Experimental and computational evidence of U(VI)-OH-Si(OH)4 complexes under alkaline conditions: Implications for cement systems.

The complexation of uranyl hydroxides with orthosilicic acid was investigated by experimental and theoretical methods. Spectroluminescence titration was performed in a glovebox under argon atmosphere at pH 9.2, 10.5 and 11.5, with [U(VI)] = 10-6 and 5 × 10-6 mol kgw-1. The polymerization effects of silicic acid were minimized by ruling out samples with less than 90 % monomeric silicic acid present, identified via UV-Vis spectrometry using the molybdate blue method. Linear regression analysis based on time-resolved laser-induced fluorescence spectroscopy (TRLFS) results yielded the conditional stepwise formation constants of U(VI)-OH-Si(OH)4 complexes at 0.05 mol kgw-1 NaNO3. The main spectroscopic features - characteristic peak positions and decay-time - are reported for the first time for the UO2(OH)2SiO(OH)3- species observed at pH 9.2 and 10.5 and UO2(OH)2SiO2(OH)22- predominant at pH 11.5. Quantum chemical calculations successfully computed the theoretical luminescence spectrum of the complex UO2(OH)2SiO(OH)3- species, thus underpinning the proposed chemical model for weakly alkaline systems. The conditional stability constants were extrapolated to infinite dilution using the Davies equation, resulting in log10ß°(UO2(OH)2SiO(OH)3-) and log10ß°(UO2(OH)2SiO2(OH)22-). Implications for U(VI) speciation in the presence and absence of competing carbonate are discussed for silicate-rich environments expected in certain repository concepts for nuclear waste disposal.

The Possible Role of Anoxic Alkaline High Subcritical Water in the Formation of Ferric Minerals, Methane and Disordered Graphitic Carbon in a BARB3 Drilled Sample of the 3.4 Ga Buck Reef Chert.

The present article reports Raman spectroscopic observations of siderite, hematite, disordered graphitic carbon and possibly greenalite inside the quartz matrix of a banded iron sample from the BARB3 core drilled inside the 3.4 Ga Buck Reef Chert of the Barberton Greenstone Belt in South Africa. The article also reports Raman spectroscopic observations of quartz cavities, concluding in the presence of water, methane and sodium hydroxide at high concentration leading to pH ~ 15 inside the inclusion, suggesting an Archean water which was strongly basic. FeIII-greenalite may also be present inside the inclusion. The possible role of anoxic alkaline high subcritical water in the formation of ferric minerals and the CO required for the synthesis of molecules of biological interest has been demonstrated theoretically since 2013 and summarized in the concept of Geobiotropy. The present article experimentally confirms the importance of considering water in its anoxic strongly alkaline high subcritical domain for the formation of quartz, hematite, FeIII-greenalite, methane and disordered graphitic carbon. Methane is proposed to form locally when the carbon dioxide that is dissolved in the Archean anoxic alkaline high subcritical water, interacts with the molecular hydrogen that is emitted during the anoxic alkaline oxidation of ferrous silicates. The carbon matter is proposed to form as deposition from the anoxic methane-rich fluid. A detailed study of carbon matter from diverse origins is presented in a supplementary file. The study shows that the BARB3_23B sample has been submitted to ~ 335 °C, a temperature of the high subcritical domain, and that the graphitic structure contains very low amounts of oxygen and no hydroxyl functional groups. The importance of considering the structure of water is applied to the constructions of the Neoproterozoic and Archean banded iron formations. It is proposed that their minerals are produced inside chemical reaction chambers containing ferrous silicates, and ejected from the Earth's oceanic crust or upper mantle, during processes involving subduction events or not.

Triple crosslinking conductive hydrogels with digitally printable and outstanding mechanical stability for high-resolution conformable bioelectronics.

