment is still very limited. Therefore, the main aim of our study was to investigate the sorption potential of two anticancer drugs, 5-fluorouracil (5-FU) and methotrexate (MTX), onto different soils. Special attention was paid to the determination of the influence of pH and ionic strength as well as presence of co-contaminants (cadmium (Cd2+) and another pharmaceutical-metoprolol (MET)) on the sorption of 5-FU and MTX onto soil. The obtained distribution coefficient values (Kd) ranged from 2.52 to 6.36 L·kg-1 and from 6.79 to 12.94 L·kg-1 for 5-FU and MTX, respectively. Investigated compounds may be classified as slightly or low mobile in the soil matrix (depending on soil). 5-FU may be recognized as more mobile in comparison to MET. It was proved that presence of other soil contaminants may strongly influence their mobility in soil structures. The investigated co-contaminant (MET) caused around 25-fold increased sorption of 5-FU, whereas diminished sorption of MTX. Moreover, the influence of environmental conditions such as pH and ionic strength on their sorption has been clearly demonstrated.

Calycosin Influences the Metabolism of Five Probe Drugs in Rats.

BACKGROUND: Calycosin (CAL), a type of O-methylated isoflavone extracted from the herb Astralagusmembranaceus (AM), is a bioactive chemical with antioxidative, antiphlogistic and antineoplastic activities commonly used in traditional alternative Chinese medicine. AM has been shown to confer health benefits as an adjuvant in the treatment of a variety of diseases. AIM: The main objective of this study was to determine whether CAL influences the cytochrome P450 (CYP450) system involved in drug metabolism. METHODS: Midazolam, tolbutamide, omeprazole, metoprolol and phenacetin were selected as probe drugs. Rats were randomly divided into three groups, specifically, 5% Carboxymethyl cellulose (CMC) for 8 days (Control), 5% CMC for 7 days + CAL for 1 day (single CAL) and CAL for 8 days (conc CAL), and metabolism of the five probe drugs evaluated using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). RESULTS: No significant differences were observed for omeprazole and midazolam, compared to the control group. T max and t1/2 values of only one probe drug, phenacetin, in the conc CAL group were significantly different from those of the control group (T max h: 0.50±0.00 vs 0.23±0.15; control vs conc CAL). C max of tolbutamide was decreased about two-fold in the conc CAL treatment group (conc vs control: 219.48 vs 429.56, P<0.001). CONCLUSION: Calycosin inhibits the catalytic activities of CYP1A2, CYP2D6 and CYP2C9. Accordingly, we recommend caution, particularly when combining CAL as a modality therapy with drugs metabolized by CYP1A2, CYP2D6 and CYP2C9, to reduce the potential risks of drug accumulation or ineffective treatment.

Tuning down the environmental interests of organoclays for emerging pollutants: Pharmaceuticals in presence of electrolytes.

The impact of electrolytes on the adsorption of emerging pollutants: pharmaceuticals onto layered materials: a raw clay mineral and its nonionic and cationic organoclay derivatives was studied. The selected pharmaceuticals: amoxicillin, norfloxacin, sulfamethoxazole, metoprolol, carbamazepine, and trimethoprim show different electric charges: zwitterionic, anionic, cationic and neutral and hydrophobic character (different LogP). Without any salts, the set of complementary data obtained by UV and infrared spectroscopies, X-ray diffraction points out the importance of the electric charge which represents a key parameter in both the spontaneity and feasibility of the adsorption. In contrast, the hydrophobicity of the analytes plays a minor role but determines the magnitude of the adsorbed amount of pharmaceuticals onto organoclays. With a dual hydrophilic and hydrophobic behavior, nonionic organoclay appears to be the most polyvalent material for the removal of the pharmaceuticals. In the presence of electrolytes (NaCl at a concentration of 1 × 10-2 mol L-1), both nonionic and cationic organoclays show a decrease of their efficiencies, whereas the adsorption is particularly enhanced for Na-Mt except for the cationic species (trimethoprim and metoprolol). Thus, in realistic experimental conditions close to those of natural effluents, raw clay mineral appears as the most appropriate sorbent for the studied pharmaceuticals while it raises the question of the usefulness of organoclays in water remediation strategy.

Formulation and in vitro evaluation of directly compressed controlled release tablets designed from the Co-precipitates.

