ROS-Responsive Selenium-Containing Carriers for Coencapsulation of Photosensitizer and Hypoxia-Activated Prodrug and Their Cellular Behaviors.

The integration of hypoxia-activated chemotherapy with photodynamic therapy (PDT) has newly become a potent strategy for tumor treatment. Herein, a reactive oxygen species (ROS)-responsive drug carriers (PS@AQ4N/mPEG-b-PSe NPs) are fabricated based on the amphiphilic selenium-containing methoxy poly(ethylene glycol)-polycarbonate (mPEG-b-PSe), the hydrophobic photosensitizer (PS), and hypoxia-activated prodrug Banoxantrone (AQ4N). The obtained nanoparticles are spherical with an average diameter of 100 nm as characterized by transmission electron microscope (TEM) and dynamic laser scattering (DLS) respectively. The encapsulation efficiency of the PS and AQ4N reaches 92.83% and 51.04% at different conditions, respectively, by UV-vis spectrophotometer. It is found that the drug release is accelerated due to the good ROS responsiveness of mPEG-b-PSe and the cumulative release of AQ4N is up to 89% within 30 h. The cell test demonstrates that the nanoparticles dissociate when triggered by the ROS stimuli in the cancer cells, thus the PS is exposed to more oxygen and the ROS generation efficiency is enhanced accordingly. The consumption of oxygen during PDT leads to the increased tumor hypoxia, and subsequently activates AQ4N into cytotoxic counterpart to inhibit tumor growth. Therefore, the synergistic therapeutic efficacy demonstrates this drug delivery has great potential for antitumor therapy.

3D printing and enteric coating of a hollow capsular device with controlled drug release characteristics prepared using extruded Eudragit® filaments.

This work focuses on the extrusion of a brittle, tacky, cationic copolymer i.e. Eudragit® E-100 to prepare filament and subsequent 3D printing of hollow capsular device using the extruded filament. An optimum amount of talc and triethyl citrate was used for the possible extrusion of the polymer. There was no thermal and chemical degradation of the polymer observed after extrusion confirmed by DSC and FTIR analysis. Microscopic analysis of the printed capsule showed the layer-by-layer manner of 3D printing. Capsule parts were printed according to the set dimensions (00 size) with minimal deviation. Printed capsule showed the soluble behaviour in gastric fluid pH 1.2 where within 15 min the encapsulated drug encounters with the dissolution medium and almost 70% drug was dissolved within 4 hr. In case of phosphate buffer pH 6.8, the printed capsule showed a longed swelling behaviour up to 12 hr and then gradually bursting of capsule occurred wherein more than 90% encapsulated drug was dissolved within 36 hr. Enteric coating of the printed capsule showed similar behaviour in alkaline medium that observed with non-enteric capsule. This indicates the potential application of this printed capsules for both gastric and intestinal specific delayed drug delivery by a single step enteric coating process.

Development of multifunctional nanocomposites for controlled drug delivery and hyperthermia.

Magnetic nano/micro-particles based on clinoptilolite-type of natural zeolite (CZ) were fabricated and were expected to act as carriers for controlled drug delivery/release, imaging and local heating in biological systems. Adsorption of rhodamine B, sulfonated aluminum phthalocyanine and hypericin by magnetic CZ nano/micro-particles was investigated, as was the release of hypericin. Using an alternating magnetic field, local temperature increase by 10 °C in animal tissue with injected magnetic CZ particles was demonstrated. In addition, the CZ-based particles have been found to exhibit an anti-amyloidogenic effect on the amyloid aggregation of insulin and lysozyme in a dose- and temperature-dependent manner. Therefore, the mesoporous structure of CZ particles provided a unique platform for preparation of multifunctional magnetic and optical probes suitable for optical imaging, MRI, thermo- and phototherapy and as effective containers for controlled drug delivery. We concluded that magnetic CZ nano/micro-particles could be evaluated for further application in cancer hyperthermia therapy and as anti-amyloidogenic agents.