Soft, conductive, and stretchable hydrogels offer a broad variety of applications, including skin-interfacing electrodes, biomonitoring patches, and electrostimulation. Despite rapid developments over the last decades, a combination of good electrical and mechanical properties, low-cost fabrication, and biocompatibility is yet to be demonstrated. Also, the current methods for deposition and patterning of these hydrogels are manual, and there is a need toward autonomous and digital fabrication techniques. In this work, we demonstrate a novel Gallium (Ga) embedded sodium-alginate-polyacrylamide-LAPONITE® (Ga-SA-PAAM-La) hydrogel, that is ultra-stretchable (Maximum strain tolerance of∼985%), tough (toughness ∼30 kJ m-3), bio-adhesive (adhesion energy ∼216 J m-2), conductive, and digitally printable. Ga nanoparticles are used as radical initiators. By adjusting the sonication parameters, we control the solution viscosity and curing time, thus allowing us to prepare pre-polymers with the desired properties for casting, or digital printing. These hydrogels benefit from a triple-network structure due to the role of Ga droplets as crosslinkers besides BIS (N,N'-methylene-bis-acrylamide) and LAPONITE®, thus resulting in tough composite hydrogels. The inclusion of LAPONITE® into the hydrogel network improved its electrical conductivity, adhesion, digital printability, and its mechanical properties, (>6× compared to the same hydrogel without LAPONITE®). As electrodes in the electrocardiogram, the signal-to-noise ratio was surprisingly higher than the medical-grade Ag/AgCl electrodes, which are applied for monitoring muscles, heart, respiration, and body joint angle through EMG, ECG, and bioimpedance measurements. The results obtained prove that such digitally printed conductive and tough hydrogels can be used as potential electrodes and sensors in practical applications in the next generation of printed wearable computing devices.

Physicochemical and biological characterization of silica-coated alumina particles.

OBJECTIVES: A tribochemical silica-coating (TSC) method has been developed to improve the adhesion of dental resin composites to various substrates. The method utilizes airborne-particle abrasion using particles having a silica surface and an alumina core. The impact of the TSC method has been extensively studied but less attention has been paid to the characterization of the silica-modified alumina particles. Due to the role of silicate ions in cell biology, e.g. osteoblast function and bone mineralization, silica-modified alumina particles could also be potentially used as a biomaterial in scaffolds of tissue regeneration. Thus, we carried out detailed physicochemical characterization of the silica-modified alumina particles. METHODS: Silica-modified alumina particles (Rocatec, 3 M-ESPE) of an average particle size of 30 µm were studied for the phase composition, spectroscopic properties, surface morphology, dissolution, and the capability to modify the pH of an immersion solution. The control material was alumina without silica modification. Pre-osteoblastic MC3T3-E1 cells were used to assess cell viability in the presence of the particles. Cell viability was tested at 1, 3, 7 and 10 days of culture with various particle quantities. Multivariate ANOVA was used for statistical analyses. RESULTS: Minor quantities of silica enrichment was verified on the surface of alumina particles and the silica did not evenly cover the alumina surface. In the dissolution test, no change in the pH of the immersion solution was observed in the presence of the particles. Minor quantities of silicate ions were dissolved from the particles to the cell culture medium but no major differences were observed in the viability of pre-osteoblastic cells, whether the cells were cultured with silica-modified or plain alumina particles. SIGNIFICANCE: Characterization of silica-modified alumina particles demonstrated differences in the particle surface structure compared to control alumina. Dissolution of silica layer in Tris buffer or SBF solution varied from that of cell culture medium: minor quantities of dissolved Si were observed in cell culture test medium. The cell viability test did not shown significant differences between control alumina and its silica-modified counterpart.

Fabrication and in vitro evaluation of 3D printed porous silicate substituted calcium phosphate scaffolds for bone tissue engineering.

