Bioactive and biodegradable cotton fabrics produced via synergic effect of plant extracts and essential oils in chitosan coating system.

Functional antibacterial textile materials are in great demand in the medical sector. In this paper, we propose a facile, eco-friendly approach to the design of antibacterial biodegradable cotton fabrics. Cotton fiber fabrics were enhanced with a chitosan coating loaded with plant extracts and essential oils. We employed Fourier-transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), UV-Vis spectrophotometry, optical microscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) to characterize the color, structure, and thermal properties of the modified fabrics. The fabrics were found to effectively induce growth inhibition of Gram-positive and Gram-negative bacteria, especially when a synergic system of aloe vera extract and cinnamon essential oil was applied in the coating formulation. Additionally, we observed significant color and weight changes after 5, 10, and 20 days in soil biodegradability tests. Given the straightforward modification process and the use of non-toxic natural materials, these innovative bio-based and biodegradable cotton fabrics show great promise as protective antimicrobial textiles for healthcare applications.

Association of a Skin Dressing Made With the Organic Part of Marine Sponges and Photobiomodulation on the Wound Healing in an Animal Model.

The present study aims to characterize and to evaluate the biological effects of a skin dressing manufactured with the organic part of the Chondrilla caribensis marine sponge (called spongin-like collagen (SC)) associated or not to photobiomodulation (PBM) on the skin wound healing of rats. Skin dressings were manufactured with SC and it was characterized using scanning electron microscopy (SEM) and a tensile assay. In order to evaluate its biological effects, an experimental model of cutaneous wounds was surgically performed. Eighteen rats were randomly distributed into three experimental groups: control group (CG): animals with skin wounds but without any treatment; marine collagen dressing group (DG): animals with skin wounds treated with marine collagen dressing; and the marine collagen dressing + PBM group (DPG): animals with skin wounds treated with marine collagen dressing and PBM. Histopathological, histomorphometric, and immunohistochemical evaluations (qualitative and semiquantitative) of COX2, TGFß, FGF, and VEGF were done. SEM demonstrates that the marine collagen dressing presented pores and interconnected fibers and adequate mechanical strength. Furthermore, in the microscopic analysis, an incomplete reepithelialization and the presence of granulation tissue with inflammatory infiltrate were observed in all experimental groups. In addition, foreign body was identified in the DG and DPG. COX2, TGFß, FGF, and VEGF immunostaining was observed predominantly in the wound area of all experimental groups, with a statistically significant difference for FGF immunostaining score of DPG in relation to CG. The marine collagen dressing presented adequate physical characteristics and its association with PBM presented favorable biological effects to the skin repair process.

Synergistic bactericidal effect and mechanism of ultrasound combined with Lauroyl Arginate Ethyl against Salmonella Typhimurium and its application in the preservation of onions.

In the present study, the synergistic bactericidal effect and mechanism of ultrasound (US) combined with Lauroyl Arginate Ethyl (LAE) against Salmonella Typhimurium were investigated. On this basis, the effect of US+LAE treatment on the washing of S. Typhimurium on the surface of onions and on the physical and chemical properties of onion during fresh-cutting and storage were studied. The results showed that treatment with US+LAE could significantly (P < 0.05) reduce the number of S. Typhimurium compared to US and LAE treatments alone, especially the treatment of US+LAE (230 W/cm2, 8 min, 71 µM) reduced S. Typhimurium by 8.82 log CFU/mL. Confocal laser scanning microscopy (CLSM), flow cytometry (FCM), protein and nucleic acid release and N-phenyl-l-naphthylamine (NPN) assays demonstrated that US+LAE disrupted the integrity and permeability of S. Typhimurium cell membranes. Reactive oxygen species (ROS) and malondialdehyde (MDA) assays indicated that US+LAE exacerbated oxidative stress and lipid peroxidation in cell membranes. Field emission scanning electron microscopy (FESEM) demonstrated that US+LAE treatment caused loss of cellular contents and led to cell crumpling and even lost the original cell morphology. US+LAE treatment caused a significant (P < 0.05) decrease in the number of S. Typhimurium on onions, but there was no significant (P > 0.05) effect on the color, hardness, weight and ascorbic acid content of onions. This study elucidated the synergistic antibacterial mechanism of US+LAE and verified the feasibility of bactericidal effect on the surface of onions, providing a theoretical basis for improving the safety of fresh produce in the food industry and to propose a new way to achieve the desired results.

