Constructing network structures to enhance stability and target deposition of selenium nanoparticles via amphiphilic sodium alginate and alkyl glycosides.

Dietary selenium (Se) supplementation has recently received increasing attention; however, Selenium nanoparticles (SeNPs) exhibit poor stability and tend to aggregate in aqueous solution. Therefore, enhancing the stability of SeNPs and their effective delivery to plants remain challenging. In this study, sodium alginate (SA) and lysozyme (LZ) were reacted via the wet-heat Maillard reaction (MR) to obtain amphiphilic alginate-based polymers (SA-LZ). Alkyl glycosides (APG) were introduced into SA-LZ to enhance the deposition of SeNPs in leaves. Thus, a renewable and degradable polysaccharide-based material (SA-LZ/APG) loaded with Se formed an amphiphilic alginate-based-based shell with a Se core. Notably, the encapsulation of SeNPs into a polysaccharide base (SA-LZ/APG) increased the stabilization of SeNPs and resulted in orange-red, zero-valent, monoclinic and spherical SeNPs with a mean diameter of approximately 43.0 nm. In addition, SA-LZ/APG-SeNPs reduced the interfacial tension of plant leaves and increased the Se content of plants compared to the blank group. In vitro studies have reported that SA-LZ/APG-SeNPs and SA-LZ-SeNPs have significantly better clearance of DDPH and ABTS than that of APG-SeNPs. Thus, we believe that SA-LZ/APG is a promising smart delivery system that can synergistically enhance the stability of SeNPs in aqueous solutions and improve the bioavailability of Se nutrient solutions.

Biosurfactants production by marine yeasts isolated from zoanthids and characterization of an emulsifier produced by Yarrowia lipolytica LMS 24B.

The present study investigates the potential for biosurfactant production of 19 marine yeast species obtained from zoanthids. Using the emulsification index test to screen the samples produced by the marine yeasts, we verified that five isolates exhibited an emulsification index ≥50%. Additional tests were performed on such isolates, including oil displacement, drop collapse, Parafilm M assay, and surface tension measurement. The tolerance of produced biosurfactants for environmental conditions was also analyzed, especially considering the media's temperature, pH, and salinity. Moreover, the surfactant's ability to emulsify different hydrocarbon sources and to metabolize kerosene as the sole carbon source was evaluated in vitro. Our results demonstrate that yeast biosurfactants can emulsify hydrocarbon sources under different physicochemical conditions and metabolize kerosene as a carbon source. Considering the Yarrowia lipolytica LMS 24B as the yeast model for biosurfactant production from the cell's wall biomass, emulsification indexes of 61.2% were obtained, even at a high temperature of 120 °C. Furthermore, the Fourier-transform middle infrared spectroscopy (FTIR) analysis of the biosurfactant's chemical composition revealed the presence of distinct functional groups assigned to a glycoprotein complex. Considering the status of developing new bioproducts and bioprocesses nowadays, our findings bring a new perspective to biosurfactant production by marine yeasts, especially Y. lipolytica LMS 24B. In particular, the presented results validate the relevance of marine environments as valuable sources of genetic resources, i.e., yeast strains capable of metabolizing and emulsifying petroleum derivatives.

Performance evaluation of rhamnolipid biosurfactant produced by Pseudomonas aeruginosa and its effect on marine oil-spill remediation.

This study aimed to reveal that the effect of biosurfactant on the dispersion and degradation of crude oil. Whole genome analysis showed that Pseudomonas aeruginosa GB-3 contained abundant genes involved in biosurfactant synthesis and metabolic processes and had the potential to degrade oil. The biosurfactant produced by strain GB-3 was screened by various methods. The results showed that the surface tension reduction activity was 28.6 mN·m-1 and emulsification stability was exhibited at different pH, salinity and temperature. The biosurfactant was identified as rhamnolipid by LC-MS and FTIR. The fermentation conditions of strain GB-3 were optimized by response surface methodology, finally the optimal system (carbon source: glucose, nitrogen source: ammonium sulfate, C/N ratio:16:1, pH: 7, temperature: 30-35 °C) was determined. Compared with the initial fermentation, the yield of biosurfactant increased by 4.4 times after optimization. In addition, rhamnolipid biosurfactant as a dispersant could make the dispersion of crude oil reach 38% within seven days, which enhanced the bioavailability of crude oil. As a biostimulant, it could also improve the activity of indigenous microorganism and increase the degradation rate of crude oil by 10-15%. This study suggested that rhamnolipid biosurfactant had application prospect in bioremediation of marine oil-spill.

