Phycocyanin, a super functional ingredient from algae; properties, purification characterization, and applications.

Phycocyanins (PCYs) are a group of luxuriant bioactive compounds found in blue-green algae with an estimated global market of about US$250 million within this decade. The multifarious markets of PCYs noted by form (e.g. powder or aqueous forms), by grade (e.g. analytical, cosmetic, or food grades), and by application (such as biomedical, diagnostics, beverages, foods, nutraceuticals and pharmaceuticals), show that the importance of PCYs cannot be undermined. In this comprehensive study, an overview on PCY, its structure, and health-promoting features are diligently discussed. Methods of purification including chromatography, ammonium sulfate precipitation and membrane filtration, as well as characterization and measurement of PCYs are described. PCYs could have many applications in food colorants, fluorescent markers, nanotechnology, nutraceutical and pharmaceutical industries. It is concluded that PCYs offer significant potentials, although more investigations regarding its purity and safety are encouraged.

The Quality of Ciders Depends on the Must Supplementation with Mineral Salts.

Providing yeast with the right amount of mineral salts before fermentation can contribute to improving the entire technological process, resulting in a better-quality final product. The aim of this study was to assess the impact of apple must supplementation with mineral salts ((NH4)2SO4, MgSO4, (NH4)3PO4)) on enological parameters, antioxidant activity, total polyphenol content, and the profile of volatile cider compounds fermented with various yeast strains. Rubin cultivar must was inoculated with wine, cider, and distillery or wild yeast strains. Various mineral salts and their mixtures were introduced into the must in doses from 0.167 g/L to 0.5 g/L. The control sample consisted of ciders with no added mineral salts. The basic enological parameters, antioxidant properties, total polyphenol content, and their profile, as well as the composition of volatile compounds, were assessed in ciders. Must supplementation with magnesium salts significantly influenced the use of the analyzed element by yeast cells and was dependent on the yeast strain. In supplemented samples, a decrease in alcohol concentration and total acidity, as well as an increase in the content of extract and total polyphenols, was observed compared to the controls. The addition of ammonium salts caused a decrease in the amount of higher alcohols and magnesium salts, as well as a decrease in the concentration of some esters in ciders.

Simultaneous extraction and enrichment of polyphenol and lutein from marigold (Tagetes erecta L.) flower by an enzyme-assisted ethanol/ammonium sulfate system.

Enzyme-assisted aqueous two-phase extraction (EA-ATPE) using ethanol/ammonium sulfate system was investigated for total polyphenol (TP) and lutein from marigold flowers. The important factors were investigated by single factor experiment and response surface methodology combined with Box-Behnken design to optimize the operating parameters of EA-ATPE. The maximum yields of TP and lutein were 83.56 ± 0.69 mg g-1 and 5.59 ± 0.13 mg g-1, respectively. Compared with aqueous two-phase extraction and Soxhlet extraction (SE), the extraction yield of TP by EA-ATPE is 64.91% higher and the extract of EA-ATPE has better antioxidant activity. The pretreatment effect was also researched by scanning electron microscopy. Thus, EA-ATPE is an efficient method for extracting bioactive components from plants.

Effect of inorganic salt on partition of high-polarity parishins in two-phase solvent systems and separation by high-speed counter-current chromatography from Gastrodia elata Blume.

Parishins are high-polarity and major bioactive constituents in Gastrodia elata Blume. In this study, the effect of several inorganic salts on the partition of parishins in two-phase solvent systems was investigated. Adding ammonium sulfate, which has a higher solubility in water, was found to significantly promote the partition of parishins in the upper organic polar solvents. Based on the results, a two-phase solvent system composed of butyl alcohol/acetonitrile/near-saturated ammonium sulfate solution/water (1.5:0.5:1.2:1, v/v/v/v) was used for the purification of parishins by high-speed counter-current chromatography. Fractions obtained from high-speed counter-current chromatography were subjected to semi-preparative high-performance liquid chromatography to remove salt and impurities. As a result, parishin E (6.0 mg), parishin B (7.8 mg), parishin C (3.2 mg), gastrodin (15.3 mg), and parishin A (7.3 mg) were isolated from water extract of Gastrodia elata Blume (400 mg). These results demonstrated that adding inorganic salt that has high solubility in water to the two-phase solvent system in high-speed counter-current chromatography was a suitable approach for the purification of high-polarity compounds.

Purification and properties of Manganese Superoxide Dismutase (MnSOD) from Tamarix aphylla L.

