Semiochemical delivery systems based on natural polymers to attract sand flies (Diptera: Psychodidae).

BACKGROUND: The successful use of semiochemicals to attract insects to traps is based on research on the most suitable compounds and their release profiles over time. Based on the group's promising results, matrices with a more adequate release profile and more eco-friendly properties for the release of 1-hexanol were developed. To use a more suitable prototype in the field, the most promising systems were added to a capsule and evaluated in a wind tunnel. Behavioral experiments were performed using the sand fly species, Lutzomyia longipalpis, to evaluate the efficacy of the proposed system. METHODS: Different delivery systems were developed by varying the polymer (gellan gum and pectin) ratio, crosslinker (aluminum chloride) concentration, and glutaraldehyde removal.The delivery systems were loaded with 1-hexanol, and their release profiles were evaluated using gravimetric analysis under ambient and high-humidity conditions. When the matrix system was placed inside a plastic container, modulations in the active release profile were observed and the system could be reused. Actid attraction behaviors of the sand fly species, Lu. longipalpis, were evaluated in a wind tunnel when exposed to 1-hexanol-loaded release systems at different times. RESULTS: Among the four formulations evaluated, System 2 (gellan gum and pectin in a 1:1 ratio with 5% aluminum chloride) exhibited the most promising release profile, with greater uniformity and longer compound release time. The maximum 1-hexanol release uniformity was achieved over a longer time, mainly every 24 h, under both ambient and high-humidity conditions. System 2 can be reused at least once with the same structure. The wind tunnel trials exhibited efficient activation and attraction of Lu. longipalpis to 1-hexanol after 24, 48, and 72 h in System 2 placed inside the capsules. CONCLUSIONS: The polymeric matrix supplemented with 1-hexanol and introduced in plastic capsules showed promising results in attracting sand flies. This system can be used as a solution for other attractive compounds as well as in other applications where their release needs to be controlled or prolonged.

The role of polysaccharides from natural resources to design oral insulin micro- and nanoparticles intended for the treatment of Diabetes mellitus: A review.

Oral administration of insulin (INS) would represent a revolution in the treatment of diabetes, considering that this route mimics the physiological dynamics of endogenous INS. Nano- and microencapsulation exploiting the advantageous polysaccharides properties has been considered an important technological strategy to protect INS against harsh conditions of gastrointestinal tract, in the same time that improve the permeability via transcellular and/or paracellular pathways, safety and in some cases even selectivity for targeting delivery of INS. In fact, some polysaccharides also give to the systems functional properties such as pH-responsiveness, mucoadhesiveness under specific physiological conditions and increased intestinal permeability. In general, all polysaccharides can be functionalized with specific molecules becoming more selective to the cells to which INS is delivered. The present review highlights the advances in the past 10 years on micro- and nanoencapsulation of INS exploiting the unique natural properties of polysaccharides, including chitosan, starch, alginate, pectin, and dextran, among others.

Oral nanoparticles based on gellan gum/pectin for colon-targeted delivery of resveratrol.

Nanoparticles based on gellan gum/pectin blends were designed for colon-targeted release of resveratrol (RES). Their impact on drug release rates and permeability were evaluated using Caco-2 cell model and mucus secreting triple co-culture model. Polymeric nanoparticles (PNP) were successfully prepared by nebulization/ionotropic gelation, achieving high drug loading (>80%). PNP were spherical with a low positive charge density (+5mV) and exhibited diameters of around 330 nm. Developed PNP were able to promote effective modulation of drug release rates, so that only 3% of RES was released in acidic media over 2 h, and, in pH 6.8, the drug was released in a sustained manner, reaching 85% in 30 h. The permeability of RES-loaded PNP in the Caco-2 model was 0.15%, while in the triple co-culture model, in the presence of mucus, it reached 5.5%. The everted gut sac experiment corroborated the low permeability of RES-loaded PNP in the presence or absence of mucus and highlighted their high ability to interact with the intestinal tissue. Results indicate that the novel PNP developed in this work are safe and promising carriers for controlled delivery of RES at the colon.

Mucoadhesive films based on gellan gum/pectin blends as potential platform for buccal drug delivery.

Films of gellan gum:pectin blends were prepared by solvent casting method. Gellan gum:pectin mass ratios were varied (4:1; 1:1; 1:4) at different concentrations (3% or 4%) and glycerol was used as plasticizer (1 or 2%). The films were thin (18-30 µm), translucent, flexible, and homogeneous. The surface pH was suitable for buccal application. All films reached high mechanical resistance and the mucoadhesive ability of them was evidenced. High ratio of gellan gum improved the mechanical resistance and the mucoadhesion of the films as well as the control of drug release rates. The films did not disintegrate in simulate saliva up to 24 h and curcumin release could be sustained up to 12 h. The set of data evidence that the films designed in this work represent a potential platform for buccal drug delivery.

Mucoadhesive beads of gellan gum/pectin intended to controlled delivery of drugs.

Gellan gum/pectin beads were prepared by ionotropic gelation, using Al(3+) as crosslinker. High yield (92.76%) and entrapment efficiency (52.22-88.78%) were reached. Beads exhibited high circularity (0.730-0.849) and size between 728.95 and 924.56 µm. Particle size and circularity was increased by raising polymer and crosslinker concentrations. Polymers ratio did not influence beads properties. The materials stability and the absence of drug-polymers interactions were evidenced by thermal analysis and FTIR. The high beads mucoadhesiveness was evidenced by in vitro and ex vivo tests. The erosion of beads was greater in acid media while swelling was more pronounced in pH 7.4. Drug release was dependent on pH in which samples 11H1-3, 11H1-5 and 41H1-3 released only 34%, 20% and 22% of ketoprofen in pH 1.2, while in pH 7.4 the drug release was sustained up to 360 min. Korsmeyer-Peppas model demonstrated that drug release occurred according to super case-II transport.

Films from resistant starch-pectin dispersions intended for colonic drug delivery.

Free films were obtained by the solvent casting method from retrograded starch-pectin dispersions at different polymer proportions and concentrations with and without plasticizer. Film forming dispersions were characterized according to their hardness, birefringence and rheological properties. The polymer dispersions showed a predominantly viscous behavior (G″>G') and the absence of plasticizers lead to building of stronger structures, while the occurrence of Maltese crosses in the retrograded dispersions indicates the occurrence of a crystalline organization. Analyses of the films included mechanical properties, thickness, superficial and cross sectional morphology, water vapor permeability, liquid uptake ability, X-ray diffractometry, in vitro dissolution and enzymatic digestion. The high resistant starch content (65.8-96.8%) assured the resistance of materials against enzymatic digestion by pancreatin. Changes in the X-ray diffraction patterns indicated a more organized and crystalline structure of free films in relation to isolated polymers. Increasing of pectin proportion and pH values favored the dissolution and liquid uptake of films. Films prepared with lower polymer concentration presented better barrier function (WVP and mechanical properties).

Preparation and characterization of free films of high amylose/pectin mixtures cross-linked with sodium trimetaphosphate.

High amylose and pectin were mixed at 1:1 mass ratio and cross-linked with sodium trimetaphosphate (STMP) in alkaline medium. Films were prepared from aqueous dispersions of these cross-linked polymer blend at three different concentrations (3, 4 and 5%), by solvent casting method. Characterization of the films included thickness, surface morphology, water uptake, water vapor permeability (WVP), tensile strength measurements and enzymatic digestion. The cross-linking allowed to obtain films with improved mechanical properties and reduced WVP. The high resistance to enzymatic digestion exhibited by these films represents a promising approach to their application in the development of colon drug delivery systems.