Silicate-substituted calcium phosphate (Si-CaP) ceramics, alternative materials for autogenous bone grafting, exhibit excellent osteoinductivity, osteoconductivity, biocompatibility, and biodegradability; thus, they have been widely used for treating bone defects. However, the limited control over the spatial structure and weak mechanical properties of conventional Si-CaP ceramics hinder their wide application. Here, we used digital light processing (DLP) printing technology to fabricate a novel porous 3D printed Si-CaP scaffold to enhance the scaffold properties. Scanning electron microscopy, compression tests, and computational fluid dynamics simulations of the 3D printed Si-CaP scaffolds revealed a uniform spatial structure, appropriate mechanical properties, and effective interior permeability. Furthermore, compared to Si-CaP groups, 3D printed Si-CaP groups exhibited sustained release of silicon (Si), calcium (Ca), and phosphorus (P) ions. Furthermore, 3D printed Si-CaP groups had more comprehensive and persistent osteogenic effects due to increased osteogenic factor expression and calcium deposition. Our results show that the 3D printed Si-CaP scaffold successfully improved bone marrow mesenchymal stem cells (BMSCs) adhesion, proliferation, and osteogenic differentiation and possessed a distinct apatite mineralization ability. Overall, with the help of DLP printing technology, Si-CaP ceramic materials facilitate the fabrication of ideal bone tissue engineering scaffolds with essential elements, providing a promising approach for bone regeneration.

Carbonated wollastonite - An effective supplementary cementitious material?

Carbonated wollastonite clinker (CS) may be suitable as supplementary cementitious material (SCM) for mortar and concrete. The microstructure of unground CS clinker, carbonated CS slurry and a mortar blended with carbonated CS are investigated by scanning electron microscopy. Additionally, a reference mortar with pure Portland cement and one with a cement replacement level of 30 mass-% by carbonated CS are produced to assess its contribution to compressive strength development. The calcium silicates are decalcified during carbonation resulting in CaCO3 and amorphous SiO2 . The latter reacts when used as SCM in mortar influencing the Ca/Si ratio of calcium-silicate-hydrate and contributing to compressive strength development.

Well-Orientation Strategy Biosynthesis of Cefuroxime-Silver Nanoantibiotic for Reinforced Biodentine™ and Its Dental Application against Streptococcus mutans.

Dental caries results from the bacterial pathogen Streptococcus mutans (S. mutans) and is the maximum critical reason for caries formation. Consequently, the present study aims to evaluate the antibacterial activity of a newly synthesized nanoantibiotic-Biodentine formulation. The silver nanoparticles (ROE-AgNPs) were biosynthesized from the usage of Rosmarinus officinalis L. extract (ROE) and conjugated with cefuroxime to form Cefuroxime-ROE-AgNPs. Using Biodentine™ (BIOD), five groups of dental materials were prepared, in which Group A included conventional BIOD, Group B included BIOD with ROE-AgNPs, Groups C and D included BIOD with Cefuroxime-ROE-AgNPs at concentrations of 0.5% and 1.5% cefuroxime, respectively, and Group E included BIOD with 1.5% cefuroxime. The synthesized ROE-AgNPs or Cefuroxime-ROE-AgNPs were characterized for conjugating efficiency, morphology, particle size, and in vitro release. Minimum inhibitory concentration (MIC) of the cefuroxime, ROE-AgNPs, and Cefuroxime-ROE-AgNPs were additionally evaluated against cefuroxime resistant S. mutans, which furthered antibacterial efficacy of the five groups of dental materials. The UV-Visible spectrum showed the ROE-AgNPs or Cefuroxime-ROE-AgNPs peaks and their formation displayed through transmission electron microscopy (TEM), X-ray diffraction (XRD) pattern, and Fourier transforms infrared (FTIR) analysis. The end result of Cefuroxime-ROE-AgNPs showed conjugating efficiency up to 79%. Cefuroxime-ROE-AgNPs displayed the highest antibacterial efficacy against S. mutans as compared to cefuroxime or ROE-AgNPs alone. Moreover, the MIC of ROE-AgNPs and Cefuroxime-ROE-AgNPs was detected against S. mutans to be 25 and 8.5 µg/mL, respectively. Consequently, Cefuroxime-ROE-AgNPs displayed that a decrease in the MIC reached to more than three-fold less than MIC of ROE-AgNPs on the tested strain. Moreover, Cefuroxime-ROE-AgNPs/BIOD was employed as a novel dental material that showed maximum antimicrobial activity. Groups C and D of novel materials showed inhibitory zones of 19 and 26 mm, respectively, against S. mutans and showed high antimicrobial rates of 85.78% and 91.17%, respectively. These data reinforce the utility of conjugating cefuroxime with ROE-AgNPs to retrieve its efficiency against resistant S. mutant. Moreover, the nanoantibiotic delivered an advantageous antibacterial effect to BIOD, and this may open the door for future conjugation therapy of dental materials against bacteria that cause dental caries.

