[Application prospect of reaction engineering approach in studying drying behavior of single droplet during spray drying of traditional Chinese medicine].

Spray drying technology is one of the most commonly used unit operations in the production of traditional Chinese medicine(TCM) preparations, offering advantages such as short drying time and uniform product quality. However, due to the properties of TCM extracts, such as high viscosity, strong hygroscopicity, and poor flowability, there is limited scope to solve the problems of wall adhesion and clumping in spray drying from the macroscopic perspective of pharmaceutical production. Therefore, it has become a trend to study and optimize the spray drying process from the microscopic point of view by investigating single droplet evaporation behavior. Based on the reaction engineering approach(REA), the single droplet drying system, as a novel method for studying droplets, collects parameter data on individual TCM droplets during the drying process and uses the REA to process the data and establish predictive models. This approach is crucial for understanding the mechanism of TCM spray drying. This paper summarized and analyzed the cha-racteristics of various single droplet systems, the application of REA in single droplet drying systems, and its significance in optimizing the process, predicting drying states, and shortening the development cycle in the field of TCM spray drying, and looked ahead to the prospects of this method, including the introduction of new parameters and imaging techniques, aiming to provide a reference for further research in the field of TCM spray drying.

Study on Improving the Performance of Traditional Medicine Extracts with High Drug Loading Based on Co-spray Drying Technology.

The purpose of this study is to develop modified particles with different structures to improve the flowability and compactibility of Liuwei Dihuang (LWDH) powder using co-spray drying technology, and to investigate the preparation mechanism of modified particles and their modified direct compaction (DC) properties. Moreover, tablets with high drug loading contents were also prepared. Particles were designed using polyvinylpyrrolidone (PVP K30) and hydroxypropyl methylcellulose (HPMC E3) as shell materials, and sodium bicarbonate (NaHCO3) and ammonium bicarbonate (NH4HCO3) as pore-forming agents. The porous particles (Ps), core-shell particles (CPs), and porous core-shell particles (PCPs) were prepared by co-spray drying technology. The key DC properties and texture properties of all the particles were measured and compared. The properties of co-spray drying liquid were also determined and analyzed. According to the results, Ps showed the least improvement in DC properties, followed by CPs, and PCPs showed a significant improvement. The modifier, because of its low surface tension, was wrapped in the outer layer to form a shell, and the pore-forming agent was thermally decomposed to produce pores, forming core-shell, porous, and porous core-shell composite structures. The smooth surface of the shell structure enhances fluidity, while the porous structure allows for greater compaction space, thereby improving DC properties during the compaction process.

Use of microencapsulated starter cultures by spray drying in coffee under self-induced anaerobiosis fermentation (SIAF).

Using starter culture in liquid form is not economically viable in the coffee fermentation process. This work aimed to compare the fermentative performances of fresh and microencapsulated yeasts in coffee under self-induced anaerobic fermentation (SIAF). The inoculum permanence was monitored, and sugars, alcohols, acids, and volatile compounds were analyzed by chromatography. In addition, sensory analysis was performed on roasted beans. After 180 h of fermentation in the natural process, microencapsulated Torulaspora delbrueckii (MT) (7.97 × 107 cells/g) showed a higher population thanfresh Torulaspora delbrueckii (FT) (1.76 × 107 cells/g). The same acids and volatile compounds were detected in coffees with fresh and microencapsulated yeast. However, the yeast state influenced the concentration of the compounds. In pulped coffee, the coffee inoculated withmicroencapsulated Saccharomyces cerevisiae (MS) obtained the highest concentration of alcohols, esters, pyrazines, and others compared with fresh Saccharomyces cerevisiae (FS), with an increase of up to 47%. Furthermore, the coffee inoculated with MT obtained the highest concentration in almost all chemical classes in both processes compared with FT. These differences ranged up to 55%. Regarding sensory analysis, coffees inoculated with MS showed dominant notes of fruity, caramel, and nuts in the natural process. Otherwise, in pulped process, coffees inoculated with MT showed caramel, honey, and nuts. Therefore, the microencapsulated yeasts were metabolically active and may be considered with commercial potential. Considering the parameters analyzed, the most suitable yeast for natural and pulped processing would be MS and MT, respectively.