Controlled release dosage forms provide sustained therapeutics effects for prolonged period of time and improve patient compliance. In present study, controlled release co-precipitates of Metoprolol Tartrate and Losartan Potassium were prepared by solvent evaporation method using polymers such as Eudragit RL 100 and Carbopol 974PNF and controlled release tablets were directly compressed into tablets. In-vitro dissolution of controlled release co-precipitates were performed by USP Method-II (paddle method) and tablets were evaluated by USP Method-I (rotating basket method) in phosphate buffer (PH 6.8) using pharma test dissolution apparatus. The temperature was maintained constant at 37±1.0°C and the rotation speed of paddle and basket was kept constant at 100rpm. Drug release mechanisms were determined by applying Power Law kinetic model. The difference and similarity of dissolution profiles test formulations with reference standards were also determined by applying difference factor (f1) and similarity factor (f2). The results showed that the controlled release co-precipitates with polymer Eudragit RL 100 of both the drug extended the drug release rates for 10 hours and those having polymer Carbopol 974P NF extended the drug release rates for 12 hours. The controlled release tablets prepared from controlled release co-precipitates extended the drugs release up to 24 hours with both the polymers. The drug was released by all tests anomalous non fickian mechanism except F1 and F5 do not follow Power Law. The f1 and f2 values obtained were not in acceptable limits except F15 whose values were in acceptable limits. It is concluded from the present study that polymers (Eudragit RL 100 and Carbopol 974P NF) can be efficiently used in development of controlled release dosage forms having predictable kinetics.

Piecewise function parameters as responses of the design of experiment in the development of a pulsatile release chronopharmaceutical system.

The aim of this work was to develop a pulsatile release system with metoprolol for chronotherapeutical use by coating swellable mini-tablets with Eudragit RS. To study the influence of the formulation factors (amount of coating polymer, plasticizer percentage in film coating and swelling agent percentage in mini-tablets), a Box-Behnken design of experiment (DoE) was used. To evaluate the influence of the studied factors on the sigmoid shape of the dissolution profile, piecewise function parameters were used as the responses of DoE. The results show that higher concentrations of coating polymer and higher concentrations of plasticizer polymer led to a thicker and more elastic polymeric film, which led to a delay in drug release. Using the parameters of the piecewise function as DoE responses, an optimum formulation with a sigmoid shape dissolution profile and a 2.5-h lag time followed by rapid drug release were obtained.

Bilayer mucoadhesive microparticles for the delivery of metoprolol succinate: Formulation and evaluation.

Metoprolol succinate is a very potent drug for the treatment of hypertension but suffers from poor bioavailability due to its erratic absorption in lower GI tract. Therefore, in the present study, it was hypothesized that by formulating mucoadhesive particles, the residence time in the GIT and release of drug may be prolonged that will enhance the bioavailability of metoprolol succinate. Metoprolol succinate loaded chitosan microparticles were prepared by ionic gelation method. The optimized microparticles were coated with sodium alginate to form a layer over chitosan microparticles to increase the mucoadhesive strength and to release the drug in controlled manner. Coated and uncoated microparticles were evaluated for particle size, zeta potential, morphology, entrapment efficiency, drug loading and in vitro drug release. The coated microparticles showed comparatively less drug release in the 0.1 N HCl while sustained release in PBS (pH 6.8) as compared to uncoated microparticles. The in vivo study on albino rats demonstrated an increase in bioavailability of the coated microparticles as compared to marketed formulation. From the study it can be concluded that alginate coated chitosan microparticles could be a useful carrier for the oral delivery of metoprolol succinate.

Development of hollow/porous floating beads of metoprolol for pulsatile drug delivery.

The purpose of this work was to develop hollow calcium pectinate beads for floating pulsatile release of metoprolol tartrate intended for chronopharmacotherapy. Floating pulsatile concept was applied to increase the gastric residence of the dosage form having lag phase followed by a burst release. To overcome limitations of various approaches for imparting buoyancy, hollow/porous beads were prepared by simple process of acid-base reaction during ionotropic cross-linking using low methoxy pectin, xanthan gum, sodium carboxy methyl cellulose, guar gum, locust bean, gellan gum and calcium chloride as a cross-linking agent. Based on the preliminary studies optimized polymers were selected for formulation design with different polymers ratio concentrations. The obtained floating beads were studied for entrapment efficiency, buoyancy study, swelling index, surface morphology, in vitro release, stability studies and in vivo floating study. The floating beads obtained were porous, float up to 12-24 h. The radiological studies (X-rays) pointed out the capability of the system to release drug in lower parts of GIT after a programmed lag time for hypertension. The floating beads provided expected two-phase release pattern with initial lag time during floating in acidic medium followed by rapid pulse release in phosphate buffer. From the accelerated stability studies, it was observed that the formulations are quite stable. All formulations followed first-order release kinetics by diffusion mechanism. This approach suggested the use of hollow calcium pectinate microparticles as promising floating pulsatile drug delivery system for site- and time-specific release of drugs acting as per chronotherapy of diseases.