Research on major antitumor active components in Zi-Cao-Cheng-Qi decoction based on hollow fiber cell fishing with high performance liquid chromatography.

Hollow fiber cell fishing (HFCF) based on hepatoma HepG-2 cells, human renal tubular ACHN cells or human cervical carcinoma HeLa cells, coupled with high-performance liquid chromatography (HPLC), was developed and employed to research the major active components in Zi-Cao-Cheng-Qi decoction both in vitro and in vivo. The research showed that the active components, such as hesperidin, magnolol, honokiol, shikonin, emodin and ß,ß'-dimethylacrylshikonin were screened out by HFCF based on the cancer cells in vitro, furthermore they can be absorbed into blood and reach in the target organ, and some of the active components can be fished by the cells and maintain effective concentrations. Before application of HFCF with HPLC, cell growth state, cell survival rate, positive effect on screening results binding between active centers on the fiber and target components, repeatability of retention times and relative peak areas of the target analytes were analysed and investigated. In short, HFCF with HPLC is a simple, inexpensive, effective, and reliable method that can be used in researching active components from traditional Chinese medicine (TCM) and its formula both in vitro and in vivo, elucidating preliminarily the TCM characteristics of multiple components and multiple targets, laying a foundation for expounding the antitumor efficacy material basis in TCM.

Optimization of ferric chloride concentration and pH to improve both cell growth and flocculation in Chlorella vulgaris cultures. Application to medium reuse in an integrated continuous culture bioprocess.

Combined effect of ferric chloride and pH on Chlorella vulgaris growth and flocculation were optimized using DoE. Afterwards, an integrated bioprocess for microalgae cultivation and harvesting conceived as a sole step was run in continuous operation mode. Microalgae concentration in a 2L-photobioreactor was about 0.5gL(-1) and the efficiency of flocculation in the coupled sedimentation tank was about 95%. Dewatered microalgae reached a biomass concentrations increase about 50-fold, whereas it was only about 0.02gL(-1) in the clarified medium. Then, the reuse of the clarified medium recovered was further evaluated. The clarified medium was reused without any further nutrient supplementation, whereas a second round of medium reuse was performed after supplementation of main nutrients (phosphate-sulfate-nitrate), micronutrients and ferric chloride. The medium reuse strategy did not affect cell growth and flocculation. Consequently, the reuse of medium reduces the nutrients requirements and the demand for water, and therefore the production costs should be reduced accordingly.

Cost-effective differentiation of hepatocyte-like cells from human pluripotent stem cells using small molecules.

Significant efforts have been invested into the differentiation of stem cells into functional hepatocyte-like cells that can be used for cell therapy, disease modeling and drug screening. Most of these efforts have been concentrated on the use of growth factors to recapitulate developmental signals under in vitro conditions. Using small molecules instead of growth factors would provide an attractive alternative since small molecules are cell-permeable and cheaper than growth factors. We have developed a protocol for the differentiation of human embryonic stem cells into hepatocyte-like cells using a predominantly small molecule-based approach (SM-Hep). This 3 step differentiation strategy involves the use of optimized concentrations of LY294002 and bromo-indirubin-3'-oxime (BIO) for the generation of definitive endoderm; sodium butyrate and dimethyl sulfoxide (DMSO) for the generation of hepatoblasts and SB431542 for differentiation into hepatocyte-like cells. Activin A is the only growth factor required in this protocol. Our results showed that SM-Hep were morphologically and functionally similar or better compared to the hepatocytes derived from the growth-factor induced differentiation (GF-Hep) in terms of expression of hepatic markers, urea and albumin production and cytochrome P450 (CYP1A2 and CYP3A4) activities. Cell viability assays following treatment with paradigm hepatotoxicants Acetaminophen, Chlorpromazine, Diclofenac, Digoxin, Quinidine and Troglitazone showed that their sensitivity to these drugs was similar to human primary hepatocytes (PHHs). Using SM-Hep would result in 67% and 81% cost reduction compared to GF-Hep and PHHs respectively. Therefore, SM-Hep can serve as a robust and cost effective replacement for PHHs for drug screening and development.

A low-cost culture medium for the production of Nannochloropsis gaditana biomass optimized for aquaculture.

