Augmenting Neutrophil Extracellular Traps with Carbonized Polymer Dots: A Potential Treatment for Bacterial Sepsis.

Sepsis is a life-threatening condition that can progress to septic shock as the body's extreme response to pathogenesis damages its own vital organs. Staphylococcus aureus (S. aureus) accounts for 50% of nosocomial infections, which are clinically treated with antibiotics. However, methicillin-resistant strains (MRSA) have emerged and can withstand harsh antibiotic treatment. To address this problem, curcumin (CCM) is employed to prepare carbonized polymer dots (CPDs) through mild pyrolysis. Contrary to curcumin, the as-formed CCM-CPDs are highly biocompatible and soluble in aqueous solution. Most importantly, the CCM-CPDs induce the release of neutrophil extracellular traps (NETs) from the neutrophils, which entrap and eliminate microbes. In an MRSA-induced septic mouse model, it is observed that CCM-CPDs efficiently suppress bacterial colonization. Moreover, the intrinsic antioxidative, anti-inflammatory, and anticoagulation activities resulting from the preserved functional groups of the precursor molecule on the CCM-CPDs prevent progression to severe sepsis. As a result, infected mice treated with CCM-CPDs show a significant decrease in mortality even through oral administration. Histological staining indicates negligible organ damage in the MRSA-infected mice treated with CCM-CPDs. It is believed that the in vivo studies presented herein demonstrate that multifunctional therapeutic CPDs hold great potential against life-threatening infectious diseases.

In Situ Hybridization of Polymeric Curcumin to Arginine-Derived Carbon Quantum Dots for Synergistic Treatment of Bacterial Infections.

Effective infectious keratitis treatment must eliminate the pathogen, reduce the inflammatory response, and prevent persistent damage to the cornea. Infectious keratitis is generally treated with broad-spectrum antibiotics; however, they have the risk of causing corneal epithelial cell damage and drug resistance. In this study, we prepared a nanocomposite (Arg-CQDs/pCur) from arginine (Arg)-derived carbon quantum dots (Arg-CQDs) and polymeric curcumin (pCur). Partial carbonization of arginine hydrochloride in the solid state by mild pyrolysis resulted in the formation of CQDs, which exhibited enhanced antibacterial activity. pCur was formed by the polymerization of curcumin, and further crosslinking reduced its cytotoxicity and improved antioxidative, anti-inflammatory, and pro-proliferative activities. The pCur in situ conjugated with Arg-CQDs to form the Arg-CQDs/pCur nanocomposite, which showed a minimum inhibitory concentration of ca. 10 µg mL-1, which was >100-fold and >15-fold lower than that of the precursor arginine and curcumin, respectively, against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The Arg-CQDs/pCur nanocomposite with combined antibacterial, antioxidative, anti-inflammatory, pro-proliferative properties, and long-term retention on cornea enabled synergistic treatment of bacterial keratitis. In a rat model, it can effectively treat P. aeruginosa-induced bacterial keratitis at a concentration 4000-fold lower than the commercially used drug, Sulmezole eye drops. Arg-CQDs/pCur nanocomposites have great potential for application in antibacterial and anti-inflammatory nanoformulations for clinical use to treat infectious diseases.

Photoswitchable carbon-dot liposomes mediate catalytic cascade reactions for amplified dynamic treatment of tumor cells.

Most biochemical reactions that occur in living organisms are catalyzed by a series of enzymes and proceed in a tightly controlled manner. The development of artificial enzyme cascades that resemble multienzyme complexes in nature is of current interest due to their potential in various applications. In this study, a nanozyme based on photoswitchable carbon-dot liposomes (CDsomes) was developed for use in programmable catalytic cascade reactions. These CDsomes prepared from triolein are amphiphilic and self-assemble into liposome-like structures in an aqueous environment. CDsomes feature excitation-dependent photoluminescence and, notably, can undergo reversible switching between a fluorescent on-state and nonfluorescent off-state under different wavelengths of light irradiation. This switching ability enables the CDsomes to exert photocatalytic oxidase- and peroxidase-like activities in their on- (bright) and off- (dark) states, respectively, resulting in the conversion of oxygen molecules into hydrogen peroxide (H2O2), followed by the generation of active hydroxyl radicals (OH). The two steps of oxygen activation can be precisely controlled in a sequential manner by photoirradiation at different wavelengths. Catalytic reversibility also enables the CDsomes to produce sufficient reactive oxygen species (ROS) to effectively kill tumor cells. Our results reveal that CDsomes is a promising photo-cycling nanozyme for precise tumor phototherapy through regulated programmable cascade reactions.

