Type III hypersensitivity reactions to a B cell epitope antigen are abrogated using a depot forming vaccine platform.

Peptide antigens are combined with an adjuvant in order to increase immunogenicity in vivo. The immunogenicity and safety of a RSV vaccine formulated in a novel oil-based platform, DepoVax™ (DPX), was compared to an alum formulation. A peptide B cell epitope derived from RSV small hydrophobic ectodomain (SHe) served as the antigen. Both vaccines induced SHe-specific antibodies after immunization of mice. A single dose of the DPX-based formulation resulted in anti-SHe titres for up to 20 weeks. Boosting with Alum-SHe, but not with DPX-SHe, led to unexpected clinical signs such as decreased activity, cyanosis and drop in body temperature in mice but not in rabbits. The severity of adverse reactions correlated with magnitude of SHe-specific IgG immune responses and decreased complement component 3 plasma levels, indicating a type III hypersensitivity reaction. By RP-HPLC analysis, we found that only 8-20% of the antigen was found to be adsorbed to alum in vitro, indicating that this antigen is likely released systemically upon injection in vivo. Clinical signs were not observed in rabbits, indicating the response correlates with peptide dose relative to size of animal. These results suggest that peptide antigens targeted to produce B cell mediated response may result in increased incidence of type III hypersensitivity reactions when delivered in non-depot forming vaccines. The DPX formulation induced strong antibody titres to the antigen without causing adverse events, likely due to the strength of the depot in vivo, and demonstrates the potential safety and immunogenicity of this platform for B cell peptide antigens.

Development of a synthetic Vi polysaccharide vaccine for typhoid fever.

Typhoid fever remains a serious public health problem with a high impact on toddlers and young children. Vaccines against the Vi capsular polysaccharide are efficacious against typhoid fever demonstrating that antibodies against Vi confer protection. The currently licensed Vi typhoid vaccines have however limited efficacy and are manufactured by a complex process from wild-type bacteria. Due to these inherent issues with the current vaccines, an alternative vaccine based on an O-acetylated high molecular weight (HMW) polygalacturonic acid (GelSite-OAc™) was generated. The HMW polygalacturonic acid shares the same backbone as the Vi polysaccharide of Salmonella Typhi. The GelSite-OAc™ has a high molecular weight (>1 × 106 Da) and a high degree of O-acetylation (DOAc) (>5 µmole/mg), both exceeding the potency specifications of the current Vi vaccine. Studies in Balb/c mice demonstrated that GelSite-OAc™ was highly immunogenic, inducing a strong antigen-specific antibody response in a DOAc- and dose-dependent manner which was comparable to or higher than those induced by the licensed Vi vaccine. Importantly, the GelSite-OAc™ was shown to be fully protective in mice against lethal challenge with Salmonella Typhi. Furthermore, the GelSite-OAc™ demonstrated a boosting effect or memory response, exhibiting a >2-fold increase in antibody levels upon the second immunization with either GelSite-OAc™ or the Vi vaccine. This novel boosting effect is unique among polysaccharide antigens and potentially makes GelSite-OAc™ effective in people under 2 years old. Together these results suggest that the GelSite-OAc™ could be a highly effective vaccine against Salmonella Typhi.

Synthesis of Effective Food Constituents toward the Development of Chemical Biology Investigations.

This article describes the development of various probes and immunogens for chemical-biological investigations of food flavonoids. We accomplished a large (gram)-scale asymmetric synthesis of a key intermediate, 5-aminopentyl deoxy epigallocatechin-3-gallate (APDOEGCg; 3), an analogue of green tea polyphenol EGCg, in which the key step was cationic cyclization utilizing neighboring group participation of the gallate carbonyl group. The synthetic APDOEGCg (3) was efficiently converted to a fluorescent probe 18 and an immunogen 19 by utilizing the high reactivity of the amine functional group. We confirmed the usefulness of these probes for imaging studies and the generation of antibodies, respectively. We also describe the efficient synthesis of a positron emission tomography (PET) probe [11C]20 by incorporation of 11C into EGCg (1), for which synthetic 4″-Me-EGCg (20) was utilized as an authentic sample. Our synthetic strategy was also applied for the practical synthesis of nobiletin (21), a polymethoxylated flavone from citrus. Synthetic nobiletin was readily converted to various probes by selective demethylation and incorporation of fluorescein, biotin or 11C. These probes should be useful for a range of biological applications. Detailed examination of the mechanisms and further applications are in progress.

