Discovery of selective fragment-sized immunoproteasome inhibitors.

Proteasomes contribute to maintaining protein homeostasis and their inhibition is beneficial in certain types of cancer and in autoimmune diseases. However, the inhibition of the proteasomes in healthy cells leads to unwanted side-effects and significant effort has been made to identify inhibitors specific for the immunoproteasome, especially to treat diseases which manifest increased levels and activity of this proteasome isoform. Here, we report our efforts to discover fragment-sized inhibitors of the human immunoproteasome. The screening of an in-house library of structurally diverse fragments resulted in the identification of benzo[d]oxazole-2(3H)-thiones, benzo[d]thiazole-2(3H)-thiones, benzo[d]imidazole-2(3H)-thiones, and 1-methylbenzo[d]imidazole-2(3H)-thiones (with a general term benzoXazole-2(3H)-thiones) as inhibitors of the chymotrypsin-like (ß5i) subunit of the immunoproteasome. A subsequent structure-activity relationship study provided us with an insight regarding growing vectors. Binding to the ß5i subunit was shown and selectivity against the ß5 subunit of the constitutive proteasome was determined. Thorough characterization of these compounds suggested that they inhibit the immunoproteasome by forming a disulfide bond with the Cys48 available specifically in the ß5i active site. To obtain fragments with biologically more tractable covalent interactions, we performed a warhead scan, which yielded benzoXazole-2-carbonitriles as promising starting points for the development of selective immunoproteasome inhibitors with non-peptidic scaffolds.

Palladium (II) complexes with thione and thioalkylated thiosemicarbazones: Electrochemical, antimicrobial and thermogravimetric investigations.

Four methoxy substitute salicylidene thiosemicarbazones were synthesized. The reaction of both thione and thioalkylated thiosemicarbazones with PdCl2 in ethanol yields ONS-coordinated chelate complexes with general formula [Pd(L)Cl]. The structures of eight compounds were characterized by using analytical and spectroscopic methods. Electrochemistry of the Pd(II) complexes was studied using cyclic voltammetric technique. The CVs of the complexes were quite complicate because of some oxidative responses of the ligands which proceed by forming conjugated -N=CH-, -HC=CH- and -N=CH-HC=CH- groups. Two cathodic responses attributed to one electron reduction of Pd(II)/(I) and Pd(I)/(0) were observed for the central ion coordinated with S atom of H3C-S- group whereas only one reduction peak appeared when the Pd(II) coordinated with S atom of >C=S group of thiosemicarbazone ligand. The latter also showed an additional anodic response assigned to Pd(II)/(III) oxidation. Thermogravimetric analysis (TGA) technique was used to investigate and compare the thermal properties of the ligands and their metal complexes. In vitro antimicrobial activity of thiosemicarbazones and their complexes was evaluated against four Gram-negative bacteria, three Gram-positive bacteria, and antifungal activity against three fungi.

AP39, a Modulator of Mitochondrial Bioenergetics, Reduces Antiangiogenic Response and Oxidative Stress in Hypoxia-Exposed Trophoblasts: Relevance for Preeclampsia Pathogenesis.

Although the cause of preeclampsia, a pregnancy complication with significant maternal and neonatal morbidity, has not been fully characterized, placental ischemia attributable to impaired spiral artery remodeling and abnormal secretion of antiangiogenic factors are thought to be important in the pathogenesis of the disease. Placental ischemia could impair trophoblast mitochondrial function and energy production, leading to the release of reactive oxygen species (ROS). ROS have been shown to stabilize hypoxia-inducible factor (HIF)-1α, which, in turn, may induce transcription of antiangiogenic factors, soluble fms-like tyrosine kinase 1 (sFLT1), and soluble endoglin in trophoblasts. Herein, we tested whether the angiogenic imbalance and oxidative stress in the preeclamptic placenta may be prevented by improving mitochondrial function. First, to evaluate the cause-effect relationship between mitochondrial function and sFLT1 production, a human trophoblast primary cell culture model was established in which hypoxia induced mitochondrial ROS production and concurrent sFLT1 increase. Second, treatment with AP39, a novel mitochondria-targeted hydrogen sulfide donor, prevented ROS production, reduced HIF-1α protein levels, and diminished sFLT1 production. Finally, AP39, a modulator of mitochondrial bioenergetics enhanced cytochrome c oxidase activity, reversed oxidative stress and antiangiogenic response in hypoxic trophoblasts. These results suggest that placental hypoxia induces ROS production, HIF-1α stabilization, and sFLT1 up-regulation; these pathophysiological alterations can be attenuated by mitochondrial-targeted antioxidants.