Exploring microscopic pollen morphology in herbaceous Flora: Insights and analysis using scanning electron microscopy.

Microscopic techniques can be applied to solve taxonomic problems in the field of plant systematic and are extremely versatile in nature. This study was focused on the new approaches to visualizing the imaging, tool to cover the micro-structural techniques applied to the pollen study of flowers. The current research was proposed to evaluate microscopic pollen morphological attributes using light and scanning electron microscopy of herbaceous flora from Samarkand, Uzbekistan. A total of 13 herbaceous species, classified into 11 different families were collected, pressed, and identified, and then acetolyzed their pollen to visualize under light and scanning electron microscopy. Herbaceous flora can be characterized by small to very large-sized pollen morphotypes presenting four types of pollen shapes, prolate spheroidal (six species), spheroidal (three species) and prolate and oblate (two species each). The polar diameter and equatorial distance were calculated maximum in Hibiscus syriacus 110.55 and 111.2 µm respectively. Pollen of six different types was found namely tricolporate pollen observed in seven species, tricolpate and pantoporate in two species each, sulcate in Gagea olgae and hexacolpate pollen was examined in Salvia rosmarinus. Exine ornamentation of pollen was examined tectate perforate, verrucate-reticulate, micro-reticulate, reticulate, reticulate-cristatum, gemmate-echinate, echinate-perforate, perforate-striate, rugulate, rugulate-striate, bi-reticulate, reticulate-perforate and perforate-micro-reticulate showing great variations. Exine thickness was noted highest for Rosa canina 2.9 µm and minimum in Punica granatum 0.65 µm. This study of pollen imaging visualization of herbaceous flora contributes to the opportunity for the taxonomic evaluation of and fills knowledge gaps in studies of herbaceous flora identification using classical microscopic taxonomic tools for their accurate identification. RESEARCH HIGHLIGHTS: Pollen in unexplored herbaceous flora of the Samarkand region was studied with light and scanning electron microscopic pollen study. There is a high variation in observed pollen micromorphological characters. Pollen microscopic morphology has important taxonomic value for the identification of herbaceous species.

Taxonomic significance of morphological and elemental characteristics of achenes of Artemisia genus from Turkey.

In the study, the achene macromorphological and micromorphological characters of the genus Artemisia distributed in Turkey have been researched with the target of knowing systematically important carpological structures for the examined species. Macro-morphological structures of the achenes including color, shape, dimension, and carpopodium diameter were studied with 100 achenes of 10 specimens per taxa with a Light Microscope. Micro-morphological features of the achenes containing surface ornamentation, anticlinal and periclinal cell walls, epidermal cells, and the presence of secondary structures were examined with a Scanning Electron Microscope. EDS analyses were performed with a SEM. EDS analyses were carried out by selecting the same spot on the sample surface at 80 sec under 30 µm aperture size, with 20 kV acceleration voltage, 8 mm operating distance, high current, and processing time conditions. The color, shape, and dimension of achene have macro-morphologically shown variations. The examined achenes are separated into four shapes; fusiform-oblong, oblong, oblong-ovate, and ovate. Oblong-ovate is the most common type. Achene dimensions range from 0.62 to 2.48 mm in length, and from 0.30 to 1.21 mm in width. Also, carpopodium diameter varies between 0.10 and 0.19 mm. Achene surfaces of the examined taxa are micro-morphologically assessed, and substantial differences are noticeably detected on behalf of the surface structures for instance, surface ornamentation, anticlinal and periclinal cell walls, epidermal cells, and the presence of secondary structures of the achenes. Surface ornamentation is separated into 10 types: irregularly sulcate, regularly sulcate, ruminate, sulcate-scalariform, rugose, favulariate, slightly sulcate, alveolate, tuberculate, and reticulate. A percentage comparison of the elements in the achene pericarp of the studied taxa has been performed with SEM-EDS. Accordingly, pericarps in taxa include C, Ca, K, Mg, Cl, Si, Na, and S elements. In the taxonomy of the genus Artemisia, the achene morphological characters are very significant characteristics that disclose inter-specific relations among the examined taxa. Moreover, a dichotomous key is offered for the identification of the studied taxa based on achene characters. RESEARCH HIGHLIGHTS: The achenes of Turkish Artemisia taxa have been examined in depth. The morphological characteristics of achenes of Turkish Artemisia taxa have been studied using SEM and LM for the first time and debated the systematic practice of these characters. The elemental content of the achene pericarp has been systematically evaluated for the first time.