Nanoencapsulation of Phenolic Extracts from Native Potato Clones (Solanum tuberosum spp. andigena) by Spray Drying.

Native potato clones grown in Peru contain bioactive compounds beneficial to human health. This study aimed to optimize the spray-drying nanoencapsulation of native potato phenolic extracts utilizing a central composite design and response surface methodology, obtaining the optimal treatment to an inlet temperature of 120 °C and an airflow of 141 L/h in the nano spray dryer B-90, which allowed maximizing the yield of encapsulation, antioxidant capacity (DPPH), encapsulation efficiency (EE), total phenolic compounds, and total flavonoids; on the other hand, it allowed minimizing hygroscopicity, water activity (Aw), and moisture. Instrumental characterization of the nanocapsules was also carried out, observing a gain in lightness, reddening of the color, and spherical nanoparticles of heterogeneous size (133.09-165.13 nm) with a negative ζ potential. Thermal, infrared, and morphological analyses confirmed the encapsulation of the core in the wall materials. Furthermore, an in vitro release study of phenolic compounds in an aqueous solution achieved a maximum value of 9.86 mg GAE/g after 12 h. Finally, the obtained nanocapsules could be used in the food and pharmaceutical industry.

Microcapsules of Sacha Inchi seed oil (Plukenetia volubilis L.) obtained by spray drying as a potential ingredient to formulate functional foods.

Sacha Inchi seed oil (SIO) is rich in omega 3, 6, and 9 fatty acids with important health benefits, but is temperature sensitive. Spray drying is a technology that improves the long-term stability of bioactive compounds. This work aimed to study the effect of three different homogenization techniques on some physical properties and bioavailability of microcapsules of Sacha Inchi seed oil (SIO) emulsions obtained by spray drying. Emulsions were formulated with SIO (5%, w/w), maltodextrin:sodium caseinate as wall material (10%, w/w; 85:15), Tween 20 (1%, w/w) and Span 80 (0.5%, w/w) as surfactants and water up to 100% (w/w). Emulsions were prepared using high-speed (Dispermat D-51580, 18,000 rpm, 10 min), conventional (Mixer K-MLIM50N01, Turbo speed, 5 min), and ultrasound probe (Sonics Materials VCX 750, 35% amplitude, 750 W, 30 min) homogenization. SIO microcapsules were obtained in a Mini Spray B-290 (Büchi) using two inlet temperatures of the drying air (150 and 170 °C). Moisture, density, dissolution rate, hygroscopicity, drying efficiency (EY), encapsulation efficiency (EE), loading capacity, and oil release in digestive fluids in vitro were studied. Results showed that the microcapsules obtained by spray-drying had low moisture values and high encapsulation yield and efficiency values (greater than 50% and 70%, respectively). The thermogravimetric analysis indicates that heat protection was assured, enhancing the shelf life and the ability to withstand thermal food processing. Results suggest that spray-drying encapsulation could be a suitable technology to successfully microencapsulate SIO and enhance the absorption of bioactive compounds in the intestine. This work highlights the use of Latin American biodiversity and spray drying technology to ensure the encapsulation of bioactive compounds. This technology represents an opportunity for the development of new functional foods, improving the safety and quality of conventional foods.

The enzymatic modification of whey-proteins for spray drying encapsulation of Ginkgo-biloba extract.