An outlook on the versatility of plant saponins: A review.

The abundance of saponin-rich plants across different ecosystems indicates their great potential as a replacement for harmful synthetic surfactants in modern commercial products. These organic saponins have remarkable biological and surface-active properties and align with sustainable and eco-friendly practices. This article examines and discusses the structure and properties of plant saponins with high yield of saponin concentrations and their exploitable applications. This highlights the potential of saponins as ethical substitutes for traditional synthetic surfactants and pharmacological agents, with favorable effects on the economy and environment. For this purpose, studies on the relevant capabilities, structure, and yield of selected plants were thoroughly examined. Studies on the possible uses of the selected saponins have also been conducted. This in-depth analysis highlights the potential of saponins as workable and ethical replacements for traditional synthetic medications and surfactants, thus emphasizing their favorable effects on human health and the environment.

Screening biosurfactant-producing actinomycetes: Identification of Streptomyces sp. RP1 as a potent species for bioremediation.

This study aimed to isolate biosurfactant-producing and hydrocarbon-degrading actinomycetes from different soils using glycerol-asparagine and starch-casein media with an antifungal agent. The glycerol-asparagine agar exhibited the highest number of actinomycetes, with a white, low-opacity medium supporting pigment production and high growth. Biosurfactant analyses, such as drop collapse, oil displacement, emulsification, tributyrin agar test, and surface tension measurement, were conducted. Out of 25 positive isolates, seven could utilize both olive oil and black oil for biosurfactant production, and only isolate RP1 could produce biosurfactant when grown in constrained conditions with black oil as the sole carbon source and inducer, demonstrating in situ bioremediation potential. Isolate RP1 from oil-spilled garden soil is Gram-staining-positive with a distinct earthy odor, melanin formation, and white filamentous colonies. It has a molecular size of ~621 bp and 100% sequence similarity to many Streptomyces spp. Morphological, biochemical, and 16 S rRNA analysis confirmed it as Streptomyces sp. RP1, showing positive results in all screenings, including high emulsification activity against kerosene (27.2%) and engine oil (95.8%), oil displacement efficiency against crude oil (7.45 cm), and a significant reduction in surface tension (56.7 dynes/cm). Streptomyces sp. RP1 can utilize citrate as a carbon source, tolerate sodium chloride, resist lysozyme, degrade petroleum hydrocarbons, and produce biosurfactant at 37°C in a 15 mL medium culture, indicating great potential for bioremediation and various downstream industrial applications with optimization.

Effect of cationic surfactant on the physicochemical and antibacterial properties of colloidal systems (emulsions and microemulsions).

Colloidal systems have been used to encapsulate, protect and release essential oils in mouthwashes. In this study, we investigated the effect of cetylpyridinium chloride (CPC) on the physicochemical properties and antimicrobial activity of oil-in-water colloidal systems containing tea tree oil (TTO) and the nonionic surfactant polysorbate 80. Our main aim was to evaluate whether CPC could improve the antimicrobial activity of TTO, since this activity is impaired when this essential oil is encapsulated with polysorbate 80. These systems were prepared with different amounts of TTO (0-0.5% w/w) and CPC (0-0.5% w/w), at a final concentration of 2% (w/w) polysorbate 80. Dynamic light scattering (DLS) results revealed the formation of oil-swollen micelles and oil droplets as a function of TTO concentration. Increases in CPC concentrations led to a reduction of around 88% in the mean diameter of oil-swollen micelles. Although this variation was of only 20% for the oil droplets, the samples appearance changed from turbid to transparent. The surface charge of colloidal structures was also markedly affected by the CPC as demonstrated by the transition in zeta potential from slightly negative to highly positive values. Electron paramagnetic resonance (EPR) studies showed that this transition is followed by significant increases in the fluidity of surfactant monolayer of both colloidal structures. The antimicrobial activity of colloidal systems was tested against a Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureaus) bacteria. Our results revealed that the inhibition of bacterial growth is observed for the same CPC concentration (0.05% w/w for E. coli and 0.3% w/w for S. aureus) regardless of TTO content. These findings suggest that TTO may not act as an active ingredient in polysorbate 80 containing mouthwashes.