Catalytic and photoresponsive BiZ/CuxS heterojunctions with surface vacancies for the treatment of multidrug-resistant clinical biofilm-associated infections.

We report a one-pot facile synthesis of highly photoresponsive bovine serum albumin (BSA) templated bismuth-copper sulfide nanocomposites (BSA-BiZ/CuxS NCs, where BiZ represents in situ formed Bi2S3 and bismuth oxysulfides (BOS)). As-formed surface vacancies and BiZ/CuxS heterojunctions impart superior catalytic, photodynamic and photothermal properties. Upon near-infrared (NIR) irradiation, the BSA-BiZ/CuxS NCs exhibit broad-spectrum antibacterial activity, not only against standard multidrug-resistant (MDR) bacterial strains but also against clinically isolated MDR bacteria and their associated biofilms. The minimum inhibitory concentration of BSA-BiZ/CuxS NCs is 14-fold lower than that of BSA-CuxS NCs because their multiple heterojunctions and vacancies facilitated an amplified phototherapeutic response. As-prepared BSA-BiZ/CuxS NCs exhibited substantial biofilm inhibition (90%) and eradication (>75%) efficiency under NIR irradiation. Furthermore, MRSA-infected diabetic mice were immensely treated with BSA-BiZ/CuxS NCs coupled with NIR irradiation by destroying the mature biofilm on the wound site, which accelerated the wound healing process via collagen synthesis and epithelialization. We demonstrate that BSA-BiZ/CuxS NCs with superior antimicrobial activity and high biocompatibility hold great potential as an effective photosensitive agent for the treatment of biofilm-associated infections.

Self-Sufficient and Highly Efficient Gold Sandwich Upconversion Nanocomposite Lasers for Stretchable and Bio-applications.

Multifunctional lanthanide-doped upconversion nanoparticles (UCNPs) have spread their wings in the fields of flexible optoelectronics and biomedical applications. One of the ongoing challenges lies in achieving UCNP-based nanocomposites, which enable a continuous-wave (CW) laser action at ultralow thresholds. Here, gold sandwich UCNP nanocomposites [gold (Au1)-UCNP-gold (Au2)] capable of exhibiting lasing at ultralow thresholds under CW excitation are demonstrated. The metastable energy-level characteristics of lanthanides are advantageous for creating population inversion. In particular, localized surface plasmon resonance-based electromagnetic hotspots in the nanocomposites and the huge enhancement of scattering coefficient for the formation of coherent closed loops due to multiple scattering facilitate the process of stimulated emissions as confirmed by theoretical simulations. The nanocomposites are subjected to stretchable systems for enhancing the lasing action (threshold ∼ 0.06 kW cm-2) via a light-trapping effect. The applications in bioimaging of HeLa cells and antibacterial activity (photothermal therapy) are demonstrated using the newly designed Au1-UCNP-Au2 nanocomposites.

Polydopamine-coated gold nanostar for combined antitumor and antiangiogenic therapy in multidrug-resistant breast cancer.

Cancer combination therapy can improve treatment efficacy and is widely utilized in the biomedical field. In this paper, we propose a facile strategy to develop a polydopamine (PDA)-coated Au nanostar (NS@PPFA) as a multifunctional nanoplatform for cancer targeting and combination therapy. The Au nanostar demonstrated high photothermal conversion efficiency because of the tip-enhanced plasmonic effect. Modification of PDA and folic acid on the NS surface improved its drug-loading efficiency and targeting capability. In vitro, compared with nontargeted cells, targeted breast cancer MCF-7 cells demonstrated efficient uptake of chemodrug-loaded NS-D@PPFA through the receptor-mediated endocytosis pathway. In combination with the photothermal effect induced by near-infrared laser irradiation, controlled payload release could be activated in response to both internal (acid) and external (photothermal) stimuli, leading to an efficient chemo-photothermal action against MCF-7 cells and drug-resistant MCF-7/ADR cells. By contrast, cellular damage was less obvious in normal HaCaT (human skin keratinocytes) and NIH-3T3 cells (murine fibroblasts). In addition, payload-free NS@PPFA exhibited a high binding affinity (Kd = 2.68 × 10-10 M) toward vascular endothelial growth factor (VEGF-A165), which was at least two orders of magnitude stronger than that of highly abundant plasma proteins, such as human serum albumin. Furthermore, in vitro study showed that NS@PPFA could effectively inhibit VEGF-A165-induced proliferation, migration, and tube formation of human umbilical vein endothelial cells, resulting in additional therapeutic benefits for eradicating tumors through a simultaneous antiangiogenic action in chemo-photothermal treatment. The combined treatment also exhibited the lowest microvessel density, leading to a potent antitumor effect in vivo. Overall, our "all-in-one" nanoplatform is highly promising for tumor therapy, enabling effective treatment against multidrug-resistant cancers.

