Pseudomonas putida infection induces immune-antioxidant, hepato-renal, ethological, and histopathological/immunohistochemical disruptions in Oreochromis niloticus: the palliative role of titanium dioxide nanogel.

BACKGROUND: Pseudomonas putida is a pathogenic bacterium that induces great losses in fishes, including Nile tilapia (Oreochromis niloticus). Currently, the application of nanomaterials in aquaculture practices has gained more success as it endows promising results in therapies compared to traditional protocols. OBJECTIVE: Therefore, the current perspective is considered the first report to assess the anti-bacterial efficacy of titanium dioxide nanogel (TDNG) against Pseudomonas putida (P. putida) in Nile tilapia. METHODS: The fish (n = 200; average body weight: 47.50±1.32 g) were allocated into four random groups (control, TDNG, P. putida, and TDNG + P. putida), where 0.9 mg/L of TDNG was applied as bath treatment for ten days. RESULTS: Outcomes revealed that P. putida infection caused ethological alterations (surfacing, abnormal movement, and aggression) and depression of immune-antioxidant variables (complement 3, lysozyme activity, total antioxidant capacity, superoxide dismutase, and reduced glutathione content). Additionally, a substantial elevation in hepatorenal biomarkers (aspartate and alanine aminotransferases and creatinine) with clear histopathological changes and immuno-histochemical alterations (very weak BCL-2 and potent caspase-3 immuno-expressions) were seen. Surprisingly, treating P. putida-infected fish with TDNG improved these variables and obvious restoration of the tissue architectures. CONCLUSION: Overall, this report encompasses the key role of TDNG as an anti-bacterial agent for controlling P. putida infection and improving the health status of Nile tilapia.

Nanoformulated herbal compounds: enhanced antibacterial efficacy of camphor and thymol-loaded nanogels.

Herbal components are highly useful assets for the advancement of novel antibacterial drugs. Nanotechnology holds great promise as an approach to enhance the effectiveness and develop the composition of these substances. The study developed nanogels incorporating camphor, thymol, and a combination derived from the initial nanoemulsions with particle sizes of 103, 85, and 135 nm, respectively. The viscosity of nanogels and the successful loading of compounds in them were examined by viscometery and ATR-FTIR studies. The bactericidal properties of the nanogels were examined against four bacterial strains. The nanogel containing camphor and thymol at 1250 µg/mL concentration exhibited complete growth suppression against Pseudomonas aeruginosa and Staphylococcus aureus. The thymol nanogel at 1250 µg/mL and the camphor nanogel at 2500 µg/mL exhibited complete inhibition of growth on Listeria monocytogenes and Escherichia coli, respectively. Both nanogels showed favorable effectiveness as antibacterial agents and could potentially examine a wide range of pathogens and in vivo studies.

Cymbopogon proximus and Petroselinum crispum seed ethanolic extract/Gum Arabic nanogel emulsion: Preventing ethylene glycol and ammonium chloride-induced urolithiasis in rats.

Urolithiasis is a prevalent urological disorder that contributes significantly to global morbidity. This study aimed to assess the anti-urolithic effects of Cymbopogon proximus (Halfa Bar) and Petroselinum crispum (parsley) seed ethanolic extract /Gum Arabic (GA) emulsion, and its nanogel form against ethylene glycol (EG) and ammonium chloride (AC)-induced experimental urolithiasis in rats. Rats were divided into four groups: group 1 served as the normal control, group 2 received EG with AC in drinking water for 14 days to induce urolithiasis, groups 3 and 4 were orally administered emulsion (600 mg/kg/day) and nanogel emulsion (600 mg/kg/day) for 7 days, followed by co-administration with EG and AC in drinking water for 14 days. Urolithiatic rats exhibited a significant decrease in urinary excreted magnesium, and non-enzymic antioxidant glutathione and catalase activity. Moreover, they showed an increase in oxalate crystal numbers and various urolithiasis promoters, including excreted calcium, oxalate, phosphate, and uric acid. Renal function parameters and lipid peroxidation were intensified. Treatment with either emulsion or nanogel emulsion significantly elevated urolithiasis inhibitors, excreted magnesium, glutathione levels, and catalase activities. Reduced oxalate crystal numbers, urolithiasis promoters' excretion, renal function parameters, and lipid peroxidation while improving histopathological changes. Moreover, it decreased renal crystal deposition score and the expression of Tumer necrosis factor-α (TNF-α) and cleaved caspase-3. Notably, nanogel emulsion showed superior effects compared to the emulsion. Cymbopogon proximus (C. proximus) and Petroselinum crispum (P. crispum) seed ethanolic extracts/GA nanogel emulsion demonstrated protective effects against ethylene glycol induced renal stones by mitigating kidney dysfunction, oxalate crystal formation, and histological alterations.