Superoxide dismutase (SOD) of the Tamarix aphylla leaves were detected at optimum conditions that collected in April, May and June. Results indicated the specific activity in the crude extract reaching to 36.76 unit/ mg protein. Crude SOD was purified by several techniques, precipitation with ammonium sulfate (50-75) %, Ion exchange chromatography using DEAE-cellulose and two steps of size exclusion chromatography on sephacryl S-200 column. The obtained specific activity (310 unit/mg protein) and purification fold 7.91. The purified enzyme revealed one band by SDS-polyacrylamide gel electrophoresis with molecular mass 85.703 kDa. while 89.125 kDa by Sephacryl S-200. The optimal pH and temperature for enzyme activity were 7.5, and 50ºC respectively. EDTA, SDS and NaN3 reduced activity, contrariwise of H2O2 and KCN, pointed to the studied SOD is MnSOD. Michalis constant Km and maximum velocity Vmax values were 0.016 mM and 55.86 mM/min, respectively by using Pyrogallol as substrate. According to the results, we conclude Tamarix aphylla produce MnSOD which can have purified by serial purification techniques for better activity and characterized for further studies.

Optimization of Ultrasonic-Assisted Aqueous Two-Phase Extraction of Phloridzin from Malus Micromalus Makino with Ethanol/Ammonia Sulfate System.

Application of an aqueous two-phase system (ATPS) coupled with ultrasonic technology for the extraction of phloridzin from Malus micromalus Makino was evaluated and optimized by response surface methodology (RSM). The ethanol/ammonium sulfate ATPS was selected for detailed investigation, including the phase diagram, effect of phase composition and extract conditions on the partition of phloridzin, and the recycling of ammonium sulfate. In addition, the evaluation of extraction efficiency and the identification of phloridzin were investigated. The optimal partition coefficient (6.55) and recovery (92.86%) of phloridzin were obtained in a system composed of 35% ethanol (w/w) and 16% (NH4 )2 SO4 (w/w), 51:1 liquid-to-solid ratio, and extraction temperature of 36 °C. Comparing with the traditional solvent extraction with respective 35% and 80% ethanol, ultrasonic-assisted aqueous two-phase extraction (UAATPE) strategy had significant advantages with lower ethanol consumption, less impurity of sugar and protein, and higher extracting efficiency of phloridzin. Our result indicated that UAATPE was a valuable method for the extraction and preliminary purification of phloridzin from the fruit of Malus micromalus Makino, which has great potential in the deep processing of Malus micromalus Makino industry to increase these fruits' additional value and drive the local economic development.

Aqueous two-phase assisted by ultrasound for the extraction of anthocyanins from Lycium ruthenicum Murr.

In this study, an efficient ultrasound-assisted aqueous two-phase extraction method was used for the extraction of anthocyanins from Lycium ruthenicum Murr. An ethanol/ammonium sulfate system was chosen for the aqueous two-phase system due to its fine partitioning and recycling behaviors. Single-factor experiments were conducted to determine the optimized composition of the system, and the response surface methodology was used for the further optimization of the ultrasound-assisted aqueous two-phase extraction. The optimal conditions were as follows: a salt concentration of 20%, an ethanol concentration of 25%, an extraction time of 33.7 min, an extraction temperature of 25°C, a liquid/solid ratio of 50:1 w/w, pH value of 3.98, and an ultrasound power of 600 W. Under the above conditions, the yields of anthocyanins reached 4.71 mg/g dry sample. For the further purification, D-101 resin was used, and the purity of anthocyanins reached 25.3%. In conclusion, ultrasound-assisted aqueous two-phase extraction was an efficient, ecofriendly, and economical method, and it may be a promising technique for extracting bioactive components from plants.

Antibacterial serine protease from Wrightia tinctoria: Purification and characterization.

A serine protease was purified from the leaves of Wrightia tinctoria by sequential flow through method comprising screening, optimization, ammonium sulfate precipitation, gel filtration and ion exchange column chromatography. The yield and purification fold obtained were 11.58% and 9.56 respectively. A single band of serine protease was visualized on SDS-PAGE and 2-D gel electrophoretic analyses were revealed with the molecular mass of 38.5 kDa. Serine protease had an optimum pH of 8.0 and was stable at 45°C with high relative protease activity. The addition of metal ions such as Mg2+ and Mn2+ exhibits a high relative activity. Serine protease had a potent antibacterial activity against both Gram-positive and Gram-negative bacteria. A 10 µg/ml of serine protease was tested against S. aureus, M. luteus, P. aeruginosa and K. pneumoniae which had 21, 20, 18 and 17 mm of zone of inhibition respectively. Serine protease from W. tinctoria degrades the peptidoglycan layer of bacteria which was visualized by transmission electron microscopic analysis.