Lipopeptide Nanoparticles: Development of Vaccines against Hookworm Parasite.

Necator americanus (hookworm) infects over half a billion people worldwide. Anthelminthic drugs are commonly used to treat the infection; however, vaccination is a more favorable strategy to combat this parasite. We designed new B-cell peptide epitopes based on the aspartic protease of N. americanus (Na-APR-1). The peptides were conjugated to self-adjuvanting lipid core peptide (LCP) systems via stepwise solid-phase peptide synthesis (SPPS) and copper catalyst azide-alkyne cycloaddition (CuAAC) reactions. The LCP vaccine candidates were able to self-assemble into nanoparticles, were administered to mice without the use of additional adjuvant, and generated antibodies that recognized the parent epitope. However, only one LCP derivative was able to produce a high titer of antibodies specific to Na-APR-1; circular dichroism analyses of this compound showed a ß-sheet conformation for the incorporated epitope. This study provides important insight in epitope and delivery system design for the development of a vaccine against hookworm infections.

Preformulation characterization of an aluminum salt-adjuvanted trivalent recombinant protein-based vaccine candidate against Streptococcus pneumoniae.

The preformulation of a trivalent recombinant protein-based vaccine candidate for protection against Streptococcus pneumoniae is described both in the presence and in the absence of aluminum salt adjuvants. The biophysical properties of the three protein-based antigens, fragments of pneumococcal surface adhesion A (PsaA), serine-threonine protein kinase (StkP), and protein required for cell wall separation of group B streptococcus (PcsB), were studied using several spectroscopic and light scattering techniques. An empirical phase diagram was constructed to assess the overall conformational stability of the three antigens as a function of pH and temperatures. A variety of excipients were screened on the basis of their ability to stabilize each antigen using intrinsic fluorescence spectroscopy and circular dichroism spectroscopy. Sorbitol, sucrose, and trehalose stabilized the three proteins in solution. The addition of manganese also showed a drastic increase in the thermal stability of SP1650 in solution. The adsorption and desorption processes of each of the antigens to aluminum salt adjuvants were evaluated, and the stability of the adsorbed proteins was then assessed using intrinsic fluorescence spectroscopy and Fourier transform infrared spectroscopy. All the three proteins showed good adsorption to Alhydrogel. PsaA was destabilized when adsorbed onto Alhydrogel® and adding sodium phosphate showed a stabilizing effect. PcsB was found to be stabilized when adsorbed to Alhydrogel®, and no destabilizing or stabilizing effects were seen in the case of StkP.

[Current development of rapid high-throughout determination technology for total components of traditional Chinese medicines and formula and synthetic immunity chip method].

The qualitative and quantitative analysis on traditional Chinese medicine and formula components can be made by chemical and instrumental analysis methods. Of both, the instrumental analysis methods play a dominant role, including HPLC, HPLC-MS, HPLC-NMR, GC, GC-MS, biochemical and biological effect. But because traditional Chinese medicines and formula have complicated components, chemical methods are so unspecific that they shall be used less or with caution. While instrumental analysis methods are so specific that they are appropriate for analyzing complicated single component. The analysis techniques for multiple components of traditional Chinese medicines and formula focus on fingerprints, but all of these analysis techniques are limited by the pre-requisite of separation and the lack of general-purpose detectors and therefore being hard to realize the determination of all components of traditional Chinese medicines and formula. In the natural world, however, organisms identify native and alien components through specificity and non-specificity of clusters decided by antigens and antibodies. For example, components of traditional Chinese medicines are directly or indirectly synthesized into antigens and injected into animals, in order to generate specific antibodies and then collect cross reaction information of these components to specific antibodies. As for components without cross reaction, their contents shall be directly read out on the basis of the inhibition rate curve of competitive reaction for specificity of antigens and antibodies. Besides, a cross inhibition rate matrix shall be established first, and them a multiple regression linear equation between cross component concentration or concentration logarithm and inhibition rate by labeling the immunity competitive reaction between antibodies and haptens of traditional Chinese medicine and compound components, and then solved to obtain concentration of each component. The two results are combined to establish the synthetic immunity chip method for traditional Chinese medicine and formula components.