Polyethyleneimine in designed nanocomposite based magnetic halloysite nanotubes for extraction and determination of gallic acid in green tea.

An innovative and simple nanocomposite denoted as MHNTs@PEI was synthesized for gallic acid (GA) analytical sample pretreatment. Polyethyleneimine (PEI) functionalized was binded onto magnetic halloysite nanotubes (MHNTs) to inhence adsorption capacity. MHNTs@PEI was obtained only through two steps modification (amination and PEI modification). Characterizations showed that there are layers of synthetic PEI on the tubular structure of the material and magnetic spheres on its surface, both indicating successful synthesis of the nanocomposite. Furthermore, the adsorption isotherms and kinetic modeling showed that the Langmuir model and pseudo-first-order model fit the adsorption data, respectively. MHNTs@PEI achieved an adsorption capacity of 158 mg·g-1. Overall, the abundant adsorption sites significantly improved the adsorption performance of the MHNTs@PEI. Regeneration tests demonstrated that the MHNTs@PEI exhibits effective adsorption, even after undergoing five consecutive cycles. Optimization of key parameters (ratio, volume of elution, elution time and frequency) in the process of adsorption and desorption was also conducted. The limit of detection (LOD) and that of the quantification (LOQ) were 0.19 and 0.63 µg·mL-1, respectively, and the recoveries were 95.67-99.43 %. Finally, the excellent magnetism (43.5 emu·g-1) and the adsorption feature of MHNTs@PEI enabled its successful utilization in analytical sample pretreatment through the extraction of GA from green tea.

Self-adjuvanted L-arginine-modified dextran-based nanogels for sustained local antigenic protein delivery to antigen-presenting cells and enhanced cellular and humoral immune responses.

In the development of cancer vaccines, antigens are delivered to elicit potent and specific T-cell responses to eradicate tumour cells. Nonetheless, successful vaccines are often hampered by the poor immunogenicity of tumour antigens, rapid clearance by the innate immunity, and limited cross-presentation on MHC-I to activate CD8+ T-cells arm. To address these issues, we developed dextran-based nanogels to promote antigen uptake, storage, and cross-presentation on MHC-I, while directing immunogenic maturation of the antigen-presenting cells (APCs). To promote the nanocarriers interaction with cells, we modified DX with L-arginine (Arg), whose immunomodulatory activities have been well documented. The ArgDX nanogel performance was compared with the nanogel modified with L-histidine (His) and L-glutamate (Glut). Moreover, we introduced pH-sensitive hydrazone crosslinking during the nanogel formation for the conjugation and controlled release of antigen ovalbumin (OVA). The OVA-laden nanogels have an average size of 325 nm. We demonstrated that the nanogels could rapidly release cargoes upon a pH change from 7 to 5 within 8 days, indicating the controlled release of antigens in the acidic cellular compartments upon internalization. Our results revealed that the ArgDX nanogel could promote greater antigen uptake and storage in DCs in vitro and promoted a stronger immunogenic maturation of DCs and M1 polarization of the macrophages. The OVA signals were co-localized with lysosomal compartments up till 96 hours post-treatment and washing, suggesting the nanogels could facilitate prolonged antigen storage and supply from endo-lysosomal compartments. Furthermore, all the tested nanogel formulations retained antigens at the skin injection sites until day 21. Such delayed clearance could be due to the formation of micron-sized aggregates of OVA-laden nanogels, extending the interactions with the resident DCs. Amongst the amino acid modifications, ArgDX nanogels promoted the highest level of lymph node homing signal CCR7 on DCs. The nanogels also showed higher antigen presentation on both MHC-I and II than DX in vitro. In the in vivo immune studies, ArgDX nanogels were more superior in inducing cellular and humoral immunity than the other treatment groups on day 21 post-treatment. These results suggested that ArgDX nanogel is a promising self-adjuvanted nanocarrier for vaccine delivery.