Self-Assembled Chiral Gold Supramolecules with Efficient Laser Absorption for Enantiospecific Recognition of Carnitine.

Stereospecific recognition of chiral molecules is ubiquitous in chemical and biological systems, thus leading to strong demand for the development of enantiomeric drugs, enantioselective sensors, and asymmetric catalysts. In this study, we demonstrate the ratio of d-Cys and l-Cys playing an important role in determining the optical properties and the structures of self-assembled Cys-Au(I) supramolecules prepared through a simple reaction of tetrachloroaurate(III) with chiral cysteine (Cys). The irregularly shaped -[d-Cys-Au(I)] n- or - [l-Cys-Au(I)] n- supramolecules with a size larger than 500 nm possessing strong absorption in the near-UV region and chiroptical characteristics were only obtained from the reaction of Au(III) with d-Cys or l-Cys. On the other hand, spindle-shaped -[d/l-Cys-Au(I)] n- supramolecules were formed when using Au(III) with mixtures of d/l-Cys. Our results have suggested that Au(I)···Au(I) aurophilic interactions, and stacked hydrogen bonding and zwitterionic interactions between d/l-Cys ligands are important in determining their structures. The NaBH4-mediated reduction induces the formation of photoluminescent gold nanoclusters (Au NCs) embedded in the chiral -[d-Cys-Au(I)] n- or -[l-Cys-Au(I)] n- supramolecules with a quantum yield of ca. 10%. The as-formed Au NCs/-[d-Cys-Au(I)] n- and Au NCs/-[l-Cys-Au(I)] n- are an enantiospecific substrate that can trap l-carnitine and d-carnitine, respectively, and function as a nanomatrix for surface-assisted laser desorption/ionization mass spectrometry (LDI-MS). The high absorption efficiency of laser energy, analyte-binding capacity, and homogeneity of the Au NCs/-[Cys-Au(I)] n- allow for quantitation of enantiomeric carnitine down to the micromolar regime with high reproducibility. The superior efficiency of the Au NCs/-[d-Cys-Au(I)] n- substrate has been further validated by quantification of l-carnitine in dietary supplements with accuracy and precision. Our study has opened a new avenue for chiral quantitation of various analytes through LDI-MS using metal nanocomposites consisting of NCs and metal-ligand complexes.

Synthesis of aluminum oxide supported fluorescent gold nanodots for the detection of silver ions.

Photoluminescent gold nanodots (Au NDs) on aluminum oxide nanoparticles (Al2O3 NPs) with the emission wavelengths ranging from 510 to 630 nm are unveiled. Orange Al2O3 NP@AuNDs show high selectivity and sensitivity towards Ag(+) ions by metallophilic Ag(+)-Au(+) interactions and induced fluorescence quenching of Au NDs.

Peroxidase-mimic bismuth-gold nanoparticles for determining the activity of thrombin and drug screening.

Fibrinogen-modified bismuth-gold nanoparticles (Fib-Bi-Au NPs) are prepared and used as enzyme mimics for the H(2)O(2)-mediated reaction with Amplex Red (AR), which is further employed for determining thrombin activity and drug screening.

Gold nanoparticle-aluminum oxide adsorbent for efficient removal of mercury species from natural waters.