Pollen morphology of Acanthoideae species from the Shivalik Foothills in Rajaji National Park (Uttarakhand, India).

Apart from its role in plant taxonomy, the understanding of pollen morphology is considered an essential interdisciplinary tool in diverse applied fields, including plant systematics, melissopalynology, aeropalynology, forensic palynology, paleopalynology, and copropalynology. In palynotaxonomy, it is frequently employed to classify and validate natural groups across a range of hierarchical levels, from higher categories down to the infrageneric level. The subfamily Acanthoideae, within the Acanthaceae family, consists of a diverse group of flowering plants that are distributed globally. The present study attempted a comprehensive analysis of the pollen morphology, employing both light microscopy (LM) and scanning electron microscopy (SEM), for a total of 13 Acanthoideae species from the Shivalik Foothills in Rajaji National Park (located in the northern Indian state of Uttarakhand, Western Himalaya). The findings indicated that the Acanthoideae is characterized by eurypalynous features, and the studied species exhibited pollen grains that were monads, radially symmetrical, and varied in size from small to large. The pollen grains were predominantly tricolporate or heteroaperturate, with porate occurrences being rare. The significant variation in exine sculpturing, including reticulate, coarsely reticulate, and bireticulate patterns, holds substantial taxonomic significance. The detailed presentation encompasses pollen morphological characters described with LM and SEM micrographs, along with a species-level identification key. RESEARCH HIGHLIGHTS: This article provides a thorough analysis of the pollen morphology of Acanthoideae taxa using both light microscopy and scanning electron microscopy, covering 13 species across 10 genera and revealing a broad spectrum of pollen characteristics, including size, shape, aperture type, and exine sculpturing. The microscopic investigation of these Acanthoideae species not only enhances our understanding of their pollen morphology but also aids in species identification through the development of a pollen-based key.

Ciprofloxacin loaded PEG coated ZnO nanoparticles with enhanced antibacterial and wound healing effects.

Antimicrobial resistance is a worldwide health problem that demands alternative antibacterial strategies. Modified nano-composites can be an effective strategy as compared to traditional medicine. The current study was designed to develop a biocompatible nano-drug delivery system with increased efficacy of current therapeutics for biomedical applications. Zinc oxide nanoparticles (ZnO-NPs) were synthesized by chemical and green methods by mediating with Moringa olifera root extract. The ZnO-NPs were further modified by drug conjugation and coating with PEG (CIP-PEG-ZnO-NPs) to enhance their therapeutic potential. PEGylated ZnO-ciprofloxacin nano-conjugates were characterized by Fourier Transform Infrared spectroscopy, X-ray diffractometry, and Scanning Electron Microscopy. During antibacterial screenings chemically and green synthesized CIP-PEG-ZnO-NPs revealed significant activity against clinically isolated Gram-positive and Gram-negative bacterial strains. The sustainable and prolonged release of antibiotics was noted from the CIP-PEG conjugated ZnO-NPs. The synthesized nanoparticles were found compatible with RBCs and Baby hamster kidney cell lines (BHK21) during hemolytic and MTT assays respectively. Based on initial findings a broad-spectrum nano-material was developed and tested for biomedical applications that eradicated Staphylococcus aureus from the infectious site and showed wound-healing effects during in vivo applications. ZnO-based nano-drug carrier can offer targeted drug delivery, and improved drug stability and efficacy resulting in better drug penetration.

Scanning electron microscopic exploration of intricate pollen morphology and antimicrobial potentials of gourd family.

This study employs scanning electron microscopy (SEM) to delve into the intricate pollen morphology of Cucurbitaceae (Gourd Family) species, unraveling the nuanced details of their structural features. Concurrently, the research investigates the antimicrobial potentials encoded within these pollen grains, shedding light on their possible applications in the realm of natural antimicrobial agents. Cucurbitaceae plants showcases significant antibacterial and antifungal potentials, underscoring its potential as a source for novel antimicrobial compounds. This research endeavors to provide a comprehensive analysis of pollen morphometry in 12 Cucurbitaceous species, with the primary goal of identifying pollen morpho-types to enrich the taxonomic understanding of the Cucurbitaceae. Following the Erdtman protocol, the study involved processing, measuring, and capturing pollen grains using SEM techniques. Qualitative data were analyzed to evaluate the variations in pollen types, size, and exine stratified sculptured layering. The pollen grains exhibit characteristics of being monads, ranging in size from medium to very large, with the prevailing shape being prolate-spheroidal in six species. Notably, the maximum polar axis diameter was recorded for Cucurbita pepo (106.3 µm), while the minimum was observed in Zehneria anomala (32.6 µm). The grains of Cucurbitaceae exhibit diverse surface patterns, including reticulate columellae, reticulate, verrucate-scabrate, verrucate-gemmate, echinate baculate, reticulate-perforate, and micro-reticulate. This SEM investigation illuminates the intricacies of Cucurbitaceae pollen morphology while concurrently highlighting their noteworthy antimicrobial potentials. HIGHLIGHTS: High-resolution imaging reveals complex pollen morphology. Identification of unique antimicrobial structures on Cucurbitaceae pollen (gourd family). Exploring medicinal potential: Antimicrobial properties of cucurbitaceae species.