New series of 3,5-disubstituted tetrahydro-2H-1,3,5-thiadiazine thione (THTT) derivatives: Synthesis and potent antileishmanial activity.

Four series of heterocyclic compounds, namely, tetrahydro-2H-1,3,5-thiadiazine thione derivatives were synthesized in good to excellent yields and were screened for their in vitro antileishmanial activities against Leishmania major (promastigotes). Most of the compounds showed significant antileishmanial activity within the range of IC50 = 15.48-39.36 µM when compared with standard pentamidine (IC50 = 14.95 µM). The structure-activity relationship showed that N-3 and N-5 substituents have a key role against leishmanicidal activity. The ester analogues (series B) were found to have a 1.5 to 5-fold reduced activity compared to their acidic counterparts. Cytotoxicity against mammalian mouse fibroblast 3 T3 cells was also evaluated and compared between the acid and its ester analogue. The reduction of antileishmanial activity and loss of toxicity in the newly developed THTT ester derivative indicates that these compounds can be used as a template study for the production of effective antileishmanial ester prodrugs.

Synthesis and characterization of new 1-hydroxy-2-pyridinethione derivatives: Their lead complexes and efficacy in the treatment of acute lead poisoning in rats.

A number of new mono- and dihydroxypyridinethione ligands have been synthesized via reaction of dimethylamine and amino acid esters with the active amide obtained from the reaction of 1-hydroxy-2-pyridinethione-4-carboxylic acid (1) and 1,1'-carbonyldiimidazole in DMF. Moreover, the lead complexes of these new ligands were also prepared. Structures of the newly synthesized compounds have been confirmed by different spectroscopic methods such as IR, 1H NMR, and 13C NMR, and by elemental analysis. The effect of these synthesized ligands on the excretion of lead, iron, and zinc, and their distribution in kidneys, liver, and bones in acutely intoxicated rats was investigated and results, for lead, were compared with those of the known drug meso-2,3-dimercaptosuccinic acid (DMSA). Results obtained revealed that compound 5 exhibits remarkable ability in total fecal and urinary excretion of lead and was superior to DMSA. In addition, results show that the concentration of lead in soft tissues and bones was lower in rats treated with HTPL than those treated with DMSA. Furthermore, the concentration of lead in liver tissues obtained from sub-chronic lead-intoxicated rats treated with HTPL was lower than those treated with DMSA and calcium disodium ethylenediaminetetraacetic acid (CaNa2EDTA).

Two goitrogenic 1,3-oxazolidine-2-thione derivatives from Brassicales taxa: Challenging identification, occurrence and immunomodulatory effects.

1,3-Oxazolidine-2-thione derivatives are glucosinolate-related food constituents known to impart (thyreo)toxic properties to some cruciferous vegetables. In this work, 5,5-dimethyl-1,3-oxazolidine-2-thione and (-)-(R)-5-phenyl-1,3-oxazolidine-2-thione, known goitrogens, were isolated from Draba lasiocarpa Rochel (Brassicaceae) and Reseda luteola L. (Resedaceae), respectively, and were fully spectrally characterized. Subsequently, the occurrence of the two 1,3-oxazolidine-2-thiones was verified in six additional taxa out of in total 78 screened Serbian Brassicales taxa. The stereochemistry of 5-phenyl-1,3-oxazolidine-2-thione was inferred from nuclear magnetic resonance experiments with a chiral lanthanide-shift reagent, employed in this work for the first time for this type of compounds. Unexpectedly, during gas chromatography, 5-phenyl-1,3-oxazolidine-2-thione underwent an unreported thermal core isomerization (1,3-oxazolidine-2-thione to 1,3-thiazolidine-2-one). These goitrogenic volatile glucosinolate products were tested for their effect on rat macrophage viability (three assays) and nitric oxide production. It was shown that the compounds displayed different levels of cytotoxicity. All tested compounds caused a significant lactate dehydrogenase leakage, but only (R)-5-phenyl-1,3-oxazolidine-2-thione statistically significantly reduced macrophage mitochondrial activity, whereas the racemic 5-phenyl-1,3-oxazolidine-2-thione and 5,5-dimethyl-1,3-oxazolidine-2-thione had little or no effect. Again only (R)-5-phenyl-1,3-oxazolidine-2-thione exerted nitric oxide production-inhibiting properties, suggesting the higher immunomodulatory potential of this enantiomer compared with its antipode and racemic mixture.