Ginkgo biloba extract (GBLE) contains many bioactives including flavonoids and terpene trilactones that play some pharmacological roles. These compounds are sensitive to operating conditions; so, encapsulation is a suitable approach to protect them. In this study, different carriers including maltodextrin (MD), and its combination with gum-Arabic (MD-GA), whey protein concentrate (MD-WPC), and whey-protein hydrolysate (MD-HWPC) were used to encapsulate GBLE. Powder production yield, physicochemical/functional characteristics, physical stability and flowability of particles were affected by the type and composition of carriers. FTIR results indicated the placement of phenolic compounds in the carrier matrix. The SEM images also showed the morphological changes of particles (especially the size, indentation and surface shrinkage) under the influence of various carriers. Microencapsulated powders formulated using MD-HWPC showed the highest values of TPC, DPPH, and ABTS and a lighter color which determined the suitability of this wall material (due to the improvement of surface activity and emulsifying properties of protein as a result of partial enzymatic hydrolysis) to protect the antioxidant properties of GBLE during spray-drying, improving the production yield and preserving physical and functional characteristics of the encapsulated powders.

Improvement of Probiotic Viability by Mixing with Ultrasound-Treated Yeast Cells and Spray Drying.

The objective of the study was to determine the efficacy of ultrasound-treatment Saccharomyces cerevisiae and spray drying in preserving the viability of Lactiplantibacillus plantarum. The combination of ultrasound-treated S. cerevisiae and L. plantarum was evaluated. Next, the mixture was blended with maltodextrin and either Stevia rebaudiana-extracted fluid, prior to undergoing spray drying. The L. plantarum viability was assessed after the spray drying process, during storage, and in simulated digestive fluid (SDF) conditions. The results showed that the impact of ultrasound caused the crack and holes in the yeast cell wall. Besides, the moisture content values were not significantly different in all samples after spray drying. Although the amount of powder recovery in stevia-supplemented samples was not higher than that of the control sample, the L. plantarum viability was significantly improved after the spray drying process. The density of L. plantarum tended to be stable during the first 30 days of storage and decreased more rapidly after that. The results reveal that there was no statistically significant difference in the trend of the samples before and after storage. In the SDF test, the L. plantarum viability mixing with ultrasound-treated yeast cells in the spray drying samples was significantly improved. Besides, the presence of Stevia showed positive efficiency on the L. plantarum viability. The L. plantarum viability mixing with ultrasound-treated yeast cells and stevia-extracted fluid by spray drying process showed potential application due to making powder form which helped to improve the L. plantarum stability during the storage time.

Use of maltodextrin, sweet potato flour, pectin and gelatin as wall material for microencapsulating Lactiplantibacillus plantarum by spray drying: Thermal resistance, in vitro release behavior, storage stability and physicochemical properties.

Different plant products and co-products have been studied as wall materials for the microencapsulation of probiotics due to the need for new lost-cost, abundant, and natural materials. In this study, microparticles were developed by spray drying using different combinations of conventional materials such as maltodextrin, pectin, gelatin, and agar-agar with unconventional materials such as sweet potato flour to microencapsulate Lactiplantibacillus plantarum. The microparticles obtained were evaluated for encapsulation efficiency, thermal resistance, and rupture test. The most resistant microparticles were characterized and evaluated for probiotic viability during storage and survival to in vitro gastrointestinal conditions. Microparticles A (10 % maltodextrin, 5 % sweet potato flour, and 1 % pectin) and B (10 % maltodextrin, 4 % sweet potato flour, and 2 % gelatin) showed high thermal resistance (>59 %) and survival in acidic conditions (>80 %). L. plantarum in microparticles A and B remained viable with counts > 6 log CFU.g-1 for 45 days at 8 °C and -18 °C and resisted in vitro gastrointestinal conditions after processing with counts of 8.38 and 9.10 log CFU.g-1, respectively. Therefore, the selected microparticles have great potential for application in different products in the food industry, as they promote the protection and distribution of probiotic microorganisms.

Potato protein: current review of structure, technological properties, and potential application on spray drying microencapsulation.