Long term stability of a recombinant Plasmodium falciparum AMA1 malaria vaccine adjuvanted with Montanide(®) ISA 720 and stabilized with glycine.

Plasmodium falciparum apical membrane antigen 1 (AMA1) is an asexual blood-stage vaccine candidate against the malaria parasite. AMA1-C1/ISA 720 refers to a mixture of recombinant AMA1 proteins representing the FVO and 3D7 alleles in 1:1 mass ratio, formulated with Montanide(®) ISA 720 as a water-in oil emulsion. In order to develop the AMA1-C1/ISA 720 vaccine for human use, it was important to determine the shelf life of this formulation. Previously it was found 267 mM glycine stabilized the proteins in Montanide(®) ISA 720 formulations for a short period of time at 2-8°C [25]. We now test the long term stability of AMA1-C1 at 10 and 40 µg/mL formulated with Montanide(®) ISA 720 with 50mM glycine as a stabilizer. Stability of AMA1-C1/ISA 720 at different time points following formulation (0, 5, 12 or 18 months) was evaluated by determining the mean particle size (diameter of the mean droplet volume), total protein content by a Modified Lowry assay, identity and integrity using western blot and SDS-PAGE. Our results showed that the mean particle size of these emulsions increased over time, whereas protein content, as determined by an ELISA method using a monoclonal antibody against penta-his, decreased over time. For the 10 µg/mL AMA1-C1/ISA 720 vaccine, the protein content was 6.5±2.2 µg/mL, and for the 40 µg/mL AMA1-C1/ISA 720 vaccine, the protein content was only 8.2±2.3 µg/mL after 18 months of storage at 2-8°C. These results suggest that the integrity of the protein was affected by long-term storage. The results of the present study indicate that the AMA1-C1/ISA 720 emulsion was unstable after 12 months of storage, after which AMA1-C1 proteins were partially degraded.

Efficacy of recombinant anthrax vaccine against Bacillus anthracis aerosol spore challenge: preclinical evaluation in rabbits and Rhesus monkeys.

This report describes the immunogenicity and protective efficacy of Escherichia coli-expressed recombinant protective antigen (rPA) in New Zealand White rabbits and Rhesus Macaques against an aerosol challenge with Bacillus anthracis spores (IVRI strain, tox+cap+). A dose-ranging study was performed in which it became evident that the level of anti-PA IgG and toxin-neutralizing antibody titer was directly proportional to the dose of rPA administered. However, the onset time of primary and secondary immune response was not dependent on the dosage. Revaccination of primed animals with the same threshold dose yielded a robust and rapid secondary response. Quantitative differences in peak titers were obtained for both the animal models, in addition to qualitative differences in the immune kinetics. In spite of a weak priming response, the secondary response in rabbits peaked earlier than that in macaques once the booster dose was administered. However, evaluation of the post-challenge quantitative anti-rPA ELISA titer measurements indicated higher titers for non-human primates as compared to the lagomorphs. Importantly, 100% protection was seen for the dosage groups that received > or = 25 microg rPA, following a challenge against a target dose of 1000 LD(50) of aerosolized spores of Bacillus anthracis.

Analysis of epitope-specific immune responses induced by vaccination with structurally folded and unfolded recombinant Bet v 1 allergen derivatives in man.