Borosilicate glass 60Co high dose rate brachytherapy thermoluminescence dosimetry.

Brachytherapy is commonly used in treatment of cervical, prostate, breast and skin cancers, also for oral cancers, typically via the application of sealed radioactive sources that are inserted within or alongside the area to be treated. A particular aim of the various brachytherapy techniques is to accurately transfer to the targeted tumour the largest possible dose, at the same time minimizing dose to the surrounding normal tissue, including organs at risk. The dose fall-off with distance from the sources is steep, the dose gradient representing a prime factor in determining the dose distribution, also representing a challenge to the conduct of measurements around sources. Amorphous borosilicate glass (B2O3) in the form of microscope cover slips is recognized to offer a practicable system for such thermoluminescence dosimetry (TLD), providing for high-spatial resolution (down to < 1 mm), wide dynamic dose range, good reproducibility and reusability, minimal fading, resistance to water and low cost. Herein, investigation is made of the proposed dosimeter using a 1.25 MeV High Dose Rate (HDR) 60Co brachytherapy source, characterizing dose response, sensitivity, linearity index and fading. Analysis of the TL glow curves were obtained using the Tmax-Tstop method and first-order kinetics using GlowFit software, detailing the frequency factors and activation energy.

Use of Fatty Acid Metal Salts for Preventing Maillard Reaction-Driven Browning of Lecithins.

We previously reported that fluid soybean lecithin (SL) undergoes heat deterioration by the newly reported pseudo-Maillard rearrangement reaction. To inhibit heat deterioration, SLs were treated with metal silicates, such as magnesium silicate and calcium silicate. When soybean fatty acid was added to SL before treatment with calcium silicate, the color index after heating improved significantly as the acid value increased from 10 to 35 mg KOH/g. To elucidate the role of soybean fatty acid, calcium silicate treatment was carried out by adding several fatty acids to SL. Although saturated fatty acids had no effect on the heat deterioration of SL, unsaturated fatty acids were significantly more effective at inhibiting heat deterioration. Furthermore, for unsaturated fatty acids, it was confirmed that the calcium concentration increased in SL. Based on these results, several fatty acid metal salts were added to confirm whether heat deterioration while heating SL could be inhibited. It was observed that the heat deterioration of SL could be inhibited with fatty acid metal salts, regardless of whether the fatty acids were saturated or unsaturated and whether the metal was monovalent, divalent, or trivalent. Therefore, in this study, we clarified that the heat deterioration of SL could be inhibited by adding fatty acid metal salts to SL. Among sodium stearate, calcium stearate, magnesium stearate, barium stearate, and aluminum tristearate, the divalent fatty acid metal salts had a stronger inhibitory effect on heat deterioration than the monovalent and trivalent salts.

Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions.

The biodegradable metals, including magnesium (Mg), are a convenient alternative to permanent metals but fast uncontrolled corrosion limited wide clinical application. Formation of a barrier coating on Mg alloys could be a successful strategy for the production of a stable external layer that prevents fast corrosion. Our research was aimed to develop an Mg stable oxide coating using plasma electrolytic oxidation (PEO) in silicate-based solutions. 99.9% pure Mg alloy was anodized in electrolytes contained mixtures of sodium silicate and sodium fluoride, calcium hydroxide and sodium hydroxide. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), contact angle (CA), Photoluminescence analysis and immersion tests were performed to assess structural and long-term corrosion properties of the new coating. Biocompatibility and antibacterial potential of the new coating were evaluated using U2OS cell culture and the gram-positive Staphylococcus aureus (S. aureus, strain B 918). PEO provided the formation of a porous oxide layer with relatively high roughness. It was shown that Ca(OH)2 was a crucial compound for oxidation and surface modification of Mg implants, treated with the PEO method. The addition of Ca2+ ions resulted in more intense oxidation of the Mg surface and growth of the oxide layer with a higher active surface area. Cell culture experiments demonstrated appropriate cell adhesion to all investigated coatings with a significantly better proliferation rate for the samples treated in Ca(OH)2-containing electrolyte. In contrast, NaOH-based electrolyte provided more relevant antibacterial effects but did not support cell proliferation. In conclusion, it should be noted that PEO of Mg alloy in silicate baths containing Ca(OH)2 provided the formation of stable biocompatible oxide coatings that could be used in the development of commercial degradable implants.