Green synthesis of ZnO nanoparticles from ball moss (Tillandsia recurvata) extracts: characterization and evaluation of their photocatalytic activity.

Green synthesis (GS), referred to the synthesis using bioactive agents such as plant materials, microorganisms, and various biowastes, prioritizing environmental sustainability, has become increasingly relevant in international scientific practice. The availability of plant resources expands the scope of new exploration opportunities, including the evaluation of new sources of organic extracts, for instance, to the best of our knowledge, no scientific articles have reported the synthesis of zinc oxide nanoparticles (ZnO NPs) from organic extracts of T. recurvata, a parasitic plant very common in semiarid regions of Mexico.This paper presents a greener and more efficient method for synthesizing ZnO NPs using T. recurvata extract as a reducing agent. The nanoparticles were examined by different techniques such as UV-vis spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and BET surface analysis. The photocatalytic and adsorptive effect of ZnO NPs was investigated against methylene blue (MB) dye in aqueous media under sunlight irradiation considering an equilibrium time under dark conditions. ZnO nanoparticles were highly effective in removing MB under sunlight irradiation conditions, showing low toxicity towards human epithelial cells, making them promising candidates for a variety of applications. This attribute fosters the use of green synthesis techniques for addressing environmental issues.This study also includes the estimation of the supported electric field distributions of ZnO NPs in their individual spherical or rounded shapes and their randomly oriented organization, considering different diameters, by simulating their behavior in the visible wavelength range, observing resonant enhancements due to the strong light-matter interaction around the ZnO NPs boundaries.

Effects of Propolis-Based Herbal Toothpaste on Dentine Hypersensitivity.

INTRODUCTION: The objective of this in vitro study was to compare the effectiveness of a propolis-based herbal toothpaste with 5% sodium fluoride varnishin obstructing human dentinal tubules; Scanning electron microscopy was utilised to obtain quantitative and qulitative data on tubular obstruction. METHODS: Thirty-nine extracted human premolar teeth were collected. The cementum layer was removed using a water-cooled diamond bur and the smear layer using ethylenediaminetetraacetic acid (EDTA) 17%. Then, the samples were randomly divided into 3 groups (n = 13 each), as follows: group 1: dentin discs exposed to the propolis-based herbal toothpaste (Herbex); group 2: dentin discs exposed to 5% sodium fluoride varnish; and group 3: control. Then, all discs were observed and imaged in 4 non-overlapping fields by an electron microscope at 2000× magnification. The topography and number of open, closed, and semi-closed tubules were counted in all images. The data were analysed using Kruskal-Wallis test, Mann-Whitney U test, and Friedman test. The statistical analysis was performed with SPSS statistic 22.0 software, with a significance level of α = 0.05. RESULTS: In pairwise comparisons of the groups considering the percentage of open, closed, and semi-closed tubules, the difference was not statistically significant between the 5% sodium fluoride varnish and propolis groups in the closed and semi-closed tubules, but it was statistically significant with the control group. Additionally, the percentage of open tubules in the propolis-based herbal toothpaste group was significantly lower than in the 5% sodium fluoride varnish and control group. CONCLUSIONS: Both propolis-based herbal toothpaste and 5% sodium fluoride varnish is effective in blocking human dentin tubules to various extents.

Tailoring the Structural and Optical Properties of Cerium Oxide Nanoparticles Prepared by an Ecofriendly Green Route Using Plant Extracts.