Previously, we have constructed recombinant derivatives of the major birch pollen allergen, Bet v 1, with a more than 100-fold reduced ability to induce IgE-mediated allergic reactions. These derivatives differed from each other because the two recombinant Bet v 1 fragments represented unfolded molecules whereas the recombinant trimer resembled most of the structural fold of the Bet v 1 allergen. In this study, we analyzed the Ab (IgE, IgG subclass, IgA, IgM) response to Bet v 1, recombinant and synthetic Bet v 1-derived peptides in birch pollen allergic patients who had been vaccinated with the derivatives or adjuvant alone. Furthermore, we studied the induction of IgE-mediated skin responses in these patients using Bet v 1 and Bet v 1 fragments. Both types of vaccines induced a comparable IgG1 and IgG4 response against new sequential epitopes which overlap with the conformational IgE epitopes of Bet v 1. This response was 4- to 5-fold higher than that induced by immunotherapy with birch pollen extract. Trimer more than fragments induced also IgE responses against new epitopes and a transient increase in skin sensitivity to the fragments at the beginning of therapy. However, skin reactions to Bet v 1 tended to decrease one year after treatment in both actively treated groups. We demonstrate that vaccination with folded and unfolded recombinant allergen derivatives induces IgG Abs against new epitopes. These data may be important for the development of therapeutic as well as prophylactic vaccines based on recombinant allergens.

Increased immunogenicity of recombinant Ad35-based malaria vaccine through formulation with aluminium phosphate adjuvant.

Previously, we have shown the potency of recombinant Adenovirus serotype 35 viral vaccines (rAd35) to induce strong immune response against the circumsporozoite protein (CS) of the plasmodium parasite. To further optimize immunogenicity of Ad35-based malaria vaccines we formulated rAd35.CS vaccine with aluminium phosphate adjuvant (AlPO(4)). In contrast to the conventional protein based vaccines no absorption to aluminium adjuvant was observed and rAd35 viral in vitro infectivity in mammalian cells was preserved. Immunization with Ad35.CS formulated with AlPO(4) resulted in significantly higher CS specific T and B cell responses in mice upon either single or prime-boost vaccination regimens as compared to rAd35.CS alone. With these results we report for the first time the feasibility of using an AlPO(4) adjuvant to increase the potency of a live adenovirus serotype 35-based vaccine.

Physico-chemical characterisation and immunogenicity of a multi-valent candidate vaccine against non-typeable Haemophilus influenzae and Moraxella catarrhalis.

The physico-chemical characteristics and immunogenicity of a candidate vaccine against otitis media, prepared from recombinant lipidated outer membrane proteins (rLP4 and rLP6) from non-typeable Haemophilus influenzae (NTHi) and of the ubiquitous cell surface protein UspA2 from Moraxella catarrhalis, were evaluated. Optical spectroscopy, size exclusion chromatography and gel electrophoresis were used to characterise the purified protein components and assess their purity and molecular sizes. The results showed that the three proteins were highly purified. Possible dimers in rLP4, dimers and multimers in rLP6 and UspA2 were detected. Small amounts of rLP4 and rLP6 dimers and most of UspA2 complexes remained tightly bound even after SDS treatment under reducing conditions. Immunogenicity studies showed that all proteins induced substantial antibody responses in mice immunised with AlPO4-adsorbed rLP4, rLP6 or UspA2 or a combination of these proteins. However, combination of these proteins resulted in a reduced response to rLP4 and rLP6, but not to UspA2, suggesting interference between these proteins which should be taken into consideration during the development and evaluation of this vaccine.

Safety, antigenicity, and efficacy of a recombinant coccidioidomycosis vaccine in cynomolgus macaques (Macaca fascicularis).