Nannochloropsis gaditana is a microalga with a high nutritional value and a protein and polyunsaturated fatty acid (PUFA) content that makes it interesting as a feed in aquaculture. To maximize its productivity and nutritional value in large-scale culture, a well-known commercial medium was optimized to the most favorable nutrient level using commercial fertilizers. Optimal growth conditions were obtained in the alternative fertilizer-based medium at a nitrogen concentration of 11.3 mM, a phosphorus concentration of 0.16 mM, and a micronutrient concentration of 30 µL L(-1). This alternative medium allowed to obtain a biomass concentration similar to that achieved when using the commercial formula but with a reduction in Cu, Fe, and Mo content of 71%, 89%, and 99%, respectively. A maximum biomass productivity of 0.51 g L(-1) d(-1) was obtained. The eicosapentaenoic acid and protein contents of the biomass were 2.84% and 44% of dry weight, respectively.

Hot embossing for fabrication of a microfluidic 3D cell culture platform.

Clinically relevant studies of cell function in vitro require a physiologically-representative microenvironment possessing aspects such as a 3D extracellular matrix (ECM) and controlled biochemical and biophysical parameters. A polydimethylsiloxane (PDMS) microfluidic system with a 3D collagen gel has previously served for analysis of factors inducing different responses of cells in a 3D microenvironment under controlled biochemical and biophysical parameters. In the present study, applying the known commercially-viable manufacturing methods to a cyclic olefin copolymer (COC) material resulted in a microfluidic device with enhanced 3D gel capabilities, controlled surface properties, and improved potential to serve high-volume applications. Hot embossing and roller lamination molded and sealed the microfluidic device. A combination of oxygen plasma and thermal treatments enhanced the sealing, ensured proper placement of the 3D gel, and created controlled and stable surface properties within the device. Culture of cells in the new device indicated no adverse effects of the COC material or processing as compared to previous PDMS devices. The results demonstrate a methodology to transition microfluidic devices for 3D cell culture from scientific research to high-volume applications with broad clinical impact.

Chemical target and pathway toxicity mechanisms defined in primary human cell systems.

INTRODUCTION: The ability to predict the health effects resulting from drug or chemical exposure has been challenging due to the complexity of human biology. Approaches that detect and discriminate a broad range of mechanisms in testing formats that are predictive and yet cost-effective are needed. METHODS: Here, we evaluated the performance of BioMAP systems, primary human cell-based disease models, as a platform for characterization of chemical toxicity mechanisms. For this we tested a set of compounds with known or well-studied mechanisms in a panel of 8 BioMAP assays relevant to human respiratory, skin, immune and vascular exposure sites. RESULTS: We evaluated the ability to detect and distinguish compounds based on mechanisms of action, comparing the BioMAP activity profiles generated in a reduced sample number format to reference database profiles derived from multiple experiments. We also studied the role of BioMAP assay panel size and concentration effects, both of which were found to contribute to the ability to discriminate chemicals and mechanisms. DISCUSSION: Compounds with diverse mechanisms, including modulators of the NFkappaB pathway, microtubule function and mitochondrial activity, could be discriminated and classified into target and pathway mechanisms in both assay formats. Certain inhibitors of mitochondrial function, such as rotenone and sodium azide, but not others, were classified with inducers of endoplasmic reticulum stress, providing insight into the toxicity mechanisms of these agents. This method may have utility in classifying novel agents with unknown modes of action according to their effects on toxicity pathways.

Production of Gluconobacter oxydans cells from low-cost culture medium for conversion of glycerol to dihydroxyacetone.

Gluconobacter oxydans could be immobilized as a biocatalyst for the conversion of glycerol to dihydroxyacetone. To reduce the production cost, the cells were produced from agricultural byproducts. Corn meal hydrolysate and corn steep liquor were employed to replace of sorbitol and yeast extract as medium for G. oxydans cell production. The optimal medium contained 80 g/L reducing sugar, 25 g/L corn steep liquor, and 10 g/L glycerol. The cell mass was about 4.22 g/L and the glycerol dehydrogenase activity was about 5.23 U/mL. For comparison, the cell mass was about 4.0 g/L and the glycerol dehydrogenase activity was about 5.35 U/mL cultured in sorbitol and yeast extract medium. These studies shown the corn meal hydrolysate and corn steep liquor medium was similar in performance to a nutrient-rich medium, but the cost of production was only 15% of that cultured in sorbitol and yeast extract medium. It was an economical process for the production of G. oxydans cells as biocatalyst for the conversion of glycerol to dihydroxyacetone in industry.