Studies regarding spray drying microencapsulation are aplenty available; especially focusing on processing parameters, microparticle characteristics and encapsulation efficiency. Hence, there is a rising interest in tailoring wall materials aiming to improve the process's effectiveness. Reflecting a market trend in the food industry, plant-based proteins are emerging as alternative protein sources, and their application adaptability is an increasing research of interest related to consumers' demand for healthy food, product innovation, and sustainability. This review presents a perspective on the investigation of potato protein as a technological ingredient, considering it a nonconventional source obtained as by-product from starch industry. Furthermore, this piece emphasizes the potential application of potato protein as wall material in spray drying encapsulation, considering that this purpose is still limited for this ingredient. The literature reports that vegetal-based proteins might present compromised functionality due to processing conditions, impairing its technological application. Structural modification can offer a potential approach to modify potato protein configuration aiming to improve its utilization. Studies reported that modified proteins can perform as better emulsifiers and antioxidant agents compared to intact proteins. Hence, it is expected that their use in microencapsulation would improve process efficiency and protection of the core material, consequently delivering superior encapsulation performance.

Development of iron-vitamin multilayer encapsulates using 3 fluid nozzle spray drying.

Considering the growing concern of iron and folic acid deficiency, encapsulation of these nutrients and fortification into foods is emerging as an effective counter-strategy. The present work focuses on a scalable approach for the production of iron, ascorbic acid, and folic acid core-shell encapsulates using novel 3-fluid nozzle (3FN) spray drying with whey protein as core and either pectin or hydroxypropyl methylcellulose (HPMC) as shell polymers. The effect of shell formation was observed by comparing core-shell encapsulates with conventional 2-fluid nozzle (2FN) encapsulates. Also, the effect of pH of whey protein on the color of encapsulates is noteworthy; reducing the pH to 4.0 significantly improved the lightness value (52.91 ± 0.13) when compared with the encapsulates with native pH (38.91 ± 0.58). Furthermore, sample with pectin as shell polymer exhibited fair flowability with lowest values of Hausner ratio (1.25 ± 0.04) and Carr's index (20.06 ± 2.71) and highest encapsulation efficiency for folic acid (86.07 ± 5.24%). Whereas, encapsulates having HPMC as shell polymer showed highest lightness value (60.80 ± 0.32) and highest encapsulation efficiency for iron (87.28 ± 4.15%). The formation of core-shell structure was confirmed by evaluation of the surface composition which showed reduced amine bonds and increased aliphatic and carbonyl bonds in the encapsulates prepared by 3FN spray drying. The encapsulates prepared without adjusting whey protein pH showed the least release (∼51 % in 24 h) and bioaccessibility (∼56%) of iron indicating the iron-whey protein complex formation. Based on appearance, smooth surface morphology, flowability, and release behavior, a combination of whey protein and pectin is recommended for co-encapsulation of iron, folic acid and ascorbic acid.

Process optimization of physicochemical properties of spray-dried Hydrocotyle umbellata L. extract

Abstract Hydrocotyle umbellata L., Araliaceae, is a species that is recommended in Ayurvedic medicine for its effects on the central nervous system, such as anxiolytic and memory-stimulant effects. Despite the medicinal potential of this species, its phytopharmaceutical and technological potential to produce standardized extracts has not been investigated. This study analyzes the influence of spray drying parameters on the contents of the chemical markers (total phenolic, total flavonoid, and hibalactone) and the functional properties of H. umbellata extract. The optimization of drying conditions was performed using a central composite design combined with response surface methodology and desirability function approach. The mathematical models fitted to experimental data indicated that all the evaluated drying parameters significantly influenced the chemical contents. The optimal conditions were: inlet temperature of 120 °C, feed flow rate of 4 mL min-1, and colloidal silicon dioxide:maltodextrin ratio of 16%:4%. Under these conditions, the powder samples had spherical particles and desirable physicochemical and functional properties, such as low water activity and moisture content, good product recovery, reconstitution, and flowability. Thus, spray drying might be a promising technique for processing standardized H. umbellata extracts.