Dual-drug delivery by thermo-responsive Janus nanogel for improved cellular uptake, sustained release, and combination chemo-thermal therapy.

The goal of this work was to examine the heat-sensitizing effects of Janus-coated magnetic nanoparticles (JMNPs) as a vehicle for 5-fluorouracil (5-Fu) and Quercetin (Qu) in C6 and OLN-93 cell lines. The cellular uptake of nanoparticles was evaluated using Prussian blue staining and ICP-OES after monolayer culturing of C6 (rat brain cancer cell) and OLN-93 (normal rat brain cell) cells. The cells were treated with free 5-Fu, Qu, and MJNPs loaded with Qu/5-Fu for 24 h, followed by magnetic hyperthermia under an alternating magnetic field (AMF) at a temperature of 43 °C. Using the MTT test and Flow cytometry, the C6 and OLN-93 cells were investigated after being subjected to hyperthermia with and without magnetic nanoparticles. The results of Prussian blue staining confirmed the potential of MJNPs as carriers that facilitate the uptake of drugs by cancer cells. The results showed that the combined application of Qu/5-Fu/MJNPs with hyperthermia significantly increased the amount of ROS production compared to interventions without MJNPs. The therapeutic results demonstrated that the combination of Qu/5-Fu/MJNPs with hyperthermia considerably enhanced the rate of apoptotic and necrotic cell death compared to that of interventions without MJNPs. Furthermore, MTT findings indicated that controlled exposure of Qu/5-Fu/MJNPs to AMF caused a synergistic effect. The advanced Janus magnetic nanoparticles in this study can be proposed as a promising dual drug carrier (Qu/5-Fu) and thermosensitizer platform for dual-modal synergistic cancer therapy.

Wound Healing Effect of Lippia sidoides and Myracrodruon urundeuva Nanogel.

Wound healing is a natural regenerative response to tissue injury and the conventional treatments consists of the use wound dressings with local administration of medicines, but, in some cases, are only partially effective and limited by toxicity or ineffective anti-microbial protection. Medicinal plants such as Lippia sidoides and Myracrodruon urundeuva have shown interesting pharmacological activities, allied to this, the association of these medicinal plants and nanotechnology, could mean an advantage in relation to classical approach. This study investigated the effect of a nanogel loaded with Lippia sidoides essential oil and Myracrodruon urundeuva extract (NAA) in an excisional wound healing model in rats. Animals were anesthetized and skin wounds were made using a metal punch. The groups were treated with vehicle, NAA or collagenase gel, for 7, 14 or 21 days and then sacrificed for tissue analysis. NAA did not show acute dermal irritation, further significantly reduced (p<0.05) the final wound area, accelerated the wound contraction and organization of collagen in the group treated for 14 days. The data presented here demonstrate the therapeutic potential for the use of nanotechnology associated with medicinal plants and provides evidence that corroborate with the use of L. sidoides and M. urundeuva as healing medicinal plants.

Glucose oxidase and ruthenium nanorods-embedded self-healing polyvinyl alcohol/polyethylene imine hydrogel for simultaneous photothermal/photodynamic/starvation therapy and skin reconstruction.