Lipophilic gold(I) complexes with 1,3,4-oxadiazol-2-thione or 1,3-thiazolidine-2-thione moieties: synthesis and their cytotoxic and antimicrobial activities.

Novel lipophilic gold(I) complexes containing 1,3,4-oxadiazol-2-thione or 1,3-thiazolidine-2-thione derivatives were synthesized and characterized by IR, high resolution mass spectrometry, and 1H, 13C 31P NMR. The cytotoxicity of the compounds was evaluated considering cisplatin and/or auranofin as reference in different tumor cell lines: colon cancer (CT26WT), metastatic skin melanoma (B16F10), breast adenocarcinoma (MCF-7), cervical carcinoma (HeLa), glioblastoma (M059 J). Normal human lung fibroblasts (GM07492-A) and kidney normal cell (BHK-21) were also evaluated. The gold(I) complexes were more active than their respective free ligands and cisplatin. Furthermore, antibacterial activity was evaluated against Gram-positive bacteria Staphylococcus aureus ATCC 25213, Staphylococcus epidermidis ATCC 12228 and Gram-negative bacteria Escherichia coli ATCC 11229 and Pseudomonas aeruginosa ATCC 27853 and expressed as the minimum inhibitory concentration (MIC). The complexes exhibited lower MIC values when compared to the ligands and chloramphenicol against Gram-positive bacteria and Gram-negative bacteria. Escherichia coli was sensitive one to the action of gold(I) complexes.

Measuring the adherence energy of the resin-metal interface with two fracture mechanics methods: The DCB and NTP tests.

OBJECTIVE: To evaluate the abilities of the DCB and the NTP test for measuring adherence of an adhesive joint between a resin and a metal interface. METHODS: Two-hundred stainless steel metal beams (diam. 50×5×2 mm) were cast and treated by the following methods: (1) sandblasting with aluminum oxide, followed by treatment with (2) the Rocatec system or (3) the Alloy primer. Superbond and Panavia F 2.0 were used as adhesives. The fracture energy (G1C) and fracture toughness (K1C) of two adhesives were compared by two-way analysis of variance. RESULTS: With the DCB test, Superbond was more effective than Panavia, regardless of the surface treatment and conditions of crack propagation. The overall effectiveness of the treatments was in the following order: sandblasting + Rocatec > sandblasting alone > sandblasting + Alloy primer. The adherence energy in an aqueous medium was lower than that in air. With the NTP test, similar performances were obtained with three surface treatments. However, the potential of Rocatec seemed slightly higher. CONCLUSIONS: The DCB and NTP tests provide independent measures of the inherent value of an adhesive. Rocatec appeared to provide greater resistance of the bonded joints in an aqueous environment.

Novel One-step Synthesis of Quinoline-2(1H)-thiones and Selones by Treating 3-Aryl-3-(2-aminophenyl)-1-propyn-3-ols with a Base and Elemental Sulfur or Selenium.

A one-step conversion of 3-aryl-3-(2-aminophenyl)-1-propyn-3-ols into quinoline-2(1H)-thiones and quinoline-2(1H)-selones was achieved only by treating the substrates with n-butyllithium and either elemental sulfur or selenium, respectively. The reactions were assumed to proceed through an intramolecular nucleophilic attack of the neighboring amino group to the plausible in situ generated reactive species related to chalcogenoketenes. The subsequent mCPBA oxidation of quinoline-2(1H)-selones afforded quinolin-2(1H)-ones in high yields.

Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?

PURPOSE: To determine whether universal primers alone can deliver similar levels of adhesion of resin cement to zirconia ceramic when compared to their application in conjunction with airborne-particle abrasion. MATERIALS AND METHODS: Sintered zirconia blocks (N = 160) (Lava, 3M ESPE), (5.25 × 5.25 × 3 mm3) were embedded in acrylic resin, polished, and randomly distributed into 16 groups (n = 10 per group), according to the factors "universal primer" (8 levels) and "air-particle abrasion" (2 levels): 1. ctr: control, without application of a universal primer; 2. AP: Alloy Primer; 3. MP: Monobond Plus; 4. MZP: Metal Zirconia Primer; 5. MZ: MZ Primer; 6. Sg: Signum Zirconia Bond; 7. SbU: Singlebond Universal; 8. ZP: Z Prime Plus. The universal primers were also used after air abrasion (A) of zirconia to form the following 8 groups: Ctr-A, AP-A, MP-A, MZP-A, MZ-A, Sg-A, SbU-A, and ZP-A. After ultrasonic cleaning, air abrasion was performed using Al2O3 particles (110 µm, 2.5 bar, 20 s at 10 mm) in a chairside air-abrasion device. After ultrasonic cleaning again, universal primers were applied according to each manufacturer's recommendation. The resin cement (RelyX ARC, 3M ESPE) was built up incrementally and photopolymerized on the zirconia surface using a silicone mold (Ø = 3.5, height = 3 mm). All specimens were stored in distilled water (60 days at 37°C) and then subjected to shear bond strength testing (SBS) in a universal testing machine (1 mm/min). On a separate set of zirconia specimens, contact angle measurements were made using the sessile drop technique with a goniometer after the application of universal primers on control and air-abraded zirconia surfaces. Data (MPa) were analyzed using one-way ANOVA, Tukey's test, and Student's t-test (α = 0.05). RESULTS: When universal primers were used alone, SbU presented significantly higher mean SBS (19.5 ± 5.8) that did the other primers (0 to 9.9 ± 6.6) (p = 0.001). When air abraded, the groups AP-A (14.1 ± 6.1), MP-A (15.9 ± 5.4), ZP-A (16.9 ± 7.3), SG-A (19.1 ± 2.1), SbU-A (12 ± 1.5) showed significant differences (p = 0.03). Adhesive performance of all universal primers was enhanced after air abrasion, with the exception of the SbU and MZ primers. After air abrasion, contact angle measurements were lower for the each primer (without air abrasion: 28.9 to 83.9; with air abrasion: 27.1 to 63.0), except for MZP. CONCLUSION: Air abrasion with 110 µm Al2O3 followed by universal primer application increased the bond strength of tested resin cement to zirconia, with the exception of SbU and MZ.

Specific glucosinolate analysis reveals variable levels of epimeric glucobarbarins, dietary precursors of 5-phenyloxazolidine-2-thiones, in watercress types with contrasting chromosome numbers.

Watercress obtained in food stores in the United States contained significant levels of epiglucobarbarin [(R)-2-hydroxy-2-phenylethylglucosinolate] and low levels of the 2S-epimer glucobarbarin identified by an HPLC+NMR+MS/MS approach. Typical combined levels were 4-7 µmol/g dry wt. The hydrolysis product, 5-phenyloxazolidine-2-thione (barbarin), was detected at similar levels as the precursor glucosinolates after autolysis of fresh watercress in water. Fragmentation patterns in MS(2) of reference desulfoglucosinolates were side chain specific and suitable for routine identification. Watercress was of two main glucosinolate chemotypes: Material from U.S. food stores had a complex profile including glucobarbarins, gluconasturtiin, indole glucosinolates and high levels (6-28 µmol/g dry wt.) of long-chain methylsulfinylalkyl and methylthioalkyl glucosinolates. Material from European food stores had a simple profile dominated by gluconasturtiin, with low levels of epiglucobarbarin and moderate levels of indole glucosinolates. Some wild U.S. material was similar to the U.S. food store type. Both types were found to be Nasturtium officinale by floral parts morphology. Cytological analysis of one U.S. food store accession indicated that it represented a chromosome-doubled variant within N. officinale. The nutritional consequences and invasive potential of the U.S. food store chemotype are discussed.