Pectin-based color indicator films incorporated with spray-dried Hibiscus extract microparticles.

Colorimetric films incorporated with anthocyanins as an indicator for freshness monitoring have aroused growing interest recently. The pH-sensing colorimetric film were developed based on pectin (HM), containing aqueous hibiscus extract microparticles (HAE). HAE microparticles were obtained by spray drying with different wall materials (Inulin -IN, maltodextrin- MD and their combination). The films were obtained on large scale by continuous casting. These films were characterized for physicochemical analysis, morphological structure, thermal and barrier properties, antioxidant activity, and color change at different pH. The addition of HAE microparticles caused relevant changes to HM-based films, such as in mechanical behavior and improved barrier property (11-22% WVTR reduction) depending on the type of wall material used and the concentration added. It was verified with the thermal stability of films, with a slight increase being observed. The color variation of smart films was entirely pH-dependent. Overall, the proposed color indicator films showed unique features and functionalities and could be used as an alternative natural pH indicator in smart packaging systems.

Encapsulation of anthocyanin-rich extract from black chokeberry (Aronia melanocarpa) pomace by spray drying using different coating materials.

Anthocyanin-rich extract obtained from black chokeberry (Aronia melanocarpa) pomace was microencapsulated with spray drying by using different wall materials, i.e., maltodextrin with dextrose equivalent 6 (MD6), maltodextrin with dextrose equivalent 20 (MD20) and the combination of MD20 with gum Arabic (MD : GA, 15 : 5 w/w), whey protein isolate (MD : WPI, 19 : 1 w/w), and xanthan gum (MD : XG, 19.5 : 0.5 w/w). Spray drying conditions were chosen as follows: inlet temperature of 150 °C, outlet temperature of 90 °C, 4.5 mL min-1 feed flow rate, 0.357 m3 h-1 air flow rate, and an aspirator capacity of 100%. Physicochemical characteristics of the powders such as moisture content, particle size, capsule morphology, color, spray drying yield, encapsulation efficiency, total anthocyanin content, total and individual phenolic content, and total antioxidant activity were investigated. With all the parameters evaluated, MD : GA wall material provided better results particularly in terms of production yield and encapsulation efficiency. To conclude, black chokeberry by-product can be used as a source of polyphenols to produce value-added colored powders with bioactive properties which might have the potential to be used in food, nutraceutical and cosmetic industries.

Microencapsulation of epiphytic coffee yeasts by spray drying using different wall materials: Implementation in coffee medium.

The storage of microorganisms in liquid form is the main drawback of commercializing epiphytic coffee yeasts. This work aimed to evaluate the fermentative performance of microencapsulated yeasts by spray drying in a coffee peel and pulp media (CPM). The yeasts, Saccharomyces cerevisiae CCMA 0543, Torulaspora delbrueckii CCMA 0684, and Meyerozyma caribbica CCMA 1738, were microencapsulated using maltodextrin DE10 (MD), high maltose (MA), and whey powder (WP) as wall materials. A Central Composite Rotational Design (CCRD) was used to investigate the effect of operating parameters on the microcapsules' cell viability, drying yield, and water activity. Yeasts reached cell viability and drying yields above 90 and 50 %, respectively. WP maintained the cell viability of the three yeasts over 90 days of storage at room temperature (25 °C) and was selected as a wall material for the three yeasts. M. caribbica showed to be more sensitive to spray drying and less resistant to storage. Some differences were found in the fermentation of the CPM medium, but the microencapsulated yeasts maintained their biotechnological characteristics. Therefore, the microencapsulation of epiphytic coffee yeasts by spray drying was promising to be used in the coffee fermentation process.

Microencapsulation of blueberry anthocyanins by spray drying with soy protein isolates/high methyl pectin combination: Physicochemical properties, release behavior in vitro and storage stability.