Tumor recurrence and wound healing represent significant burdens for tumor patients after the surgical removal of melanomas. Wound dressings with wound healing and anticancer therapeutic abilities could help to solve these issues. Thus, a hybrid hydrogel made of polyvinyl alcohol (PVA) and polyethylene imine (PEI) was prepared by cross-linking imine bond and boronic acid bond. This hydrogel was loaded with ruthenium nanorods (Ru NRs) and glucose oxidase (GOx) and named as nanocomposite hydrogel (Ru/GOx@Hydrogel), exhibiting remarkable photothermal/photodynamic/starvation antitumor therapy and wound repair abilities. Ru NRs are bifunctional phototherapeutic agents that simultaneously exhibit intrinsic photothermal and photodynamic functions. Three-dimensional composite hydrogel loaded with GOx can also consume glucose in the presence of O2 during tumor starvation therapy. Near-infrared (NIR) light-triggered hyperthermia can not only promote the consumption of glucose, but also facilitate the ablation of residual cancer cells. The antitumor effect of the Ru/GOx@Hydrogel resulted in significant improvements, compared to those observed with either phototherapy or starvation therapy alone. Additionally, the postoperative wound was substantially healed after treatment with Ru/GOx@Hydrogel and NIR irradiation. Therefore, the Ru/GOx@Hydrogel can be used as a multi-stimulus-responsive nanoplatform that could facilitate on-demand controlled drug release, and be used as a promising postoperative adjuvant in combination therapy.

Eco-friendly phosphorus-free flame-retardant coating for microfiber synthetic leather via alginate-based layer-by-layer technology.

The excellent comprehensive properties of microfiber synthetic leathers have led to their wide application in various aspects of our lives. However, the issue of flammability remains a significant challenge that needs to be addressed. Nowadays, the bio-based chemicals used in the flame-retardant materials have extremely grabbed our eyes. Herein, we developed an ecologically friendly flame-retardant microfiber synthetic leather using phosphorus-free layer-by-layer assembly technology (LBL) based on natural polysaccharide alginate (SA) coupled with polyethyleneimine (PEI) and 3-aminopropyltriethoxysilane (APTES). The effect of different LBL coating systems on the flame retardancy of microfiber synthetic leather was investigated. The results demonstrated that the introduction of APTES can completely inhibit the melt-dripping by enhancing char formation through silica elements. Furthermore, the trinary coating system consisting of SA/APTES/PEI exhibited excellent flame retardancy by combining gas-phase action from PEI and condensed-phase function from APTES. This modified microfiber synthetic leather showed a significantly higher limiting oxygen index (LOI) value of 33.0 % with no molten droplet. Additionally, the SA-based coating slightly suppressed the heat release, resulting in a 20 % reduction in total heat release during the combustion test. Overall, this work presents a facile and environmentally-friendly approach for achieving flame-retardant and anti-dripping microfiber synthetic leather.

Engineering pH responsive carboxyethyl chitosan and oxidized pectin -based hydrogels with self-healing, biodegradable and antibacterial properties for wound healing.

As an important organ of the human body, effective protection of the skin during trauma is crucial. An ideal wound dressing should have adhesion, adsorption of wound secretions, and good antibacterial properties. Two kinds of natural polysaccharide-based hydrogels, carboxyethyl chitosan/oxidized pectin hydrogel (CEC/OP) and carboxyethyl chitosan/oxidized pectin/polyethyleneimine hydrogel (CEC/OP/PEI), were reported by using carboxyethyl chitosan as the matrix, and oxidized pectin and branched polyethyleneimine as the crosslinking agents. Both hydrogels could be formed in a short time and exhibited the pH responsively due to the presence of imine bond. Compared with carboxyethyl chitosan/oxidized pectin hydrogel, polyethyleneimine containing hydrogel can form gel quickly, a more compact and stable three-dimensional space network structure was formed, which exhibited better swelling performance, the swelling ration, rheology property, self-repair ability, and antibacterial performance. When the mass fractions of carboxyethyl chitosan and oxidized pectin solutions are 4 wt% and 9 wt%, respectively, the hydrogel exhibited an antibacterial efficiency of >96 % against both Staphylococcus aureus and Escherichia coli. After adding 0.75 wt% polyethyleneimine, the antibacterial efficiency of hydrogel could reach up to >98 %. More importantly, the polyethyleneimine containing hydrogel has a significant effect in the treatment of bacterially infected wounds.