The safety, immunogenicity and efficacy of recombinant Ag2/PRA106 + CSA chimeric fusion protein (CFP) vaccine in ISS/Montanide adjuvant-administered intramuscular (IM) was assessed in adult female cynomolgus macaques challenged with Coccidioides posadasii. Animals received three immunizations with either 5 microg CFP, 50-microg CFP, or adjuvant alone and were challenged 4 weeks following the final immunization. Although significant antibody response was produced in response to vaccination, there were no discernable adverse effects, suggesting that the vaccine was well tolerated. Upon intratracheal challenge, all animals showed evidence of disease. Two animals that received 5-microg doses of CFP were euthanatized prior to the study's end because of severe symptoms. Animals vaccinated with 50-microg doses of CFP showed evidence of enhanced sensitization compared to adjuvant controls and animals vaccinated with 5-microg doses of CFP. This was based on higher serum anti-CFP titers, enhanced secretion of interferon-gamma (IFN-gamma) from stimulated bronchoalveolar lavage mononuclear cells (BALMC), reduced pulmonary radiologic findings following intratracheal challenge, reduced terminal complement fixation titers, and reduced necropsy findings. Overall the vaccine was well tolerated, induced sensitization, and resulted in a protective response when given at the higher 50-microg dose. Additional experiments may be needed to optimize the vaccination and to confer greater protection against lethal challenge.

Method for the synthesis of multi-epitopic Streptococcus pyogenes lipopeptide vaccines using native chemical ligation.

The aim of this study was to investigate methods for the synthesis of highly pure, well-characterized analogues of the lipid core peptide (LCP) system. Difficulties synthesizing and purifying conventional LCP systems have led to the requirement for a technique to produce highly pure, LCP-based vaccines for potential use in human clinical trials. The current study describes methods for the attachment of lipophilic adjuvants onto multi-epitopic peptide vaccines. Described is the synthesis, using native chemical ligation, of a highly pure, tri-epitopic, group A streptococcal (GAS) lipopeptide vaccine candidate. Intranasal immunization of the described tri-epitopic GAS lipopeptide with the mucosal adjuvant cholera toxin B subunit induced high serum IgG antibody titers specific for each of the incorporated peptide epitopes.

General strategies for efficient adjuvant incorporation of recombinant subunit immunogens.

We have previously reported strategies for Escherichia coli production of recombinant immunogens fused to hydrophobic peptides or lipid tags to improve their capacity to be incorporated into an adjuvant formulation, e.g., immunostimulating complexes (iscoms). Recently, we also explored the strong interaction between biotin and streptavidin to achieve iscom association of recombinant immunogens. Plasmodium falciparum,Toxoplasma gondii and Neospora caninum antigens have served as model immunogens in the different studies. Generated fusion proteins have been found to be successfully incorporated into iscoms and high-titer antigen-specific antibody responses have been obtained upon immunization of mice. We believe that the different concepts presented, utilizing either hydrophobic peptide or lipid tags, or the recently explored biotin-streptavidin principle, offer convenient methods to achieve efficient adjuvant incorporation of recombinant immunogens.

Mechanism of adsorption of three recombinant Streptococcus pneumoniae (Sp) vaccine antigens by an aluminum adjuvant.

The adsorption of three Streptococcus pneumoniae (Sp) vaccine antigens by aluminum-containing adjuvants was studied. The antigens showed high binding affinity isotherms with aluminum hydroxide adjuvant described by the Langmuir equation but virtually no binding to aluminum phosphate adjuvant. The effects of ionic strength and ethylene glycol were evaluated to determine whether electrostatic or hydrophobic interactions were responsible for the observed binding to aluminum hydroxide, but no significant change in the adsorptive capacity was observed at either high ionic strength nor high concentrations of ethylene glycol for any of the antigens. This indicates that neither electrostatic nor hydrophobic interactions appear to be responsible for the observed binding, which means that ligand exchange may be the primary mechanism for this interaction. Further studies to evaluate the ability to elute a Sp antigen from aluminum hydroxide using fibrinogen (adsorptive coefficient 2.2 mL/microg) as a competitive protein resulted in evidence that Sp antigen follows the trend that proteins with higher adsorptive coefficients are able to displace those with lower adsorptive coefficients. It was also noted that the Sp antigens and alpha-lactalbumin (adsorptive coefficient 1.8 mL/microg) have similar adsorptive coefficients indicative of high affinity binding isotherms but do not contain phosphate, which has previously been used to explain ligand exchange for such proteins as alpha-casein and hepatitis B surface antigen (HBsAg). Further investigations using alpha-lactalbumin as a model protein may elucidate the binding interaction between the antigens in this study and aluminum adjuvants.

