Two-stage reconstruction of post-traumatic segmental tibia bone loss with nailing.

INTRODUCTION: Treatment of lower extremity segmental bone loss is difficult. Masquelet et al. proposed a two-stage technique: first, debridement and filling of bone loss with an acrylic spacer; second, bone reconstruction by filling with cancellous bone in the space left free (following cement removal) inside the so-called self-induced periosteal membrane. In the originally described technique, the fracture site is stabilized by an external fixator, which remains in place throughout the bone healing process, i.e., often longer than 9 months with all the known disadvantages of this type of assembly. Following the principle of two-stage reconstruction, we modified the technique by reconstructing around an intramedullary-locking nail placed in the first stage. HYPOTHESIS: This technique prevents the mechanical complications related to external fixator use and provides faster resumption of weight-bearing. PATIENTS AND METHODS: Twelve patients were operated for segmental tibial bone loss greater than 6cm resulting from injury (four cases) or aseptic necrosis (one case) or septic necrosis (seven cases). All the patients were operated on in an emergency setting and the first stage was performed before the 2nd week. A free muscle flap (ten patients) or a pediculated fasciocutaneous flap (two patients) was necessary during this first step to cover the site and provide good conditions for secondary bone growth. The follow-up was 39.5 months (range, 12-94 months). RESULTS: Complete weight-bearing was resumed at a mean 4 months. After the second step, all the patients except one had apparently healed (complete weight-bearing with no pain). Five septic complications occurred after the second step, in one case leading to reconstruction failure. Four other patients had infectious complications successfully treated (as of the last follow-up) either by changing the nail in two cases or by prolonged antibiotic therapy in two other cases, with no graft loss. DISCUSSION: The use of the intramedullary nail facilitates the Masquelet technique by allowing the patient to resume weight-bearing more quickly and avoiding secondary fractures. However, the risk of sepsis remains high but can be controlled without compromising the final bone union in four cases out of five. LEVEL OF EVIDENCE: Level IV. Retrospective study.

Hybrid alumina total hip arthroplasty using a press-fit metal-backed socket in patients younger than 55 years. A six- to 11-year evaluation.

Between 1990 and 1992, we implanted 71 hybrid alumina-on-alumina hip arthroplasties in 62 consecutive patients under the age of 55 years, with a mean age of 46 years at surgery. There were 56 primary and 15 secondary procedures. The prostheses involved a cemented titanium alloy stem, a 32 mm alumina head, and a press-fit metal-backed socket with an alumina insert. Three patients (four hips) died from unrelated causes. Four hips had revision surgery for either deep infection, unexplained persistent pain, fracture of the alumina head, or aseptic loosening of the socket. The nine-year survival rate was 93.7% with revision for any cause as the end-point and 98.4% with revision for aseptic loosening as the end-point. The outcome in the surviving patients (50 patients, 57 hips) with a minimum five-year follow-up (mean eight years) was excellent in 47 hips (82.5%), very good in eight (14%), good in one and fair in one. A thin, partial, lucent line, mainly in zone III was present in 38% of the sockets and one socket had a complete lucency less than 1 mm thick. One stem had isolated femoral osteolysis. There was no detectable component migration nor acetabular osteolysis. This hybrid arthroplasty gave satisfactory medium-term results in active patients. The press-fit metal-backed socket appeared to have reliable fixation in alumina-on-alumina hip arthroplasty. The excellent results using cemented fixation of the stem may be related to the low production of wear debris.

Prevention of wear and osteolysis: alumina-on-alumina bearing.

Alumina-on-alumina bearings in total hip replacement have been used for 30 years. Excellent tribologic properties and extra low debris generation could, in theory, provide an answer to osteolysis. A review of the authors' experience with alumina-on-alumina bearings showed that, except in a few bearings that had been loose for a long time, osteolysis was not a problem. Although the cemented titanium stem and the alumina-on-alumina couple were not a problem, fixation of the socket had to be improved. To improve the socket fixation system and to avoid the use of a cemented titanium stem that may have created problems in the long-term, a new design was introduced in 1997. The current authors present the preliminary results of the first 96 hips with cementless fully-coated hydroxyapatite titanium alloy stems and sockets, 32-mm alumina femoral head, and alumina liner, both held with a Morse taper. Ninety-six consecutive hips in 89 patients (57 males, 32 females) with a median age of 46 years (range, 14-72 years) were analyzed. One socket was revised at 4 months because of poor primary stability in a patient with a severe acetabular fracture. One patient experienced a traumatic fracture of the implanted femur 3 weeks after surgery. The mean followup was 16 months (range, 4-38 months). One patient died from rupture of an aneurysm. Ninety-three hips in 86 patients were assessed regarding the clinical and radiologic ratings. Two patients (two hips) were interviewed by telephone. The Merle d'Aubigné rating system was 18 in 65 hips (59 patients), 17 in 25 hips (25 patients), and 16 in three hips (three patients) mainly related to a previous disability including limp, sciatic palsy, or stiffness. Examination of 93 available radiographs revealed no ostelolysis, no radiolucent lines at the last examination, and no subsidence. The level of excellent results, even in this young population, and lack of osteolysis and wear are encouraging, even if the followup is too short to allow any conclusions to be made.

Alumina-on-alumina total hip prostheses in patients 40 years of age or younger.