We report a new adsorbent for removal of mercury species. By mixing Au nanoparticles (NPs) 13 nm in diameter with aluminum oxide (Al(2)O(3)) particles 50-200 µm in diameter, Au NP-Al(2)O(3) adsorbents are easily prepared. Three adsorbents, Al(2)O(3), Au NPs, and Au NP-Al(2)O(3), were tested for removal of mercury species [Hg(2+), methylmercury (MeHg(+)), ethylmercury (EtHg(+)), and phenylmercury (PhHg(+))]. The Au NP adsorbent has a higher binding affinity (dissociation constant; K(d) = 0.3 nM) for Hg(2+) ions than the Al(2)O(3) adsorbent (K(d) = 52.9 nM). The Au NP-Al(2)O(3) adsorbent has a higher affinity for mercury species and other tested metal ions than the Al(2)O(3) and Au NP adsorbents. The Au NP-Al(2)O(3) adsorbent provides a synergic effect and, thus, is effective for removal of most tested metal ions and organic mercury species. After preconcentration of mercury ions by an Au NP-Al(2)O(3) adsorbent, analysis of mercury ions down to the subppq level in aqueous solution was performed by inductively coupled plasma mass spectrometry (ICP-MS). The Au NP-Al(2)O(3) adsorbent allows effective removal of mercury species spiked in lake water, groundwater, and seawater with efficiencies greater than 97%. We also used Al(2)O(3) and Au NP-Al(2)O(3) adsorbents sequentially for selectively removing Hg(2+) and MeHg(+) ions from water. The low-cost, effective, and stable Au NP-Al(2)O(3) adsorbent shows great potential for economical removal of various mercury species.

Selective photothermal therapy for mixed cancer cells using aptamer-conjugated nanorods.

Safe and effective photothermal therapy depends on efficient delivery of heat for killing cells and molecular specificity for targeting cells. To address these requirements, we have designed an aptamer-based nanostructure which combines the high absorption efficiency of Au-Ag nanorods with the target specificity of molecular aptamers, a combination resulting in the development of an efficient and selective therapeutic agent for targeted cancer cell photothermal destruction. Most nanomaterials, such as gold nanoshells or nanorods (NRs), require a relatively high power of laser irradiation (1 x 10 (5)-1 x 10 (10) W/m (2)). In contrast, the high absorption characteristic of our Au-Ag NRs requires only 8.5 x 10 (4) W/m (2) laser exposure to induce 93 (+/-11)% cell death of NR-aptamer-labeled cells. Aptamers, the second component of the nanostructure, are generated from a cell-SELEX (systematic evolution of ligands by exponential enrichment) process and can be easily selected for specific recognition of individual tumor cell types without prior knowledge of the biomarkers for the cell. When tested with both cell suspensions and artificial solid tumor samples, these aptamer conjugates were shown to have excellent hyperthermia efficiency and selectivity. Under a specific laser intensity and duration of laser exposure, about 50 (+/-1)% of target (CEM) cells were severely damaged, while more than 87 (+/-1)% of control (NB-4) cells remained intact in a suspension cell mixture. These results indicate that the Au-Ag nanorod combination offers selective and efficient photothermal killing of targeted tumor cells, thus satisfying the two key challenges noted above. Consequently, for future in vivo application, it is fully anticipated that the tumor tissue will be selectively destroyed at laser energies which will not harm the surrounding normal tissue.

Capillary electrophoretic separation of biologically active amines and acids using nanoparticle-coated capillaries.

This manuscript describes dynamic coating of capillaries with poly(L-lysine) (PLL) and silica nanoparticles (SiO2 NPs) and use of the as-prepared capillaries for the separation of biogenic amines and acids by CE in conjunction with LIF detection. The directions of EOF are controlled by varying the outmost layer of the capillaries with PLL and SiO2 NPs, respectively. Over the pH range 3.0-5.0, the (PLL-SiO2NP)n-PLL capillaries have an EOF toward the anodic end and are more suitable for the separation of acids with respect to speed, while the (PLL-SiO2NP)n capillaries have an EOF toward the cathodic end and are more suitable for the separation of biogenic amines regarding speed and sensitivity. The separations of standard solutions containing five amines and two acids by CE with LIF detection using (PLL-SiO2NP)2-PLL and (PLL-SiO2NP)3 capillaries were accomplished within 10 and 7 min, providing plate numbers of 3.8 and 5.0x10(4) plates/m for 5-hydroxytryptamine (5-HT), respectively. The LODs for 5-HT and 5-hydroxyindole-3-acetic acid (5-HIAA) are 32 and 2 nM and 0.2 and 1.5 nM when using the (PLL-SiO2NP)2-PLL and (PLL-SiO2NP)3 capillaries, respectively. Identification and quantification of 5-HIAA, homovanillic acid, and DL-vanillomandelic acid in urine samples from a male before and after drinking green tea were tested to validate practicality of the present approach. The results show that the (PLL-SiO2NP)2-PLL capillary provides greater resolving power, while the (PLL-SiO2NP)3 capillary provides better sensitivity, higher efficiency, and longer durability for the separation of the amines and acids.

CE with sequential light-emitting diode-induced fluorescence and electro-chemiluminescence detections for the determination of amino acids and alkaloids.

