Dietary consumption of polypropylene microplastics alter the biochemical parameters and histological response in freshwater benthic mollusc Pomacea paludosa.

One of the most common environmental pollutant in aquatic ecosystems are polypropylene microplastics and their impacts on aquatic organisms are still scarce. The study aimed to prepare polypropylene microplastics using organic solvent (spherical and 11.86-44.62 µm) and then test their toxicity on the freshwater benthic mollusc grazer Pomaceae paludosa. The present study investigated chronic (28 days) exposure of polypropylene microplastics via dietary supplements (250 mg kg-1, 500 mg kg-1 & 750 mg kg-1) in P. paludosa, and the toxic effect was evaluated in digestive gland tissue. The FTIR results revealed no change in polypropylene microplastics during ingestion or after egestion. On the other hand, Ingestion causes accumulation in their bodies and disrupts redox homeostasis. Meanwhile, alteration occurs in oxidative stress-related biomarkers such as increased reactive oxygen species level (ROS), impaired the biochemical parameters of antioxidant system catalase (CAT), glutathione peroxidase (GPx), reduced glutathione (GSH), and glutathione - S- transferase (GST), deterioration of oxidative stress effects in lipid peroxidation (LPO) and carbonyl protein (CP) and changed the digestive enzymes such as amylase, pepsin, esterase and alkaline phosphatase that are measured in hepatopancreas tissue. The histology results revealed that ingesting these microplastics caused severe damage to the digestive gland cells. According to the findings, ingestion of polypropylene microplastics in benthic freshwater mollusc causes more serious harm and impacts energy acquisition. This finding represents the ecological risk of polypropylene microplastic pollution in the freshwater ecosystem.

Development of Valsartan Floating Matrix Tablets Using Low Density Polypropylene Foam Powder: In vitro and In vivo Evaluation.

The main purpose of the study was to develop valsartan floating tablets (VFT) via non-effervescent technique using low density polypropylene foam powder, carbopol, and xanthan gum by direct compression. Before compression, the particulate powdered mixture was evaluated for pre-compression parameters. The prepared valsartan tablets were evaluated for post-compression parameters, swelling index, floating lag time, in vitro buoyancy studies, and in vitro and in vivo X-ray imaging studies in albino rabbits. The result of all formulations for pre- and post-compression parameters were within the limits of USP. FTIR and DSC studies revealed no interaction between the drug and polymers used. The prepared floating tablets had good swelling and floating capabilities for more than 12 h with zero floating lag time. The release of valsartan from optimized formulation NF-2 showed sustained release up to 12 h; which was found to be non-Fickian release. Moreover, the X-ray imaging of optimized formulation (NF-2) revealed that tablet was constantly floating in the stomach region of the rabbit, thereby indicating improved gastric retention time for more than 12 h. Consequently, all the findings and outcomes have showed that developed valsartan matrix tablets could be effectively used for floating drug delivery system.

Long-term microplastic retention causes reduced body condition in the langoustine, Nephrops norvegicus.

Microplastic represents a rising proportion of marine litter and is widely distributed throughout a range of marine habitats. Correspondingly, the number of reports of species containing microplastics increases annually. Nephrops norvegicus in the Firth of Clyde have previously been shown to retain large aggregations of microplastic fibres. The potential for N. norvegicus to retain plastic over an extended time period increases the likelihood of any associated negative impacts to the individual. This study represents the longest observation of the impacts of microplastic retention in invertebrates. We exposed N. norvegicus to plastic over eight months to determine the impacts of extended exposure. Over this period we compared the feeding rate, body mass, and nutritional state of plastic-fed N. norvegicus to that of fed and starved control groups. Following the experimental period, the plastic-fed langoustine contained microplastic aggregations comparable to those of small individuals from the Clyde Sea Area. Comparisons between fed, unfed and plastic-fed individuals indicated a reduction in feeding rate, body mass, and metabolic rate as well as catabolism of stored lipids in plastic contaminated animals. We conclude that N. norvegicus exposed to high levels of environmental microplastic pollution may experience reduced nutrient availability. This can result in reduced population stability and may affect the viability of local fisheries.