Bioresponsive nanostructured systems for sustained naltrexone release and treatment of alcohol use disorder: Development and biological evaluation.

In this study, microemulsions capable of transforming into nanostructured hexagonal phase gels in vivo upon uptake of biological fluids for naltrexone prolonged release were investigated as a strategy for management of alcohol use disorder (AUD). Microemulsions were prepared using monoolein, tricaprylin, water and propylene glycol; after preliminary characterization, one formulation was selected, which contained 55% of monoolein-tricaprylin (M-55). This microemulsion displayed size below 200 nm and Newtonian rheological behavior. Liquid crystalline gels formed in vitro upon 8 h of contact with water following a second order kinetics. After 120 h, <50% of naltrexone was released in vitro independently on drug loading (5 or 10%). In vivo, gels formed within 24 h of M-55 subcutaneous administration, and persisted locally for over 30 days providing slow release of the fluorescent marker Alexa fluor compared to a solution. Using the conditioned place preference paradigm, a test used to measure drug's rewarding effects, a single dose of M-55 containing 5% naltrexone reduced the time spent in the ethanol-paired compartment by 1.8-fold compared to saline; this effect was similar to that obtained with daily naltrexone injections, demonstrating the formulation efficacy and its ability to reduce dosing frequency. A more robust effect was observed following administration of M-55 containing 10% of naltrexone, which was compatible with aversion. These results support M-55 as a platform for sustained release of drugs that can be further explored for management of AUD to reduce dosing frequency and aid treatment adherence.

In vitro and in vivo studies of micro-depots using tailored microemulsion for sustained local anaesthesia.

In clinical practice, lidocaine is used as local anesthetic for the management of post-operative pain. The commercial formulation including gels, injections and ointments showed short duration of action (1 to 2 h). In this paper, the efforts have being made to develop tailored lidocaine-microemulsion (o/w), which on penetration in the skin layer cause micro-depots formation due to destabilization of the microemulsion system. To identify the microemulsion region, pseudo ternary diagrams were constructed using Capmul MCM as oil, Pluronic F68 as tri-block surfactant, polyethylene glycol 200 as co-surfactant at 1:4 and 1:6 ratios (S:Co-S). The selected 5%w/v lidocaine loaded microemulsion [Ld-ME-2(1:4)] was stable in thermodynamic test and during shelf life period (3 months). In ex vivo permeability study, the lidocaine release from Ld-ME-2(1:4) microemulsion was sustained in comparison to the marketed lidocaine ointment. The skin irritation study confirmed the safety of lidocaine loaded microemulsion. Tail flick test showed improved and sustain local anaesthetic effect in comparison to the market ointment. The improved efficacy of microemulsion system, was due to high penetration in the skin layer due to local precipitation of lidocaine from microemulsion. The findings suggest that the tailored microemulsion could be a potential strategy to prolong the local anaesthesia.

Exploring the Potential of Hydrophilic Matrix Combined with Insoluble Film Coating: Preparation and Evaluation of Ambroxol Hydrochloride Extended Release Tablets.

To explore the potential utility of combination of hydrophilic matrix with membrane-controlled technology, the present study prepared tablets of a water-soluble model drug (ambroxol hydrochloride), through process of direct compression and spray coating. Single-factor experiments were accomplished to optimize the formulation. In vivo pharmacokinetics was then performed to evaluate the necessity and feasibility of further development of this simple process and low-cost approach. Various release rates could be easily obtained by adjusting the viscosity and amount of hypromellose, pore-former ratios in coating dispersions and coating weight gains. Dissolution profiles of coated tablets displayed initial delay, followed by near zero-order kinetics. The pharmacokinetic study of different formulations showed that lag time became longer as the permeability of coating membrane decreased, which was consistent with the in vitro drug release trend. Besides, in vitro/in vivo correlation study indicated that coated tablets exhibited a good correlation between in vitro release and in vivo absorption. The results, therefore, demonstrated that barrier-membrane-coated matrix formulations were extremely promising for further application in industrialization and commercialization.