Comparison of shear test methods for evaluating the bond strength of resin cement to zirconia ceramic.

OBJECTIVE: This study compared the sensitivity of three shear test methods for measuring the shear bond strength (SBS) of resin cement to zirconia ceramic and evaluated the effects of surface treatment methods on the bonding. MATERIALS AND METHODS: Polished zirconia ceramic (Cercon base, DeguDent) discs were randomly divided into four surface treatment groups: no treatment (C), airborne-particle abrasion (A), conditioning with Alloy primer (Kuraray Medical Co.) (P) and conditioning with Alloy primer after airborne-particle abrasion (AP). The bond strengths of the resin cement (Multilink N, Ivoclar Vivadent) to the zirconia specimens of each surface treatment group were determined by three SBS test methods: the conventional SBS test with direct filling of the mold (Ø 4 mm × 3 mm) with resin cement (Method 1), the conventional SBS test with cementation of composite cylinders (Ø 4 mm × 3 mm) using resin cement (Method 2) and the microshear bond strength (µSBS) test with cementation of composite cylinders (Ø 0.8 mm × 1 mm) using resin cement (Method 3). RESULTS: Both the test method and the surface treatment significantly influenced the SBS values. In Method 3, as the SBS values increased, the coefficients of variation decreased and the Weibull parameters increased. The AP groups showed the highest SBS in all of the test methods. Only in Method 3 did the P group show a higher SBS than the A group. CONCLUSIONS: The µSBS test was more sensitive to differentiating the effects of surface treatment methods than the conventional SBS tests. Primer conditioning was a stronger contributing factor for the resin bond to zirconia ceramic than was airborne-particle abrasion.

An in vitro comparison of shear bond strength of zirconia to enamel using different surface treatments.

PURPOSE: The purpose of this in vitro study was to compare the shear bond strength of an airborne-particle abraded zirconia, an acid-etched zirconia (Piranha solution), an Alloy Primer treated zirconia, and a silaned zirconia to enamel, all bonded with a phosphate-methacrylate resin luting agent. MATERIALS AND METHODS: Seventy extracted intact human molars were collected, cleaned, and mounted in autopolymerizing acrylic resin, with the experimental surface of the teeth exposed. The specimens were randomly divided into seven groups of zirconia specimens (4 mm diameter, 2 mm thick). Group 1: Airborne-particle abrasion; group 2: Airborne-particle abrasion and Z-PRIME Plus; group 3: Airborne-particle abrasion and alloy primer; group 4: Piranha solution 7:1; group 5: Piranha solution 7:1 and Z-PRIME Plus; group 6: Piranha solution 7:1 and Alloy primer; group 7: CoJet and silane. All specimens were luted with a phosphate-methacrylate resin luting agent (Panavia F2.0) and stored in distilled water for 1 day, then thermocycled (5°C and 55°C) for 500 cycles and tested for shear bond strength (SBS), measured in MPa, with a universal testing machine at a 0.55 mm/min crosshead speed. All specimens were inspected under a scanning electron microscope to determine mode of failure. The mean values and standard deviations of all specimens were calculated for each group. A one-way ANOVA was performed, and multiple pairwise comparisons were then completed with post hoc Tukey test (alpha = 0.05). RESULTS: The airborne-particle abrasion and Z-PRIME Plus group resulted in a significantly higher SBS than the other groups (21.11 ± 6.32 MPa) (p < 0.001). The CoJet and silane group (15.99 ± 8.92 MPa) and airborne-particle abrasion and alloy primer group (11.07 ± 4.34 MPa) showed high shear bond strength but not statistically significant from the airborne-particle abrasion group (14.23 ± 5.68 MPa). Failure mode was predominately mixed in groups 1, 2, 3, and 7 with islands of retained resin on the zirconia and enamel surfaces; however, groups 4, 5, and 6 showed mostly adhesive failures, which left the zirconia surface free of the adhesive materials. No cohesive failures of the substrates (ceramic, resin, or enamel) were observed. CONCLUSION: Airborne-particle abrasion followed by the application of a zirconia primer produced the highest bond strength to enamel. Therefore, it can be recommended as a promising surface treatment method to achieve a durable bond to densely sintered zirconia ceramics.