Gas permeability and thermal behavior of polypropylene films used for packaging minimally processed fresh-cut potatoes: a case study.

UNLABELLED: This work reports an experimental study on the permeability and thermal behavior of commercial polypropylene (PP) film used for fresh-cut potatoes packaging. The permeability was tested using oxygen, carbon dioxide, nitrogen, mix of these 3 gases, normally used for modified atmosphere packaging (MAP) and Air, to understand if it would be possible to extend the shelf life of this food product designed for the catering field in respect to the packaging behavior. The temperature influence on permeability data, from 5 to 40 °C, was analyzed, before and after 4, 8, 12, 15, and 20 d of food contact, pointing out the dependence between temperature and gas transmission rate (GTR), solubility (S), diffusion coefficient (D), and time lag (t(L)) parameters. The activation energies (E) of the permeation process were determined with the different gases used in the experiments. The thermal behavior of PP film was studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TG) to well understand its thermal stability. Fourier transformed-infrared with attenuated total reflectance (FT-IR/ATR) spectroscopy was also performed in order to study the influence of the food contact on the chemical characteristics of the polymer film. The results obtained were discussed and compared each other. Studied samples showed, for all investigated gases, an increase of gas permeability and S values at higher temperature. Heat resistance classification among the sample as it is and stored in modified atmospheres was made. Finally all performed experiments have showed good polymer stability for the shelf-life storage potatoes under study. PRACTICAL APPLICATION: Study of packaging material was performed in a range of temperature, which can simulate the service condition to assess the suitability of a commercial polymer film for modified atmosphere packaging of fresh-cut potatoes minimally processed designed for catering purpose.

Nano-mechanical transduction of polymer micro-cantilevers to detect bio-molecular interactions.

Using variothermal polymer micro-injection molding, disposable arrays of eight polymer micro-cantilevers each 500 µm long, 100 µm wide and 25 µm thick were fabricated. The present study took advantage of an easy flow grade polypropylene. After gold coating for optical read-out and asymmetrical sensitization, the arrays were introduced into the Cantisens(®) Research system to perform mechanical and functional testing. We demonstrate that polypropylene cantilevers can be used as biosensors for medical purposes in the same manner as the established silicon ones to detect single-stranded DNA sequences and metal ions in real-time. A differential signal of 7 nm was detected for the hybridization of 1 µM complementary DNA sequences. For 100 nM copper ions the differential signal was found to be (36 ± 5) nm. Nano-mechanical sensing of medically relevant, nanometer-size species is essential for fast and efficient diagnosis.

Preparation of phytantriol cubosomes by solvent precursor dilution for the delivery of protein vaccines.

Different delivery strategies to improve the immunogenicity of peptide/protein-based vaccines are currently under investigation. In this study, the preparation and physicochemical characterisation of cubosomes, a novel lipid-based particulate system currently being explored for vaccine delivery, was investigated. Cubosomes were prepared from a liquid precursor mixture containing phytantriol or glycerylmonooleate (GMO), F127 for particle stabilisation, and a hydrotrope (ethanol or polyethylene glycol (PEG(200)) or propylene glycol (PG)). Several liquid precursors were prepared, and the effect of varying the concentrations of F127 and the hydrotrope on cubosome formation was investigated. Formulations were prepared by fragmentation for comparison. The model protein ovalbumin (Ova) was also entrapped within selected formulations. Submicron-sized particles (180-300 nm) were formed spontaneously upon dilution of the liquid precursors, circumventing the need for the preformed cubic phase used in traditional fragmentation-based methods. The nanostructure of the phytantriol dispersions was determined to be cubic phase using SAXS whilst GMO dispersions had a reverse hexagonal nanostructure coexisting with cubic phase. The greatest entrapment of Ova was within phytantriol cubosomes prepared from liquid precursors. Release of Ova from the various formulations was sustained; however, release was significantly faster and the extent of release was greater from fragmented dispersions compared to liquid precursor formulations. Taken together, these results suggest that phytantriol cubosomes can be prepared using liquid precursors and that it is a suitable alternative to GMO. Furthermore, the high entrapment and the slow release of Ova in vitro highlight the potential of phytantriol cubosomes prepared using liquid precursors as a novel vaccine delivery system.