Pectin-decorated selenium nanoparticles as a nanocarrier of curcumin to achieve enhanced physicochemical and biological properties.

In this study, the authors developed pectin-stabilised selenium nanoparticles (pectin-SeNPs) for curcumin (Cur) encapsulation and evaluated their physicochemical properties and biological activities. Results showed that pectin-SeNPs and Cur-loaded pectin-SeNPs (pectin-SeNPs@Cur) exhibited monodisperse and homogeneous spherical structures in aqueous solutions with mean particle sizes of ∼61 and ∼119 nm, respectively. Cur was successfully encapsulated into pectin-SeNPs through hydrogen bonding interactions with an encapsulation efficiency of ∼60.6%, a loading content of ∼7.4%, and a pH-dependent and controlled drug release in vitro. After encapsulation was completed, pectin-SeNPs@Cur showed enhanced water solubility (∼500-fold), dispersibility, and storage stability compared with those of free Cur. Moreover, pectin-SeNPs@Cur possessed significant free radical scavenging ability and antioxidant capacity in vitro, which were stronger than those of pectin-SeNPs. Antitumour activity assay in vitro demonstrated that pectin-SeNPs@Cur could inhibit the growth of HepG2 cells in a concentration-dependent manner, and the nanocarrier pectin-SeNPs exhibited a low cytotoxic activity against HepG2 cells. Therefore, the results suggested that pectin-SeNPs could function as effective nanovectors for the enhancement of the water solubility, stability, and in vitro bioactivities of hydrophobic Cur.

Formulation, Optimization, and In vivo Evaluation of Gastroretentive Drug Delivery System of Nifedipine for the Treatment of Preeclampsia.

The study aimed to develop gastroretentive drug delivery system of nifedipine, its optimization, and in vivo evaluation. Bilayered tablet of nifedipine was prepared using central composite design with 3 factors, 5 responses, and 15 experimental trials. Response surface methodology along with numerical and graphical optimization was used to select the best formulation. Scanning electron microscopy study of optimized tablet at different time interval was carried out which showed formation of porous structure on the tablet surface. In vivo studies for optimized formulation were carried out on 10 healthy human volunteers and obtained pharmacokinetic parameters were compared with the marketed formulation, "Nicardia XL." Optimized formulation containing 3.083 mg HPMC K15M, 29.859 mg HPMC E15LV, and 3.541 mg Carbopol 974P releases the drug in a desired manner and remain buoyant for more than 12 h in human stomach. Both the formulations were found to have similar in vitro release profile (f1 4.5089 and f2 55.8274) and also were found to be bioequivalent. Finally, the stability study of the optimized formulation proved the integrity of the optimized formulation. Hence, the data suggest gastroretention as a promising approach to enhance bioavailability of nifedipine.

Preparation and Evaluation of Mosapride Citrate Dual-Release Dry Suspension.

In this paper, a novel formulation of dual-release dry suspension of mosapride citrate (DRDS-MC) was designed which can be quickly released in the stomach while having sustained-release effect. Co-grinding mixture of mosapride citrate (MC) together with L-HPC as hydrophilic excipient was prepared in order to improve the solubility of MC. The co-grinding mixture was characterized by solubility studies, DSC, X-RD, SEM, FTIR, and size distribution before the preparation of the DRDS-MC. Then, the co-grinding mixture was used to prepare DRDS-MC via wet granulation method. The evaluation of DRDS-MC was focused on physicochemical properties, intestinal absorption, and pharmacokinetics. The results of DSC, X-RD, SEM, FTIR, and size distribution indicated that MC resides in co-grinding mixture with no crystalline changes, hydrogen bonds made L-HPC greatly improving the solubility of MC. Then, the dissolution of DRDS-MC reached 70% in pH 1.2 within 2 h, and the 12-h dissolution of MC in pH 6.8 was nearly 80%. The sedimentation volume after 3 h was 0.94 and redispersibility was good. The linear regression equation between in vitro release of DRDS-MC and intestinal absorption fraction in rats was: Y = 29.215 + 47.535*X (r = 0.952). At last, pharmacokinetic studies in beagle dogs demonstrated that DRDS-MC has prolonged effect compared with commercial formulation Gasmotin as a reference. All results indicated that the DRDS-MC could be quickly released in the stomach while having sustained-release effect.