This paper describes the determination of alkaloids and amino acids (AAs) using CE in conjunction with sequential light-emitting diode-induced fluorescence (LEDIF) and electrochemiluminescence (ECL) detections. In the CE-LEDIF-ECL system, the ECL detector was located in the outlet of the capillary, while the LEDIF detector was positioned 12 cm from the outlet. Naphthalene-2,3-dicarboxaldehyde (NDA) was used to form fluorescent AA-NDA derivatives from AAs possessing primary amino groups, while Ru(bpy)(3) (2+) was used to obtain ECL signals for analytes having secondary and tertiary amino groups. In the presence of poly(ethylene oxide), we accomplished the CE-LEDIF-ECL separation of a mixture of 12 AA-NDA derivatives, anabasine, nicotine, and proline within 11 min. This low-cost CE-LEDIF-ECL system allows the analysis of these AA-NDA derivatives and alkaloids at concentrations in the ranges of 49 nM-0.2 microM and 0.66-4.7 microM, respectively. We applied our CE-LEDIF-ECL system to the analysis of a urine sample and also to tobacco extracts. We obtained good qualitative and quantitative results when using this method with these analytes: the RSDs were below 3.0 and 2.8%, respectively. This CE-LEDIF-ECL system provides the advantages of high efficiency, speed, and sensitivity for the analysis of analytes possessing amino groups.

Determination of aristolochic acid in Chinese herbal medicine by capillary electrophoresis with laser-induced fluorescence detection.

We have demonstrated the analysis of aristolochic acids (AAs) that are naturally occurring nephrotoxin and carcinogen by capillary electrophoresis in conjunction with laser-induced fluorescence detection (CE-LIF). Owing to lack of intrinsic fluorescence characteristics of oxidized AAs (OAAs), reduction of the analytes by iron powder in 10.0 mM HCl is required prior to CE analysis. The reduced AAs (RAAs) exhibit fluorescence at 477 nm when excited at 405 nm using a solid-state blue laser. By using 50.0 mM sodium tetraborate (pH 9.0) containing 10.0 mM SDS, the determination of AA-I and AA-II by CE-LIF has been achieved within 12 min. The CE-LIF provides the LODs of 8.2 and 5.4 nM for AA-I and AA-II, respectively. The simple CE-LIF method has been validated by the analysis of 61 Chinese herbal samples. Prior to CE analysis, OAAs were extracted by using 5.0 mL MeOH, and then the extracts were subjected to centrifugation at 3,000 rpm for 5 min. After reduction, extraction, and centrifugation, the supernatants were collected and subjected to CE analysis. Of the 61 samples, 14 samples contain AA-I and AA-II, as well as 10 samples contain either AAI or AAII. The relative standard deviation (RSD) values of the migration times for AA-I and AA-II are less than 2.5% and 2.1% for three consecutive measurements of each sample. The RSD values for the peak heights corresponding to AA-I and AA-II in most samples are about 8.0% and 10.0%, respectively. The result shows that the present CE-LIF approach is sensitive, simple, efficient, and accurate for the determination of AAs in real samples.

Light-emitting diode-based indirect fluorescence detection for simultaneous determination of anions and cations in capillary electrophoresis.

This report presents simultaneous analysis of cations and anions by capillary electrophoresis (CE) in conjunction with indirect fluorescence detection using a blue light-emitting diode (LED), based on the displacement of fluorescein with anionic EDTA-metal complexes and anions. A new focusing system combined with a plastic lens and a 40x objective was developed and used effectively to focus the diverging beam of the LED on the capillary. The optimum compositions for simultaneous analysis of metal ions and anions are the samples prepared in 5 mM borate, pH 9.2, containing 2 mM EDTA and the background electrolytes (BGEs) consisting of 5 mM borate buffer, 5 microM fluorescein, and 1 microM NaCl at pH 9.2. Using this pre-capillary complexation method, the analysis of a sample containing five metal ions and eight anions was accomplished in 8 min, with the relative standard deviation values for the migration times less than 2.0%. The peak heights against the concentrations of the metal ions and anions are linear in 10-1000 and 50-2000 microM, with correlation coefficients better than 0.998, and 0.982, respectively. The limits of detection at a signal-to-noise ratio 3 of up to 14.6 microM for formate and as low as 3.7 microM for Ni2+. The results of the analyses of pond water and a Chinese herbal soup present the advantages of this method, including simplicity, rapidity, reproducibility, and low costs.