On the production of ancient Egyptian blue: Multi-modal characterization and micron-scale luminescence mapping.

The ancient pigment Egyptian blue has long been studied for its historical significance; however, recent work has shown that its unique visible induced luminescent property can be used both to identify the pigment and to inspire new materials with this characteristic. In this study, a multi-modal characterization approach is used to explore variations in ancient production of Egyptian blue from shabti statuettes found in the village of Deir el-Medina in Egypt (Luxor, West Bank) dating back to the New Kingdom (18th-20th Dynasties; about 1550-1077 BCE). Using quantitative SEM-EDS analysis, we identify two possible production groups of the Egyptian blue and demonstrate the presence of multiple phases within samples using cluster analysis and ternary diagram representations. Using both macro-scale non-invasive (X-rays fluorescence and multi-spectral imaging) and micro-sampling (SEM-EDS and Raman confocal microspectroscopy) techniques, we correlate photoluminescence and chemical composition of the ancient samples. We introduce Raman spectroscopic imaging as a means to capture simultaneously visible-induced luminesce and crystal structure and utilize it to identify two classes of luminescing and non-luminescing silicate phases in the pigment that may be connected to production technologies. The results presented here provide a new framework through which Egyptian blue can be studied and inform the design of new materials based on its luminescent property.

Highly ordered functionalized mesoporous silicate nanoparticles reinforced poly (lactic acid) gatekeeper surface for infection treatment.

The controlled release of a drug considers the key feature of the delivery carrier that enhances therapeutic efficacy. This study was aimed at design, synthesis of nano valve and capping systems onto caged functionalized mesoporous silica nanoparticles (SBA15) with nanoflowers polylactic acid (PLA-NF). Levofloxacin (LVX) as a specific model drug was encapsulated onto series; SBA15, SBA15@NH2, and SBA15@NH2/PLA. The examined nanocarriers released in a controlled fashion by external stimuli. The delivery vehicle based on PLA-NF coated SBA15@NH2, potent conjugated with LVX with experienced a high extent of trapping content with fast releasing by pH regulating mechanism. In vial LVX released profile and in vitro antifungal forceful of the selected microbes were detected. However, SBA15@NH2/PLA exhibited pore size, surface area and pore volume 5.4 nm, 163 and 0.011 respectively, but the significantly clear zone was obtained with Staphylococcus aureus ATCC 6538 (G+ve), Escherichia coli ATCC 25922 (G-ve), Candida albicans ATCC 10231 (yeast) and Aspergillus niger NRRL A-326 (fungus). Viability test avouch that rising functionality enhanced cytocompatibility and non-toxicity profile. Based on the aforementioned promising data, this type of nanocarriers offers when functionalized with targeting cells, the accessibility to deliver antibiotics onto nanosystem for increased potency against microbes and reduce side effects.

The interweaving roles of mineral and microbiome in shaping the antibacterial activity of archaeological medicinal clays.

