Biodegradability improvement and toxicity reduction of soil washing effluents polluted with atrazine by means of electrochemical pre-treatment: Influence of the anode material.

This work focuses on the partial anodic electro-oxidation of atrazine-polluted soil washing effluents (SWE) in order to reduce its toxicity and to improve its biodegradability. Concretely it has been evaluated the influence of the anodic material used. It is hypothesized that such partial oxidation step could be considered as a pre-treatment for a subsequent biological treatment. At first, atrazine was extracted from a polluted soil by means of a surfactant-aided soil-washing process. Then, four different anodic materials were studied in partial electro-oxidation pre-treatment batch experiments at different electric charges applied: Boron Doped Diamond (BDD), Carbon Felt (CF), and Mixed Metal Oxides Anodes with Iridium and Ruthenium. Atrazine, TOC, surfactant and sulphate species concentrations, as well as changes in toxicity and biodegradability, were monitored during electrochemical experiments, showing important differences in their evolution during the treatment. It was observed that BDD was the most powerful anodic material to completely degrade atrazine. The other materials achieve an atrazine degradation rate about 75%. Regarding mineralization of the organics in SWE, BDD overtakes clearly the rest of anodes tested. CF obtains good atrazine removal but low mineralization results. All the anodes tested slightly reduced the ecotoxicity of the water effluents. About the biodegradability, only the effluent obtained after the pre-treatment with BDD presented a high biodegradability. In this sense, it must be highlighted the mineralization obtained during the BDD pre-treatment was very strong. These results globally indicate that it is necessary to find a compromise between reaching efficient atrazine removal and biodegradability improvement, while also simultaneously avoiding strong mineralization. Additional efforts should be made to find the most adequate working conditions.

Selection of anodic material for the combined electrochemical-biological treatment of lindane polluted soil washing effluents.

This paper focuses on the removal of lindane from soil washing effluents (SWEs) using combined electrochemical -biological processes. In particular, it has been evaluated the influence of the anodic material used in the electrolysis of the SWE on the biodegradability and toxicity of the effluents. Four anode materials were tested: Boron Doped Diamond (BDD), Carbon Felt (CF), and Mixed Metal Oxides Anodes with iridium and ruthenium (MMO-Ir and MMO-Ru). These materials were tested at different current densities and electric current charges applied. Lindane, TOC, sulphate, and chlorine species concentrations were monitored during electrochemical experiments, showing important differences in their evolution during the treatment. In spite of reaching a good removal of lindane with all the materials tested, results showed that Boron Doped Diamond working at 15 mA cm-2 achieved the best biodegradability results in the electrolyzed effluents, because the ratio BOD5/COD increased from 0.2 to 0.5, followed by Carbon Felt anode. Regarding toxicity, Carbon Felt decreased toxicity by 80%. Opposite to what it was expected, MMO anodes did not achieve biodegradability improvement and they only showed reduction in toxicity at high electrical charges.

Combination of bioremediation and electrokinetics for the in-situ treatment of diesel polluted soil: A comparison of strategies.

The aim of this work is to compare different strategies based on electrokinetic soil flushing and bioremediation for the remediation of diesel-polluted soil. Four options were tested at the laboratory scale: single bioremediation (Bio), performed as a control test; a direct combination of electrokinetic soil flushing and biological technologies (EKSF-Bio); EKSF-Bio with daily polarity reversal of the electric field (PR-EKSF-Bio); and a combination of electrokinetic soil flushing and a permeable reactive biological barrier (EKSF-BioPRB). Four batch experiments of 14 days duration were carried out for comparing technologies at room temperature with an electric field of 1.0 V cm(-1) (in EKSF). A diesel degrading microbial consortium was used. The experimental procedure and some specific details, such as the flushing fluids used, varied depending on the strategy. When using the EKSF-Bio option, a high buffer concentration was required to control the pH, causing soil heating, which negatively affected the biological growth and thus the diesel removal. The PR-EKSF-Bio and the EKSF-BioPRB options attained suitable operating conditions and improved the transport processes for biological growth. Polarity reversal was an efficient option for pH, moisture and temperature control. Homogeneous microbial growth was observed, and approximately 20% of the diesel was removed. The BioPRB option was not as efficient as PR-EKSF-Bio in controlling the operating conditions, but the central biobarrier protected the biological activity. Microbial growth was observed not only in the biobarrier but also in a large portion of the soil, and 29% of the diesel was removed in the short remediation test.

Biological permeable reactive barriers coupled with electrokinetic soil flushing for the treatment of diesel-polluted clay soil.