Salting-out extraction of allicin from garlic (Allium sativum L.) based on ethanol/ammonium sulfate in laboratory and pilot scale.

Salting-out extraction (SOE) based on lower molecular organic solvent and inorganic salt was considered as a good substitute for conventional polymers aqueous two-phase extraction (ATPE) used for the extraction of some bioactive compounds from natural plants resources. In this study, the ethanol/ammonium sulfate was screened as the optimal SOE system for the extraction and preliminary purification of allicin from garlic. Response surface methodology (RSM) was developed to optimize the major conditions. The maximum extraction efficiency of 94.17% was obtained at the optimized conditions for routine use: 23% (w/w) ethanol concentration and 24% (w/w) salt concentration, 31g/L loaded sample at 25°C with pH being not adjusted. The extraction efficiency had no obvious decrease after amplification of the extraction. This ethanol/ammonium sulfate SOE is much simpler, cheaper, and effective, which has the potentiality of scale-up production for the extraction and purification of other compounds from plant resources.

Optimization of ultrasound-assisted aqueous two-phase system extraction of polyphenolic compounds from Aronia melanocarpa pomace by response surface methodology.

Aronia melanocarpa berries are abundant in polyphenolic compounds. After juice production, the pomace of pressed berries still contains a substantial amount of polyphenolic compounds. For efficient utilization of A. melanocarpa berries and the enhancement of polyphenolic compound yields in Aronia melanocarpa pomace (AMP), total phenolics (TP) and total flavonoids (TF) from AMP were extracted, using ultrasound-assisted aqueous two-phase system (UAE-ATPS) extraction method. First, the influences of ammonium sulfate concentration, ethanol-water ratio, ultrasonic time, and ultrasonic power on TP and TF yields were investigated. On this basis, process variables such as ammonium sulfate concentration (0.30-0.35 g mL-1), ethanol-water ratio (0.6-0.8), ultrasonic time (40-60 min), and ultrasonic power (175-225 W) were further optimized by implementing Box-Benhnken design with response surface methodology. The experimental results showed that optimal extraction conditions of TP from AMP were as follows: ammonium sulfate concentration of 0.324 g mL-1, ethanol-water ratio of 0.69, ultrasonic time of 52 min, and ultrasonic power of 200 W. Meanwhile, ammonium sulfate concentration of 0.320 g mL-1, ethanol-water ratio of 0.71, ultrasonic time of 50 min, and ultrasonic power of 200 W were determined as optimum extraction conditions of TF in AMP. Experimental validation was performed, where TP and TF yields reached 68.15 ± 1.04 and 11.67 ± 0.63 mg g-1, respectively. Close agreement was found between experimental and predicted values. Overall, the present results demonstrated that ultrasound-assisted aqueous two-phase system extraction method was successfully used to extract total phenolics and flavonoids in A. melanocarpa pomace.

Polarity, selectivity and performance of hydrophilic organic/salt-containing aqueous two-phase system on counter-current chromatography for polar compounds.

The essential attributes of a solvent system for separation polar compounds on CCC are polarity, selectively and performance. Here, hydrophilic organic/salt-containing aqueous two-phase system (HO/S TPS) was evaluated as an alternative solvent system for CCC separation of polar compounds. Polarity measurements based on Rohrschneider-Snyder parameter was developed as quantitative assessing the polarity of HO/S TPS and comparing with an organic/aqueous system. All investigated 1-butanol/ethanol/saturated ammonium sulfate solution/water (BEAsWat) and 1-butanol/ethanol/saturated dipotassium hydrogen phosphate solution/water (BEDhpWat) systems with polarity values of organic phase from 4.5 to 6.8, were more polar than chloroform/methanol/water (1/1/1). The considerable water content of BEAsWat and BEDhpWat (0/1/1/1/) was 45.4 and 42.6% (w%) of hydrophilic organic phase, and 66.4 and 51.2% (w%) of salt-containing aqueous phase, respectively, closed to conventional aqueous two-phase system. Therefore, the polarity of HO/S TPS is in the middle of organic/aqueous and aqueous two-phase system. The LogKC values of twenty four polar compounds as model mixture confirmed that the polarities of HO/S TPSs were matched to that of the polar compounds and shown to be a very selective technique capable of separating positional isomers. Moreover, BEAsWat and BEDhpWat systems can be easily retained in CCC column with suitable elution mode. The hydrodynamic behavior reversion of HO/S TPS on hydrodynamic CCC was observed and was tentatively explained based on the density difference. Finally, caffeoylquinic acid isomers and dihydroxybenzoic acid isomers were successfully separated with HO/S TPS on CCC, respectively. Those results demonstrate that HO/S TPS on CCC is a performant and stable way to separate polar compounds from natural products.