ETHNOPHARMACOLOGICAL RELEVANCE: Medicinal Earths (MEs), natural aluminosilicate-based substances (largely kaolinite and montmorillonite), have been part of the European pharmacopoeia for well over two millennia; they were used generically as antidotes to 'poison'. AIM OF THE STUDY: To test the antibacterial activity of three Lemnian and three Silesian Earths, medicinal earths in the collection of the Pharmacy Museum of the University of Basel, dating to 16th-18th century and following the methodology outlined in the graphical abstract. To compare them with natural clays of the same composition (reference clays) and synthetic clays (natural clays spiked with elements such as B, Al, Ti and Fe); to assess the parameters which drive antibacterial activity, when present, in each group of samples. MATERIALS AND METHODS: a total of 31 samples are investigated chemically (ICP-MS), mineralogically (both bulk (XRD) and at the nano-sized level (TEM-EDAX)); their organic load (bacterial and fungal) is DNA-sequenced; their bioactivity (MIC60) is tested against Gram-positive, S. aureus and Gram-negative, P. aeruginosa. RESULTS: Reference smectites and kaolinites show no antibacterial activity against the above pathogens. However, the same clays when spiked with B or Al (but not with Ti or Fe) do show antibacterial activity. Of the six MEs, only two are antibacterial against both pathogens. Following DNA sequencing of the bioactive MEs, we show the presence within of a fungal component, Talaromyces sp, a fungus of the family of Trichocomaceae (order Eurotiales), historically associated with Penicillium. Talaromyces is a known producer of the exometabolite bioxanthracene B, and in an earlier publication we have already identified a closely related member of the bioxanthracene group, in association with one of the LE samples examined here. By linking fungus to its exometabolite we suggest that this fungal load may be the key parameter driving antibacterial activity of the MEs. CONCLUSIONS: Antibacterial activity in kaolinite and smectite clays can arise either from spiking natural clays with elements like B and Al, or from an organic (fungal) load found only within some archaeological earths. It cannot be assumed, a priori, that this organic load was acquired randomly and as a result of long-term storage in museum collections. This is because, at least in the case of medicinal Lemnian Earth, there is historical evidence to suggest that the addition of a fungal component may have been deliberate.

An open source and reduce expenditure ROS generation strategy for chemodynamic/photodynamic synergistic therapy.

The therapeutic effect of reactive oxygen species (ROS)-involved cancer therapies is significantly limited by shortage of oxy-substrates, such as hypoxia in photodynamic therapy (PDT) and insufficient hydrogen peroxide (H2O2) in chemodynamic therapy (CDT). Here, we report a H2O2/O2 self-supplying nanoagent, (MSNs@CaO2-ICG)@LA, which consists of manganese silicate (MSN)-supported calcium peroxide (CaO2) and indocyanine green (ICG) with further surface modification of phase-change material lauric acid (LA). Under laser irradiation, ICG simultaneously generates singlet oxygen and emits heat to melt the LA. The exposed CaO2 reacts with water to produce O2 and H2O2 for hypoxia-relieved ICG-mediated PDT and H2O2-supplying MSN-based CDT, acting as an open source strategy for ROS production. Additionally, the MSNs-induced glutathione depletion protects ROS from scavenging, termed reduce expenditure. This open source and reduce expenditure strategy is effective in inhibiting tumor growth both in vitro and in vivo, and significantly improves ROS generation efficiency from multi-level for ROS-involved cancer therapies.

Design of a Multifunctional Biomaterial Inspired by Ancient Chinese Medicine for Hair Regeneration in Burned Skin.

In deep burn injuries, the dermis of the skin is often severely damaged, and hair follicles are also lost and lose the potential for regeneration. Therefore, the development of wound dressings that promote hair follicle regeneration has important clinical significance. In this study, inspired by an ancient Chinese medicine prescription, a novel fibrous membrane (P/Qu/Cup; P, PCL; Qu, quercetin; Cup, cuprorivaite, CaCuSi4O10) containing quercetin-copper (Qu-Cu) chelates was fabricated by using quercetin and a highly bioactive bioceramic (CaCuSi4O10) incorporated in PCL/gelatin electrospun fibers. The fibrous membrane can effectively release Qu and Cu ions to induce proliferation, migration, and differentiation of skin and hair follicle related cells, and the Qu, Cu ions, and Si ions released from the composite membrane revealed synergistic activity to stimulate hair follicle regeneration and wound healing. Our study demonstrated that the analysis of the common components in ancient Chinese prescription is an effective approach to design novel bioactive materials for regenerative medicine.

Combined artificial high-silicate medium and LED illumination promote carotenoid accumulation in the marine diatom Phaeodactylum tricornutum.