The present study explores an environmentally friendly green approach to obtain cerium oxide nanoparticles via a biomediated route using Mellisa officinalis and Hypericum perforatum plant extracts as reducing agents. The as-prepared nanoparticles were studied for their structural and morphological characteristics using XRD diffractometry, scanning electron microscopy, Raman, fluorescence and electronic absorption spectra, and X-ray photoelectron spectroscopy (XPS). The XRD pattern has shown the centered fluorite crystal structure of cerium oxide nanoparticles with average crystallite size below 10 nm. These observations were in agreement with the STEM data. The cubic fluorite structure of the cerium oxide nanoparticles was confirmed by the vibrational mode around 462 cm-1 due to the Ce-08 unit. The optical band gap was estimated from UV-Vis reflectance spectra, which was found to decrease from 3.24 eV to 2.98 eV. A higher specific area was determined for the sample using M. officinalis aqueous extract. The EDX data indicated that only cerium and oxygen are present in the green synthesized nanoparticles.

Micrometer insights into Nepeta genus: Pollen micromorphology unveiled.

This study provides a comprehensive pollen micromorphology within the Nepeta genus, revealing intricate details about the pollen grains' structure and characteristics. The findings shed light on the evolutionary and taxonomical aspects of this plant genus, offering valuable insights for botanists and researchers studying Nepeta species. The pollen grains of 18 Nepeta species were studied using scanning electron microscopy (SEM) and light microscopy (LM) in Northern Pakistan. At the microscale, pollen quantitative measurements, qualitative traits, and diverse sculpturing patterns were reported and compared. Significant differences in pollen size, shape, ornamentation, and sculpturing patterns were discovered among the Nepeta species. Our data show that exine sculpturing is quite diverse, with most species exhibiting a reticulate perforate pollen pattern. Nepeta connata, Nepeta discolor, Nepeta elliptica, revealed a distinct bireticulate perforate exine stratification. Hexazonocolpate pollen is the most common. Furthermore, the surface membrane attributes of the colpus varied greatly, ranging from rough, scabrate, psilate, to sinuate patterns. Principal Component Analysis (PCA) was used to discover the key factors influencing pollen diversity. PCA results showed that polar and equatorial diameters, colpi size, and exine thickness were the most influential pollen features between Nepeta species. This study adds to our understanding of pollen morphology in the Nepeta genus, offering information on the vast range of characteristics found in this economically important group. The extensive characterization of pollen features provides useful insights for the categorization and differentiation of Nepeta species, adding to the Lamiaceae micromorphology.

Pharmacognostic characterization of Dicleptera chinensis by scanning electron microscopy, light microscopy, and analytical techniques.

Dicleptera chinensis J. (Acanthaceae) has been employed in traditional medicinal systems for treating various ailments. It has been used as an anti-inflammatory, wound healing, diuretic, and detoxifying agent in different regions of the world. This study determines several pharmacognostic standards, which are useful to ensure safety, efficacy, and purity of D. chinensis. Different parts of the plant were examined through a scanning electron microscope and light microscope, and cross-section images revealed several useful botanical features of the plant. The color, size, odor, shape, and surface characteristics of plant parts were also examined macroscopically. Pharmacognostic standardization parameters including ash values, loss on drying, swelling index, hemolytic index, and foaming index were determined in accordance with WHO guidelines. Heavy metal analysis was executed through atomic absorption spectrophotometer which depicted the presence of heavy metals and trace elements within the acceptable range. Qualitative phytochemical tests for alkaloids, flavonoids, saponins, glycosides, tannins, carbohydrates, lipids, protein, and so forth of plant extract were also performed, which showed the valuable amount of these phytochemicals useful for medicinal purposes. Preliminary phytochemical tests provide an indication for major phytoconstituents classes present in the plant. These quantitative and qualitative microscopic features are helpful in establishing the pharmacopeia standards of plant. Assessment of various pharmacognostic features such as morphology of various plant parts explained along with physicochemical and phytochemical analysis could be very helpful for future research. RESEARCH HIGHLIGHTS: Pharmacognostic standardization is employed as reported evidence for correct identification of D. chinensis. Structures identified by scanning electron microscopy and light microscopy serve as diagnostic features of plant. Important secondary metabolites present in the plant suggest the need for further exploration through advanced metabolomics and other analytical techniques.

Investigations on the morpho-anatomy and histochemistry of Aconitum napellus L.