Optimization of pineapple pulp residue hydrolysis for lipid production by Rhodotorula glutinis TISTR5159 using as biodiesel feedstock.

The higher lipid productivity of Rhodotorula glutinis TISTR5159 was achieved by optimizing the pineapple pulp hydrolysis for releasing the high sugars content. The sequential simplex method operated by varied; solid-to-liquid ratio, sulfuric acid concentration, temperature, and hydrolysis time were successfully applied and the highest sugar content (83.2 g/L) evaluated at a solid-to-liquid ratio of 1:10.8, 3.2% sulfuric acid, 105 °C for 13.9 min. Moreover, the (NH4)2SO4 supplement enhanced the lipid productivity and gave the maximum yields of biomass and lipid of 15.2 g/L and 9.15 g/L (60.2%), respectively. The C16 and C18 fatty acids were found as main components included oleic acid (55.8%), palmitic acid (16.6%), linoleic acid (11.9%), and stearic acid (7.8%). These results present the possibility to convert the sugars in pineapple pulp hydrolysate to lipids. The fatty acid profile was also similar to vegetable oils. Thus, it could be used as potential feedstock for biodiesel production.

Extraction of Oil from Flaxseed (Linum usitatissimum L.) Using Enzyme-Assisted Three-Phase Partitioning.

In this study, enzyme-assisted three-phase partitioning (EATPP) was used to extract oil from flaxseed. The whole procedure is composed of two parts: the enzymolysis procedure in which the flaxseed was hydrolyzed using an enzyme solution (the influencing parameters such as the type and concentration of enzyme, temperature, and pH were optimized) and three-phase partitioning (TPP), which was conducted by adding salt and t-butanol to the crude flaxseed slurry, resulting in the extraction of flaxseed oil into alcohol-rich upper phase. The concentration of t-butanol, concentration of salt, and the temperature were optimized to maximize the extraction yield. Under optimized conditions of a 49.29 % t-butanol concentration, 30.43 % ammonium sulfate concentration, and 35 °C extraction temperature, a maximum extraction yield of 71.68 % was obtained. This simple and effective EATPP can be used to achieve high extraction yields and oil quality, and thus, it is potential for large-scale oil production.

Ultrasound-assisted three-phase partitioning of polyphenol oxidase from potato peel (Solanum tuberosum).

Conventional three phase partitioning (TPP) and ultrasound assisted three phase partitioning (UATPP) were optimized for achieving the maximum extraction and purification of polyphenol oxidase (PPO) from waste potato peels. Different process parameters such as ammonium sulfate (NH4)2SO4 concentration, crude extract to t-butanol ratio, time, temperature and pH were studied for conventional TPP. Except agitation speed, the similar parameters were also optimized for UATPP. Further additional parameters were also studied for UATPP viz. irradiation time at different frequencies, duty cycle and, rated power in order to obtain the maximum purification factor and recovery of PPO. The optimized conditions for conventional TPP were (NH4)2SO4 0-40% (w/v), extract to t-butanol ratio 1:1 (v/v), time 40 min and pH 7 at 30°C. These conditions provided 6.3 purification factor and 70% recovery of PPO from bottom phase. On the other hand, UATPP gives maximum purification fold of 19.7 with 98.3% recovery under optimized parameters which includes (NH4)2SO4 0-40% (w/v), crude extract to t-butanol ratio 1: 1 (v/v) pH 7, irradiation time 5 min with 25 kHz, duty cycle 40% and rated power 150W at 30°C. UATPP delivers higher purification factor and % recovery of PPO along with reduced operation time from 40 min to 5 min when compared with TPP. SDS PAGE showed partial purification of PPO enzyme with UATPP with molecular weight in the range of 26-36 kDa. Results reveal that UATPP would be an attractive option for the isolation and purification of PPO without need of multiple steps.