Two-dimensional correlation infrared spectroscopy elucidated the volatilization process of the microemulsion composed of peppermint essential oil and composite herbal extract.

Microemulsion is usually a transparent and isotropic liquid mixture composed of oil phase, water phase, surfactant and cosurfactant. The surfactant-framed nanoscale droplets in the microemulsion can penetrate into the skin surface to reduce its barrier function. This makes microemulsion an ideal preparation for the transdermal drug delivery. The permeability of microemulsion may be further enhanced when botanical essential oils that can dissolve the stratum corneum are used as the oil phase. However, the volatility of essential oils is possible to shorten the retention time of the microemulsion on the skin surface. Therefore, analytical methods are required to understand the volatilization process of the microemulsion composed of essential oils to develop the reasonable topical drug carrier system. In this research, Fourier transform infrared (FTIR) spectroscopy with an attenuated total reflection (ATR) accessory cooperated with two-dimensional correlation spectroscopy (2DCOS) to elucidate the volatilization processes of some microemulsions composed of peppermint essential oil. Principal component analysis (PCA) and moving-window two-dimensional correlation spectroscopy (MW2DCOS) revealed the multiple stages of the volatilization processes of the microemulsions. Synchronous 2D correlation infrared spectra indicated the compositional changes during each stage. It was found that the successive volatilizations of ethanol, water and menthone were the major events during the volatilization process of the microemulsion composed of peppermint essential oil. Ethanol can accelerate the volatilization of water, while the composite herbal extract seemed to not influence the volatilization of the other ingredients. After a 20-min-long volatilization process, the remaining microemulsion still contained considerable peppermint essential oil to affect the skin. The above results showed the feasibility of developing the microemulsion composed of peppermint essential oil for the transdermal drug delivery of composite herbal extract. This research also proved that the combination of ATR-FTIR spectroscopy and 2DCOS was valuable to study the volatilization process of the microemulsion.

Multifunctional Deep Eutectic Solvent-Based Microemulsion for Transdermal Delivery of Artemisinin.

As a serious public health issue, malaria threatens the health of millions of people. Artemisinin, a gift from traditional Chinese medicine, has been used in the treatment of malaria and has shown good therapeutic efficiency. However, due to its low solubility, poor bioavailability, and short half-life time, some smart delivery strategies are still required. Herein, a multifunctional DES prepared from ibuprofen and menthol was prepared. This DES was shown to efficiently promote the solubility of artemisinin up to 400-fold. Then, it was further applied as the oil phase to construct an O/W microemulsion with the help of Tween-80 + Span-20 mixed surfactants. The prepared microemulsion displayed high efficiency in improving the permeability of artemisinin, which can be ascribed to the presence of the permeation enhancer menthol in DES and the microstructure of the O/W microemulsion. Moreover, the simultaneous permeation of artemisinin and ibuprofen further indicated the potential benefits of the presented formulation in the treatment of malaria. To sum up, the microemulsion based on multifunctional DES presented herein provided an effective method for transdermal delivery of artemisinin.

Biosurfactant and biopolymer producing microorganisms from West Kazakhstan oilfield.

Microbiological enhanced oil recovery (MEOR) uses indigenous or exogenous microorganisms and nutrients to enhance oil production through synthesis of metabolites reducing oil viscosity and surface tension. In order to find bacteria suitable for MEOR, we studied 26 isolates from wells in the Akingen oilfield in West Kazakhstan. Six of them were selected for further analysis based on their ability to reduce surface tension to less than 40 mN/m, with the A9 isolate exhibiting tension reduction values of 32.76 ± 0.3 mN/m. Based on the morphological features, biochemical activities, and the 16S rRNA gene, the isolates were classified to the Bacillus subtilis group. In the phylogenetic analysis the isolates grouped into two main clusters. Genes encoding the surfactin synthetase subunits were found in A2, A8, A9, A12, PW2, only the PW2 strain had lchAA encoding lichenysin, while sacB encoding levan was noted in A2, A8, A9, and A12. The expression of srfAB, srfAC, and sacB tested with qPCR varied among strains. Nevertheless, whereas temperature moderately affects the expression level, with the highest level recorded at 40 °C, salinity significantly impacts the expression of the genes encoding biosurfactants. B. subtilis strains isolated in the study, especially A9, are promising for microbial-enhanced oil recovery.