Aconitum napellus L. is a popular medicinal plant extensively used in homeopathy. This article provides detailed morphology and microscopy, including the anatomical and histochemical features of the herb, to aid authentication and quality control. In cross-section, the root in secondary growth shows the phloem surrounded by pericyclic fibers and a well-developed xylem. The stem is irregular in outline, displaying unicellular trichomes and many free collateral vascular bundles encircling the pith. The leaf is dorsiventral, hypostomatic with anomocytic and anisocytic stomata, and shows non-glandular trichomes. The floral parts are characterized by uniseriate epidermises, homogeneous mesophyll, anomocytic stomata on the abaxial surface, trichomes, and oval pollen grains. The tissue fragments in powdered herbs show these characteristics and have numerous starch grains with thimble-shaped, linear or star-shaped hilum. The detailed macroscopic and microscopic analysis provided in this study can help in the authentication and quality control of A. napellus raw materials. RESEARCH HIGHLIGHTS: Key anatomical, micromorphological, and microchemical features of Aconitum napellus are described. The results of the study can support the taxonomy of the genus Aconitum. Morphological standardization of the species reported here is helpful in the quality control of this herb.

Evaluation of biological potential of UV-spectrophotometric, SEM, FTIR, and EDS observed Punica granatum and Plectranthus rugosus extract-coated silver nanoparticles: A comparative study.

Recent developments in the green synthesis of metallic nanoparticles (NPs) using phytoconstituents have attracted the attention of the global scientific community. The present study was designed to synthesize silver NPs (AgNPs) using Punica granatum and Plectranthus rugosus plant extracts. The fabricated AgNPs were characterized using UV-visible spectrophotometry (UV-Vis), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy-dispersive x-ray spectroscopy (EDS). The shift in the color of the silver nitrate (AgNO3 ) solution after the addition of P. granatum and P. rugosus extracts indicated the synthesis of AgNPs. The effect of AgNO3 concentrations and pH on the synthesis of AgNPs was also evaluated. The findings of this study suggest that AgNO3 concentration of 1 mM, reaction time of 1 h, and pH of 7 at room temperature were the best suited conditions for the synthesis of AgNPs. According to the FTIR analysis, amidic and carbonyl compounds were primarily responsible for the encapsulation of AgNPs. SEM investigations have shown irregularly shaped geometry with sizes of 35 nm (P. granatum) and 33 nm (P. rugosus) with low agglomeration. The prepared AgNPs exhibited good potential for 2,2-diphenyl-1-picrylhydrazyl radical scavenging, with values of 70% (P. granatum) and 68% (P. rugosus). Hence, we conclude that the leaves of P. granatum and P. rugosus are excellent material for designing of different plant-extracted-conjugated AgNPs for biomedical applications. RESEARCH HIGHLIGHTS: Preparation of the AgNPs using novel plants extracts. P. granatum and P. rugosus extract as reducing, capping, stabilizing, and optimizing agents. Thorough comparative characterization using UV-Vis spectrophotometer, FTIR, SEM, and EDS which is a first of its kind. Comparative antioxidant activity.

Investigation on the effect of several parameters involved in the biodegradation of polyethylene (PE) and low-density polyethylene (LDPE) under various seawater environments.

This work investigates the biodegradation of polyethylene (PE) and low-density polyethylene (LDPE) and the leaching of their harmful additives. Micro/macro-plastics of both types were subjected to different laboratory-controlled conditions for 3 months. Gas Chromatography-Mass Spectroscopy (GC-MS) results revealed that leachate concentrations ranged from 0.40 ± 0.07 µg/L to 96.36 ± 0.11 µg/L. It was concluded that the additives' leaching process was promoted by light. However, light was not the only factor examined; microorganisms, pH, salinity, aeration/mixing and temperature influenced the biodegradation process, too. GC-MS results showed a prodigious impact on the biodegradation process when Pseudomonas aeruginosa was added to the artificial seawater compared to plastics exposed to light/air only. Scanning Electron Microscopy (SEM) micrographs demonstrated a significant alteration in the plastics' morphologies. Similarly, Fourier-Transform Infrared Spectroscopy (FTIR) spectra showed obvious changes in plastics characteristic peaks, especially microplastics. Furthermore, it was shown that PE was more susceptible to degradation/biodegradation than LDPE. Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) findings showed that some toxic metals were present in water samples after experiments, with concentrations above the permissible limits. For instance, bio-augmentation/bio-stimulation experiments showed that the concentrations of Pb, Sr, and Zn were 0.59 mg/L, 70.09 mg/L, and 0.17 mg/L, respectively; values above the permissible limits. It is crucial to emphasise that plastics must be meticulously engineered to avoid environmental and human impacts, originated from their degradation by-products. Furthermore, a holistic approach engaging stakeholders, researchers, policymakers, industries and consumers, is essential to effectively tackle the global challenge of marine plastic pollution.