Pre-clinical pharmacokinetics and acute toxicological evaluation of a monastrol derivative anticancer candidate LaSOM 65 in rats.

1. The present work investigated the pharmacokinetic and tissue distribution as well as acute toxicity of a new chemical entity (NCE), the anticancer candidate LaSOM 65 in Wistar rats. 2. LaSOM 65 pharmacokinetics was investigated after intravenous (i.v., 1 mg/kg) and oral (p.o., 10 and 30 mg/kg) dosing. Tissue distribution was assessed after i.v. bolus dose. Acute toxicity was evaluated after i.v. (1, 2.5 and 5 mg/kg) and p.o. (50, 100 and 150 mg/kg) administration. 3. Short half-life (1.75 ± 0.71 h), a clearance of 0.85 ± 0.18 L/h/kg and a volume of distribution of 1.76 ± 0.24 L/kg were observed after i.v. dosing. The compound showed good bioavailability and linear pharmacokinetics after oral doses. The NCE distributes consistently in lung and fatty tissues, with penetration ratios of 2.7 and 1.4, respectively. The other tissues investigated presented smaller penetration ratios. Adverse clinical symptoms were observed only after i.v. administration, and regressed 3 h after dosing. Compared with controls, no statistical differences were found for serum analysis, body weight and relative organ weight, indicating no acute toxicological effects. 4. Overall, LaSOM 65 showed good pharmacokinetic characteristics and no signs of acute toxicity, indicating that it is a promising anticancer candidate.

Failure load of teeth restored by use of alumina copings: Influence of residual tooth structure and cementation.

To evaluate failure loads of teeth restored by use of alumina-coping, and to assess the effects of different amounts of residual tooth structure and different cements, standardized artificial alumina copings were fabricated on seventy-two molars. 24 of the copings were cemented by use of an adhesive resin cement (P-group), n=24 by use of glass-ionomer cement (K-group), and n=24 by use of a self-adhesive modified composite resin-cement (R-group). After artificial ageing (10,000 thermal-cycles between 6.5 and 60°C; 1,200,000 chewing cycles with Fmax=64 N), the specimens were loaded until failure (cross-head-speed: 0.5 mm/min). In the K-group 83% of the specimens failed during chewing simulation. Statistical analysis included chi-squared-test, unpaired-to-sample-t-test, and ANOVA. For severely damaged teeth, loads to failure in the P-group (384 N) were significantly (p=0.03) higher than in the R-group (295 N). For severely damaged teeth, use of composite resin cement resulted in higher loads to failure than use of other cements.

Effects of sandblasting, H2SO4/HCl etching, and phosphate primer application on bond strength of veneering resin composite to commercially pure titanium grade 4.

This study investigated the effects of surface treatments on the bond strength of a resin composite to a commercially pure titanium. The bonding surfaces of all titanium specimens were ground with 1,000-grit silicon carbide paper and then subjected to one or more of these surface treatments: sandblasting with alumina (sand), etching with 45wt% H2SO4 and 15wt% HCl (SH-etchant) at 70°C for 10 min, and/or phosphate primer (MDP-primer) application. Specimens not subjected to any surface treatment were used as controls. After resin composite veneer placement and 24-h water immersion, the shear bond strengths of the specimens in descending order were: sand/SH-etchant/MDP-primer, sand/SH-etchant/no primer, no sand/SH-etchant/MDP-primer, sand/no etch/MDP-primer, no sand/SH-etchant/no primer, sand/no etch/no primer, no sand/no etch/MDP-primer, no sand/no etch/no primer. Scanning electron microscope observations revealed that sandblasting and SH-etchant created many micro- and nanoscale cavities on the titanium surface. Results showed that a combined use of sandblasting, SH-etchant, and MDP-primer application had a cooperative effect on titanium bonding.