BACKGROUND: Diatoms, which can accumulate large amounts of carotenoids, are a major group of microalgae and the dominant primary producer in marine environments. Phaeodactylum tricornutum, a model diatom species, acquires little silicon for its growth although silicon is known to contribute to gene regulation and play an important role in diatom intracellular metabolism. In this study, we explored the effects of artificial high-silicate medium (i.e. 3.0 mM sodium metasilicate) and LED illumination conditions on the growth rate and pigment accumulation in P. tricornutum, which is the only known species so far that can grow without silicate. It's well known that light-emitting diodes (LEDs) as novel illuminants are emerging to be superior monochromatic light sources for algal cultivation with defined and efficient red and blue lights. RESULTS: Firstly, we cultivated P. tricornutum in a synthetic medium supplemented with either 0.3 mM or 3.0 mM silicate. The morphology and size of diatom cells were examined: the proportion of the oval and triradiate cells decreased while the fusiform cells increased with more silicate addition in high-silicate medium; the average length of fusiform cells also slightly changed from 14.33 µm in 0.3 mM silicate medium to 12.20 µm in 3.0 mM silicate medium. Then we cultivated P. tricornutum under various intensities of red light in combination with the two different levels of silicate in the medium. Higher biomass productivity also achieved in 3.0 mM silicate medium than in 0.3 mM silicate medium under red LED light irradiation at 128 µmol/m2/s or higher light intensity. Increasing silicate reversed the down-regulation of fucoxanthin and chlorophyll a under high red-light illumination (i.e. 255 µmol/m2/s). When doubling the light intensity, fucoxanthin content decreased under red light but increased under combined red and blue (50:50) lights while chlorophyll a content reduced under both conditions. Fucoxanthin accumulation and biomass productivity increased with enhanced red and blue (50:50) lights. CONCLUSION: High-silicate medium and blue light increased biomass and fucoxanthin production in P. tricornutum under high light conditions and this strategy may be beneficial for large-scale production of fucoxanthin in diatoms.

Improvement of the Bonding Properties of Mineral Trioxide Aggregate by Elastin-Like Polypeptide Supplementation.

INTRODUCTION: Elastin-like polypeptide (ELP) supplementation was previously reported to enhance the physical properties of mineral trioxide aggregate (MTA). The aim of this study was to investigate the effect of ELP supplementation on the bonding properties of MTA to dentin. METHODS: Two types of ELPs were synthesized and mixed with MTA in a 0.3 liquid/powder ratio. The push-out bond strength test and interfacial observation with scanning electron microscopy were performed for ELP-supplemented MTA. The porosity of MTA fillings in the cavity was observed with microcomputed tomography. The stickiness, flow rate, and contact angle were additionally measured for potential increased bonding properties. RESULTS: ELP supplementation improved the bond strength of MTA to dentin. MTA supplemented by a specific ELP exhibited a less porous structure, higher stickiness, and higher flow rate. ELPs also decreased the contact angle to dentin. CONCLUSIONS: This research data verifies that ELP improves the bonding properties of MTA to a tooth structure. The sticky and highly flowable characteristics of ELP-supplemented MTA may provide intimate contact with dentin and supply a less porous cement structure, which might improve the bonding properties of MTA.

Nanostructured clay particles supplement orlistat action in inhibiting lipid digestion: An in vitro evaluation for the treatment of obesity.

Obesity is a rapidly growing epidemic, with over one-third of the global population classified as overweight or obese. Consequently, an urgent need exists to develop innovative approaches and technologies that regulate energy uptake, to curb the rising trend in obesity statistics. In this study, nanostructured clay (NSC) particles, fabricated by spray drying delaminated dispersions technologies that regulate energy uptake, to curb the rising trend in obesity statistics. In this study, nanostructured clay (NSC) particles, fabricated by spray drying delaminated dispersions of commercial clay platelets (Veegum® HS and LAPONITE® XLG), were delivered as complimentary, bioactive excipients with the potent lipase inhibitor, orlistat, for the inhibition of fat (lipid) hydrolysis. Simulated intestinal lipolysis studies were performed by observing changes in free fatty acid concentration and revealed that a combinatorial effect existed when NSC particles were co-administered with orlistat, as evidenced by a 1.2- to 1.6-fold greater inhibitory response over 60 min, compared to dosing orlistat alone. Subsequently, it was determined that a multifaceted approach to lipolysis inhibition was presented, whereby NSC particles adsorbed high degrees of lipid (up to 80% of all lipid species present in lipolysis media) and thus physically shielded the lipid-in-water interface from lipase access, while orlistat covalently attached and blocked the lipase enzyme active site. Thus, the ability for NSC particles to enhance the biopharmaceutical performance and potency of orlistat is hypothesised to translate into promising in vivo pharmacodynamics, where this novel approach is predicted to lead to considerably greater weight reductions for obese patients, compared to dosing orlistat alone.