Microscopic characterization, TLC fingerprinting and optimization of total lipid content from Euphorbia neriifolia (L.) using response surface methodology.

Euphorbia neriifolia (EN) is a medicinal plant used to treat a variety of ailments in traditional systems. Despite numerous studies on pharmacological activities, no information was available on the microscopic study of this plant. This is the first study that has been attempted to fill this need by performing the light and field emission scanning electron microscopy (FESEM) of leaf, stem, and latex. The powder microscopy of several organs (leaves, stem, and bark) and exudate (latex) of EN was carried out using safranine, fast green, phloroglucinol, and other standard solutions at different magnifications. The chemical fingerprinting of petroleum ether extract was accomplished by using thin layer chromatography. The optimization of total lipid content from the EN leaf under ultrasound-assisted extraction (UAE) and soxhlet extraction (SE) procedure was determined using response surface methodology (RSM). The studied factors that affect the lipid content were: solvent ratio, extraction temperature, and extraction time. Several notable characteristics observed in the leaf of EN are amphistomatic leaves with anticlinical cell walls, anomocytic stomata, spongy mesophyll cells, elongated palisade cells, angular collenchyma, and U-shaped vascular bundle. The plano-convex midrib is covered by polygonal to oval-shaped cuticles and contains anomocytic stomata. The circular petiole has no trichomes and contains laticifers, crystals, and idioblasts. The circular stem was observed with trichomes, hypodermis, collenchyma, parenchymatous cells, central pith, pentagonal stellar region, cambium, and 2-4 times more xylem that of phloem. All of the powdered plant parts and exudate under study contained trichomes, xylem vessels, wood fibers, cork cells, starch grains, calcium oxalate crystals, idioblasts, lignified cork, tannin content, stone cells, and oil globules. The blackish-green colored petroleum ether extract with semi-solid consistency showed the greatest percent (%) yield of 4% in the latex of EN. The thin layer chromatography (TLC) examination of petroleum ether extract of EN leaf produced a maximum 6 spots with Rf values of 0.16, 0.58, 0.62, 0.73, and 0.96 in the mobile phase of petroleum ether-acetone (8:2). In terms of optimization, the dark green colored UAE extract with semi-sticky consistency showed highest % yield of 4.5% whereas the yellowish green colored SE extract of sticky consistency showed the highest % yield of 4.9%. The findings showed that there were not many differences in the total lipid content between UAE (0.16%) and SE (0.11%). However, the best optimum condition for lipid content extraction analysis was obtained as follows: solvent ratio (PE:HE) 50:50, extraction temperature 50°C, extraction time 45 min for UAE, and solvent ratio (PE:HE) 60:40, extraction temperature 45°C, and extraction time of 24 h for SE. Hence, this study signifies the various noteworthy microscopic features along with the presence of different phytocompounds through TLC and best optimized condition for the extraction of lipids from different parts of EN. As no previous study has been reported, the outcomes obtained from the current study prove to be beneficial in the identification of species, quality control, and detection of any adulteration from the laboratory and commercial samples of EN. RESEARCH HIGHLIGHTS: The percent yield was found to be maximum in latex extract (4%). The leaf pet ether extract was separated into 6 bands with different Rf values. The extracted compounds from Euphorbia neriifolia leaves were categorized into non-polar heat tolerant. The highest total lipid yield (0.1119) was obtained at solvent ratios 60:40 of PE:HE (petroleum ether: petroleum hexane).

In vitro and ex vivo anti-Pythium insidiosum potential of ozonated sunflower oil.