Development of Valsartan Floating Matrix Tablets Using Low Density Polypropylene Foam Powder: In vitro and In vivo Evaluation.

The main purpose of the study was to develop valsartan floating tablets (VFT) via non-effervescent technique using low density polypropylene foam powder, carbopol, and xanthan gum by direct compression. Before compression, the particulate powdered mixture was evaluated for pre-compression parameters. The prepared valsartan tablets were evaluated for post-compression parameters, swelling index, floating lag time, in vitro buoyancy studies, and in vitro and in vivo X-ray imaging studies in albino rabbits. The result of all formulations for pre- and post-compression parameters were within the limits of USP. FTIR and DSC studies revealed no interaction between the drug and polymers used. The prepared floating tablets had good swelling and floating capabilities for more than 12 h with zero floating lag time. The release of valsartan from optimized formulation NF-2 showed sustained release up to 12 h; which was found to be non-Fickian release. Moreover, the X-ray imaging of optimized formulation (NF-2) revealed that tablet was constantly floating in the stomach region of the rabbit, thereby indicating improved gastric retention time for more than 12 h. Consequently, all the findings and outcomes have showed that developed valsartan matrix tablets could be effectively used for floating drug delivery system.

Formation Mechanism, In vitro and In vivo Evaluation of Dimpled Exenatide Loaded PLGA Microparticles Prepared by Ultra-Fine Particle Processing System.

Spherical poly (D, L-lactic-co-glycolic acid) microparticles (PLGA-MPs) have long been investigated in order to achieve sustained delivery of proteins/peptides. However, the formation mechanism and release characteristics of the specific shape MPs were still unknown. This study aimed to develop a novel-dimpled exenatide-loaded PLGA-MPs (Exe-PLGA-MPs) using an ultra-fine particle processing system (UPPS) and investigate the formation mechanism and release characteristics. Exe-PLGA-MPs were prepared by UPPS and optimized based on their initial burst within the first 24 h and drug release profiles. Physicochemical properties of Exe-PLGA-MPs, including morphology, particle size, and structural integrity of Exe extracted from Exe-PLGA-MPs, were evaluated. Furthermore, pharmacokinetic studies of the optimal formulation were conducted in Sprague-Dawley (SD) rats to establish in vitro-in vivo correlations (IVIVC) of drug release. Exe-PLGA-MPs with dimpled shapes and uniform particle sizes achieved a high encapsulation efficiency (EE%, 91.50 ± 2.65%) and sustained drug release for 2 months in vitro with reduced initial burst (20.42 ± 1.64%). Moreover, the pharmacokinetic studies revealed that effective drug concentration could be maintained for 3 weeks following a single injection of dimpled Exe-PLGA-MPs with high IVIVC. Dimpled PLGA-MPs prepared using the UPPS technique could thus have great potential for sustained delivery of macromolecular proteins/peptides.

Polyacetal-Based Combination Therapy for the Treatment of Prostate Cancer.

The high incidence of prostate carcinogenesis has prompted the search for novel effective treatment approaches. We have employed curcumin (Curc) and diethylstilbestrol (DES) to synthesize a series of polyacetal (PA)-based combination conjugates for prostate cancer (PCa) treatment. Given their bihydroxyl functionalities, Curc and DES molecules were incorporated into a PA mainchain using a one-pot reaction between diols and divinyl ethers. The PA-conjugates released both drugs under acidic conditions, such as those found in the tumor microenvironment, endosomes, or lysosomes, while remaining stable at neutral pH 7.4. The drug ratio was optimized to achieve anticancer drug synergism with elevated cytotoxicity against LNCaP-hormone-dependent human PCa cells conferred via the induction of S phase cell cycle arrest by the upregulation of p53 and CDK inhibitors p21Waf/CIP1 and downregulation of cyclin D1. The application of rationally designed PA-Curc-DES combination conjugates represents a potentially exciting new treatment for prostate cancer.