Application of a three dimensional polyethyleneimine functionalized graphene oxide aerogel as an adsorbent for the determination of phytohormones in ginseng.

Aerogels have attracted considerable attention in sample pretreatment for their outstanding properties, such as the unique porous structure, large surface area and abundant modifiable active sites. The present research reports a three-dimensional interconnected porous network aerogel (PEI-AGO) manufactured based on graphene oxide (GO), polyethyleneimine (PEI) and agar as basic materials through a vacuum freeze-drying treatment. The PEI-AGO aerogel exhibits great potential as a solid phase extraction adsorbent for the selective purification of six endogenous plant hormones in conjunction with high performance liquid chromatography-electrospray ionization tandem mass spectrometry (LC-MS). Several factors affecting the extraction efficiency were investigated. Under the optimized extraction conditions, a wide linear range of 0.5-100 ng mL-1 with a good linearity (r > 0.9934) was observed. Low limits of detection (LODs) and limits of quantification (LOQs) were obtained in the range of 0.032-0.155 ng mL-1 and 0.107-0.518 ng mL-1, respectively. Furthermore, the relative recoveries for spiked ginseng samples exhibited remarkable consistency, ranging from 90.2% to 117.6%, with a relative standard deviation (RSD) of ≤9.4% (n = 3). In summary, PEI-AGO has proven to be an effective adsorbent for the pretreatment and enrichment of phytohormones which can be used for the determination of trace endogenous acidic plant hormones in ginseng leaves.

Macroporous and ultralight polyethyleneimine-grafted chitosan/nano-TiO2 foam as a novel adsorbent with antibacterial activity for the efficient U(VI) removal.

The radioactive contamination from the excessive discharge of uranium-containing wastewater seriously threatens environmental safety and human health. Herein, macroporous and ultralight polyethyleneimine-grafted chitosan/nano-TiO2 composite foam (PCT) with antibacterial activity was synthesized, which could quickly remove U(VI) from solution. Among different PCT adsorbents, PCT-2 had the best adsorption performance for U(VI), which could be due to its honeycomb macroporous structures and the presence of abundant amino/imine groups. The kinetics and adsorption isotherms data were found in agreement with the pseudo-second-order model and the Langmuir model, respectively, indicating chemisorption or complexation as the main adsorption mechanism. The saturated adsorption capacity of PCT-2 for U(VI) reaches 259.91 mg/g at pH 5.0 and 298 K. The PCT-2 also presents good selectivity for U(VI) with the coefficient (ßU/M) order of Na+ > K+ > Mg2+ > Ca2+ > Ni2+ > Co2+ > Mn2+ > Al3+ > Fe3+ > Cu2+. The adsorption mechanism was explored using FT-IR and XPS analysis, indicating that amino/imine groups and hydroxyl groups are responsible for U(VI) complexation. Thermodynamic calculations show that U(VI) adsorption is endothermic and spontaneous. The ease of preparation, excellent adsorption performance and environmental friendliness of PCT-2 make it a novel adsorbent with antibacterial activity for radioactive contamination control.

Efficient removal of uranium (VI) from water by a hyper-cross-linked polymer adsorbent modified with polyethylenimine via phosphoramidate linkers.