Soil pH determines microbial diversity and composition in the park grass experiment.

The Park Grass experiment (PGE) in the UK has been ongoing since 1856. Its purpose is to study the response of biological communities to the long-term treatments and associated changes in soil parameters, particularly soil pH. In this study, soil samples were collected across pH gradient (pH 3.6-7) and a range of fertilizers (nitrogen as ammonium sulfate, nitrogen as sodium nitrate, phosphorous) to evaluate the effects nutrients have on soil parameters and microbial community structure. Illumina 16S ribosomal RNA (rRNA) amplicon sequencing was used to determine the relative abundances and diversity of bacterial and archaeal taxa. Relationships between treatments, measured soil parameters, and microbial communities were evaluated. Clostridium, Bacteroides, Bradyrhizobium, Mycobacterium, Ruminococcus, Paenibacillus, and Rhodoplanes were the most abundant genera found at the PGE. The main soil parameter that determined microbial composition, diversity, and biomass in the PGE soil was pH. The most probable mechanism of the pH impact on microbial community may include mediation of nutrient availability in the soil. Addition of nitrogen to the PGE plots as ammonium sulfate decreases soil pH through increased nitrification, which causes buildup of soil carbon, and hence increases C/N ratio. Plant species richness and plant productivity did not reveal significant relationships with microbial diversity; however, plant species richness was positively correlated with soil microbial biomass. Plants responded to the nitrogen treatments with an increase in productivity and a decrease in the species richness.

Simultaneous quantification of eight bioactive secondary metabolites from Codonopsis ovata by validated high performance thin layer chromatography and their antioxidant profile.

Chemical investigation of Codonopsis ovata resulted in the isolation and identification of ß-sitosterol-3-O-glycoside, luteolin, apigenin, gentiacaulein, swertiaperenine, ß-sitosterol, taraxeryl-3-acetate, and 3ß-acetoxyoleanane-12-one. A rapid, precise, sensitive and validated HPTLC method for simultaneous quantification of these natural products (NPs) was developed on silica-gel 60F254 plate using ternary solvent system, n-hexane:ethyl acetate:formic acid (10.5:3.5:0.43, v/v/v). Markers were quantified after post chromatographic derivatization with cerric ammonium sulfate reagent. The method was validated for accuracy, precision, LOD, LOQ and all calibration curves showed a good linear relationship (r>0.9924) within test range. Precision was evaluated by intra- and inter-day tests with RSDs <2.59%, accuracy validation recovery 92.43-99.50% with RSDs <1.00%. Apigenin was found major component (natural abundance: 1.103%) and ß-sitosterol the least (0.0263%). The NPs displayed antioxidant activity with luteolin exhibiting maximum effect at 1µg/mL concentration (75.9% for DPPH and 43.7% for ABTS) and others at 10 and 25µg/mL, suggesting thereby their apparent potential use for the prevention of free radical induced diseases or as an additive element to food and pharmaceutical industry.

Purification of monoclonal antibodies by hydrophobic interaction chromatography under no-salt conditions.

Hydrophobic interaction chromatography (HIC) is commonly used as a polishing step in monoclonal antibody purification processes. HIC offers an orthogonal selectivity to ion exchange chromatography and can be an effective step for aggregate clearance and host cell protein reduction. HIC, however, suffers from the limitation of use of high concentrations of kosmotropic salts to achieve the desired separation. These salts often pose a disposal concern in manufacturing facilities and at times can cause precipitation of the product. Here, we report an unconventional way of operating HIC in the flowthrough (FT) mode with no kosmotropic salt in the mobile phase. A very hydrophobic resin is selected as the stationary phase and the pH of the mobile phase is modulated to achieve the required selectivity. Under the pH conditions tested (pH 6.0 and below), antibodies typically become positively charged, which has an effect on its polarity and overall surface hydrophobicity. Optimum pH conditions were chosen under which the antibody product of interest flowed through while impurities such as aggregates and host cell proteins bound to the column. This strategy was tested with a panel of antibodies with varying pI and surface hydrophobicity. Performance was comparable to that observed using conventional HIC conditions with high salt.

Optimization of the diffusive gradients in thin films (DGT) method for simultaneous assay of potassium and plant-available phosphorus in soils.