Formulation and in vitro characterization of nanoemulsions containing remdesivir or licorice extract: A potential subcutaneous injection for coronavirus treatment.

The management of coronavirus necessitates that medicines are available, reasonably priced, and easy to administer. The work aimed at formulating and characterizing remdesivir and licorice extract nanoemulsions and comparing their efficacy against coronavirus for further subcutaneous injection. First, the solubility of remdesivir was determined in different oils, surfactants, and co-surfactants to choose the optimal nanoemulsion components. Nanoemulsions were optimized concerning surfactant: co-surfactant ratio (5:1, 4:1, 3:1, 2:1, and 1:1) and oil to surfactant: co-surfactant ratio (1:9, 1:8, 1:7, 1:6, 1:5, 1:4, 1:3, 1:2, and 1:1). The formulations were evaluated concerning % transmittance, emulsification time, pH, viscosity, droplet size, polydispersity index, zeta potential, drug content, transmission electron microscopy, in-vitro drug release, stability (of the optimal formulas), and antiviral effect against coronavirus. The optimal nanoemulsion formula was F7, exhibiting an acceptable pH level, a rapid emulsification rate, a viscosity of 20 cP, and 100% drug content. The formulation droplet size was 16 and 17 nm, the polydispersity index was 0.18 and 0.26, and the zeta potential was - 6.29 and - 10.34 mV for licorice extract and remdesivir nanoemulsions, respectively. However, licorice extract nanoemulsion exhibited better release and physical stability. Licorice extract nanoemulsion may be a potential subcutaneous injection for combating mild to moderate coronavirus.

Molecular dynamics study on the interaction of phosphorus building gypsum /surfactant composites.

While surfactants are widely used in phosphogypsum, their interactions with the phosphogypsum-water interface remain unclear. This study investigates the impact of three types of surfactants, namely polycarboxylate-based surfactant (PCE-TPEG), naphthalene-based surfactant (NS), and melamine-based surfactant (MS), on the performance of phosphorus building gypsum (PBG). Additionally, a nanoscale model of the PBG-surfactant-water interface is constructed using molecular dynamics to elucidate the mechanisms underlying the interaction between different surfactants and PBG at multiple scales. The results demonstrate that all surfactants enhance the mechanical properties of PBG. PCE-TPEG exhibits the most pronounced improvement. In the model, PCE-TPEG molecules likely undergo comb-like adsorption, while NS and MS molecules tend to adsorb on both ends of the crystal plane. Changes in the potential difference between CaSO4·2H2O and H2O, as well as between CaSO4·2H2O and the surfactant, play a crucial role in adsorption. PCE-TPEG, NS, and MS molecules tend to spread horizontally in a vacuum state. With the addition of water molecules, they transition to spatial adsorption. Ca2+ easily interacts with -COO- and -SO3- groups, leading to reduced migration and flexibility of the main chain. The adsorption process of surfactants at the gypsum-water interface occurs spontaneously and Electrostatic forces are the main driving factor. This study contributes to a more comprehensive understanding on the behaviour of the phosphorus building gypsum/surfactant composites.

[Preparation and quality evaluation of total flavonoids microemulsion of "Pueraria lobata-Hovenia dulcis"].