Practical adsorbents with high efficiency are essential to effectively treating wastewater. Herein, a novel porous uranium adsorbent (PA-HCP) having a considerable amount of amine and phosphoryl groups was designed and synthesized by grafting polyethyleneimine (PEI) on a hyper-cross-linked fluorene-9-bisphenol skeleton via phosphoramidate linkers. Furthermore, it was used to treat uranium contamination in the environment. PA-HCP exhibited a large specific surface area (up to 124 m2/g) and a pore diameter of 2.5 nm. Batch uranium adsorptions on PA-HCP were investigated methodically. PA-HCP demonstrated a uranium sorption capacity of >300 mg/g in the pH range of 4-10 (C0 = 60 mg/L, T = 298.15 K), with its maximum capacity reaching 573.51 mg/g at pH = 7. The uranium sorption process obeyed the pseudo-second-order model and fitted well with the Langmuir isothermal. In the thermodynamic experiments, uranium sorption on PA-HCP was revealed to be an endothermic, spontaneous process. Even in the presence of competing metal ions, PA-HCP exhibited excellent sorption selectivity for uranium. Additionally, excellent recyclability can be achieved after six cycles. Based on FT-IR and XPS measurements, both the PO and -NH2 (and/or -NH-) groups on PA-HCP contributed to efficient uranium adsorption as a result of the strong coordination between these groups and uranium. Furthermore, the high hydrophilicity of the grafted PEI improved the dispersion of the adsorbents in water and facilitated uranium sorption. These findings suggest that PA-HCP can be used as an efficient and economical sorbent to remove U(VI) from wastewater.

Abatement of some commercial fungicide content from model dispersions by a new thiourea-graft-polyethyleneimine derivative.

A new derivative of polyethyleneimine (PEI) with 9% degree of substitution of its primary and secondary amino groups with thiourea moieties (TU9-PEI) has been synthesized and investigated as flocculant in model suspensions of commercial fungicide formulations Dithane M45, Melody Compact 49 WG, Cabrio®Top, and their mixtures. The structure of TU9-PEI, obtained by an aqueous one-pot strategy involving formaldehyde mediated coupling of PEI and TU, was confirmed by FTIR and 1H NMR spectroscopy as well as the streaming potential measurements. The settling time, polymer dose, and fungicide type and concentration were the parameters used for assessing the flocculation ability of the new polycation sample. The UV-Vis spectroscopy measurements revealed a good removal efficiency of TU9-PEI for all of the fungicides investigated, between 88 and 94%. Slightly higher removal percent was found for greater fungicide concentrations. The charge neutralization was indicated by zeta potential measurements (values close to zero recorded at the optimum polymer dose) as the main mechanism which contributed to the Dithane and Cabrio®Top particle removal and a combined effect of the TU9-PEI/fungicide particle electrostatic attractions and hydrogen bonds between both the amine and thiourea groups of the polycation chains and the hydroxyl ones on the copper oxychloride particles (negative values) in case of the Melody Compact 49 WG particle separation. Particle size and surface morphology analysis data gave supplementary evidences regarding the TU9-PEI ability to separate the fungicides investigated from simulated wastewater.

Xylanase covalent binding onto amidated pectin beads: Optimization, thermal, operational and storage stability studies and application.

Amidated pectin-polyethylene imine-glutaraldehyde (AP-PEI-GA) immobilizer was prepared. The ideal protocol that should be adopted during the immobilizer preparation was investigated via Box-Behnken design (BBD), and it comprised processing the AP beads with 3.4 % (w/w) PEI solution of pH 9.65 followed by 5.96 % (v/v) GA solution. The obtained AP-PEI-GA immobilizer was efficient, and it acquired 3.03 U.g-1 of immobilized xylanase (im-xylanase) activity. The computed Km and Vmax values for AP-PEI-GA im-xylanase were 16.67 mg.ml-1 and 20 g.ml-1.min-1, respectively. Through covalent coupling to AP-PEI-GA, Aspergillus niger xylanase thermodynamic properties T1/2 and D-values were increased by 2.05, 3.08, and 1.35 at 40, 50, and 60 °C, respectively. ΔHd and ΔGd for AP-PEI-GA im-xylanase at 40, 50, and 60 °C were higher than those for free form emphasizing more resistance to thermal denaturation. Im-xylanase showed 100 % activity for 20 successive cycles and hydrolyzed different agro-industrial wastes into reducing sugar and xylooligosaccharides (XOS) with more efficiency on pea peel (PP). AP-PEI-GA im-xylanase, PP weight, and hydrolysis time that should be adopted to obtain the highest reducing sugar and XOS yield were optimized through central composite design (CCD). Extracted XOS showed prebiotic and anti-oxidant activities.