Preparation, Characterization and Pharmacokinetics Evaluation of the Compound Capsules of Ibuprofen Enteric-Coated Sustained-Release Pellets and Codeine Phosphate Immediate-Release Pellets.

The objective of this study was to prepare ibuprofen enteric-coated sustained-release pellets (IB-SRPs) and codeine phosphate immediate-release pellets (CP-IRPs) to play a synergistic role in analgesia. The pellets were developed by extrusion-spheronization and fluidized bed coating technology. The single-factor investigation was used to determine the optimal prescription and process. The sustained-release membrane of IB-SRPs was water-insoluble ethyl cellulose (EC), triethyl citrate (TEC) was used as plasticizer, and hydroxypropyl methylcellulose (HPMCP) was chose as porogen. Besides, the immediate-release layer of CP-IRPs was gastric-soluble coating film. The ibuprofen and codeine phosphate compound capsules (IB-CP SRCs) were prepared by IB-SRPs and CP-IRPs packed together in capsules with the optimum doses of 200 and 13 mg, respectively. The prepared pellets were evaluated by scanning electron microscopy and dissolution test. Pharmacokinetic studies in beagle dogs indicated that the optimized IB-CP SRCs had smaller individual differences and better reproducibility comparing with commercial available tablets. Additionally, IB-CP SRCs achieved consistency with in vivo and in vitro tests. Therefore, IB-CP SRCs could play a great role in rapid and long-term analgesic.

Design and Evaluation of Hydrophilic Matrix System for pH-Independent Sustained Release of Weakly Acidic Poorly Soluble Drug.

The aim of this research was to design and evaluate a hydrophilic matrix system for sustained release of glipizide, a weakly acidic poor soluble drug. A combination of inclusion complexation and microenvironmental pH modification techniques was utilized to improve the dissolution and pH-independent release of glipizide. Hydroxypropyl-ß-cyclodextrin (HP-ß-CD) was used as the complexation agent while sodium citrate and magnesium oxide (MgO) were used as model pH modifiers. The hydrophilic matrix tablets were prepared by powder direct compression and evaluated by in vitro dissolution study respectively in pH 6.8 and pH 1.2 dissolution media. The formulations containing MgO exhibited increased cumulative drug release from less than 40% in the reference formulation to 90% within 24 h in acidic media (pH 1.2). The release profile in acidic media was similar to the alkaline media (pH 6.8) with a similarity factor (f2) of 55.0, suggesting the weakening of the effect of pH on the dissolution efficiency of glipizide. The release profile fitted well into the Higuchi model and the dominant mechanism of drug release was Fickian diffusion while case II transport/polymer relaxation occurred. In conclusion, combining inclusion complexation agents and pH modifiers had improved the dissolution of glipizide as well as achieved the pH-independent release profile.

Nanostructured lipid carrier-based pH and temperature dual-responsive hydrogel composed of carboxymethyl chitosan and poloxamer for drug delivery.

The aim of this study was to develop a novel nanostructured lipid carrier (NLC) based dual-responsive hydrogel for ocular drug delivery of quercetin (QN). NLC loaded with quercetin (QN-NLC) was prepared using melt-emulsification combined with ultra-sonication technique. A three-factor five-level central composite design (CCD) was employed to optimize the formulation of QN-NLC. The optimized QN-NLC presented a particle size of 75.54nm with narrow size distribution and high encapsulation efficiency (97.14%).QN-NLC was characterized by TEM and DSC. In addition, a pH and temperature dual-responsive hydrogel composed of carboxymethyl chitosan (CMCS) and poloxamer 407(F127) was constructed by a cross-linking reaction with a naturally occurring nontoxic crosslinking agent genipin (GP). FT-IR was employed to demonstrate that F127/CMCS hydrogel was successfully synthesized. The results of SEM analysis and swelling experiments indicated that F127/CMCS hydrogel was both temperature-responsive and pH-responsive. From the results of In vitro release studies, dual temperature and pH responsiveness of the hydrogel was demonstrated, and 80.52% of total quercetin was released from the QN-NLC based hydrogel (QN-NLC-Gel) within 3days, revealing QN-NLC-Gel released drug sustainably. Taken together, the developed NLC-based hydrogel is a promising drug delivery system for the ophthalmic application.