The effective components of flavonoids in the "Pueraria lobata-Hovenia dulcis" drug pair have low bioavailability in vivo due to their unstable characteristics. This study used microemulsions with amphoteric carrier properties to solve this problem. The study drew pseudo-ternary phase diagrams through titration compatibility experiments of the oil phase with emulsifiers and co-emulsifiers and screened the prescription composition of blank microemulsions. The study used average particle size and PDI as evaluation indicators, and the central composite design-response surface method(CCD-RSM) was used to optimize the prescription; high-dosage drug-loaded microemulsions were obtained, and their physicochemical properties, appearance, and stability were evaluated. The results showed that when ethyl butyrate was used as the oil phase, polysorbate 80(tween 80) as the surfactant, and anhydrous ethanol as the cosurfactant, the maximum microemulsion area was obtained. When the difference in results was small, K_(m )of 1∶4 was chosen to ensure the safety of the prescription. The prescription composition optimized by the CCD-RSM was ethyl butyrate(16.28%), tween 80(9.59%), and anhydrous ethanol(38.34%). When the dosage reached 3% of the system mass, the total flavonoid microemulsion prepared had a clear and transparent appearance, with average particle size, PDI, and potential of(74.25±1.58)nm, 0.277±0.043, and(-0.08±0.07) mV, respectively. The microemulsion was spherical and evenly distributed under transmission electron microscopy. The centrifugal stability and temperature stability were good, and there was no layering or demulsification phenomenon, which significantly improved the in vitro dissolution of total flavonoids.

[Establishment of a quantitative method for GC analysis of polyoxyethylene (35) castor oil in microemulsion extracts].

With the continuous exploration of microemulsions as solvents for traditional Chinese medicine extraction, polyoxyethy-lene(35) castor oil(CrEL), a commonly used surfactant, is being utilized by researchers. However, the problem of detecting residues of this surfactant in microemulsion extracts has greatly hampered the further development of microemulsion solvents. Based on the chemical structures of the components in CrEL and the content determination method of castor oil in the 2020 edition of the Chinese Pharmacopoeia(Vol. Ⅳ), this study employed gas chromatography(GC) and single-factor experiments to optimize the preparation method of methyl ricinoleate from CrEL. The conversion coefficient between the two was validated, and the optimal sample preparation method was used to process microemulsion extracts of Zexie Decoction from three batches. The content of methyl ricinoleate generated was determined, and the content of CrEL in the microemulsion extracts of Zexie Decoction was calculated using the above conversion coefficient. The results showed that the optimal preparation method for CrEL was determined. Specifically, 10 mL of 1 mol·L~(-1) KOH-methanol solution was heated at 60 ℃ for 15 min in a water bath. Subsequently, 10 mL of boron trifluoride etherate-methanol(1∶3) solution was heated at 60 ℃ for 15 min in a water bath, followed by extraction with n-hexane twice. CrEL could stably produce 20.84% methyl ricinoleate. According to this conversion coefficient, the average mass concentration of CrEL in the three batches of Zexie Decoction microemulsion extracts was 11.94 mg·mL~(-1), which was not significantly different from the CrEL mass concentration of 11.57 mg·mL~(-1) during microemulsion formulation, indicating that the established content determination method of this study was highly accurate, sensitive, and repeatable. It can be used for subsequent research on microemulsion extracts of Zexie Decoction and provide a reference for quality control of other drug formulations containing CrEL.

Development and stability of intimate soap formulations using Sapindus saponaria L. extract as a natural surfactant.

The use of synthetic surfactants reflects the high demand in the hygiene and cleaning sector for products with low-cost and good-effectiveness. These ingredients are the main components of intimate soap formulations. Sapindus saponaria L. is a plant rich in saponins, with the potential to be used as a natural surfactant due to its amphiphilic character and its foam-forming properties. Therefore, this study aimed to develop intimate soap formulations using S. saponaria extract as a natural surfactant and analyze its stability and surfactant characteristics. Preliminary and accelerated stability parameters, rheological characteristics, surface tension, foaming power, foam stability and emulsification potential were evaluated. The formulations were stable at a pH suitable for the intimate region (4.0 to 4.5), the presence of S. saponaria extract provided greater reduction of surface tension, better foaming and foam stability and greater emulsification power, desirable characteristics for an intimate liquid soap. These results demonstrate that the incorporation of S. saponaria extract into liquid soap formulations is an excellent option as a natural surfactant to reduce the use of synthetic anionic surfactants such as SLES.

Counterion optimization for hydrophobic ion pairing (HIP): Unraveling the key factors.