Colorimetric detection of 2-tert-butyl-1,4-benzoquinone in edible oils based on a chromogenic reaction with commercial chemicals.

2-tert-butyl-1,4-benzoquinone (TBBQ) is the major oxidative product of tert-butylhydroquinone which is a widely used antioxidant in edible oils. The biotoxicity of TBBQ is a risk to human health, that the rapid and accurate monitoring of TBBQ is needed. Herein, a specific chromogenic reaction between TBBQ and polyethyleneimine (PEI) could generate adducts with maximum absorption at 478 nm. Amine groups of PEI are prone to link with TBBQ through Michael addition to form colored adducts. A colorimetric method for detecting TBBQ in edible oils was developed based on the aforesaid chromogenic reaction. The linear range for TBBQ was from 3.0 to 100.0 µg g-1, having a limit of detection of 1.8 µg g-1. Recoveries results ranged from 88.4 % to 93.1 %, which had a good agreement with that of high-performance liquid chromatography. Our study provides a rapid and simple strategy for the sensitive detection of TBBQ using commercial chemicals.

Efficient and selective capture of uranium by polyethyleneimine-modified chitosan composite microspheres from radioactive nuclear waste.

Uranium extraction from radioactive nuclear waste is vital for sustainable energy supply and ecological security. Herein, a polyethyleneimine-chitosan composite microspheres n-PEI/ECH-CTS (n = 0.1, 0.2, 0.3, 0.4, 0.5) were synthetized for efficient and selective uranium adsorption. The prepared chitosan microspheres with uniform size, uniform dispersion and good mechanical strength combine cost-effectiveness and environmental benefits. The 0.4-PEI/ECH-CTS exhibits the highest adsorption capacity of 380.65 mg g-1 within only 4 h due to high nitrogen content of 6.57 mol kg-1. The DFT calculations confirms that the optimal coordination mode of UO22+ and 0.4-PEI/ECH-CTS is one UO22+ chelated with two -NH2 from two adsorption units, respectively. Adsorption efficiency of U(VI) from simulated nuclear wastewater achieves to 100%, and the Kd value is up to 1.1 × 104 mL g-1, which is 1.7 × 104-6.1 × 104 times that of coexisting ions. The CU(VI) reduces in simulated wastewater from 10.98 mg L-1 to 1 µg L-1, which is well below the US Environmental Protection Agency uranium limits for drinking water (30 µg L-1). Besides, 0.4-PEI/ECH-CTS still maintains above 95% adsorption efficiency after seven cycles. In short, the 0.4-PEI/ECH-CTS microspheres integrate high performance, practicality and cost-effectiveness, which has great advantages in practical industrial applications.

An aptasensor for cadmium ions detection based on PEI-MoS2@Au NPs 3D flower-like nanocomposites and Thi-PtPd NPs core-shell sphere.