Design, synthesis and antihypertensive screening of novel pyridazine substituted s-triazin-2-imine/one/thione derivatives.

Some new 7-substituted-phenyl-3,4,8,9-tetrahydro-2H-pyridazino[1,6-a][1,3,5]triazin-2-imine/one/thione derivatives were synthesized by a sequence of reactions starting from appropriate aryl hydrocarbons. The final compounds were screened for antihypertensive activities by non-invasive method using Tail Cuff method. All the test compounds showed significant antihypertensive activity; 7-(biphenyl-4-yl)-3,4,8,9-tetrahydro-2H-pyridazino[1,6-a][1,3,5]triazin-2-imine (4p) exhibited antihypertensive activity more than the reference standard drugs.

Wear at the titanium-titanium and the titanium-zirconia implant-abutment interface: a comparative in vitro study.

OBJECTIVE: The purpose of this study was to determine and measure the wear of the interface between titanium implants and one-piece zirconia abutments in comparison to titanium abutments. METHODS: 6 implants were secured into epoxy resin blocks. The implant interface of these implants and 6 corresponding abutments (group Zr: three one-piece zirconia abutments; group Ti: three titanium abutments) were examined by a microscope and scanning electron micrograph (SEM). Also the implants and the abutments were scanned by 3D-Micro Computer Tomography (CT). The abutments were connected to the implants and cyclically loaded with 1,200,000 cycles at 100N in a two-axis fatigue testing machine. Afterwards, all specimens were unscrewed and the implants and abutments again were scanned by microscope, SEM and CT. The microscope and SEM images were compared, the CT data were superimposed and the wear was calculated by inspection software. The statistical analysis was carried out with an unpaired t-test. RESULTS: Abutment fracture or screw loosening was not observed during cyclical loading. Comparing the microscope and SEM images more wear was observed on the implants connected to zirconia abutments. The maximum wear on the implant shoulder calculated by the inspection software was 10.2µm for group Zr, and 0.7µm for group Ti. The influence of the abutment material on the measured wear was statistically significant (p≤0.001; Levene-test). SIGNIFICANCE: Titanium implants showed higher wear at the implant interface following cyclic loading when connected to one-piece zirconia implant abutments compared to titanium abutments. The clinical relevance is not clear; hence damage of the internal implant connection could result in prosthetic failures up to the need of implant removal.

Influence of air-abrasion and subsequent heat treatment on bonding between zirconia framework material and indirect composites.

The purpose of this study was to evaluate the influence of air-abrasion and subsequent heat treatment on the shear bond strength of the bond between indirect composites and a zirconia material. Four surface preparations were employed; ground flat, then heated to regenerate the crystal phase (C); air-abraded with alumina for 10 s (S10), for 20 s (S20), and air-abraded for 10 s and heated (H). Disks were primed with Alloy Primer and bonded either with Estenia or with Gradia composite. XRD analysis suggested that the monoclinic zirconia content was increased by air-abrasion, and decreased by heating. The surface roughness of S10, S20 and H disks was similar. Nevertheless, H groups showed lower bond strengths than the S10 and S20 groups both before and after thermal cycling. Although alumina air-abrasion considerably enhanced bonding between zirconia and indirect composites, subsequent heat treatment had a negative effect on the durability of bond strength.

Synthesis and evaluation of 2(3H)-thiazole thiones as tyrosinase inhibitors.

A series of 2(3H)-thiazole thiones 3-5 was synthesized and evaluated for tyrosinase inhibition and DPPH radical scavenging activities. Among them, 3-methyl-4-phenyl-2(3H)-thiazole thione (4a) showed good tyrosinase inhibitory activity, even better than that of the well-known tyrosinase inhibitor, namely, kojic acid. From the structure-activity point of view, although it was found that the phenolic hydroxyl group in prototype 3-5 might contribute to the scavenging activity against DPPH radicals, there was no correlation between the potency of tyrosinase inhibition and the presence of the phenolic moiety. The in silico ADME-Tox screening revealed that the drug-likeness and drug-score values of the most potent compound 4a were significantly higher than those of kojic acid.