Preparation, Characterization and In Vitro / In Vivo Evaluation of Oral Time-Controlled Release Etodolac Pellets.

The objective of this study was to prepare time-controlled release etodolac pellets to facilitate drug administration according to the body's biological rhythm, optimize the drug's desired effects, and minimize adverse effects. The preparation consisted of three laminal layers from center to outside: the core, the swelling layer, and the insoluble polymer membrane. Factors influenced the core and the coating films were investigated in this study. The core pellets formulated with etodolac, lactose, and sodium carboxymethyl starch (CMS-Na) were prepared by extrusion-spheronization and then coated by a fluidized bed coater. Croscarmellose sodium (CC-Na) was selected as the swelling agent, and ethyl cellulose (EC) as the controlled release layer. The prepared pellets were characterized by scanning electron microscopy and evaluated by a dissolution test and a pharmacokinetic study. Compared with commercial available capsules, pharmacokinetics studies in beagle dogs indicated that the prepared pellets release the drug within a short period of time, immediately after a predetermined lag time. A good correlation between in vitro dissolution and in vivo absorption of the pellets was exhibited in the analysis.

Smart and Fragrant Garment via Surface Modification of Cotton Fabric With Cinnamon Oil/Stimuli Responsive PNIPAAm/Chitosan Nano Hydrogels.

This paper deals with obtaining aromatherapic textiles via applying stimuli-responsive poly N-isopropyl acryl amide (PNIPAAm) /chitosan (PNCS) nano hydrogels containing cinnamon oil on cotton fabric and looks into the treated fabric characteristics as an antibacterial and temperature/pH responsive fabric. The semi-batch surfactant-free dispersion polymerization method was proposed to the synthesis of PNCS nano particles. The incorporation of modified ß -cyclodextrin ( ß -CD) into the PNCS nanohydrogel was performed in order to prepare a hydrophobic(cinnamon oil) carrier embedded in stimuli-responsive nanohydrogel. The ß -CD postloading process of cinnamon oil in to the hydrogel nano particles was performed via ultrasonic bath and exhaustion methods. The antibacterial activity of the treated fabrics at different temperatures demonstrated the preparing new functional bio-antibacterial fabrics with temperature responsiveness.

A multi-controlled drug delivery system based on magnetic mesoporous Fe3O4 nanopaticles and a phase change material for cancer thermo-chemotherapy.

Herein a novel multi-controlled drug release system for doxorubicin (DOX) was developed, in which monodisperse mesoporous Fe3O4 nanoparticles were combined with a phase change material (PCM) and polyethylene glycol 2000 (PEG2000). It is found that the PCM/PEG/DOX mixture containing 20% PEG could be dissolved into water at 42 °C. The mesoporous Fe3O4 nanoparticles prepared by the solvothermal method had sizes of around 25 nm and exhibited a mesoporous microstructure. A simple solvent evaporation process was employed to load the PCM/PEG/DOX mixture on the mesoporous Fe3O4 nanoparticles completely. In the Fe3O4@PCM/PEG/DOX system, the pores of the Fe3O4 nanoparticles were observed to be filled with the mixture of PCM/PEG/DOX. The Fe3O4@PCM/PEG/DOX system showed a saturation magnetization value of 50.0 emu g-1, lower than 71.1 emu g-1 of the mesoporous Fe3O4 nanoparticles, but it was still high enough for magnetic targeting and hyperthermia application. The evaluation on drug release performance indicated that the Fe3O4@PCM/PEG/DOX system achieved nearly zero release of DOX in vitro in body temperature, while around 80% of DOX could be released within 1.5 h at the therapeutic threshold of 42 °C or under the NIR laser irradiation for about 4 h. And a very rapid release of DOX was achieved by this system when applying an alternating magnetic field. By comparing the systems with and without PEG2000, it is revealed that the presence of PEG2000 makes DOX easy to be released from 1-tetradecanol to water, owing to its functions of increasing the solubility of DOX in 1-tetradecanol as well as decreasing the surface tension between water and 1-tetradecanol. The novel drug release system shows great potential for the development of thermo-chemotherapy of cancer treatment.