A novel ultrasensitive electrochemical aptasensor was proposed for quantitative detection of Cd2+. To this end, flower-like polyethyleneimine-functionalized molybdenum disulfide-supported gold nanoparticles (PEI-MoS2 NFs@Au NPs) were used as substrates for the modification of bare gold electrodes (AuE). PEI-MoS2 NFs@Au NPs not only possessed excellent biocompatibility and large specific surface area to enhance the cDNA loading capacity, but also possessed good conductivity to accelerate the electron transfer rate. Furthermore, the preparation of dendritic platinum-palladium nanoparticles (PtPd NPs) can effectively load Cd2+-aptamer. Thionine and aptamers were loaded onto PtPd NPs to construct Thi-PtPd NPs-aptamer signal probes. The signal probes were captured by the cDNA immobilized on the electrode via base-pairing rule, and the signal of Thi was detected by differential pulse voltammetry (DPV). In the presence of Cd2+, aptamer-cDNA unwinded, and the combination of aptamer and Cd2+ caused the signal probes to fall off the electrode and the electrical signal decreases. Under optimal conditions, the proposed aptasensor exhibited a linear relationship between the logarithm of Cd2+ concentration and the current response over a wide range of 1 × 10-3 nM to 1 × 102 nM, with a detection limit of 2.34 × 10-4 nM. At the same time, the aptasensor was used to detect Cd2+ in tap water with satisfactory results. In addition, it has good reproducibility, selectivity and stability, and has broad application prospects in heavy metal analysis.

Biofilm Microenvironment-Mediated MoS2 Nanoplatform with Its Photothermal/Photodynamic Synergistic Antibacterial Molecular Mechanism and Wound Healing Study.

Drug-resistant bacterial infections pose a serious threat to human public health. Biofilm formation is one of the main factors contributing to the development of bacterial resistance, characterized by a hypoxic and microacidic microenvironment. Traditional antibiotic treatments have been ineffective against multidrug-resistant (MDR) bacteria. Novel monotherapies have had little success. On the basis of the photothermal effect, molybdenum disulfide (MoS2) nanoparticles were used to link quaternized polyethylenimine (QPEI), dihydroporphyrin e6 (Ce6), and Panax notoginseng saponins (PNS) in a zeolitic imidazolate framework-8 (ZIF-8). A multifunctional nanoplatform (MQCP@ZIF-8) was constructed with dual response to pH and near-infrared light (NIR), which resulted in synergistic photothermal and photodynamic antibacterial effects. The nanoplatform exhibited a photothermal conversion efficiency of 56%. It inhibited MDR Escherichia coli (E. coli) and MDR Staphylococcus aureus (S. aureus) by more than 95% and effectively promoted wound healing in mice infected with MDR S. aureus. The nanoplatform induced the death of MDR bacteria by promoting biofilm ablation, disrupting bacterial cell membranes and intracellular DNA, and interfering with intracellular material and energy metabolism. In this study, a multifunctional nanoplatform with good antibacterial effect was developed. The molecular mechanisms of MDR bacteria were also elucidated for possible clinical application.

Extraction of benzoylurea insecticides from tea leaves based on thermoplastic polyethyleneimine embedded magnetic nanoparticle carbon materials.

A novel mosaic structured core-shell composite, Silica@C/Ni (Sil@C/Ni), has been prepared by embedding Ni nanoparticles on the surface of silica microspheres via coordination and carbonization reduction, and was used as magnetic solid-phase extraction sorbents in combination with high performance liquid chromatography (HPLC) for the extraction and determination of four benzoylurea insecticides (BUs) in tea leaves. Based on the fact that hydrogen bonding and hydrophobic interactions exist between the material and BUs, allowing BUs on the surface of the material can achieve rapid mass transfer and improved sorption performance, satisfactory extraction recoveries have been achieved in practical sample applications. Under the optimized experimental conditions, the linear ranges were 0.5-200 µg L-1 for diflubenzuron and triflumuron, 1.0-200 µg L-1 for teflubenzuron and 0.8-200 µg L-1 for flufenoxuron with the correlation coefficients R2 ≥ 0.9991. The method has limits of detection and limits of quantification of 0.2-0.4 µg L-1 and 0.5-1.0 µg L-1, respectively. The intra-day and inter-day relative standard deviations were less than 5%. The actual sample recoveries were 76.63-95.26%. In addition, Sil@C/Ni was used repeatedly for 15 times and still showed a relatively satisfactory recovery of the four BUs. Therefore, Sil@C/Ni has a high stability and can be used as an ideal magnetic solid phase extraction sorbent for the trace enrichment of BUs in tea-leaf samples.