Eleven anthocyanins in the blueberry anthocyanins powders (BAP) were identified and quantified by HPLC-DAD-ESI-MS. BAP microcapsules (MBAP) were produced by spray drying using high methyl pectin (HMP) combined with whey protein isolates (WPI) or soy protein isolates (SPI) in different proportions as wall materials. Generally, SPI/HMP combination was more efficient in increasing the encapsulation efficiency and Tg, and in decreasing the particle size and hygroscopicity of the microcapsules than WPI or HMP or WPI/HMP combination. Microcapsules created with 4% SPI + 2% HMP combination (MBAPc), possessed superior anthocyanin release behavior and antioxidant stability to those produced with 4% SPI alone (MBAPs). Both MBAPc and MBAPs had continuous release of anthocyanins throughout the simulated gastrointestinal digestion, and exhibited two first-order kinetics, but MBAPc exhibited higher stability than MBAPs and BAP, because it showed the longest half-life and the lowest anthocyanin degradation rate at 25 °C and 35 °C during 6-months' storage.

Microencapsulation by spray drying of coffee epiphytic yeasts Saccharomyces cerevisiae CCMA 0543 and Torulaspora delbrueckii CCMA 0684.

The objective of this work was to evaluate the microencapsulation feasibility of Saccharomyces cerevisiae CCMA 0543 and Torulaspora delbrueckii CCMA 0684 in three different compositions of wall material by spray-dryer. The yeasts (109 CFU mL-1) were microencapsulated separately using maltodextrin (15%), maltodextrin (15%) with sucrose (2%), or maltose (2%) as wall material. The viability was evaluated for 6 months at two different temperatures (7 and 25 °C). The yield, cell viability after spray drying, and characterization of the microcapsules were performed. Results indicate that cell viability ranged between 94.06 and 97.97%. After 6 months, both yeasts stored at 7 °C and 25 °C presented 107 and 102 CFU mL-1, respectively. Regarding Fourier-transform infrared spectroscopy analysis, all microencapsulated yeasts presented typical spectra footprints of maltodextrin. After 6 months of storage, S. cerevisiae CCMA 0543 obtained a 10.8% increase in cell viability using maltodextrin with maltose as wall material compared to maltodextrin and maltodextrin with sucrose. However, T. delbrueckii CCMA 0684 obtained a 13.5% increase in cell viability using only maltodextrin. The study showed that maltodextrin as a wall material was efficient in the microencapsulation of yeasts. It is possible to assume that maltose incorporation increased the cell viability of S. cerevisiae CCMA 0543 during storage.

Production of rice bran oil (Oryza sativa L.) microparticles by spray drying taking advantage of the technological properties of cereal co-products.

Microparticles loaded with rice bran oil were produced by spray drying. Rice flour (RF) and rice protein (RP), considered as co-products of the cereal production chain, were tested as stabilizers in the encapsulation process to improve emulsion stability and the properties of the particles. Rice bran oil presented 1.75% É£-oryzanol, a powerful antioxidant with health benefits. AG/RP treatment (10% of rice protein): no phase separation after 24 h, higher zeta potential (-29.09 mV ± 0.67), encapsulation efficiency (73.90% ± 0.22), real density (1.27 g/cm-3), and smaller particle size (8.27 µm ± 0.13). Microparticles containing co-products were the most appropriate to slow down the autooxidation (at 60°C for 8 weeks), especially associated with the use of rice flour. The co-products improve the emulsion characteristics, particle properties and stability of the encapsulated oil. This study presented the technological effects of the use of rice chain co-products, which is in line with the current scenario of sustainability.

Encapsulation of coffee silverskin extracts by foam mat drying and comparison with powders obtained by spray drying and freeze-drying.