In the present study, various surfactants were combined with insulin (INS), bovine serum albumin (BSA) and horseradish peroxidase (HRP) via hydrophobic ion pairing to increase lipophilicity and facilitate incorporation into self-emulsifying drug delivery systems (SEDDS). Lipophilicity of model proteins was successfully increased, achieving log Dn-butanol/water values up to 3.5 (INS), 3.2 (BSA) and 1.2 (HRP). Hereby, key factors responsible for complex formation were identified. In particular, surfactants with branched alkyl chains or chain lengths greater than C12 showed favorable properties for hydrophobic ion pairs (HIP). Furthermore, flexibility of the carbon chain resulted in higher lipophilicity and suitability of polar head groups of surfactants for HIP decreased in the rank order sulfonate > sulfosuccinate > phosphate = sulfate > carbonate > phosphonic acids = sulfobetaines. Stability studies of formed HIP complexes were performed in various gastrointestinal fluids and their solubility was determined in commonly used SEDDS excipients. Formed complexes were stable in simulated gastrointestinal fluids and could be incorporated into SEDDS formulations (C1: 10% caprylocaproyl polyoxyl-8 glycerides, 20% PEG-40 hydrogenated castor oil, 20% medium-chain triglycerides, 50% n-butanol; C2: 10% caprylocaproyl polyoxyl-8 glycerides, 20% PEG-40 hydrogenated castor oil, 20% medium-chain triglycerides, 40% n-butanol, 10% 1,2-butanediol), resulting in suitable payloads of up to 11.9 mg/ml for INS, 1.0 mg/ml for BSA and 1.6 mg/ml for HRP.

Impact of biosurfactant produced by Bacillus spp. on biodegradation efficiency of crude oil and anthracene.

Biosurfactants are surface active molecules generated by various microorganisms, including bacteria, actinobacteria, algae, and fungi. In this study, bacterial strains are isolated from soil contaminated with used motor oil and examined for potential biosurfactant production. A minimum salt medium (MSM), with crude oil as the only carbon source, is used to isolate potential biosurfactant-producing bacterial strains. About 23 strains are isolated, and all are subjected to the primary screening methods for biosurfactant production. Based on the emulsification index, oil displacement, and drop collapse screening methods, two isolates with potential biosurfactant-producing ability are selected for further studies. The synthesis of biosurfactants, crude oil and anthracene biodegradation is carried out with strains DTS1 and DTS2. Both strains show significant outcomes in crude oil degradation. In addition, both strains can utilize anthracene as the sole carbon source. During the degradation course, changes in the growth conditions are continuously monitored by measuring turbidity and pH. In this degradation study, the biosurfactant production aptitude of the isolated strains plays an essential role in increasing the bioavailability of hydrophobic hydrocarbons. These strains are identified down to the molecular level by employing 16S rRNA gene sequencing, and the acquired sequences are submitted to get the accession numbers. These prospective strains can be utilized to remediate hydrocarbon-contaminated environments.

Aggregation, toxicity, and biodegradability study of an ionic liquid-based formulation for effective oil spill remediation.

Chemical dispersants are extensively used for marine oil spill remediation. However, the increased toxicity and low biodegradability of these dispersants restrict their employment in the marine environment. Hence, in this work, we have developed an eco-friendly formulation composed of an ionic liquid,1-butyl-3-methylimidazolium lauroyl sarcosinate [BMIM][Lausar] and sorbitan monooleate (Span) 80. Micellar and interfacial parameters, dispersion effectiveness, as well as the toxicity and biodegradability of the developed formulation were investigated. Micellar properties confirmed a high degree of synergism among the surfactant molecules and the formation of stable micelle. The dispersion effectiveness, at dispersant-to-oil ratio (DOR) of 1:25 (v/v), against three crude oils (Arab, Ratawi, and Doba) was assessed. We achieved a dispersion effectiveness of 68.49%, 74.05%, and 83.43% for Ratawi, Doba, and Arab crude oil, respectively, using a 70:30 (w/w) ratio of Span 80 to [BMIM][Lausar]. Furthermore, the results obtained from optical microscopy and particle size analysis (PSA) indicated that the oil droplet size decreased with higher DOR. Additionally, acute toxicity experiments were conducted on zebrafish (Danio rerio) using the developed formulation, confirming its non-toxic behavior, with LC50 values of 800 mg/L after 96 h. The formulation also exhibited high biodegradability, with only 25.01% of the original quantity remaining after 28 days. Hence, these results suggest that the new formulation has the potential to be a highly effective and environmentally friendly dispersant for oil spill remediation.