To avoid the consequences of polyethylene wear in a high-risk population, 128 alumina-on-alumina total hip arthroplasties have been done in 104 consecutive patients. The maximum age of patients was 40 years. The main preoperative diagnoses were osteonecrosis and sequellae of congenital hip dislocation (71% of the hips). The same titanium alloy cemented stem was implanted in all of the hips. Four types of alumina acetabular component fixations were used: a cemented plain alumina socket (41 hips), a screw-in ring with an alumina insert (22 hips), a press-fit plain alumina socket (32 hips), and a press-fit titanium metal back with an alumina insert (33 hips). Eight patients (11 hips) died during the followup period. Sixteen revisions have been documented, 12 for acetabular aseptic loosening, three for bipolar loosening (two of which were septic), and one for unexplained pain. Eighty-eight hips in 74 patients have been followed up radiologically for 2 to 22 years. Wear was unmeasurable. Four additional sockets showed definite migration. The respective survival rates after 7 years were 94.1% for the cemented cup, 88.8% for the screw-in ring, 95.1% for cementless press-fit plain alumina socket and 94.3% for the metal-back press-fit component. The 10-year survival rate was 90.4% for the cemented socket and 88.8% for the screw-in ring. The 15-year survival rate was 78.9% for the cemented socket. Grafting was the only prognostic factor, with a survival rate of 62.6% after 10 years for the hips with a bone graft and of 90.1% for hips without a graft. The alumina-on-alumina bearing surfaces seem to be a valuable alternative to the standard metal-on-polyethylene system for young patients. However, an improvement in socket fixation is required to lengthen the life span of the prosthesis to match the life expectancy of this demanding population.

Press-fit metal-backed alumina sockets: a minimum 5-year followup study.

Two hundred thirty-four consecutive alumina-on-alumina hip replacements using a press-fit metal-backed socket, performed on 214 patients (98 women, 116 men) have been reviewed. These included 201 primary procedures and 33 revision procedures. The median age of the patients at the time of surgery was 62 years (range, 21-83 years). Fourteen patients (16 hips) died from unrelated causes. Eleven patients (11 hips) underwent a total hip arthroplasty revision for recurrent dislocation (one hip), deep infection (two hips), fracture of alumina femoral head (one hip), persistent hip pain (one hip) and aseptic loosening (six hips). The survival rate after 9 years was 93.4% when revision of the prosthesis was considered the end point, and 97.4% if revision of the prosthesis for aseptic loosening was considered the end point. Results were assessed in the surviving patients with a minimal 5-year followup (170 patients, 184 hips). At the median followup of 7.8 years, the average Merle d'Aubigné and Postel score had improved from 11.9- to 17.7. Results were graded as excellent in 148 hips (80.5%), very good in 31 hips (17%), good in two hips (1%), and fair in three hips (1.5%). Radiologic data were documented for 134 patients (143 hips). Three sockets (2%) had a complete and nonprogressive radiolucent line less than 1-mm thick, one stem (0.7%) had lucencies involving five zones, and two stems (1.4%) had isolated femoral osteolysis. Neither component migration nor acetabular osteolysis were detected. A press-fit metal-backed socket may offer a good solution for alumina socket fixation when combined with a careful surgical technique of implantation.

Ceramic/ceramic total hip arthroplasty.

Alumina-on-alumina total hip arthroplasty has been used for 30 years, mainly in Europe. The theoretical advantages of this combination are represented by its remarkable sliding characteristics, its very low wear debris generation, and its sufficient fracture toughness. These advantages are achieved if the material is properly controlled with high density, high purity, and small grains. The authors summarize the results obtained with ceramic/ceramic total hip arthroplasty. Information is provided about in vivo behavior regarding wear debris characterization and quantification, and histological tissue examinations for inflammatory reactions, which were not encountered except when alumina debris was mixed with metal or cement. Modification of socket fixation resulted in improved clinical outcomes. With a press-fit metal shell and an alumina liner utilized for 10 years, the results are excellent especially in a young and active population. Alumina-on-alumina seems at the moment to be one of the best choices when a total hip arthroplasty has to be performed in young and active patients.

Cementless bulk alumina socket: preliminary results at 6 years.

To avoid polyethylene wear observed in total hip replacement, an alumina-alumina combination has been used since 1977. The aim of this study is to report the results of a hybrid alumina-alumina total hip arthroplasty with a cementless press-fit bulk alumina socket and a cemented titanium alloy stem in 55 patients (62 hips) operated on between 1982 and 1990. The bearing surfaces were a 32-mm alumina head articulating within the alumina socket. Four failures occurred: 3 aseptic loosenings of the socket and 1 femoral head fracture. Considering aseptic loosening as the endpoint, the survival rate was 93.2% after 6 years. At a mean of 72.1 months' follow-up, 92.4% of the surviving hips were graded as very good or good using the Merle d'Aubigné-Postel hip score. Radiolucent lines were observed on the acetabular side in 68.1 of the hips. The future of this interface, which is probably fibrous, remains questionable. With the exception of 1 femoral head fracture, all revisions were related to failure of the bony fixation of the socket, and no problem was encountered related to the alumina-alumina friction coupling. Alumina sockets with other types of cementless fixation have therefore been designed and are presently under clinical investigation.