Coffee silverskin is a coproduct that has a rich composition in bioactive compounds. However, most of these compounds are susceptible to the conditions used during food processing and storage. Encapsulation is a process of great interest to increase the stability of these bioactive compounds, and different methods can influence the final characteristics of the product. Therefore, this study aimed to evaluate the encapsulation methods by foam mat drying, spray drying and freeze-drying for producing powder from coffee silverskin extracts. Density, porosity, overrun, and stability foam were evaluated and the physicochemical properties of powders, such as water activity, moisture, wettability, hygroscopicity, solubility, color, antioxidant activity, and total phenolic were determined. The optimal condition required for the feed mixture for foam formation was 7.6% gum arabic, 2% maltodextrin, and 10.4% egg albumin. All methods presented powders with desirable values of water activity, moisture content, and hygroscopicity, being considered stable for storage, and high content of bioactive compounds. Higher temperatures for foam mat drying produced powders with higher encapsulation efficiency (>77%) and longer wettability than lower temperatures (50 and 60°C). Therefore, this study verified that foam mat drying can be considered an efficient and promising method for encapsulating bioactive compounds from coffee silverskin extract. PRACTICAL APPLICATION: Foam mat drying can be considered an alternative method to conventional encapsulation by spray drying and freeze-drying. This method is simple, inexpensive, and generates high-quality products. Optimization of foam properties is necessary to ensure successful drying.

Dry Dosage Forms of Add-Value Bioactive Phenolic Compounds by Supercritical CO2-Assisted Spray-Drying.

Every year, grapevine pruning produces huge amounts of residue, 90% of which are from vine shoots. These are a rich source of natural antioxidants, mostly phenolic compounds, which, when properly extracted, can give rise to added-value products. However, their lack of solubility in aqueous media and high susceptibility to thermal and oxidative degradation highly limit their bioavailability. Encapsulation in suitable carriers may have a positive impact on their bioavailability and bioactivity. Previous data on vine-shoot extraction have identified gallic acid (GA) and resveratrol (RSV) as the main phenolic compounds. In this work, model dry powder formulations (DPFs) of GA and RSV using hydroxypropyl cellulose (HPC) as carriers were developed using Supercritical CO2-Assisted Spray Drying (SASD). A 32 full factorial Design of Experiments investigated the solid and ethanol contents to ascertain process yield, particle size, span, and encapsulation efficiency. Amorphous powder yields above 60%, and encapsulation efficiencies up to 100% were achieved, representing excellent performances. SASD has proven to be an efficient encapsulation technique for these phenolic compounds, preserving their antioxidation potential after three months in storage with average EC50 values of 30.6 µg/mL for GA-DPFs and 149.4 µg/mL for RSV-DPF as assessed by the scavenging capacity of the DPPH radical.

[Improvement on compactibility of the alcoholic extract of Zingiberis Rhizoma by co-spray drying with HPMC].

Aiming to solve the poor compactibility of the alcoholic extract of Zingiberis Rhizoma(ZR), this study explored the feasibility of its physical modification using co-spray drying with a small amount of hydroxypropyl methyl cellulose(HPMC). Based on the univariate analysis, the influence of two independent variables(the HPMC content in the product and the solid content of spray material) on the powder properties and tablet properties of the dried product was investigated by the central composite design. With the tensile strength and disintegration time of the tablets as the evaluation indexes, the optimal prescription was determined as follows: the HPMC content was 15% and the solid content of spray material was 25.6%. The accuracy of the regression model established for predicting tensile strength and disintegration time of tablets was verified, and the results revealed that the measured values were close to the predicted ones with deviations of 0.47% and-8.2%, indicating good prediction and reproducibility of the model. The tensile strength(4.24 MPa) of tablets prepared with the optimal prescription was 3.59 times that(1.18 MPa, far lower than the baseline of 2 MPa for qualified tablets) with the spray-dried powder of the ZR. On the other hand, due to the addition of HPMC, the disintegration time of tablets increased from 7.3 min to 24.6 min. On the whole, this study provided a new strategy to solve the common problem of poor compactibility of raw Chinese medicinal materials, which facilitated the successful preparation of Chinese medicinal tablets with high drug loads.