This study sought to evaluate the in vitro and ex vivo susceptibility of Pythium insidiosum to ozonized sunflower oil (OSO) and verify the morphological alterations of OSO-exposed hyphae. Susceptibility assays were performed according to the broth microdilution protocol M38-A2/CLSI, and the minimal inhibitory (MIC) and minimal oomicidal (MOC) concentrations were also determined. Non-ozonated sunflower oil (SO) was used as the oil control. Additionally, kunkers from equine pythiosis were exposed to OSO. Damages caused by OSO and SO on P. insidiosum hyphae ultrastructure were verified using scanning electron microscopy. The MIC range for OSO was 7000 to 437.5 mg/mL, and the values for SO were higher, ranging from 56000 to 14000 mg/mL. The MOC was equal to MIC for both oil formulations. The OSO fully inhibited the oomycete growth from kunkers, although there was P. insidiosum growth in the kunker control in 24 h of incubation. The SEM analyses showed that both OSO and SO caused morphological alterations in P. insidiosum hyphae, highlighting the presence of cavitation along the hyphae with loss of continuity of the cell wall, which was more evident in the OSO-treated hyphae. The OSO had the best oomicidal activity, leading us to believe that our findings may support future research containing this formulation to be applied in integrative medicine protocols to control pythiosis in animals and humans.

Micromorphological and phytochemical profiling of Delphinium suave Huth. from Hindukush range, Lower Dir Khyber Pakhtunkhwa Pakistan.

This is a very first attempt to study various parameters of a medicinal plant, Delphinium suave Huth. The plant is erect, geophytic, herbaceous, with tuberous root, trifid in a palmatipartite, strigose cuneate leaf and white spurred zygomorphic flower. The root was isodiametric phellem with single non-glandular trichomes. The stem revealed single-layered cuticle, multiseriate epidermis, cortex, pith ray and uniserate bowed non-glandular trichomes. The leaf was amphistomatic, showed tapering trichomes, prismatic crystals and ranunculaceous stomata with circumference 144.66-182.67 µm. Pollen grains in Light Microscopy (LM), were prolate, spheroidal trizonocolpate, isopolar, radiosymmetric, scabrate, elliptic and monads. Scanning Electron Microscope (SEM) pollen surface was scabrate, monad, size varied from 18.06 to 16.67 µm, colpus to inaperturate, tricolpate, ornamented, echinus, isopolar, isodiametric and circular. SEM roots showed sclerenchymatic tissues, stellate, glandular, non-glandular trichomes and crystals. The stem showed scalariform, pitted vessels, warty protuberances, unicellular, silicified, non-glandular trichomes. Leaves powder revealed, simple, unicellular, tapered headed, uniseriate, sessile, capitate, unbranched glandular, non-glandular, trichomes with crystals. Capitate, stellate, circular, unicellular, branchy trichomes were observed for the first time through SEM. Powder drug study of root, stem leaves through LM revealed different tissues. Preliminary phytochemical revealed alkaloids, anthocyanins, anthraquinones, coumarins, flavones, mucilages, saponins, steroids, terpenoids, volatile oils and proteins. GC/MS showed 36 compounds in roots, 33 in stem while 40 in leaves. Fluorescence analysis of roots, stem and leaves showed variations in color when treated with chemicals. This study will assist pharmacognostic exploration, authentication from adulterants/allied species for consistent quality, resulting in safe use, preservation and efficacy. RESEARCH HIGHLIGHTS: This was first attempt on pharmacognostic study on D. suave Huth. which could be used as a foundation for identifying and authenticating the specie from other allied species by these morphological, anatomical, GC/MS profiling, phytochemical analysis and fluorescence analysis.

Revealing the intricate microcosm: Advancing invasive species pollen analysis through scanning microscopy of ultra sculpture.

Micromorphological visualization of plant surface peculiarities provides valuable characters for the precise identification of plant species. Invasive alien species, introduced outside their native range, pose significant ecological, and health challenges. This study focuses on micromorphological investigations of selected invasive plant species belonging to the families Amaranthaceae, Asteraceae, Moraceae, Crassulaceae, Cannabaceae, Fabaceae, Commelinaceae, and Oxalidaceae. The study employs scanning electron microscopy (SEM) to analyze the species micromorphology of pollen structure in depth to characterize the sculpturing patterns. Additionally, the study examines the pollen characteristics of these invasive plants, including shape, size, and fertility, along with exine sculpturing. The maximum polar diameter was observed for Senna tora (41.2 µm). The spines in Achillea fragrantissima were measured to have dimensions of approximately 1.91 µm in length and 2.11 µm in width. The findings shed light on the allergy-causing potential of these invasive species, providing crucial information for accurate identification and effective management strategies to safeguard the indigenous flora of the region. The study contributes to the knowledge base for botanists, taxonomists, policy makers, climate experts, and biodiversity specialists. RESEARCH HIGHLIGHTS: Integrating SEM to analyze the pollen of invasive species. Unveiling pollen micromorphology of invasive species. Exploring the microscopic realm of invasive pollen to accurately identify the species.