Applying biotin-streptavidin binding for iscom (immunostimulating complex) association of recombinant immunogens.

We have previously reported strategies for Escherichia coli production of recombinant immunogens fused to hydrophobic peptide or lipid tags to improve their capacity to be incorporated into an adjuvant formulation. In the present study, we have explored the strong interaction between biotin and SA (streptavidin) (K(D) approximately 10(-15) M) to couple recombinant immunogens to iscoms (immunostimulating complexes). Two different concepts were evaluated. In the first concept, a His(6)-tagged SA fusion protein (His(6)-SA) was bound to Ni(2+)-loaded iscom matrix (iscom without associated protein), and biotinylated immunogens were thereafter associated with the SA-coated iscoms. The immunogens were either biotinylated in vivo on E. coli expression or double biotinylated in vivo and in vitro. In the second concept, the recombinant immunogens were expressed as SA fusion proteins, which were directly bound to a biotinylated iscom matrix. A 53-amino-acid malaria peptide (M5), derived from the central repeat region of the Plasmodium falciparum blood-stage antigen Pf155/RESA, and a 232-amino-acid segment (SRS2') from the central region (from Pro-97 to Lys-328) of the major surface antigen NcSRS2 of the protozoan parasite Neospora caninum, served as model immunogens in the present study. All fusion proteins generated were found to be efficiently expressed and could be recovered to high purity using affinity chromatography. The association between the different immunogen-containing fusion proteins and the corresponding iscom matrix was demonstrated by analytical ultracentrifugation in a sucrose density gradient. However, some fusion proteins were, to a certain extent, also found to associate unspecifically with a regular iscom matrix. Furthermore, selected iscom fractions were demonstrated to induce high-titre antigen-specific antibody responses on immunization of mice. For the particular target immunogen SRS2', the induced antibodies demonstrated reactivity to the native antigen NcSRS2. We believe that the presented concepts offer convenient methods to achieve efficient adjuvant association of recombinant immunogens, and the advantages and disadvantages of the two concepts are discussed.

Evaluation of the compatibility of a second generation recombinant anthrax vaccine with aluminum-containing adjuvants.

Recombinant protective antigen (rPA) is the active pharmaceutical ingredient in a second generation anthrax vaccine undergoing pre-clinical evaluation. This rPA vaccine differs from the currently licensed vaccine, anthrax vaccine adsorbed (AVA), in that the sole component is a recombinant form of protective antigen (PA). Unlike AVA the rPA vaccine contains no lethal factor (LF) or edema factor (EF), components of the two bipartite toxins, nor many other Bacillus anthracis-related contaminating proteins that are present in AVA. The proposed clinical protocol involves adsorption of the rPA to an aluminum-based adjuvant. The adsorptive characteristics of rPA and two aluminum-containing adjuvants were examined in a physiological buffer with and without EDTA. Based on the pI of rPA (pI=5.6) and the zero charge point of aluminum hydroxide adjuvant (11.5) and aluminum phosphate adjuvant (4.5), it was predicted and demonstrated that rPA bound in a more efficient manner to aluminum hydroxide adjuvant than to aluminum phosphate adjuvant in the physiological buffer. Binding of the rPA to the aluminum hydroxide adjuvant was decreased by increasing amounts of phosphate in the buffer. The adsorptive capacity for rPA onto aluminum hydroxide adjuvant in the physiological buffer and in water were calculated to be 0.46 mg rPA/mg aluminum in DPBS and 0.73 mg rPA/mg aluminum in water. This study also demonstrated that upon desorption from the aluminum hydroxide adjuvant the rPA was physically intact and free of detectable aggregates. Further, the eluted material was biologically active in an in vitro cytotoxicity assay. Desorption was only possible after an overnight incubation of 2-8 degrees C and not after a room temperature incubation reflecting increased contact with the aluminum hydroxide adjuvant over time. These data suggest that the interaction between rPA and aluminum hydroxide adjuvant is predominantly electrostatic in character.