Efficient remediation of soils contaminated with petroleum hydrocarbons using sustainable plant-derived surfactants.

Surfactant-enhanced multiphase extraction is recognized as an effective method to remove petroleum related contaminants from soil. Owing to the high biodegradability and low biotoxicity, plant-derived surfactants are considered as promising alternatives to synthetic surfactants. In this study, two plant surfactants were respectively extracted from Sapindus mukorossi (PS-1) and Fructus Gleditsiae sinensis (PS-2). Component analysis and chemical structure characterization indicated that triterpenoid saponins were the main components of both plant surfactants. The removal efficiency of tetradecane by PS-1 and PS-2 was 75.6% and 62.2%, respectively, which was comparable with that by Tween-80. The results were validated by column leaching experiments. The abundant hydroxyl, aldehyde and epoxy groups in the plant surfactants made them readily self-assemble to form micelles via hydrogen bonding and van der Waals interactions, which promoted the solubilization of tetradecane in the liquid phase, particularly at appropriate ionic strength and temperature. Due to the reduced electrostatic attraction by the acidic and ionizable functional groups in the plant surfactants, their sorption capacities (0.15 and 0.24 g1-n Ln·kg-1 for PS-1 and PS-2, respectively) onto the soil were much lower than that of Tween-80, making them much easier to be extracted from contaminated soil. This study would deepen our understanding to improve the performances of plant surfactants in petroleum hydrocarbons-contaminated soil remediation.

Characterization of pumilacidin, a lipopeptide biosurfactant produced from Bacillus pumilus NITDID1 and its prospect in bioremediation of hazardous pollutants.

Highly hydrophobic compounds like petroleum and their byproducts, once released into the environment, can persist indefinitely by virtue of their ability to resist microbial degradation, ultimately paving the path to severe environmental pollution. Likewise, the accumulation of toxic heavy metals like lead, cadmium, chromium, etc., in the surroundings poses an alarming threat to various living organisms. To remediate the matter in question, the applicability of a biosurfactant produced from the mangrove bacterium Bacillus pumilus NITDID1 (Accession No. KY678446.1) is reported here. The structural characterization of the produced biosurfactant revealed it to be a lipopeptide and has been identified as pumilacidin through FTIR, NMR, and MALDI-TOF MS. The critical micelle concentration of pumilacidin was 120 mg/L, and it showed a wide range of stability in surface tension reduction experiments under various environmental conditions and exhibited a high emulsification index of as much as 90%. In a simulated setup of engine oil-contaminated sand, considerable oil recovery (39.78%) by this biosurfactant was observed, and upon being added to a microbial consortium, there was an appreciable enhancement in the degradation of the used engine oil. As far as the heavy metal removal potential of biosurfactant is concerned, as much as 100% and 82% removal was observed for lead and cadmium, respectively. Thus, in a nutshell, the pumilacidin produced from Bacillus pumilus NITDID1 holds promise for multifaceted applications in the field of environmental remediation.

Corn Oil-Water Separation: Interfacial Behavior of Extended Surfactant and Glutelin.

The purification and collection of various products from oil/water mixtures are routine procedures. However, the presence of emulsifiers that can displace other surface active components in the mixtures can significantly influence the efficiency of such procedures. Previously, we investigated interfacial mechanisms of zein protein-induced emulsification and the opposing surfactant-induced demulsification related to corn oil refinement. In this paper, we further investigated a different class of protein, glutelin, inside corn and proved that glutelin acts as an oil/water emulsifier in an acidic water environment. Furthermore, an extended surfactant's protein disordering and removal ability was tested and compared with a conventional surfactant. An extended surfactant contains a poly(propylene oxide) or poly(propylene oxide)-poly(ethylene oxide) chain inserted between the hydrophilic head and the hydrophobic tail. In this study, a nonlinear optical spectroscopic technique, sum frequency generation (SFG) vibration spectroscopy, was used to study the behavior of glutelin and extended as well as regular surfactants at the corn oil/water or aqueous solution interface. In most cases, the conventional surfactant shows better protein disordering or removal ability than the extended surfactant. However, with the addition of heat and salt to an extended surfactant solution, the experiment resulted in a substantial increase in the extended surfactant's protein disorder or removal ability.