Fabrication and in vitro degradation of porous fumarate-based polymer/alumoxane nanocomposite scaffolds for bone tissue engineering.

In this work, the fabrication and in vitro degradation of porous fumarate-based/alumoxane nanocomposites were evaluated for their potential as bone tissue engineering scaffolds. The biodegradable polymer poly (propylene fumarate)/propylene fumarate-diacrylate (PPF/PF-DA), a macrocomposite composed of PPF/PF-DA and boehmite microparticles, and a nanocomposite composed of PPF/PF-DA and surface-modified alumoxane nanoparticles were used to fabricate porous scaffolds by photo-crosslinking and salt-leaching. Scaffolds then underwent 12 weeks of in vitro degradation in phosphate buffered saline at 37 degrees C. The presence of boehmite microparticles and alumoxane nanoparticles in the polymer inhibited scaffold shrinkage during crosslinking. Furthermore, the incorporation of alumoxane nanoparticles into the polymer limited salt-leaching, perhaps due to tighter crosslinking within the nanocomposite. Analysis of crosslinking revealed that the acrylate and overall double bond conversions in the nanocomposite were higher than in the PPF/PF-DA polymer alone, though these differences were not significant. During 12 weeks of in vitro degradation, the nanocomposite lost 5.3% +/- 2.4% of its mass but maintained its compressive mechanical properties and porous architecture. The addition of alumoxane nanoparticles into the fumarate-based polymer did not significantly affect the degradation of the nanocomposite compared with the other materials in terms of mass loss, compressive properties, and porous structure. These results demonstrate the feasibility of fabricating degradable nanocomposite scaffolds for bone tissue engineering by photo-crosslinking and salt-leaching mixtures of fumarate-based polymers, alumoxane nanoparticles, and salt microparticles.

Environmental analysis of plastic production processes: comparing petroleum-based polypropylene and polyethylene with biologically-based poly-beta-hydroxybutyric acid using life cycle analysis.

Polymers based on olefins have wide commercial applicability. However, they are made from non-renewable resources and are characterised by difficulty in disposal where recycle and re-use is not feasible. Poly-beta-hydroxybutyric acid (PHB) provides one example of a polymer made from renewable resources. Before motivating its widespread use, the advantages of a renewable polymer must be weighed against the environmental aspects of its production. Previous studies relating the environmental impacts of petroleum-based and bio-plastics have centred on the impact categories of global warming and fossil fuel depletion. Cradle-to-grave studies report equivalent or reduced global warming impacts, in comparison to equivalent polyolefin processes. This stems from a perceived CO(2) neutral status of the renewable resource. Indeed, no previous work has reported the results of a life cycle assessment (LCA) giving the environmental impacts in all major categories. This study investigates a cradle-to-gate LCA of PHB production taking into account net CO(2) generation and all major impact categories. It compares the findings with similar studies of polypropylene (PP) and polyethylene (PE). It is found that, in all of the life cycle categories, PHB is superior to PP. Energy requirements are slightly lower than previously observed and significantly lower than those for polyolefin production. PE impacts are lower than PHB values in acidification and eutrophication.

Oil removal from used sorbents using a biosurfactant.

Oil spills impose serious damage on the environment. Mechanical recovery by the help of oil sorbents is one of the most important countermeasures in oil spill response. Most sorbents, however, end up in landfills or in incineration after a single use. These options either produce another source of pollution or increase the oil recovery cost. In this study a biosurfactant was used to clean used oil sorbents. This use of biosurfactants is new. Washing parameters tested included sorbent type, washing time, surfactant dosage and temperature. It was found that with biosurfactant washing more than 95% removal of the oil from sorbents was achieved, depending on the washing conditions. Biosurfactants were found to have considerable potential for recycling the used sorbents.