Development and pre-clinical analysis of a Plasmodium falciparum Merozoite Surface Protein-1(42) malaria vaccine.

Merozoite Surface Protein-1(42) (MSP-1(42)) is a leading vaccine candidate against erythrocytic malaria parasites. We cloned and expressed Plasmodium falciparum MSP-1(42) (3D7 clone) in Escherichia coli. The antigen was purified to greater than 95% homogeneity by using nickel-, Q- and carboxy-methyl (CM)-substituted resins. The final product, designated Falciparum Merozoite Protein-1 (FMP1), had endotoxin levels significantly lower than FDA standards. It was structurally correct based on binding conformation-dependent mAbs, and was stable. Functional antibodies from rabbits vaccinated with FMP1 in Freund's adjuvant inhibited parasite growth in vitro and also inhibited secondary processing of MSP-1(42). FMP1 formulated with GlaxoSmithKline Biologicals (GSK) adjuvant, AS02A or alum was safe and immunogenic in rhesus (Macaca mulatta) monkeys.

Collagen cross-links. Synthesis of immunoreagents for development of assays for deoxypyridinoline, a marker for diagnosis of osteoporosis.

(+)-Deoxypyridinoline (Dpd, 2) is a cross-link of bone collagen, which is released and excreted in urine during process of bone resorption. It has been shown that this bone collagen degradation product, Dpd (2) is a useful marker for diagnosis of osteoporosis and other metabolic bone diseases. In this paper, the design and synthesis of two immunogens (3, 4) via of conjugation of succinimidyl ester (14) to carrier protein, bovine serum albumin, or keyhole limphet hemocyanin, was presented. Additionally, fluorescent (5) and chemiluminescent (6) tracers were prepared from (-)-acid (13) via in situ activation and subsequent reaction with 6-Fln-CH(2)NH(2) (17) or Acr-NH(2) (18) and hydrolysis. The key hapten (-)-acid (13) was prepared by quaternization of 3-hydroxypyridine derivative (S,S)-(-)-11 with iodide (S)-(-)-10 followed by selective hydrolysis. These immunreagents (immunogens 3 and 4 and tracers 5 and 6) are useful for the development of sensitive and high throughput immunoassays, such as FPIA and CLIA for Dpd (2).

Peptide based cytotoxic T-cell vaccines; delivery of multiple epitopes, help, memory and problems.

Synthetic CD8+ cytotoxic T-lymphocyte (CTL) peptide epitope based vaccines are being developed against a number of human diseases. Here we describe extensive preclinical testing of peptide epitope vaccines formulated with a protein as a source of CD4 help and Montanide ISA 720, an adjuvant currently in human clinical trials. Such water-in-oil formulations could effectively co-deliver several peptide epitopes and simultaneously induce multiple independent CTL responses. The efficiency of CTL induction by some peptides was, however, dependent on the aqueous buffer conditions, with poor performance correlating with non-covalent peptide oligomerisation. Any of a number of proteins currently used in human vaccines could supply CD4 help and no difference in CTL induction was obtained if the CD4 response was amnestic or a primary. Peptide immunisation was found to induce long term CTL memory and the recall of protective responses did not depend on an amnestic CD4 response. Slow pyroglutamic acid formation and rapid oxidation of methionine residues was observed in water-in-oil formulations, however, the latter had no effect on CTL induction. These data highlight the need to monitor for potential deleterious chemical events and interpeptide interactions, but illustrate that peptide based vaccination can effectively deliver multiple epitopes, in conjunction with any protein, and induce protective memory.