Removal of diesel from spiked kaolin has been studied in the laboratory using coupled electrokinetic soil flushing (EKSF) and bioremediation through an innovative biological permeable reactive barriers (Bio-PRBs) positioned between electrode wells. The results show that this technology is efficient in the removal of pollutants and allows the soil to maintain the appropriate conditions for microorganism growth in terms of pH, temperature, and nutrients. At the same time, EKSF was demonstrated to be a very interesting technology for transporting pollutants, microorganisms and nutrients, although results indicate that careful management is necessary to avoid the depletion of nutrients, which are effectively transported by electro-migration. After two weeks of operation, 30% of pollutants are removed and energy consumption is under 70 kWh m(-3). Main fluxes (electroosmosis and evaporation) and changes in the most relevant parameters (nutrients, diesel, microorganisms, surfactants, moisture conductivity and pH) during treatment and in a complete post-study analysis are studied to give a comprehensive description of the most relevant processes occurring in the soil (pollutant transport and biodegradation).

Thermal degradation of allicin in garlic extracts and its implication on the inhibition of the in-vitro growth of Helicobacter pylori.

Allicin, the main active principle related to Allium sativum chemistry, is considered to be responsible for the bacteriostatic properties of garlic. The work described here has demonstrated the direct implication of the allicin present in solvent-free garlic extracts obtained with ethanol (ethanolic garlic extract, EGE) and acetone (acetonic garlic extract, AGE) in the inhibition of the in-vitro growth of Helicobacter pylori (Hp), the bacterium responsible for serious gastric diseases such as ulcers and even gastric cancer. The evolution of allicin concentration as a function of time and temperature has been the subject of a kinetic study. The reaction order, activation energy, and preexponential factor (in accordance with Arrhenius theory) have been determined for the decomposition process of allicin in these organic media. First-order decomposition, an activation energy of 97.4 kJ/mol, and an Arrhenius preexponential factor of 8.9 x 10(10) s(-1) have been determined for allicin in EGE. For allicin in AGE the kinetic order determined was 1.5, the activation energy 184.5 kJ/mol, and the preexponential factor 3.1 x 10(24) s(-1) (mg/L)(-0.5). The presence or absence of allicin in these garlic products was found to be crucial for the inhibition of the in-vitro growth of Hp, as demonstrated by microbiological analysis for AGE. A relationship has been identified between the effectiveness and durability of the anti-Hp properties shown by AGE and the allicin content of these products. The bacteriostatic properties were active for up to 10 months if the samples were maintained at 6 degrees C.

Allyl-thiosulfinates, the bacteriostatic compounds of garlic against Helicobacter pylori.

Allicin and allyl-methyl plus methyl-allyl thiosulfinate from acetonic garlic extracts (AGE) have been isolated by high-performance liquid chromatography. These compounds have shown inhibition of the in vitro growth of Helicobacter pylori (Hp), the bacterium responsible for serious gastric diseases such as ulcers and even gastric cancer. A chromatographic method was optimized and used to isolate these thiosulfinates. The method developed has allowed the isolation of natural thiosulfinates extracted from garlic by organic solvents and is an easy and cheap methodology that avoids complex synthesis and purification procedures. The capacity and effectiveness of isolated natural thiosulfinates have been tested, and this has enabled the identification of the main compounds responsible for the bacteriostatic activity shown by AGE origin of these kinds of organosulfur compounds along with ethanolic garlic extracts (EGE). Additionally, microbiological analyses have suggested that these compounds show a synergic effect on the inhibition of the in vitro growth of Hp. The results described here facilitate the process of obtaining garlic extracts with optimal bacteriostatic properties. The product is obtained in a way that avoids expensive purification methods and will allow the design of live tests with the aim of investigating the potential for the use of these garlic derivatives in the treatment of patients with Hp infections.

Optimization of Allium sativum solvent extraction for the inhibition of in vitro growth of Helicobacter pylori.

Helicobacter pylori (Hp) is the bacterium responsible for serious gastric diseases such as ulcers and cancer. The work described here involved the study of the inhibitory power of Allium sativum extracts against the in vitro growth of Hp (Hp ivg). We used purple garlic of the "Las Pedroñeras" variety for this study. The effects of two different extraction methods (Soxhlet, stirred tank extractor) and four solvents with different characteristics (water, acetone, ethanol, and hexane) were investigated in terms of the efficiency of the extraction process. Satisfactory results were obtained in most cases in the activity tests, indicating that different extracts gave rise to good inhibitory activity against Hp ivg. The extracts that showed the highest bacteriostatic activities were selected to evaluate the influence of the most important operation variables on the extraction yield: stirring speed, operation time, garlic conditioning, and garlic storage time. The best results were obtained using ethanol and acetone as solvents in a stirred tank. The inhibitory powers of these extracts were compared to those shown by some commercial antibiotics used in the medical treatment of Hp infections. The results of this study show that garlic extracts produce levels of inhibition similar to those of the commercial materials. These extracts were also tested against other common bacteria, and equally satisfactory results were obtained. The research described here represents an important starting point in the fight against and/or prevention of peptic ulcers, as well as other pathologies associated with Hp infections such us gastric cancer. The extracted material can be used by direct application and involves a simple and economical extraction procedure that avoids isolation or purification techniques.