Plumbagin-loaded aptamer-targeted poly D,L-lactic-co-glycolic acid-b-polyethylene glycol nanoparticles for prostate cancer therapy.

Plumbagin inhibits the growth, metastasis, and invasion of prostate cancer (PCa). However, its lower bioavailability limits biopharmaceutical properties due to insolubility in water. Prostate-specific membrane antigen (PSMA) aptamer-targeted nanoparticles (NPs) significantly enhanced cytotoxicity in prostate epithelial cells. This study aimed to investigate the effects of plumbagin-loaded prostate-specific membrane antigen (PSMA) aptamer-targeted poly D,L-lactic-co-glycolic acid-b-polyethylene glycol (PLGA-PEG) nanoparticles (NPs) on prostate cancer (PCa) in vitro.PLGA-PEG with a terminal carboxylic acid group (PLGA-PEG-COOH) was synthesized, and plumbagin was loaded on PLGA-PEG-COOH NPs using the nanoprecipitation method and characterized by field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), and laser light scattering. The uptake and distribution of plumbagin-NPs in human PCa LNCaP cells were investigated by fluorescent labeling. Subsequently, PSMA antibody-targeted PLGA-PEG-COOH NPs (targeted NPs) were prepared by covalent binding and characterized by x-ray photoelectron spectroscopy. Furthermore, the anticancer activity of plumbagin-loaded, targeted NPs was compared with that of nontargeted NPs in LNCaP cells in vitro.Plumbagin-NPs (diameter of 189.4 ±â€Š30.6 nm and zeta potential of -17.1 ±â€Š3.7 mV) were optimized based on theoretical drug loading of 5% and a ratio of water:acetone of 3:1. During the first 2 hours, the cumulative release rate of the drug was 66.4 ±â€Š8.56%. Moreover, plumbagin-targeted NPs with nitrogen atoms were prepared. The uptake rate was 90% at 0.5 hours for targeted and nontargeted NPs. The IC50 of targeted NPs and nontargeted NPs was 32.59 ±â€Š8.03 µM and 39.02 ±â€Š7.64 µM, respectively.Plumbagin-loaded PSMA aptamer-targeted NPs can be used in targeted chemotherapy against PCa.

Fabrication of core-shell nanofibers for controlled delivery of bromelain and salvianolic acid B for skin regeneration in wound therapeutics.

The physiological and pathological complexity of the wound healing process makes it more challenging to design an ideal tissue regeneration scaffold. Precise scaffolding with high drug loading efficiency, efficient intracellular efficacy for therapeutic delivery, minimal nonspecific cellular and blood protein binding, and maximum biocompatibility forms the basis for an ideal delivery system. This paper describes a combinational multiphasic delivery system, where biomolecules are delivered through the fabrication of coaxial electrospinning of different biocompatible polymers. The ratio and specificity of polymers for specific biofunction are optimized and the delivery system is completely characterized with reference to the mechanical property and structural integrity of bromelain (debridement enzyme) and salvianolic acid B (pro-angiogenesis and re-epithelialization). The in vitro release profile illustrated the sustained release of debriding protease and bioactive component in a timely fashion. The fabricated scaffold showed angiogenic potential through in vitro migration of endothelial cells and increased new capillaries from the existing blood vessel in response to an in ovo chicken chorioallantoic membrane assay. In addition, in vivo studies confirm the efficacy of the fabricated scaffold. Our results therefore open up a new avenue for designing a bioactive combinational multiphasic delivery system to enhance wound healing.