Effect of sodium hypochlorite and chlorhexidine irrigating solutions and their inactivating agents on the push-out bond strength of mineral trioxide aggregate.

The objective of this study was to evaluate the effect of sodium hypochlorite and chlorhexidine solutions and their inactivating agents on the push-out bond strength of mineral trioxide aggregate (MTA). One hundred fifty root slices were prepared and their root canal spaces were enlarged using diamond burs. MTA was prepared and compacted to root canal spaces. The samples were randomly separated to 4 groups that would be immersed into the selected solutions (5.25% sodium hypochlorite (NaOCl), 5.25% NaOCl and sodium thiosulfate, 2% chlorhexidine (CHX), 2% CHX and a mixture of Tween 80 and 0.3% L-alfa-lecithin) and a control group (n = 30). Push-out bond strength of each specimen was tested with universal testing machine. The data was analyzed by one-way analysis of variance and Tukey tests. There were no significant differences between the push-out bond strength values of the irrigation groups and the control group. A significant difference was found between the push-out bond strength values of NaOCl-Sodium thiosulfate and CHX-L-alpha-lecithin groups. Contact with NaOCl and its neutralizing agent with MTA after 10 minutes of setting period increased the push-out bond strength of MTA. On the other hand, any contact with CHX alone or with subsequent application using L-alfa-lecithin should be avoided since that might decrease the push-out bond strength of freshly mixed MTA.

Mineralogy, Structure, and Habitability of Carbon-Enriched Rocky Exoplanets: A Laboratory Approach.

Carbon-enriched rocky exoplanets have been proposed to occur around dwarf stars as well as binary stars, white dwarfs, and pulsars. However, the mineralogical make up of such planets is poorly constrained. We performed high-pressure high-temperature laboratory experiments (P = 1-2 GPa, T = 1523-1823 K) on chemical mixtures representative of C-enriched rocky exoplanets based on calculations of protoplanetary disk compositions. These P-T conditions correspond to the deep interiors of Pluto- to Mars-sized planets and the upper mantles of larger planets. Our results show that these exoplanets, when fully differentiated, comprise a metallic core, a silicate mantle, and a graphite layer on top of the silicate mantle. Graphite is the dominant carbon-bearing phase at the conditions of our experiments with no traces of silicon carbide or carbonates. The silicate mineralogy comprises olivine, orthopyroxene, clinopyroxene, and spinel, which is similar to the mineralogy of the mantles of carbon-poor planets such as the Earth and largely unaffected by the amount of carbon. Metals are either two immiscible iron-rich alloys (S-rich and S-poor) or a single iron-rich alloy in the Fe-C-S system with immiscibility depending on the S/Fe ratio and core pressure. We show that, for our C-enriched compositions, the minimum carbon abundance needed for C-saturation is 0.05-0.7 wt% (molar C/O ∼0.002-0.03). Fully differentiated rocky exoplanets with C/O ratios more than that needed for C-saturation would contain graphite as an additional layer on top of the silicate mantle. For a thick enough graphite layer, diamonds would form at the bottom of this layer due to high pressures. We model the interior structure of Kepler-37b and show that a mere 10 wt% graphite layer would decrease its derived mass by 7%, which suggests that future space missions that determine both radius and mass of rocky exoplanets with insignificant gaseous envelopes could provide quantitative limits on their carbon content. Future observations of rocky exoplanets with graphite-rich surfaces would show low albedos due to the low reflectance of graphite. The absence of life-bearing elements other than carbon on the surface likely makes them uninhabitable.