Potassium (K) and phosphorus (P) are two important macronutrients for crops, and are usually applied to soils as granular fertilizer before seeding. Therefore, accurate soil tests prior to planting to predict crop response to fertilizers are important in optimizing crop yields. Traditional methods used for testing both available K and P in soils, which are based on chemical extraction procedures, are to be soil-type dependent, and the predictive relationships across a broad range of soils are generally poor. The diffusive gradients in thin films (DGT) technique, based on diffusion theory, is extensively used to measure the diffusive supply of trace elements, metals and some nutrients in soils and water. When DGT is used to assess plant-available P in soils, a good relationship is found between crop response to P fertilizer and concentrations of P in soil measured by DGT, and therefore the DGT method provides a more precise recommendation of P fertilizer requirements. Adaptation of the DGT method to measure plant-available K in soils has already been attempted [1], but limitations were reported due to the non-uniform size of the resin gel, decreased K binding rate of the gel at long deployment times and a limited ability to measure a wide range of K concentrations. To eliminate these problems, a new resin gel has been developed by combining Amberlite and ferrihydrite. This mixed Amberlite and ferrihydrite (MAF) gel has improved properties in terms of handling and even distribution of Amberlite in the gel. The elution efficiencies of the MAF gel for K and P were 90% and 96%, respectively. The diffusion coefficient of K through the diffusive gel was 1.30 × 10(-5)cm(2)s(-1) at 22 ± 1°C and was stable through time. Since ferrihydrite is already used in DGT P testing, the ability of the MAF gel to assess available P simultaneously was also assessed. The MAF gel performed the same as the traditional ferrihydrite gel for available P assessment in a wide variety of agricultural soils. This means that the newly developed gel has the potential to measure K and plant-available P in soils simultaneously.

Separation of ovotransferrin from chicken egg white without using organic solvents.

Ovotransferrin is one of the major egg white proteins that have antimicrobial activity as well as iron binding capability. The objective of this study was to develop a simple and easy method to separate ovotransferrin without using organic solvents. Egg white was separated from yolk, added in a 1:1 ratio to distilled water (DW), and then homogenized. The ovomucin in the diluted egg white was removed by centrifugation, adjusting the pH to 4.5 to 5.0. The resulting supernatant was added to different ratios of ammonium sulfate and citric acid, and then centrifuged after holding overnight at 4°C. The precipitant, which contains ovotransferrin, was dissolved in DW, and ovotransferrin was precipitated using different ratios of ammonium sulfate and citric acid. The precipitant collected after centrifugation was dissolved with DW and subjected to ultrafiltration to remove salts and concentrate the solution. The purity of the ovotransferrin was determined using SDS-PAGE, the protein identified using Western blot, and the estimated yield calculated by weighing the ovotransferrin after freeze drying. Over 85% purity and over 83% yield were obtained from the combinations of 5.0% (wt/vol) ammonium sulfate and 2.5% (wt/vol) citric acid followed by 2.0% (wt/vol) ammonium sulfate and 1.5% (wt/vol) citric acid. Activity of the ovotransferrin showed similar activity with previously separated ovotransferrin. However, this method is simpler and more cost effective than the previous method. The isolated ovotransferrin can be used as is or after modifications for various applications such as antimicrobial treatments, anticancer treatments, and iron-supplementing agents for humans.

Colorimetric assay for T4 polynucleotide kinase activity based on the horseradish peroxidase-mimicking DNAzyme combined with λ exonuclease cleavage.

T4 polynucleotide kinase (PNK) plays a critical role in various cellular events. Here, we describe a novel colorimetric strategy for estimating the activity of PNK and screening its inhibitors taking advantage of the efficient cleavage of λ exonuclease and the horseradish peroxidase-mimicking DNAzyme (HRPzyme) signal amplification. A label-free hairpin DNA with the sequence of HRPzyme was utilized in the assay. The 5'-hydroxyl terminal of the hairpin DNA was firstly phosphorylated in the presence of PNK and then digested by λ exonuclease. As a result, the blocked 'HRPzyme' sequence of the hairpin DNA was released due to the removal of its completely complementary sequence. Using this strategy, the assay for PNK activity was successfully translated into the detection of HRPzyme. Because of the completely blocking and efficiently releasing of HRPzyme, the colorimetric method exhibited an excellent performance in PNK analysis with a low detection limit of 0.06 U mL(-1) and a wide detection range from 0.06 to 100 U mL(-1). Additionally, the effects of different inhibitors on PNK activity were also evaluated. The proposed strategy holds great potential in the development of high-throughput phosphorylation investigation as well as in the screening of the related drugs.